RESUMEN
The application of low-density polyethylene (LDPE) has been confined to packaging applications due to its inadequate mechanical and tribological characteristics. We propose enhancing LDPE by integrating hard carbon spheres (CSs) to improve its strength, frictional characteristics, and wear resistance. LDPE/CS composites were created by blending LDPE with varying CS amounts (0.5-8 wt.%). Analysis using scanning electron microscopy and Raman spectroscopy confirmed CS presence in the LDPE matrix, with X-ray diffraction showing no microstructural changes post-blending. Thermal characterization exhibited notable improvements in thermal stability (~4%) and crystallinity (~7%). Mechanical properties such as hardness and Young's modulus were improved by up to 4% and 24%, respectively. Tribological studies on different composite samples with varying surface roughness under various load and speed conditions revealed the critical role of surface roughness in reducing friction by decreasing real contact area and adhesive interactions between asperities. Increased load and speed amplified shear stress on asperities, possibly leading to deformation and failure. Notably, integrating CSs into LDPE, starting at 1 wt.%, effectively reduced friction and wear. The composite with the highest loading (8 wt.%) displayed the most significant tribological enhancement, achieving a remarkable 75% friction reduction and a substantial 78% wear reduction.
RESUMEN
Third-degree burn injuries pose a significant health threat. Safer, easier-to-use, and more effective techniques are urgently needed for their treatment. We hypothesized that covalently bonded conjugates of fatty acids and tripeptides can form wound-compatible hydrogels that can accelerate healing. We first designed conjugated structures as fatty acid-aminoacid1-amonoacid2-aspartate amphiphiles (Cn acid-AA1-AA2-D), which were potentially capable of self-assembling into hydrogels according to the structure and properties of each moiety. We then generated 14 novel conjugates based on this design by using two Fmoc/tBu solid-phase peptide synthesis techniques; we verified their structures and purities through liquid chromatography with tandem mass spectrometry and nuclear magnetic resonance spectroscopy. Of them, 13 conjugates formed hydrogels at low concentrations (≥0.25% w/v), but C8 acid-ILD-NH2 showed the best hydrogelation and was investigated further. Scanning electron microscopy revealed that C8 acid-ILD-NH2 formed fibrous network structures and rapidly formed hydrogels that were stable in phosphate-buffered saline (pH 2-8, 37 °C), a typical pathophysiological condition. Injection and rheological studies revealed that the hydrogels manifested important wound treatment properties, including injectability, shear thinning, rapid re-gelation, and wound-compatible mechanics (e.g., moduli Gâ³ and G', ~0.5-15 kPa). The C8 acid-ILD-NH2(2) hydrogel markedly accelerated the healing of third-degree burn wounds on C57BL/6J mice. Taken together, our findings demonstrated the potential of the Cn fatty acid-AA1-AA2-D molecular template to form hydrogels capable of promoting the wound healing of third-degree burns.
Asunto(s)
Ácido Aspártico , Caprilatos , Ratones , Animales , Ratones Endogámicos C57BL , Isoleucina , Leucina , Hidrogeles/farmacología , Ácidos Grasos , Cicatrización de HeridasRESUMEN
We report the effect of tail-tethering on vesiculation and complete unbinding of bilayered membranes. Amphiphilic molecules of a bolalipid, resembling the tail-tethered molecular structure of archaeal lipids, with two identical zwitterionic phosphatidylcholine headgroups self-assemble into a large flat lamellar membrane, in contrast to the multilamellar vesicles (MLVs) observed in its counterpart, monopolar nontethered zwitterionic lipids. The antivesiculation is confirmed by small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cyro-TEM). With the net charge of zero and higher bending rigidity of the membrane (confirmed by neutron spin echo (NSE) spectroscopy), the current membrane theory would predict that membranes should stack with each other (aka "bind") due to dominant van der Waals attraction, while the outcome of the nonstacking ("unbinding") membrane suggests that the theory needs to include entropic contribution for the nonvesicular structures. This report pioneers an understanding of how the tail-tethering of amphiphiles affects the structure, enabling better control over the final nanoscale morphology.
Asunto(s)
Membrana Dobles de Lípidos , Fosfatidilcolinas , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Fosfatidilcolinas/química , Estructura Molecular , Microscopía Electrónica de Transmisión , Membrana Dobles de Lípidos/químicaRESUMEN
Polymeric amine encapsulation in high surface area MCM-41 particles for CO2 capture is well established but has the drawback of leaching out the water-soluble polymer upon exposure to aqueous environments. Alternatively, chemical (covalent) grafting amine functional groups from an alkoxysilane such as 3-aminopropyltriethoxysilane (APTES) on MCM-41 offer better stability against this drawback. However, the diffusional restriction exhibited by the narrow uniform MCM-41 pores (2-4 nm) may impede amine functionalization of the available silanol groups within the inner mesoporous core. This leads to incomplete amine functionalization and could reduce the CO2 adsorption capacity in such materials. Our concept to improve access to the MCM-41 interior is based on the incorporation of nanostraws with larger inner diameter (15-30 nm) to create a hierarchical porosity and enhance the molecular transport of APTES. Halloysite nanotubes (HNT) are used as tubular straws that are integrated into the MCM-41 matrix using an aerosol-assisted synthesis method. Characterization results show that the intrinsic structure of MCM-41 remains unaltered after the incorporation of the nanostraws and amine functionalization. At an optimal APTES loading of 0.5 g (X = 2.0), the amine-functionalized composite of MCM-41 with straws (APTES/M40H) has a 20% higher adsorption capacity than the amine-modified MCM-41 (APTES/MCM-41) adsorbent. Furthermore, the CO2 adsorption capacity APTES/M40H doubles that of APTES/MCM-41 when normalized based on the composition of MCM-41 in the composite particle with straws. The facile integration of nanostraws in MCM-41 leading to hierarchical porosities could be effective toward the mitigation of diffusional restriction in porous materials with potential for other catalytic and adsorption technologies.
RESUMEN
Background: Bladder urothelial carcinoma (BLCA) is the second prevalent genitourinary carcinoma globally. N7-methylguanosine (m7G) is important for tumorigenesis and progression. This study aimed to build a predictive model for m7G-related long non-coding RNAs (lncRNAs), elucidate their role in the tumor immune microenvironment (TIME), and predict immunotherapy response in BLCA. Methods: We first used univariate Cox regression and coexpression analyses to identify m7G-related lncRNAs. Next, the prognostic model was built by utilizing LASSO regression analysis. Then, the prognostic significance of the model was examined utilizing Kaplan-Meier survival analysis, receiver operating characteristic (ROC) curves, nomogram, and univariate, multivariate Cox regression. We also analyzed Gene set enrichment analyses (GSEA), immune analysis and principal component analysis (PCA) in risk groups. To further predict immunotherapy effectiveness, we evaluated the predictive ability for immunotherapy in 2 risk groups and clusters using tumor immune dysfunction and exclusion (TIDE) score and Immunophenoscore (IPS). Results: Seven lncRNAs related to m7G were used to create a model. The calibration plots for the model suggested a strong fit with the prediction of overall survival (OS). The area under the curve (AUC) for first, second, and third years was respectively, 0.722, 0.711, and 0.686. In addition, the risk score had strong correlation with TIME features and genes linked to immune checkpoint blockade (ICB). TIDE scores were dramatically different between two risk groups (p < 0.05), and IPS scores were markedly different between two clusters (p < 0.05). Conclusion: Our research constructed a novel m7G-related lncRNAs that could be used to predict patient outcomes and the effectiveness of immunotherapy in BLCA. Immunotherapy may be more effective for the low-risk group and cluster 2.
RESUMEN
Glandless (Gl) cottonseed is a unique cotton variety with only a trace content of toxic gossypol present. This new cottonseed raises the potential of its enhanced utilization as an agro-food for human consumption. In this work, Gl cottonseed kernels were used with additional cottonseed oil to produce novel peanut butter-like products. Kernels roasted at two temperatures (140 or 150 °C) for a given time (15 or 30 min) were first ground with different ratios of cottonseed oil and two other ingredients (i.e., salt and sugar) with a food blender, and then passed through a meat grinder with a 4-mm-hole grinding plate. Per the preliminary result, the butter-like products with Gl kernels roasted at 150 °C were subject to further structural and textural evaluation. The color of the two butter-like products was comparable to a commercial peanut butter, but the formers' textural properties were significantly different (p ≤ 0.05) from the latter. Morphologic examination by Scanning Electron Microscopy (SEM) and cryo-SEM revealed that the butter product with a longer (30 min) roasting time possessed a smoother surface than the products with a shorter (15 min) roasting time. Oil stability test showed no substantial oil separation (<3%) from the butter products over 7 weeks at ambient temperature (22 °C). This work provides the basic information and parameters for lab cottonseed butter making so that optimization and characterization of cottonseed butter formation can be designed and performed in future research.
RESUMEN
OBJECTIVE: To systematically evaluate the effect of testosterone replacement therapy (TRT) on metabolic indexes in patients with hypogonadism. METHODS: We searched the databases of CNKI, CBM, Wanfang Data, VIP, PubMed, Medline, Embase and Cochrane Library from the establishment to May 2021 for clinical randomized controlled trials (RCT) on the improvement of metabolic indexes of the patients with hypogonadism treated by TRT. According to the inclusion and excretion criteria, we screened the literature, extracted the data and evaluated the quality of the included RCTs, followed by statistical analysis with the STATA15.1 software. RESULTS: Totally 19 RCTs with 1 553 cases were included. Compared with placebo, TRT effectively reduced the levels of fasting plasma glucose (FPG) and fasting insulin (FINS), improved Homeostatic Model Assessment-insulin resistance (HOMA-IR), decreased total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C) and low-density lipoprotein cholesterol (LDL-C), increased the body mass index (BMI), lowered the waist circumference (WC), but elevated the systolic blood pressure (SBP) and diastolic blood pressure (DBP) of the patients. No statistically significant differences were observed in the improvement of glycosylated hemoglobin (HbA1c) and triglyceride (TG) between the TRT-treated patients and placebo controls. The results of Egger's and Begg's tests showed no significant publication bias among the studies. CONCLUSION: TRT can significantly improve metabolic indexes in patients with hypogonadism, though further studies are needed to confirm its long-term efficacy and safety in patients with metabolic disorders.
Asunto(s)
Hipogonadismo , Resistencia a la Insulina , Humanos , Testosterona/uso terapéutico , Hipogonadismo/tratamiento farmacológico , Índice de Masa Corporal , LDL-Colesterol/uso terapéutico , Glucemia/metabolismoRESUMEN
In many porous catalyst supports, the accessibility of interior catalytic sites to reactant species could be restricted due to limitations of reactant transport through pores comparable to reactant dimensions. The interplay between reaction and diffusion in porous catalysts is defined through the Thiele modulus and the effectiveness factor, with diffusional restrictions leading to high Thiele moduli, reduced effectivess factors, and a reduction in the observed reaction rate. We demonstrate a method to integrate ceramic nanostraws into the interior of ordered mesoporous silica MCM-41 to mitigate diffusional restrictions. The nanostraws are the natural aluminosilicate tubular clay minerals known as halloysite. Such halloysite nanotubes (HNTs) have a lumen diameter of 15-30 nm, which is significantly larger than the 2-4 nm pores of MCM-41, thus facilitating entry and egress of larger molecules to the interior of the pellet. The method of integrating HNT nanostraws into MCM-41 is through a ship-in-a-bottle approach of synthesizing MCM-41 in the confined volume of an aerosol droplet that contains HNT nanotubes. The concept is applied to a system in which microcrystallites of Ni@ZSM-5 are incorporated into MCM-41. Using the liquid phase reduction of nitrophenol as a model reaction catalyzed by Ni@ZSM-5, we show that the insertion of HNT nanostraws into this composite leads to a 50% increase in the effectiveness factor. The process of integrating nanostraws into MCM-41 through the aerosol-assisted approach is a one-step facile method that complements traditional catalyst preparation techniques. The facile and scalable synthesis technique toward the mitigation of diffusional restrictions has implications to catalysis and separation technologies.
RESUMEN
Rationale: Pulmonary vascular endotheliitis, perivascular inflammation, and immune activation are observed in COVID-19 patients. While the initial SARS-CoV-2 infection mainly infects lung epithelial cells, whether it also infects endothelial cells (ECs) and to what extent SARS-CoV-2-mediated pulmonary vascular endotheliitis is associated with immune activation remain to be determined. Methods: To address these questions, we studied SARS-CoV-2-infected K18-hACE2 (K18) mice, a severe COVID-19 mouse model, as well as lung samples from SARS-CoV-2-infected nonhuman primates (NHP) and patient deceased from COVID-19. We used immunostaining, RNAscope, and electron microscopy to analyze the organs collected from animals and patient. We conducted bulk and single cell (sc) RNA-seq analyses, and cytokine profiling of lungs or serum of the severe COVID-19 mice. Results: We show that SARS-CoV-2-infected K18 mice develop severe COVID-19, including progressive body weight loss and fatality at 7 days, severe lung interstitial inflammation, edema, hemorrhage, perivascular inflammation, systemic lymphocytopenia, and eosinopenia. Body weight loss in K18 mice correlated with the severity of pneumonia, but not with brain infection. We also observed endothelial activation and dysfunction in pulmonary vessels evidenced by the up-regulation of VCAM1 and ICAM1 and the downregulation of VE-cadherin. We detected SARS-CoV-2 in capillary ECs, activation and adhesion of platelets and immune cells to the vascular wall of the alveolar septa, and increased complement deposition in the lungs, in both COVID-19-murine and NHP models. We also revealed that pathways of coagulation, complement, K-ras signaling, and genes of ICAM1 and VCAM1 related to EC dysfunction and injury were upregulated, and were associated with massive immune activation in the lung and circulation. Conclusion: Together, our results indicate that SARS-CoV-2 causes endotheliitis via both infection and infection-mediated immune activation, which may contribute to the pathogenesis of severe COVID-19 disease.
Asunto(s)
COVID-19/inmunología , COVID-19/patología , Animales , COVID-19/metabolismo , Modelos Animales de Enfermedad , Células Endoteliales/inmunología , Células Endoteliales/virología , Células Epiteliales/inmunología , Células Epiteliales/virología , Pulmón/patología , Ratones , Ratones Endogámicos , Ratones Transgénicos , SARS-CoV-2/aislamiento & purificaciónRESUMEN
Cotton is one of the most important and widely grown crops in the world. Understanding the synthesis mechanism of cotton fiber elongation can provide valuable tools to the cotton industry for improving cotton fiber yield and quality at the molecular level. In this work, the surface and thermal characteristics of cotton fiber samples collected from a wild type (WT) and three mutant lines (Li1, Li2-short, Li2-long, Li2-mix, and liy) were comparatively investigated. Microimaging revealed a general similarity trend of WT ≥ Li2-long ≈ Li2-mix > Li1 > Li2 short ≈ liy with Ca detected on the surface of the last two. Attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and thermogravimetric measurements also showed that Li2-short and liy were more similar to each other, and Li2-long and Li2-mix closer to WT while Li1 was quite independent. FT-IR results further demonstrated that wax and amorphous cellulose were co-present in fiber structures during the fiber formation processes. The correlation analysis found that the FT-IR-based maturity parameter was well correlated (p ≤ 0.05) to the onset decomposition temperature and all three weight-loss parameters at onset, peak, and end decomposition stages, suggesting that the maturity degree is a better parameter than crystallinity index (CI) and other FT-IR parameters that reflect the thermal stability of the cotton fiber. In summary, this work demonstrated that genetic mutation altered the surface and thermal characteristics in the same way for Li2-short and liy, but with different mechanisms for the other three mutant cotton fiber samples.
RESUMEN
The hydrophobic effect of alkyl group insertion into phospholipid bilayers is exploited in modifying and modulating vesicle structure. We show that amphiphilic polypeptoids (peptide mimics) with n-decyl side chains, which we term as hydrophobe-containing polypeptoids (HCPs), can insert the alkyl hydrophobes into the membrane bilayer of phospholipid-based vesicles. Such insertion leads to disruption of the liposomes and the formation of HCP-lipid complexes that are colloidally stable in aqueous solution. Interestingly, when these complexes are added to fresh liposomes, remnant uncomplexed hydrophobes (the n-decyl groups) bridge liposomes and fuse them. The fusion leads to the engulfing of liposomes and the formation of multilayered vesicles. The morphology of the liposome system can be changed from stopping fusion and forming clustered vesicles to the continued formation of multilayered liposomes simply by controlling the amount of the HCP-lipid complex added. The entire procedure occurs in aqueous systems without the addition of any other solvents. There are several implications to these observations including the biological relevance of mimicking fusogenic proteins such as the SNARE proteins and the development of new drug delivery technologies to impact delivery to cell organelles.
Asunto(s)
Membrana Dobles de Lípidos , Liposomas , Interacciones Hidrofóbicas e Hidrofílicas , Fusión de Membrana , Fosfolípidos , SolventesRESUMEN
The use of chemical dispersants is a well-established approach to oil spill remediation where surfactants in an appropriate solvent are contacted with the oil to reduce the oil-water interfacial tension and create small oil droplets capable of being sustained in the water column. Dispersant formulations typically include organic solvents, and to minimize environmental impacts of dispersant use and avoid surfactant wastage it is beneficial to use water-based systems and target the oil-water interface. The approach here involves the tubular clay minerals known as halloysite nanotubes (HNTs) that serve as nanosized reservoir for surfactants. Such particles generate Pickering emulsions with oil, and the release of surfactant reduces the interfacial tension to extremely low values allowing small droplets to be formed that are colloidally stable in the water column. We report new findings on engineering the surfactant-loaded halloysite nanotubes to be stimuli responsive such that the release of surfactant is triggered by contact with oil. This is achieved by forming a thin coating of wax to stopper the nanotubes to prevent the premature release of surfactant. Surfactant release only occurs when the wax dissolves upon contact with oil. The system thus represents an environmentally benign approach where the wax coated HNTs are dispersed in an aqueous solvent and delivered to an oil spill whereupon they release surfactant to the oil-water interface upon contact with oil.
RESUMEN
We explore the use of poly(N-isopropylacrylamide) (PNIPAm)-grafted carbon microspheres (CM) dispersed in water as a stimulus-responsive lubricant. A critical concentration between 3 and 5 mg/mL of PNIPAm-grafted CM is needed to achieve low friction (coefficient of friction â¼ 0.04) at room temperature between borosilicate and silicon surfaces. An increase in the temperature of the system above the lower critical solution temperature (LCST) causes the aggregation of PNIPAm-grafted CM which leads to an increase in friction forces. The process is not immediately reversible unless the lubricant is sonicated so as to redisperse the aggregates. This work provides insight into the rolling friction mechanism and demonstrates the importance of particle singlets in achieving effective lubrication through a rolling mechanism.
RESUMEN
We report the ability to place a high concentration of liposomes in a confined volume as a multicompartment cluster that mimics biological cells and allows for the modulation of release of encapsulated species. The formation of these coated multicompartmental structures is achieved by first binding liposomes into clusters before encapsulating them within a two-dimensional metal-organic framework composed of tannic acid coordinated with a metal ion. The essential feature is a molecularly thin skin over a ssystem of clustered liposomes in a pouch. The structural features of these pouches are revealed by small-angle scattering and electron microscopy. Through cryogenic electron microscopy, clusters with intact liposomes are observed that appear to be encapsulated within a pouch. Small-angle X-ray scattering shows the emergence of a relatively weak Bragg peak at q = 0.125 Å-1, possibly indicating the attachment of the bilayers of adjacent liposomes. The metal-phenolic network (MPN) forms a nanosized conformal coating around liposome clusters, resulting in the reduced release rate of the encapsulated rhodamine B dye. We further show the possibility of communication between the adjacent nanocompartments in the cluster by demonstrating enhanced energy transfer using fluorescence resonance energy transfer (FRET) experiments where the lipophilic donor dye 3,3'-dioctadecyloxacarbocyanine perchlorate (DiO) incorporated within one liposomal compartment transfers energy upon excitation to the lipophilic acceptor dye 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI) in a neighboring liposomal compartment due to their close proximity within the multicompartmental cluster. These observations have significance in adapting these multicompartmental structures that mimic biological cells for cascade reactions and as new depot drug delivery systems.
RESUMEN
Nanoscale capsule-type particles with stimuli-respondent transport of chemical species into and out of the capsule are of significant technological interest. We describe the facile synthesis, properties, and applications of a temperature-responsive silica-poly( N-isopropylacrylamide) (PNIPAM) composite consisting of hollow silica particles with ordered mesoporous shells and a complete PNIPAM coating layer. These composites start with highly monodisperse, hollow mesoporous silica particles fabricated with precision using a template-driven approach. The particles possess a high specific surface area (1771 m2/g) and large interior voids that are accessible to the exterior environment through pore channels of the silica shell. An exterior PNIPAM coating provides thermoresponsiveness to the composite, acting as a gate to regulate the uptake and release of functional molecules. Uptake and release of a model compound (rhodamine B) occurs at temperatures below the lower critical solution temperature (LCST) of 32 °C, while the dehydrated hydrophobic polymer layer collapses over the particle at temperatures above the LCST, leading to a shutoff of uptake and release. These transitions are also manifest at an oil-water interface, where the polymer-coated hollow particles stabilize oil-in-water emulsions at temperatures below the LCST and destabilize the emulsions at temperatures above the LCST. Cryogenic scanning electron microscopy indicates patchlike particle structures at the oil-water interface of the stabilized emulsions. The silica-PNIPAM composite therefore couples advantages from both the hollow mesoporous silica structure and the thermoresponsive polymer.
RESUMEN
We report the ability of hydrophobically modified polypeptoids (HMPs), which are amphiphilic pseudopeptidic macromolecules, to connect across lipid bilayers and thus form layered structures on liposomes. The HMPs are obtained by attaching hydrophobic decyl groups at random points along the polypeptoid backbone. Although native polypeptoids (with no hydrophobes) have no effect on liposomal structure, the HMPs remodel the unilamellar liposomes into structures with comparable diameters but with multiple concentric bilayers. The transition from single-bilayer to multiple-bilayer structures is revealed by small-angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM). The spacing between bilayers is found to be relatively uniform at â¼6.7 nm. We suggest that the amphiphilic nature of the HMPs explains the formation of multibilayered liposomes; i.e., the HMPs insert their hydrophobic tails into adjacent bilayers and thereby serve as the connective glue between bilayers. At higher HMP concentrations, the liposomes are entirely disrupted into much smaller micellelike structures through extensive hydrophobe insertion. Interestingly, these small structures can reattach to fresh unilamellar liposomes and self-assemble to form new two-bilayer liposomes. The two-bilayer liposomes in our study are reminiscent of two-bilayer organelles such as the nucleus in eukaryotic cells. The observations have significance in designing new nanoscale drug delivery carriers with multiple drugs on separate lipid bilayers and extending liposome circulation times with entirely biocompatible materials.
Asunto(s)
Membrana Dobles de Lípidos/química , Liposomas/química , Fosfatidilcolinas/química , Liposomas Unilamelares/química , Microscopía por Crioelectrón , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Electrónica de TransmisiónRESUMEN
High-intensity focused ultrasound (HIFU) can locally ablate biological tissues such as tumors, i.e., induce their rapid heating and coagulative necrosis without causing damage to surrounding healthy structures. It is widely used in clinical practice for minimally invasive treatment of prostate cancer. Nonablative, low-power HIFU was established as a promising tool for triggering the release of chemotherapeutic drugs from temperature-sensitive liposomes (TSLs). In this study, we combine ablative HIFU and thermally triggered chemotherapy to address the lack of safe and effective treatment options for elderly patients with high-risk localized prostate cancer. DU145 prostate cancer cells were exposed to chemotherapy (free and liposomal Sorafenib) and ablative HIFU, alone or in combination. Prior to cell viability assessment by trypan blue exclusion and flow cytometry, the uptake of TSLs by DU145 cells was verified by confocal microscopy and cryogenic scanning electron microscopy (cryo-SEM). The combination of TSLs encapsulating 10 µM Sorafenib and 8.7W HIFU resulted in a viability of less than 10% at 72 h post-treatment, which was significant less than the viability of the cells treated with free Sorafenib (76%), Sorafenib-loaded TSLs (63%), or HIFU alone (44%). This synergy was not observed on cells treated with Sorafenib-loaded nontemperature sensitive liposomes and HIFU. According to cryo-SEM analysis, cells exposed to ablative HIFU exhibited significant mechanical disruption. Water bath immersion experiments also showed an important role of mechanical effects in the synergistic enhancement of TSL-mediated chemotherapy by ablative HIFU. This combination therapy can be an effective strategy for treatment of geriatric prostate cancer patients.
Asunto(s)
Ultrasonido Enfocado de Alta Intensidad de Ablación/métodos , Niacinamida/análogos & derivados , Compuestos de Fenilurea/farmacología , Neoplasias de la Próstata/terapia , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Terapia Combinada , Microscopía por Crioelectrón , Sistemas de Liberación de Medicamentos/métodos , Humanos , Liposomas/química , Masculino , Microscopía Confocal , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Niacinamida/química , Niacinamida/farmacología , Compuestos de Fenilurea/química , SorafenibRESUMEN
Progenitors derived from the stromal vascular fraction (SVF) of white adipose tissue (WAT) possess the ability to form clonal populations and differentiate along multiple lineage pathways. However, the literature continues to vacillate between defining adipocyte progenitors as "stromal" or "stem" cells. Recent studies have demonstrated that a nonpericytic subpopulation of adipose stromal cells, which possess the phenotype, CD45(-) /CD31(-) /CD146(-) /CD34(+) , are mesenchymal, and suggest this may be an endogenous progenitor subpopulation within adipose tissue. We hypothesized that an adipose progenitor could be sorted based on the expression of CD146, CD34, and/or CD29 and when implanted in vivo these cells can persist, proliferate, and regenerate a functional fat pad over serial transplants. SVF cells and culture expanded adipose stromal/stem cells (ASC) ubiquitously expressing the green fluorescent protein transgene (GFP-Tg) were fractionated by flow cytometry. Both freshly isolated SVF and culture expanded ASC were seeded in three-dimensional silk scaffolds, implanted subcutaneously in wild-type hosts, and serially transplanted. Six-week WAT constructs were removed and evaluated for the presence of GFP-Tg adipocytes and stem cells. Flow cytometry, quantitative polymerase chain reaction, and confocal microscopy demonstrated GFP-Tg cell persistence, proliferation, and expansion, respectively. Glycerol secretion and glucose uptake assays revealed GFP-Tg adipose was metabolically functional. Constructs seeded with GFP-Tg SVF cells or GFP-Tg ASC exhibited higher SVF yields from digested tissue, and higher construct weights, compared to nonseeded controls. Constructs derived from CD146(-) CD34(+) -enriched GFP-Tg ASC populations exhibited higher hemoglobin saturation, and higher frequency of GFP-Tg cells than unsorted or CD29(+) GFP-Tg ASC counterparts. These data demonstrated successful serial transplantation of nonpericytic adipose-derived progenitors that can reconstitute adipose tissue as a solid organ. These findings have the potential to provide new insights regarding the stem cell identity of adipose progenitor cells.
Asunto(s)
Adipocitos/trasplante , Tejido Adiposo Blanco/crecimiento & desarrollo , Diferenciación Celular/genética , Trasplante de Células Madre Mesenquimatosas , Células del Estroma/trasplante , Adipocitos/citología , Tejido Adiposo Blanco/citología , Animales , Linaje de la Célula/genética , Separación Celular , Citometría de Flujo , Humanos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Ratones , Medicina Regenerativa , Seda/química , Seda/uso terapéutico , Células del Estroma/citología , Andamios del Tejido/químicaRESUMEN
The wetting behavior of a surface depends on both its surface chemistry and the characteristics of surface morphology and topography. Adding structure to a flat hydrophobic or oleophobic surface increases the effective contact angle and thus the hydrophobicity or oleophobicity of the surface, as exemplified by the lotus leaf analogy. We describe a simple strategy to introduce micropatterned roughness on surfaces of soft materials, utilizing the template of hexagonally packed pores of breath figures as molds. The generated inverse replicas represent micron scale patterned beadlike protrusions on hydrogel surfaces. This added roughness imparts superoleophobic properties (contact angle of the order of 150° and greater) to an inherently oleophobic flat hydrogel surface, when submerged. The introduced pattern on the hydrogel surface changes morphology as it swells in water to resemble morphologies remarkably analogous to the compound eye. Analysis of the wetting behavior using the Cassie-Baxter approximation leads to estimation of the contact angle in the superoleophobic regime and in agreement with the experimental value.
RESUMEN
Magnetically responsive oil-in-water emulsions are effectively stabilized by a halloysite nanotube supported superparamagnetic iron oxide nanoparticle system. The attachment of the magnetically functionalized halloysite nanotubes at the oil-water interface imparts magnetic responsiveness to the emulsion and provides a steric barrier to droplet coalescence leading to emulsions that are stabilized for extended periods. Interfacial structure characterization by cryogenic scanning electron microscopy reveals that the nanotubes attach at the oil-water interface in a side on-orientation. The tubular structure of the nanotubes is exploited for the encapsulation and release of surfactant species that are typical of oil spill dispersants such as dioctyl sulfosuccinate sodium salt and polyoxyethylene (20) sorbitan monooleate. The magnetically responsive halloysite nanotubes anchor to the oil-water interface stabilizing the interface and releasing the surfactants resulting in reduction in the oil-water interfacial tension. The synergistic adsorption of the nanotubes and the released surfactants at the oil-water interface results in oil emulsification into very small droplets (less than 20µm). The synergy of the unique nanotubular morphology and interfacial activity of halloysite with the magnetic properties of iron oxide nanoparticles has potential applications in oil spill dispersion, magnetic mobilization and detection using magnetic fields.