RESUMEN
HY-072808 is a novel phosphodiesterase 4 inhibitor clinically used for topical atopic dermatitis treatment. Cytochrome P450 enzymes are involved in transforming it into major metabolite ZZ-24. An efficient UPLC-MS/MS method was established to detect HY-072808 and ZZ-24 in plasma and skin tissues of minipigs.One-step protein precipitation was performed with acetonitrile. Subsequently, elution was served with a methanol and water gradient containing 0.1% formic acid for 3.5 min. The plasma and skin tissue concentrations of HY-072808 and ZZ-24 showed good linearity from 0.200 to 200 ng/mL.The experimental minipigs exhibited low systemic exposure and bioavailability of 3.1-7.6% after transdermal application of 1-4% HY-072808 ointment. Multiple topical administrations over seven consecutive days showed a minor accumulation in systemic exposure, with accumulation factors of 2.3 and 4.0 for HY-072808 and ZZ-24, respectively.The distribution of HY-072808 ointment among different cortical layers in minipigs was studied for the first time. Following transdermal application of 2% HY-072808 ointment, the concentration in plasma and skin tissues in the order of epidermis > dermis > subcutaneous tissue ≈ subcutaneous muscle ≈ plasma; at 48 h after the administration, the epidermis and dermis still had a high concentration of the drug.
Asunto(s)
Dermatitis Atópica , Animales , Porcinos , Porcinos Enanos/metabolismo , Preparaciones Farmacéuticas/metabolismo , Dermatitis Atópica/tratamiento farmacológico , Dermatitis Atópica/metabolismo , Cromatografía Liquida , Disponibilidad Biológica , Cromatografía Líquida con Espectrometría de Masas , Pomadas/uso terapéutico , Espectrometría de Masas en Tándem/métodosRESUMEN
Desloratadine, a second-generation histamine H1 receptor antagonist, has established itself as a first-line drug for the treatment of allergic diseases. Despite its effectiveness, desloratadine exhibits an antagonistic effect on muscarinic M3 receptor, which can cause side effects such as dry mouth and urinary retention, ultimately limiting its clinical application. Herein, we describe the discovery of compound â ¢-4, a novel H1 receptor antagonist with significant H1 receptor antagonistic activity (IC50 = 24.12 nM) and enhanced selectivity towards peripheral H1 receptor. In particular, â ¢-4 exhibits reduced M3 receptor inhibitory potency (IC50 > 10,000 nM) and acceptable hERG inhibitory activity (17.6 ± 2.1 µM) compare with desloratadine. Additionally, â ¢-4 exhibits favorable pharmacokinetic properties, as well as in vivo efficacy and safety profiles. All of these reveal that â ¢-4 has potential to emerge as a novel H1 receptor antagonist for the treatment of allergic diseases. More importantly, the compound â ¢-4 (HY-078020) has recently been granted clinical approval.
Asunto(s)
Antagonistas de los Receptores Histamínicos H1 , Hipersensibilidad , Loratadina/análogos & derivados , Humanos , Antagonistas de los Receptores Histamínicos H1/farmacología , Antagonistas de los Receptores Histamínicos H1/uso terapéutico , Receptores Histamínicos H1/uso terapéutico , Loratadina/farmacología , Loratadina/uso terapéutico , Hipersensibilidad/tratamiento farmacológicoRESUMEN
Covalent organic framework (COF) materials have been considered as disruptive membrane materials for gas separation. The dominant one-step method for COF nanosheet synthesis often suffers from coupling among polymerization, assembly and crystallization processes. Herein, we propose a two-step method comprising a framework assembly step and functional group switching step to synthesize COF nanosheets and the corresponding COF membranes. In the first step, the pristine COF-316 nanosheets bearing cyano groups are prepared via interfacial polymerization. In the second step, the cyano groups in COF-316 nanosheets were switched into amidoxime groups or carboxyl groups. Through the vacuum-assisted self-assembly method, the COF nanosheets were fabricated into membranes with a thickness below 100 nm. Featuring numerous mass transport channels and homogeneous distribution of functional groups, the amidoxime-modified COF-316 membrane demonstrated excellent separation performance, with a permeance above 500 GPU and a CO2/N2 selectivity above 50. The two-step method may inspire the rational design and fabrication of organic framework membranes.
RESUMEN
Background/aims: Psychological and physiological stress can cause gastrointestinal motility disorders. Acupuncture has a benign regulatory effect on gastrointestinal motility. However, the mechanisms underlying these processes remain unclear. Methods: Herein, we established a gastric motility disorder (GMD) model in the context of restraint stress (RS) and irregular feeding. The activity of emotional center-central amygdala (CeA) GABAergic neurons and gastrointestinal center-dorsal vagal complex (DVC) neurons were recorded by electrophysiology. Virus tracing and patch clamp analysis of the anatomical and functional connection between the CeAGABA â dorsal vagal complex pathways were performed. Optogenetics inhibiting or activating CeAGABA neurons or the CeAGABA â dorsal vagal complex pathway were used to detect changes in gastric function. Results: We found that restraint stress induced delayed gastric emptying and decreased gastric motility and food intake. Simultaneously, restraint stress activated CeA GABAergic neurons, inhibiting dorsal vagal complex neurons, with electroacupuncture (EA) reversing this phenomenon. In addition, we identified an inhibitory pathway in which CeA GABAergic neurons project into the dorsal vagal complex. Furthermore, the use of optogenetic approaches inhibited CeAGABA neurons and the CeAGABA â dorsal vagal complex pathway in gastric motility disorder mice, which enhanced gastric movement and gastric emptying, whereas activation of the CeAGABA and CeAGABA â dorsal vagal complex pathway mimicked the symptoms of weakened gastric movement and delayed gastric emptying in naïve mice. Conclusion: Our findings indicate that the CeAGABA â dorsal vagal complex pathway may be involved in regulating gastric dysmotility under restraint stress conditions, and partially reveals the mechanism of electroacupuncture.
RESUMEN
We report a covalent organic framework (COF) induced seeding strategy to fabricate metal-organic framework (MOF) membranes. Contrary to graphene oxide nuclei-depositing substrate, COF substrate has uniform pore size, high microporosity and abundant functional groups. We designed a series of charged COF nanosheets to induce the formation of ZIF-8@COF nanosheet seeds with high aspect ratio over 150, which were readily processed into a compact and uniform seed layer. The resulting ZIF-8 membranes with thickness down to 100â nm exhibit an ultrahigh C3 H6 /C3 H8 separation performance and superior long-term stability. Our strategy is also validated by fabricating ultrathin ZIF-67 and UiO-66 membranes.
RESUMEN
Hydrogen-bonded organic frameworks (HOFs) have emerged as a new class of crystalline porous materials, and their application in membrane technology needs to be explored. Herein, for the first time, we demonstrated the utilization of HOF-based mixed-matrix membrane for CO2 separation. HOF-21, a unique metallo-hydrogen-bonded organic framework material, was designed and processed into nanofillers via amine modulator, uniformly dispersing with Pebax polymer. Featured with the mix-bonded framework, HOF-21 possessed moderate pore size of 0.35 nm and displayed excellent stability under humid feed gas. The chemical functions of multiple binding sites and continuous hydrogen-bonded network jointly facilitated the mass transport of CO2. The resulting HOF-21 mixed-matrix membrane exhibited a permeability above 750 Barrer, a selectivity of ~ 40 for CO2/CH4 and ~ 60 for CO2/N2, surpassing the 2008 Robeson upper bound. This work enlarges the family of mixed-matrix membranes and lays the foundation for HOF membrane development.
RESUMEN
Quantum emitters in two-dimensional hexagonal boron nitride (hBN) are of significant interest because of their unique photophysical properties, such as single-photon emission at room temperature, and promising applications in quantum computing and communications. The photoemission from hBN defects covers a wide range of emission energies but identifying and modulating the properties of specific emitters remain challenging due to uncontrolled formation of hBN defects. In this study, more than 2000 spectra are collected consisting of single, isolated zero-phonon lines (ZPLs) between 1.59 and 2.25 eV from diverse sample types. Most of ZPLs are organized into seven discretized emission energies. All emitters exhibit a range of lifetimes from 1 to 6 ns, and phonon sidebands offset by the dominant lattice phonon in hBN near 1370 cm-1. Two chemical processing schemes are developed based on water and boric acid etching that generate or preferentially interconvert specific emitters, respectively. The identification and chemical interconversion of these discretized emitters should significantly advance the understanding of solid-state chemistry and photophysics of hBN quantum emission.
RESUMEN
In this study, a series of structurally novel N-(benzene sulfonyl) acetamide derivatives were designed, synthesized, and biologically evaluated as COX-2/5-LOX/TRPV1 multitarget inhibitors for anti-inflammatory and analgesic therapy. Among them, 9a and 9b displayed favorable COX-2 (9a IC50 = 0.011 µM, 9b IC50 = 0.023 µM), 5-LOX (9a IC50 = 0.046 µM, 9b IC50 = 0.31 µM) and TRPV1 (9a IC50 = 0.008 µM, 9b IC50 = 0.14 µM) inhibitory activities. The pharmacokinetic (PK) study of 9a in SD rats at the dosage of 10 mg/kg demonstrated a high oral exposure, an acceptable clearance and a favorable bioavailability (Cmax = 5807.18 ± 2657.83 ng/mL, CL = 3.24 ± 1.47 mL/min/kg, F = 96.8 %). Further in vivo efficacy studies illustrated that 9a was capable of ameliorating formalin-induced pain and inhibiting capsaicin-induced ear edema.
Asunto(s)
Analgésicos , Benceno , Ratas , Animales , Ciclooxigenasa 2/metabolismo , Ratas Sprague-Dawley , Analgésicos/farmacología , Analgésicos/uso terapéutico , Antiinflamatorios/farmacología , Antiinflamatorios/uso terapéutico , Inhibidores de la Ciclooxigenasa 2/farmacología , Inhibidores de la Ciclooxigenasa 2/uso terapéutico , Amidas/uso terapéutico , Acetamidas/farmacología , Acetamidas/uso terapéutico , Relación Estructura-Actividad , Edema/inducido químicamente , Edema/tratamiento farmacológico , Simulación del Acoplamiento Molecular , Antiinflamatorios no Esteroideos/farmacología , Canales Catiónicos TRPVRESUMEN
HY072808 is a novel phosphodiesterase 4 inhibitor currently under clinical development to treat atopic dermatitis. The first step is to address the pharmacokinetics and safety after topical administration of HY072808 ointments in healthy humans. In this study, we developed a highly sensitive liquid chromatography-tandem mass spectrometry method to determine plasma HY072808 and its active metabolite, ZZ24, in tiny amounts. The plasma samples were prepared using a simple liquid-liquid extraction method. Liquid chromatographic separation was achieved by gradient elution. The MS/MS quantification was performed in positive ion mode via multiple reaction monitoring. The method showed satisfactory linearity from 10 to 4,000 pg/ml for HY072808 and ZZ24. There was no significant interference from blank plasma. The method was validated for accuracy and precision, matrix effect and extraction recovery, dilution integrity, injection carryover and stability according to the related guidelines of the regulatory authorities. The HY072808 and ZZ24 concentrations in human plasma from a clinical trial were determined using this method. In conclusion, the validated method was robust and could be utilized to support the clinical development of HY072808.
Asunto(s)
Dermatitis Atópica , Inhibidores de Fosfodiesterasa 4 , Espectrometría de Masas en Tándem , Humanos , Cromatografía Liquida/métodos , Dermatitis Atópica/tratamiento farmacológico , Reproducibilidad de los Resultados , Espectrometría de Masas en Tándem/métodos , Inhibidores de Fosfodiesterasa 4/farmacocinéticaRESUMEN
Polymers of intrinsic microporosity (PIMs), integrating unique microporous structure and solution-processability, are one class of the most promising membrane materials for energy-efficient gas separations. However, the micropores generated from inefficient chain packing often exhibit wide pore size distribution, making it very challenging to achieve efficient olefin/paraffin separations. Here, we propose a coordination-driven reconstruction (CDR) strategy, where metal ions are incorporated into amidoxime-functionalized PIM-1 (AO-PIM) to in situ generate coordination crosslinking networks. By varying the type and content of metal ions, the resulting crosslinking structures can be optimized, and the molecular sieving capability of PIM membranes can be dramatically enhanced. Particularly, the introduction of alkali or alkaline earth metals renders more precise micropores contributing to superior C3H6/C3H8 separation performance. K+ incorporated AO-PIM membranes exhibit a high ideal C3H6/C3H8 selectivity of 50, surpassing almost all the reported polymer membranes. Moreover, the coordination crosslinking structure significantly improves the membrane stability under higher pressure as well as the plasticization resistant performance. We envision that this straightforward and generic CDR strategy could potentially unlock the potentials of PIMs for olefin/paraffin separations and many other challenging gas separations.
RESUMEN
Covalent organic framework (COF) membranes with tunable ordered channels and free organic groups hold great promise in molecular separations owing to the synergy of physical and chemical microenvironments. Herein, we develop a defect engineering strategy to fabricate COF membranes for efficient CO2 separation. Abundant amino groups are in situ generated on the COF nanosheets arising from the missing-linker defects during the reactive assembly of amine monomer and mixed aldehyde monomers. The COF nanosheets are assembled to fabricate COF membranes. Amino groups, as the CO2 facilitated transport carriers, along with ordered channels endow COF membrane with high CO2 permeances exceeding 300â GPU and excellent separation selectivity of 80 for CO2 /N2 , and 54 for CO2 /CH4 mixed gas under humidified state. Our defect engineering strategy offers a facile approach to generating free organic functional groups in COF membranes and other organic framework membranes for diverse chemical separations.
RESUMEN
Porous graphene and other atomically thin 2D materials are regarded as highly promising membrane materials for high-performance gas separations due to their atomic thickness, large-scale synthesizability, excellent mechanical strength, and chemical stability. When these atomically thin materials contain a high areal density of gas-sieving nanoscale pores, they can exhibit both high gas permeances and high selectivities, which is beneficial for reducing the cost of gas-separation processes. Here, recent modeling and experimental advances in nanoporous atomically thin membranes for gas separations is discussed. The major challenges involved, including controlling pore size distributions, scaling up the membrane area, and matching theory with experimental results, are also highlighted. Finally, important future directions are proposed for real gas-separation applications of nanoporous atomically thin membranes.
RESUMEN
Molecular-sieving membranes from metal-organic frameworks (MOFs) are promising candidates for separating olefin/paraffin mixtures, a critical demand in sustainable chemical processes and a grand challenge in molecular separation. Currently, the inherent lattice flexibility of MOFs severely compromises their precise sieving ability. Here, a proof-of-concept of "alloy" membranes (AMs), which are fabricated by incorporating quaternary ammonium (QA)-functionalized covalent organic frameworks (COFs) into a zeolitic imidazolate framework-8 (ZIF-8) matrix is demonstrated. The Coulomb force between the COFs and the ZIF-8 restricts the linker rotation of the ZIF-8, generating a distinct alloying effect, by which the lattice rigidity of ZIF-8 can be conveniently tuned through varying the content of the COFs, similar to the flexible-to-rigid transition in aluminum alloy manufacturing. Such an alloying effect confers the AM's superior propylene/propane separation performance, with a propylene/propane separation factor surpassing 200 and a propylene permeance of 168 GPU. Hopefully, the AMs concept and the concomitant alloying effect can update the connotation of mixed matrix membranes and stimulate the re-envisioning about the design paradigm and development of advanced membranes for energy-efficient separations.
RESUMEN
Polymers that extend covalently in two dimensions have attracted recent attention1,2 as a means of combining the mechanical strength and in-plane energy conduction of conventional two-dimensional (2D) materials3,4 with the low densities, synthetic processability and organic composition of their one-dimensional counterparts. Efforts so far have proven successful in forms that do not allow full realization of these properties, such as polymerization at flat interfaces5,6 or fixation of monomers in immobilized lattices7-9. Another frequently employed synthetic approach is to introduce microscopic reversibility, at the cost of bond stability, to achieve 2D crystals after extensive error correction10,11. Here we demonstrate a homogenous 2D irreversible polycondensation that results in a covalently bonded 2D polymeric material that is chemically stable and highly processable. Further processing yields highly oriented, free-standing films that have a 2D elastic modulus and yield strength of 12.7 ± 3.8 gigapascals and 488 ± 57 megapascals, respectively. This synthetic route provides opportunities for 2D materials in applications ranging from composite structures to barrier coating materials.
RESUMEN
In this work, a novel structural series of brain-penetrant GluN2B NMDAR antagonists were designed, synthesized and biologically evaluated as anti-stroke therapeutic agents via merging the structures of NBP and known GluN2B ligands. Approximately half of them exhibited superior neuroprotective activity to NBP against NMDA-induced neurotoxicity in hippocampal neurons at 10 µM, and compound 45e and 45f exerted equipotent activity to ifenprodil, an approved GluN2B- selective NMDAR antagonist. In particular, 45e, with the most potent neuroprotective activity throughout this series, displayed dramatically enhanced activity (Ki = 3.26 nM) compared to ifenprodil (Ki = 14.80 nM) in Radioligand Competitive Binding Assay, and remarkable inhibition (IC50 = 79.32 nM) against GluN1/GluN2B receptor-mediated current in Patch Clamp Assay. Meanwhile, 45e and its enantiomers exhibited low inhibition rate against the current mediated by other investigated receptors at the concentration of 10 µM, indicating their favorable selectivity for GluN1/GluN2B. In the rat model of middle cerebral artery ischemia (MCAO), 45e exerted comparable therapeutic efficacy to ifenprodil at the same dosage. In addition to the attractive in vitro and in vivo potency, 45e displayed a favorable bioavailability (F = 63.37%) and an excellent brain exposure. In further repeated dose toxicity experiments, compound 45e demonstrated an acceptable safety profile. With the above merits, 45e is worthy of further functional investigation as a novel anti-stroke therapeutic agent.
Asunto(s)
Benzofuranos/farmacología , Encéfalo/efectos de los fármacos , Descubrimiento de Drogas , Fármacos Neuroprotectores/farmacología , Receptores de N-Metil-D-Aspartato/antagonistas & inhibidores , Accidente Cerebrovascular/tratamiento farmacológico , Benzofuranos/síntesis química , Benzofuranos/química , Encéfalo/metabolismo , Relación Dosis-Respuesta a Droga , Humanos , Estructura Molecular , Fármacos Neuroprotectores/síntesis química , Fármacos Neuroprotectores/química , Receptores de N-Metil-D-Aspartato/metabolismo , Relación Estructura-ActividadRESUMEN
Gas separation is of significant importance for many industrial processes including chemical purification, carbon capture, and fuel production [...].
RESUMEN
Single-layer graphene containing molecular-sized in-plane pores is regarded as a promising membrane material for high-performance gas separations due to its atomic thickness and low gas transport resistance. However, typical etching-based pore generation methods cannot decouple pore nucleation and pore growth, resulting in a trade-off between high areal pore density and high selectivity. In contrast, intrinsic pores in graphene formed during chemical vapor deposition are not created by etching. Therefore, intrinsically porous graphene can exhibit high pore density while maintaining its gas selectivity. In this work, the density of intrinsic graphene pores is systematically controlled for the first time, while appropriate pore sizes for gas sieving are precisely maintained. As a result, single-layer graphene membranes with the highest H2 /CH4 separation performances recorded to date (H2 permeance > 4000 GPU and H2 /CH4 selectivity > 2000) are fabricated by manipulating growth temperature, precursor concentration, and non-covalent decoration of the graphene surface. Moreover, it is identified that nanoscale molecular fouling of the graphene surface during gas separation where graphene pores are partially blocked by hydrocarbon contaminants under experimental conditions, controls both selectivity and temperature dependent permeance. Overall, the direct synthesis of porous single-layer graphene exploits its tremendous potential as high-performance gas-sieving membranes.
RESUMEN
Predictable and tunable etching of angstrom-scale nanopores in single-layer graphene (SLG) can allow one to realize high-performance gas separation even from similar-sized molecules. We advance toward this goal by developing two etching regimes for SLG where the incorporation of angstrom-scale vacancy defects can be controlled. We screen several exposure profiles for the etchant, controlled by a multipulse millisecond treatment, using a mathematical model predicting the nucleation and pore expansion rates. The screened profiles yield a narrow pore-size-distribution (PSD) with a majority of defects smaller than missing 16 carbon atoms, suitable for CO2/N2 separation, attributing to the reduced pore expansion rate at a high pore density. Resulting nanoporous SLG (N-SLG) membranes yield attractive CO2 permeance of 4400 ± 2070 GPU and CO2/N2 selectivity of 33.4 ± 7.9. In the second etching regime, by limiting the supply of the etchant, the nanopores are allowed to expand while suppressing the nucleation events. Extremely attractive carbon capture performance marked with CO2 permeance of 8730 GPU, and CO2/N2 selectivity of 33.4 is obtained when CO2-selective polymeric chains are functionalized on the expanded nanopores. We show that the etching strategy is uniform and scalable by successfully fabricating high-performance centimeter-scale membrane.
RESUMEN
Fabricating covalent organic frameworks (COFs) membranes with tight structure, which can fully utilize well-defined framework structure and thus achieve superior conduction performance, remains a grand challenge. Herein, through molecular precursor engineering of COFs, we reported the fabrication of tight COFs membrane with the ever-reported highest hydroxide ion conductivity over 200â mS cm-1 at 80 °C, 100 % RH. Six quaternary ammonium-functionalized COFs were synthesized by assembling functional hydrazides and different aldehyde precursors. In an organic-aqueous reaction system, the impact of the aldehyde precursors with different size, electrophilicity and hydrophilicity on the reaction-diffusion process for fabricating COFs membranes was elucidated. Particularly, more hydrophilic aldehydes were prone to push the reaction zone from the interface region to the aqueous phase of the reaction system, the tight membranes were thus fabricated via phase-transfer polymerization process, conferring around 4-8 times the anion conductivity over the loose membranes via interfacial polymerization process.
RESUMEN
The development of nanoporous single-layer graphene membranes for gas separation has prompted increasing theoretical investigations of gas transport through graphene nanopores. However, computer simulations and theories that predict gas permeances through individual graphene nanopores are not suitable to describe experimental results, because a realistic graphene membrane contains a large number of nanopores of diverse sizes and shapes. With this need in mind, here, we generate nanopore ensembles in silico by etching carbon atoms away from pristine graphene with different etching times, using a kinetic Monte Carlo algorithm developed by our group for the isomer cataloging problem of graphene nanopores. The permeances of H2, CO2, and CH4 through each nanopore in the ensembles are predicted using transition state theory based on classical all-atomistic force fields. Our findings show that the total gas permeance through a nanopore ensemble is dominated by a small fraction of large nanopores with low energy barriers of pore crossing. We also quantitatively predict the increase of the gas permeances and the decrease of the selectivities between the gases as functions of the etching time of graphene. Furthermore, by fitting the theoretically predicted selectivities to the experimental ones reported in the literature, we show that nanopores in graphene effectively expand as the temperature of permeation measurement increases. We propose that this nanopore "expansion" is due to the desorption of contaminants that partially clog the graphene nanopores. In general, our study highlights the effects of the pore size and shape distributions of a graphene nanopore ensemble on its gas separation properties and calls into attention the potential effect of pore-clogging contamination in experiments.