RESUMEN
Synthesizing single-walled carbon nanotubes (SWCNTs) with a narrow chirality distribution is essential for obtaining pure chirality materials through postgrowth sorting techniques. Using carbon monoxide chemical vapor deposition, we devise a ruthenium (Ru) catalyst supported by silica for the bulk production of SWCNTs containing only a few (n, m) species. The result is attributed to the limited carbon dissociation on the supported Ru clusters, favoring the growth of only small-diameter SWCNTs at comparable growth rates. The resulting materials expedite high-purity single chirality separation using gel chromatography, leading to unprecedented yields of 3.5% for (9, 1) and 5.2% for (9, 2) nanotubes, which surpass those separated from HiPco SWCNTs by two orders of magnitude. This work sheds light on the large-quantity synthesis of SWCNTs with enriched species beyond near-armchair ones for their high-yield separation.
RESUMEN
The asymmetrical growth of a single-wall carbon nanotube (SWCNT) by introducing a change of a local atomic structure, is usually inevitable and supposed to have a profound effect on the chirality control and property tailor. However, the breaking of the symmetry during SWCNT growth remains unexplored and its origins at the atomic-scale are elusive. Here, environmental transmission electron microscopy is used to capture the process of breaking the symmetry of a growing SWCNT from a sub-2-nm platinum catalyst nanoparticle in real-time, demonstrating that topological defects formed on the side of a SWCNT can serve as a buffer for stress release and inherently break its axis-symmetrical growth. Atomic-level details reveal the importance of the tube-catalyst interface and how the atom rearrangement of the solid-state platinum catalyst around the interface influences the final tubular structure. The active sites responsible for trapping carbon dimers and providing enough driving force for carbon incorporation and asymmetric growth are shown to be low-coordination step edges, as confirmed by theoretical simulations.
RESUMEN
Conventional photothermal therapy (PTT) usually relies on a macroscopic heat source to raise the temperature of tissues to 41-45 °C, which not only kills the pathological cells but causes severe side effects on nearby normal tissues, thus reducing the accuracy of PTT. Here we successfully fabricated nanocomposites of NaYF4:Yb3+,Tm3+@NaYF4:Yb3+@SiO2-SWCNTs, in which the upconversion nanoparticles (UCNPs) serve as real-time temperature-feedback moiety and the single-walled carbon nanotubes (SWCNTs) serve as efficient nano-heaters. The sample displays an excellent photothermal conversion capacity, i.e., the temperature of the aqueous dispersion increases from 23.3 °C up to 60.1 °C under 980 nm excitation due to the intense absorption and highly efficient heat generation of SWCNTs. Meanwhile, the temperature of the nanocomposites is monitored in real time based on the fluorescent intensity ratio of UCNPs. The in-vitro experiments demonstrate that the temperature of the nanocomposites at tissue injection of 1 mm can reach PTT temperature of 42.2 °C with a facile surrounding temperature of 36.2 °C under moderate laser power (980 nm, 2.0 W cm-2). These results provide a novel design for multifunctional nanocomposites that enable safe and controlled PTT.
RESUMEN
A highly active catalyst for the oxygen evolution reaction (OER) is critical to achieve high efficiency in hydrogen generation from water splitting. Direct conversion of nickel foam (NF) into nickel-based catalysts has attracted intensive interest due to the tight interaction of the catalysts to the substrate surface. However, the catalytic performances are still far below expectation because of the problems of low catalyst amount, thin catalyst layer, and small active area caused by the limitations of the synthesis method. Herein, we develop a Fe3+ -induced synthesis strategy to transform the NF surface into a thicker catalyst layer. In addition to the excellent conductivity and high stability, the as-prepared FeMo-Ni2 P2 O7 /NF catalysts expose more active sites and facilitate mass transfer due to their thicker catalyst layer and highly dense coral-like micro-nano structure. Furthermore, the Mo, Fe co-modulation optimizes the adsorption free energies of the OER intermediates, boosting catalytic activities. Its catalytic activity is among the highest, and it exhibits a small Tafel slope of 34.71â mV dec-1 and a low overpotential of 161â mV for delivering a current density of 100â mA cm-2 compared to reported Ni-based catalysts. The present strategy can be further used in the design of other catalysts for energy storage and conversion.
RESUMEN
Non-magnetic metal nanoparticles have been previously applied for the growth of single-walled carbon nanotubes (SWNTs). However, the activation mechanisms of non-magnetic metal catalysts and chirality distribution of synthesized SWNTs remain unclear. In this work, the activation mechanisms of non-magnetic metal palladium (Pd) particles supported by the magnesia carrier and thermodynamic stabilities of nucleated SWNTs with different (n, m) are evaluated by theoretical simulations. The electronic metal-support interaction between Pd and magnesia upshifts the d-band center of Pd, which promotes the chemisorption and dissociation of carbon precursor molecules on the Pd surface, making the activation of magnesia-supported non-magnetic Pd catalysts for SWNT growth possible. To verify the theoretical results, a porous magnesia supported Pd catalyst is developed for the bulk synthesis of SWNTs by chemical vapor deposition. The chirality distribution of Pd-grown SWNTs is understood by operating both Pd-SWNT interfacial formation energy and SWNT growth kinetics. This work not only helps to gain new insights into the activation of catalysts for growing SWNTs, but also extends the use of non-magnetic metal catalysts for bulk synthesis of SWNTs.
RESUMEN
Fixing nitrogen (N2 ) by electrosynthesis method has become a promising way to ammonia (NH3 ) production, nevertheless, developing electrocatalysts combining long-term stable and low-cost feathers are still a great challenge to date. Using comprehensive first-principles calculations, we herein investigate the potential of a new class of two-dimensional (2D) transition metal tri-borides (TMB3 s) as nitrogen reduction reaction (NRR) electrocatalysts, and explore the effect of magnetic orders on the NRR. Our results show that the TMB3 s can sufficiently activate N2 and convert it to NH3 . Particularly, TiB3 is identified as a high-efficiency catalyst for NRR because of its low limiting potential (-0.24â V) and good suppression of the competitive hydrogen evolution reaction (HER). For the first time, we present that these TMB3 s with various magnetic states exhibit different performances in the adsorption of N2 and NRR intermediates, and minor effect on activation of N2 . Besides, VB3 , CrB3 , MnB3 , and FeB3 monolayers possess the superior capacity to suppress surface oxidation via the self-activating process, which reduces * O/* OH into * H2 O under NRR electrochemical conditions, thus favoring the N2 electroreduction. This work paves the way for finding high-performance NRR catalysts for transition metal borides and pioneering the research of magnetic states effects in NRR.
RESUMEN
Homogenously dispersing single-walled carbon nanotubes (SWNTs) in solvents has been one critical step towards exploiting their exceptional properties in high-performance components. However, the solubility of SWNTs is severely limited by the inert tube surfaces and strong tube-tube van der Waals attractions. Starting with carbon nanotubides, i.e., negatively charged SWNTs reduced by alkali metals, we herein propose a sonication-free approach to prepare an aqueous dispersion of SWNTs. The approach combines the spontaneous dissolution of nanotubides in polar aprotic solvents with polyvinylpyrrolidone wrapping and dialysis in deionized H2O, which results in well-dispersed, neutralized SWNTs. The gelation of concentrated SWNT dispersion leads to the formation of hydrogels, which is subsequently transformed into SWNT aerogels through lyophilization. The prepared SWNT aerogels exhibit high-mass-sorption capacities for organic solvent absorption, paving the way towards harvesting the extraordinary properties of SWNTs.
RESUMEN
The geometrical structure, electronic and magnetic properties of B-endoped C60 (B@C60) ligand sandwich clusters, TM&(B@C60)2 (TM = V, Cr), and their one-dimensional (1D) infinite molecular wires, [TM&(B@C60)]∞, have been systematically studied using first-principles calculations. The calculations showed that the TM atoms can bond strongly to the pentagonal (η5-coordinated) or hexagonal rings (η6-coordinated) of the endoped C60 ligands, with binding energies ranging from 1.90 to 3.81 eV. Compared to the configurations with contrast-bonding characters, the η6- and η5-coordinated bonding is energetically more favorable for V-(B@C60) and Cr-(B@C60) complexes, respectively. Interestingly, 1D infinite molecular wire [V&(B@C60)-η6]∞ is an antiferromagnetic half-metal, and 1D [Cr&(B@C60)-η5]∞ molecular wire is a ferromagnetic metal. The tunable electronic and magnetic properties of 1D [TM&(B@C60)]∞ SMWs are found under compressive and tensile stains. These findings provide additional possibilities for the application of C60-based sandwich compounds in electronic and spintronic devices.
RESUMEN
An Ir/CeO2 composite catalyst with Ir nanorods (NRs) on amorphous CeO2 was synthesized through a facile one-pot hydrothermal method, which shows excellent activity towards hydrogen evolution and oxygen evolution in alkaline media, even superior to the performance of commercial Pt/C, IrO2 and RuO2 catalysts. The enhanced performance could be attributed to the interfacial electron synergistic effect between Ir and CeO2.
RESUMEN
A partially amorphous palladium sulfide was synthesized by sulfurizing crystalline palladium nanosheets facilely, which shows excellent activity and stability towards hydrogen evolution in alkaline media, even superior to the performance of the commercial Pt/C catalyst. The enhanced performance could be attributed to the amorphization transformation and the nanosheet morphology.
RESUMEN
Single-walled carbon nanotubes (SWNTs) emerge as a promising material to advance carbon nanoelectronics. However, synthesizing or assembling pure metallic/semiconducting SWNTs required for interconnects/integrated circuits, respectively, by a conventional chemical vapor deposition method or by an assembly technique remains challenging. Recent studies have shown significant scientific breakthroughs in controlled SWNT synthesis/assembly and applications in scaled field effect transistors, which are a critical component in functional nanodevices, thereby rendering the horizontal SWNT array an important candidate for innovating nanotechnology. This review provides a comprehensive analysis of the controlled synthesis, surface assembly, characterization techniques, and potential applications of horizontally aligned SWNT arrays. This review begins with the discussion of synthesis of horizontally aligned SWNTs with regulated direction, density, structure, and theoretical models applied to understand the growth results. Several traditional procedures applied for assembling SWNTs on target surface are also briefly discussed. It then discusses the techniques adopted to characterize SWNTs, ranging from electron/probe microscopy to various optical spectroscopy methods. Prototype applications based on the horizontally aligned SWNTs, such as interconnects, field effect transistors, integrated circuits, and even computers, are subsequently described. Finally, this review concludes with challenges and a brief outlook of the future development in this research field.
RESUMEN
Recently, electronic skin and smart textiles have attracted considerable attention. Flexible sensors, as a kind of indispensable components of flexible electronics, have been extensively studied. However, wearable airflow sensors capable of monitoring the environment airflow in real time are rarely reported. Herein, by mimicking the spider's fluff, an ultrasensitive and flexible all-textile airflow sensor based on fabric with in situ grown carbon nanotubes (CNTs) is developed. The fabric decorated with fluffy-like CNTs possesses exceptionally large contact area, endowing the airflow sensor with superior properties including ultralow detection limit (≈0.05 m s-1 ), multiangle airflow differential response (0°-90°), and fast response time (≈1.3 s). Besides, the fluffy fabric airflow sensor can be combined with a pristine fabric airflow sensor to realize highly sensitive detection in a wide airflow range (0.05-7.0 m s-1 ). Its potential applications including transmitting information according to Morse code by blowing the sensors, monitoring increasing and decreasing airflow velocity, and alerting blind people walking outside about potential hazard induced by nearby fast-moving objects are demonstrated. Furthermore, the airflow sensor can be directly integrated into clothing as stylish designs without sacrificing comfortness. It is believed that the ultrasensitive all-textile airflow sensor holds great promise for applications in smart textiles and wearable electronics.
Asunto(s)
Aire , Materiales Biomiméticos , Nanotubos de Carbono , Textiles , Dispositivos Electrónicos Vestibles , Aire/análisis , Materiales Biomiméticos/química , Biomimética , Humanos , Movimiento (Física) , Nanotubos de Carbono/química , Textiles/análisisRESUMEN
The growth kinetics play key roles in determining the chirality distribution of the grown single-walled carbon nanotubes (SWCNTs). However, the lack of comprehensive understandings on the SWCNT's growth mechanism at the atomic scale greatly hinders SWCNT chirality-selective synthesis. Here, we establish a general model, where the dislocation theory is a specific case, to describe the etching agent-dependent growth kinetics of SWCNTs on solid catalyst particles. In particular, the growth kinetics of SWCNTs in the absence of etching agent is validated by both in situ environmental transmission electron microscopy and ex situ chemical vapor deposition growth of SWCNTs. On the basis of the new theory of SWCNT's growth kinetics, we successfully explained the selective growth of (2n, n) SWCNTs. This study provides another degree of freedom for SWCNT controlled synthesis and opens a new strategy to achieve chirality-selective synthesis of (2n, n) SWCNTs using solid catalysts.
RESUMEN
Tremella-like MoS2 nano-sheets were directly synthesized on transition metal sulfides (TMS) via a solvothermal method, displaying extreme activities towards hydrogen and oxygen evolution in alkaline condition. The enhanced performance is attributed to the synergistic effect between the MoS2 shell and TMS yolk, expanded interlayer distance and the hierarchical structure.
RESUMEN
Fuel cells are expected to be one of the most promising alternatives to the increasingly scarce fossil fuels, and Pt is the most commonly used catalyst for anodic and cathodic electrochemical reactions. To realize large-scale commercialization, it is most urgent to improve the efficiency of Pt and reduce the cost. Here, we synthesized an octahedral Pt-Ni-Ir yolk-shell catalyst through stepwise co-deposition (SCD), surface-limited Pt deposition (SLPD) and Ni-coordinating etching (NCE) processes. Experimental studies showed that the catalytic activities of the as-prepared trimetal yolk-shell catalyst were several times higher than that of the commercial Pt/C towards oxygen reduction and methanol oxidization under both acidic and alkaline conditions. This work may be extended to designing other multimetallic functional materials with complex hierarchical nanostructures, which is conducive to greatly enhancing the performance.
RESUMEN
The absence of dangling bonds in close-edged graphene nanoribbons (CEGNRs) confers upon them a series of fascinating properties, especially when compared with cylindrical carbon nanotubes and open-edged GNRs. Here, the configuration of CEGNRs is described, followed by the structure-related properties, including mechanical, thermal, electrical, optical, and magnetic properties. Based on the unique structures and extraordinary properties, their potential applications in a variety of fields, such as field-effect transistors, energy suppliers, nanoactuators, and fibers, are discussed. Remarkably, the strategies applied for generating CEGNRs, mainly from the collapse of carbon nanotubes and graphene tubes, are depicted in detail. Finally, the prospects in the research area of CEGNRs are proposed.
RESUMEN
A major obstacle for the applications of single-walled carbon nanotubes (SWNTs) in electronic devices is their structural diversity, ending in SWNTs with diverse electrical properties. Catalytic chemical vapor deposition has shown great promise in directly synthesizing high-quality SWNTs with a high selectivity to specific chirality (n, m). During the growth process, the tube-catalyst interface plays crucial roles in regulating the SWNT nucleation thermodynamics and growth kinetics, ultimately governing the SWNT chirality distribution. Starting with the introduction of SWNT growth modes, this review seeks to extend the knowledge about chirality-selective synthesis by clarifying the energetically favored SWNT cap nucleation and the threshold step for SWNT growth, which describes how the tube-catalyst interface affects both the nucleus energy and the new carbon atom incorporation. Such understandings are subsequently applied to interpret the (n, m) specific growth achieved on a variety of templates, such as SWNT segments or predefined molecular seeds, transition metal (Fe, Co and Ni)-containing catalysts at low reaction temperatures, W-based alloy catalysts, and metal carbides at relatively high reaction temperatures. The up to date achievements on chirality-controlled synthesis of SWNTs is summarized and the remaining major challenges existing in the SWNT synthesis field are discussed.
RESUMEN
Controlling the electronic and magnetic properties of G/TMD (graphene on transition metal dichalcogenide) heterostructures is essential to develop electronic devices. Despite extensive studies in perfecting G/TMDs, most products have various defects due to the limitations of the fabrication techniques, and research investigating the performances of defective G/TMDs is scarce. Here, we conduct a comprehensive study of the effects of 3d transition metal (TM = Sc-Ni) atom-intercalated G/WSe2 heterostructures, as well as their defective configurations having single vacancies on graphene or WSe2 sublayers. Interestingly, Ni-intercalated G/WSe2 exhibits a small band gap of 0.06 eV, a typical characteristic of nonmagnetic semiconductors. With the presence of one single vacancy in graphene, nonmagnetic (or ferromagnetic) semiconductors with sizable band gaps, 0.10-0.51 eV, can be achieved by intercalating Ti, Cr, Fe and Ni atoms into the heterostructures. Moreover, V and Mn doped non-defective and Sc, V, Co doped defective G/WSe2 can lead to sizable half metallic band gaps of 0.1-0.58 eV. Further analysis indicates that the significant electron transfer from TM atoms to graphene accounts for the opening of a large band gap. Our results provide theoretical guidance to future applications of G/TMD based heterostructures in (spin) electronic devices.
RESUMEN
Chemical vapor deposition synthesis of single-walled carbon nanotubes, using an Fe catalyst, and alternating methane and carbon monoxide as carbon feedstocks, leads to the reversible formation of junctions between tubes of different diameters. Combined with an atomistic modeling of the tube/catalyst interface, this shows that the ratio of diameters of the tube and its seeding particle, denoting the growth mode, depends on the carbon fraction inside the catalyst. With carbon monoxide, nanoparticles are strongly carbon enriched, and tend to dewet the tube, in a perpendicular growth mode. Cross-checking our results with the available reports from the literature of the last decade strongly suggests that these latter conditions should favor the near armchair chiral selectivity observed empirically.
RESUMEN
Exploration of highly efficient electrocatalysts is significantly urgent for the extensive adoption of the fuel cells. Because of their high activity and super stability, Pt-Pd bimetal nanocrystals have been widely recognized as one class of promising electrocatalysts for oxygen reduction. This article presents the synthesis of popcorn-shaped Pt-Pd bimetal nanoparticles with a wide composition range through a facile hydrothermal strategy. The hollow-centered nanoparticles are surrounded by several petals and concave surfaces. By exploring the oxygen reduction reaction on the carbon supported Pt-Pd popcorns in perchloric acid solution, it is found that compared with the commercial Pt/C catalyst the present catalysts display superior catalytic performances in aspects of catalytic activity and stability. More importantly, the Pt-Pd popcorns display minor performance degradations through prolonged potential cycling. The enhanced performances can be mainly attributed to the unique popcorn structure of the Pt-Pd components, which allows the appearance and long existence of the high active sites with more accessibility. The present work highlights the key roles of accessible high active sites in the oxygen reduction reaction, which will ultimately guide the design of highly durable Pt-Pd catalysts.