Comprehensive chemical characterization of PM2.5 in the large East Mediterranean-Middle East city of Beirut, Lebanon.

The chemical composition of PM2.5 at two sites in Lebanon, a country in the East Mediterranean - Middle East region, is investigated in the spring and summer seasons. The average PM2.5 concentrations were of (29 ± 16) µg/m3 for Beirut urban site and (32 ± 14) µg/m3 for Beirut suburban site. This study showed that the geographic location of the East Mediterranean region, such as its proximity to the Mediterranean Sea and the dust storm intrusion are a significant contributor to the high PM levels from natural sources, which cannot be mitigated, rendering the PM2.5 WHO annual Air Quality guideline unattainable due to high natural background, which also applies to the entire Middle East region. Turkey and Eastern Europe are the dominant origin of air masses throughout our sampling days, suggesting the long-range transport as an important potential contributor to the high observed concentrations of V, Ni, and sulfate in this region most probably in other East Mediterranean countries than Lebanon too. Main local sources determined through the chemical speciation including organics are road transport, resuspension of dust and diesel private generators. A health risk assessment of airborne metals was performed and the carcinogenic risk for all the metals exceeded by 42 (adults) and 14 (children) times the acceptable risk level (10-6) at both sites. Vanadium was the predominant carcinogenic metal, emphasizing the need to replace energy production with cleaner energy on a regional level and highlighting the severe impact of air pollution on the health of inhabitants in this region's main cities.

Lamellar orientation at the surface of isotactic polystyrene thin films analyzed by sum frequency generation spectroscopy.

Analyzing the orientation of polymeric crystalline lamella at the surface of thin films can be challenging. Even though atomic force microscopy (AFM) is often sufficient for this analysis, there are cases when imaging is not sufficient to confidently determine lamellar orientation. Here, we used sum frequency generation (SFG) spectroscopy to analyze the lamellar orientation at the surface of semi-crystalline isotactic polystyrene (iPS) thin films. The SFG orientation analysis indicated that the iPS chains are oriented perpendicular to the substrate (flat-on lamellar orientation), which was confirmed by AFM. By analyzing the evolution of the SFG spectral features with the progress of crystallization, we demonstrated that the ratios of the SFG intensities of the phenyl ring resonances are a good indication of the surface crystallinity. Furthermore, we explored the challenges associated with SFG measurements of heterogeneous surfaces, which is commonly present in many semi-crystalline polymeric films. To the best of our knowledge, this is the first time that the surface lamellar orientation of semi-crystalline polymeric thin films was determined by SFG. Also, this work pioneers in reporting the surface conformation of semi-crystalline and amorphous iPS thin films by SFG and in linking the SFG intensity ratios to the progress of the crystallization and the surface crystallinity. This study demonstrates the potential applicability of SFG spectroscopy in the conformational analysis of polymeric crystalline structures at interfaces and opens the way to the investigation of more complex polymeric structures and crystalline arrangements, especially for the case of buried interfaces, where AFM imaging is not an option.

Source apportionment of PM2.5 using organic/inorganic markers and emission inventory evaluation in the East Mediterranean-Middle East city of Beirut.

Source contributions to PM2.5 concentrations were evaluated in Greater Beirut (Lebanon), a typical East Mediterranean-Middle East (EMME) city, using Positive Matrix Factorization with two approaches. The first approach included only inorganic species (PMF-trad) and the other approach added organic markers (PMF-org). PMF-org identified 4 additional sources, and large discrepancies in contributions were observed for some major sources found in both approaches, highlighting the importance of including organic markers. The traffic factor was underestimated in PMF-trad by 2 to 7 folds. Moreover, results showed that this city is prone to high desert dust concentrations originating from uncontrollable dust storm events, like all cities in the Middle East. A PM2.5 mitigation plan taking into account the potency of the identified sources was developed. Sources like diesel generators or traffic presented smaller contributions in term of mass compared to desert dust, however the health impact of the latter is relatively small and actions should target sources with the highest potency. Local emission inventories in the EMME region are scarce and studies typically rely on global emission inventories for local air quality management plans, but these inventories significantly underestimate Beirut's road transport emissions by more than an order of magnitude.

Influence of Polymer Molecular Weight on Chain Conformation at the Polystyrene/Silver Interface.

The dependence between the conformation of polystyrene (PS) and its molecular weight (Mw) in the vicinity of a metal interface was investigated by sum frequency generation (SFG) spectroscopy. Tilt angles θ ≥ 50° (the angle between the C2 axis of the pendant phenyl ring and the surface normal) were observed for all samples because of the interaction between the aromatic rings and the metal surface. Furthermore, it was found that θ decreases with increasing Mw for PS samples ranging from 20 × 103 g/mol to 400 × 103 g/mol. The intensity of the backbone SFG signal was higher for high Mw PS, compared to low Mw PS, indicating a greater number of backbone interactions with the silver substrate surface for the high Mw sample. These structural differences are driven by different entropic and enthalpic contributions to the free energy of adsorption for different polymer molecular weights. Differences in the polymer free volume and in the relative amount of chain ends with higher mobility may also influence the chain conformation. These results suggest that important interfacial properties of polymeric thin films, such as adhesion and wettability, could be tailored by modifying the polymer Mw to achieve the desired interfacial conformation.

Contrasting Reactive Organic Carbon Observations in the Southeast United States (SOAS) and Southern California (CalNex).

Despite the central role of reactive organic carbon (ROC) in the formation of secondary species that impact global air quality and climate, our assessment of ROC abundance and impacts is challenged by the diversity of species that contribute to it. We revisit measurements of ROC species made during two field campaigns in the United States: the 2013 SOAS campaign in forested Centreville, AL, and the 2010 CalNex campaign in urban Pasadena, CA. We find that average measured ROC concentrations are about twice as high in Pasadena (73.8 µgCsm-3) than in Centreville (36.5 µgCsm-3). However, the OH reactivity (OHR) measured at these sites is similar (20.1 and 19.3 s-1). The shortfall in OHR when summing up measured contributions is 31%, at Pasadena and 14% at Centreville, suggesting that there may be a larger reservoir of unmeasured ROC at the former site. Estimated O3 production and SOA potential (defined as concentration × yield) are both higher during CalNex than SOAS. This analysis suggests that the ROC in urban California is less reactive, but due to higher concentrations of oxides of nitrogen and hydroxyl radicals, is more efficient in terms of O3 and SOA production, than in the forested southeastern U.S.

Volatile chemical products emerging as largest petrochemical source of urban organic emissions.

A gap in emission inventories of urban volatile organic compound (VOC) sources, which contribute to regional ozone and aerosol burdens, has increased as transportation emissions in the United States and Europe have declined rapidly. A detailed mass balance demonstrates that the use of volatile chemical products (VCPs)-including pesticides, coatings, printing inks, adhesives, cleaning agents, and personal care products-now constitutes half of fossil fuel VOC emissions in industrialized cities. The high fraction of VCP emissions is consistent with observed urban outdoor and indoor air measurements. We show that human exposure to carbonaceous aerosols of fossil origin is transitioning away from transportation-related sources and toward VCPs. Existing U.S. regulations on VCPs emphasize mitigating ozone and air toxics, but they currently exempt many chemicals that lead to secondary organic aerosols.

Impact of Thermal Decomposition on Thermal Desorption Instruments: Advantage of Thermogram Analysis for Quantifying Volatility Distributions of Organic Species.

We present results from a high-resolution chemical ionization time-of-flight mass spectrometer (HRToF-CIMS), operated with two different thermal desorption inlets, designed to characterize the gas and aerosol composition. Data from two field campaigns at forested sites are shown. Particle volatility distributions are estimated using three different methods: thermograms, elemental formulas, and measured partitioning. Thermogram-based results are consistent with those from an aerosol mass spectrometer (AMS) with a thermal denuder, implying that thermal desorption is reproducible across very different experimental setups. Estimated volatilities from the detected elemental formulas are much higher than from thermograms since many of the detected species are thermal decomposition products rather than actual SOA molecules. We show that up to 65% of citric acid decomposes substantially in the FIGAERO-CIMS, with ∼20% of its mass detected as gas-phase CO2, CO, and H2O. Once thermal decomposition effects on the detected formulas are taken into account, formula-derived volatilities can be reconciled with the thermogram method. The volatility distribution estimated from partitioning measurements is very narrow, likely due to signal-to-noise limits in the measurements. Our findings indicate that many commonly used thermal desorption methods might lead to inaccurate results when estimating volatilities from observed ion formulas found in SOA. The volatility distributions from the thermogram method are likely the closest to the real distributions.

Quantification of the sources and composition of particulate matter by field-deployable mass spectrometry: implications for air quality and public health.

Airborne particulate matter less than 2.5 µm in diameter (PM2.5) negatively impacts air quality in cities throughout the world where it has been linked to increased cardiac and respiratory morbidity and mortality. For this reason PM2.5 standards have been established by many countries and the World Health Organization. However, these guidelines are regularly exceeded in North America, Europe and East Asia. While PM2.5 is often reported as a single atmospheric species, it is actually a mixture of organic and inorganic compounds. The organic fraction, termed organic aerosol (OA), contributes approximately 20-70% of the PM2.5 mass globally, and OA itself is a complex mixture of thousands of compounds. Characterizing the chemical properties of OA represents a major analytical challenge that has motivated the development of a range of new instruments. The focus of this perspective is the use of field-deployable mass spectrometers and in particular the Aerodyne Aerosol Mass Spectrometer (AMS) for chemically characterizing submicron particles. Field measurements of the composition of PM2.5 are directly relevant to evaluating its health impact because reductions in life expectancy due to PM2.5 vary according to composition. In addition, AMS measurements are especially useful for characterizing OA. The sources of OA are not well understood as evidenced by the performance of many air quality models, including those run by government agencies, which lack accurate and well constrained parameterizations for simulating secondary OA concentrations in urban regions. Given that OA is an important component of the total PM2.5 mass, this uncertainty makes accurate evaluation of the impact of PM2.5 on public health difficult, especially when evaluating future mitigation strategies. The development of the AMS has been a critical step towards addressing this public health challenge in that it provides quantitative data regarding particulate matter and OA concentration and composition that can be used to constrain uncertainties in air quality models.

Semivolatile POA and parameterized total combustion SOA in CMAQv5.2: impacts on source strength and partitioning.

Mounting evidence from field and laboratory observations coupled with atmospheric model analyses shows that primary combustion emissions of organic compounds dynamically partition between the vapor and particulate phases, especially as near-source emissions dilute and cool to ambient conditions. The most recent version of the Community Multiscale Air Quality model version 5.2 (CMAQv5.2) accounts for the semivolatile partitioning and gas-phase aging of these primary organic aerosol (POA) compounds consistent with experimentally derived parameterizations. We also include a new surrogate species, potential secondary organic aerosol from combustion emissions (pcSOA), which provides a representation of the secondary organic aerosol (SOA) from anthropogenic combustion sources that could be missing from current chemical transport model predictions. The reasons for this missing mass likely include the following: (1) unspeciated semivolatile and intermediate volatility organic compound (SVOC and IVOC, respectively) emissions missing from current inventories, (2) multigenerational aging of organic vapor products from known SOA precursors (e.g., toluene, alkanes), (3) underestimation of SOA yields due to vapor wall losses in smog chamber experiments, and (4) reversible organic compounds-water interactions and/or aqueous-phase processing of known organic vapor emissions. CMAQ predicts the spatially averaged contribution of pcSOA to OA surface concentrations in the continental United States to be 38.6 and 23.6 % in the 2011 winter and summer, respectively. Whereas many past modeling studies focused on a particular measurement campaign, season, location, or model configuration, we endeavor to evaluate the model and important uncertain parameters with a comprehensive set of United States-based model runs using multiple horizontal scales (4 and 12 km), gas-phase chemical mechanisms, and seasons and years. The model with representation of semivolatile POA improves predictions of hourly OA observations over the traditional nonvolatile model at sites during field campaigns in southern California (CalNex, May-June 2010), northern California (CARES, June 2010), the southeast US (SOAS, June 2013; SEARCH, January and July, 2011). Model improvements manifest better correlations (e.g., the correlation coefficient at Pasadena at night increases from 0.38 to 0.62) and reductions in underprediction during the photochemically active afternoon period (e.g., bias at Pasadena from -5.62 to -2.42 µg m-3). Daily averaged predictions of observations at routine-monitoring networks from simulations over the continental US (CONUS) in 2011 show modest improvement during winter, with mean biases reducing from 1.14 to 0.73µg m-3, but less change in the summer when the decreases from POA evaporation were similar to the magnitude of added SOA mass. Because the model-performance improvement realized by including the relatively simple pcSOA approach is similar to that of more-complicated parameterizations of OA formation and aging, we recommend caution when applying these more-complicated approaches as they currently rely on numerous uncertain parameters. The pcSOA parameters optimized for performance at the southern and northern California sites lead to higher OA formation than is observed in the CONUS evaluation. This may be due to any of the following: variations in real pcSOA in different regions or time periods, too-high concentrations of other OA sources in the model that are important over the larger domain, or other model issues such as loss processes. This discrepancy is likely regionally and temporally dependent and driven by interferences from factors like varying emissions and chemical regimes.

Review of Urban Secondary Organic Aerosol Formation from Gasoline and Diesel Motor Vehicle Emissions.

Secondary organic aerosol (SOA) is formed from the atmospheric oxidation of gas-phase organic compounds leading to the formation of particle mass. Gasoline- and diesel-powered motor vehicles, both on/off-road, are important sources of SOA precursors. They emit complex mixtures of gas-phase organic compounds that vary in volatility and molecular structure-factors that influence their contributions to urban SOA. However, the relative importance of each vehicle type with respect to SOA formation remains unclear due to conflicting evidence from recent laboratory, field, and modeling studies. Both are likely important, with evolving contributions that vary with location and over short time scales. This review summarizes evidence, research needs, and discrepancies between top-down and bottom-up approaches used to estimate SOA from motor vehicles, focusing on inconsistencies between molecular-level understanding and regional observations. The effect of emission controls (e.g., exhaust aftertreatment technologies, fuel formulation) on SOA precursor emissions needs comprehensive evaluation, especially with international perspective given heterogeneity in regulations and technology penetration. Novel studies are needed to identify and quantify "missing" emissions that appear to contribute substantially to SOA production, especially in gasoline vehicles with the most advanced aftertreatment. Initial evidence suggests catalyzed diesel particulate filters greatly reduce emissions of SOA precursors along with primary aerosol.

On molecular chirality within naturally occurring secondary organic aerosol particles from the central Amazon Basin.

In this perspectives article, we reflect upon the existence of chirality in atmospheric aerosol particles. We then show that organic particles collected at a field site in the central Amazon Basin under pristine background conditions during the wet and dry seasons consist of chiral secondary organic material. We show how the chiral response from the aerosol particles can be imaged directly without the need for sample dissolution, solvent extraction, or sample preconcentration. By comparing the chiral-response images with optical images, we show that chiral responses always originate from particles on the filter, but not all aerosol particles produce chiral signals. The intensity of the chiral signal produced by the size resolved particles strongly indicates the presence of chiral secondary organic material in the particle. Finally, we discuss the implications of our findings on chiral atmospheric aerosol particles in terms of climate-related properties and source apportionment.

Structure of the cetyltrimethylammonium surfactant at fused silica/aqueous interfaces studied by vibrational sum frequency generation.

Utilizing vibrational sum frequency generation (SFG), we characterized the structure of adsorbed cetyltrimethylammonium chloride (CTAC) at the silica/aqueous interface in the presence of 10 to 500 mM NaCl and as a function of surfactant surface coverage. For low ionic strengths (10 mM NaCl), results indicate that adsorbed aggregates do not change conformation with increasing surface coverage. Instead, the surfactant adsorbs as micelle-like structures at concentrations considerably lower than surface saturation and the CMC. At high ionic strengths (300-500 mM NaCl), the structure of the adlayer is considerably different: The SFG results indicate that for 30 microM bulk CTAC the surfactant packs with fewer gauche defects in the hydrocarbon backbone, which is attributed to reduced Coulomb repulsion between the positively charged surfactant headgroups, and the results also indicate that CTAC adsorbs as monomers at low surface coverage but then rearranges into aggregates at higher surface coverage.

An optical voltmeter for studying cetyltrimethylammonium interacting with fused silica/aqueous interfaces at high ionic strength.

Electrostatics and counterions play important roles in many supramolecular processes, including surfactant adsorption and aggregation at interfaces. Here, we assess their influence on how the common surfactant cetyltrimethylammonium (CTA) interacts with fused silica/aqueous interfaces by determining thermodynamic, kinetic, and electrostatic parameters for CTA adsorption across a range of NaCl concentrations (10-500 mM NaCl) using second harmonic generation (SHG). Using vibrational sum frequency generation (SFG), we demonstrate that vibrationally resonant contributions and nonresonant background contributions to the SFG signal intensity that depend on the interfacial potential can be quantified simultaneously during the adsorption process, which provides insight into the nonequilibrium dynamics of CTA adsorption. By analyzing the adsorption free energies as a function of interfacial potential at these four salt concentrations, the charge density per adsorbate is determined, indicating that CTA coadsorbs with counterions at a ratio of approximately 4 to 3 (i.e., 4 CTA(+) ions for every 3 Cl(-) ion). The chemical (i.e., non-Coulombic) portion of the free energy is found to dominate the overall free energy of adsorption, indicating that CTA adsorption at these ionic strengths is primarily driven by the favorable hydrophobic interactions between interdigitated surfactant hydrocarbon chains in the adsorbed aggregate. By applying Gouy-Chapman-Stern theory to our data, an average charge density of 2.8(3) x 10(13) charges/cm(2), which corresponds to 0.7 to 1.7 molecules/nm(2), was obtained for the four NaCl concentrations.

Interaction of nitrate, barium, strontium and cadmium ions with fused quartz/water interfaces studied by second harmonic generation.

Inorganic anions and cations are ubiquitous in environmental chemistry. Here, we use second harmonic generation to track the interaction of the environmentally important metal cations barium, strontium, and cadmium and the nitrate anion with fused quartz/water interfaces at pH 7. Using a dynamic flow system, we assess the extent of reversibility in the binding process and report the absolute number density of adsorbed cations, their charge densities, and their free energies of adsorption. We also present resonantly enhanced second harmonic generation experiments that show that nitrate is surface active and report the free energies and binding constants for the adsorption process. The second harmonic generation spectrum of surface-bound nitrate shows a new adsorption band that cuts further into the solar spectrum than nitrate in the aqueous or solid state. The results that we obtain for all four inorganic ions and the implications for tropospheric and aquatic chemistry as well as geochemistry are discussed in the context of fundamental science as well as pollutant transport models.

Anion chelation by amido acid functionalized fused quartz/water interfaces studied by nonlinear optics.

We report resonantly enhanced surface second harmonic generation (SHG) measurements to track the interaction of the EPA priority toxic metal pollutant chromium(VI) with fused quartz/water interfaces containing tailor-made amino acids that serve as model systems for environmental and biological interfaces. chi3 measurements of amido acid functionalized fused quartz/water interfaces are consistent with two acid-base equilibria, suggesting the formation of a laterally hydrogen-bonded environment similar to what is observed for aliphatic carboxylic acids. Chromate adsorption isotherms recorded at pH 7 are suggestive of an intramolecular chelation mechanism that becomes important when four or more hydrogen-bonding moieties are displayed toward the incoming chromate. The strong binding affinities of the amido acid functionalized fused quartz/water interfaces toward chromate are consistent with nearly 50% slower transport rates with respect to free-flowing groundwater, indicating that, in the absence of redox processes, peptide materials in heterogeneous geochemical environments can significantly increase chromate residence times. The strong evidence for synergistic effects dominating the interactions of chromate with surface-bound amido acids indicates that chemical complexity can be systematically addressed using tailor-made organic surfaces and interfaces.