Research progress on the mechanism of acute hypertriglyceridemic pancreatitis.

ABSTRACT: The incidence rate of hypertriglyceridemia pancreatitis (HTGP) has experienced a notable increase in recent years, with eclipsing alcohol as the second leading cause of acute pancreatitis (AP). HTGP is often associated with more severe local and systemic complications. Recognized as a metabolic disorder hypertriglyceridemia (HTG), holds significant relevance in the pathogenesis of HTGP, yet its mechanisms are not fully understood. Both primary (genetic) and secondary (acquired) factors contribute to elevated triglyceride (TG) levels, which concurrently influence the progression of HTGP. This article presents a comprehensive review of the evolving research on HTGP pathogenesis, encompassing lipid synthesis and metabolism, calcium signal transduction, inflammatory mediators, endoplasmic reticulum stress, autophagy, mitochondrial injury by fatty acids, oxidative stress response, genetic factors, and gene mutations. By unraveling the intricate mechanisms underlying HTGP, this article aims to enhance physicians' understanding of the disease and facilitate the development of potential targeted pharmacological interventions for patients.

Evolution of Microstructure and Mechanical Properties of Ti-6Al-4V Alloy under Heat Treatment and Multi-Axial Forging.

The mechanical properties of various Ti-6Al-4V alloys are influenced by their respective microstructures. This study generated an ultrafine-grain (UFG) Ti-6Al-4V alloy featuring bimodal grain distribution characteristics achieved through initial heat treatment, multi-axial forging (MF), and annealing. The study also extensively examined the evolution process of the alloy's microstructure. By subjecting the materials to heat treatments at 900 °C with air cooling and 950 °C with air cooling, both materials were found to be consisted of primary α (αp) and transformed ß (αs+ß) regions with different proportions. Following MF, the sample treated at 900 °C displays a microstructure featuring UFGs of α+ß surrounding larger micron-sized αp grains. On the other hand, the sample treated at 950 °C displays a microstructure distinguished by twisted αs lamellar and fragmented ß grains surrounding larger micron-sized αp grains. Following annealing, no significant grain growth was observed in the sample. The geometrically necessary dislocations (GNDs) within the UFGs were eliminated, though some GNDs persisted within the αp grains. The samples undergoing the 900 °C heat treatment, MF, and subsequent annealing exhibited elevated strength (1280 MPa) and total elongation (10.7%). This investigation introduces a novel method for designing the microstructure of the Ti-6Al-4V alloy to achieve superior performance.

Identification of cotton pest and disease based on CFNet- VoV-GCSP -LSKNet-YOLOv8s: a new era of precision agriculture.

Introduction: The study addresses challenges in detecting cotton leaf pests and diseases under natural conditions. Traditional methods face difficulties in this context, highlighting the need for improved identification techniques. Methods: The proposed method involves a new model named CFNet-VoV-GCSP-LSKNet-YOLOv8s. This model is an enhancement of YOLOv8s and includes several key modifications: (1) CFNet Module. Replaces all C2F modules in the backbone network to improve multi-scale object feature fusion. (2) VoV-GCSP Module. Replaces C2F modules in the YOLOv8s head, balancing model accuracy with reduced computational load. (3) LSKNet Attention Mechanism. Integrated into the small object layers of both the backbone and head to enhance detection of small objects. (4) XIoU Loss Function. Introduced to improve the model's convergence performance. Results: The proposed method achieves high performance metrics: Precision (P), 89.9%. Recall Rate (R), 90.7%. Mean Average Precision (mAP@0.5), 93.7%. The model has a memory footprint of 23.3MB and a detection time of 8.01ms. When compared with other models like YOLO v5s, YOLOX, YOLO v7, Faster R-CNN, YOLOv8n, YOLOv7-tiny, CenterNet, EfficientDet, and YOLOv8s, it shows an average accuracy improvement ranging from 1.2% to 21.8%. Discussion: The study demonstrates that the CFNet-VoV-GCSP-LSKNet-YOLOv8s model can effectively identify cotton pests and diseases in complex environments. This method provides a valuable technical resource for the identification and control of cotton pests and diseases, indicating significant improvements over existing methods.

Body composition and metabolic syndrome in patients with type 1 diabetes.

BACKGROUND: In recent years, the prevalence of obesity and metabolic syndrome in type 1 diabetes (T1DM) patients has gradually increased. Insulin resistance in T1DM deserves attention. It is necessary to clarify the relationship between body composition, metabolic syndrome and insulin resistance in T1DM to guide clinical treatment and intervention. AIM: To assess body composition (BC) in T1DM patients and evaluate the relationship between BC, metabolic syndrome (MS), and insulin resistance in these indi-viduals. METHODS: A total of 101 subjects with T1DM, aged 10 years or older, and with a disease duration of over 1 year were included. Bioelectrical impedance analysis using the Tsinghua-Tongfang BC Analyzer BCA-1B was employed to measure various BC parameters. Clinical and laboratory data were collected, and insulin resistance was calculated using the estimated glucose disposal rate (eGDR). RESULTS: MS was diagnosed in 16/101 patients (15.84%), overweight in 16/101 patients (15.84%), obesity in 4/101 (3.96%), hypertension in 34/101 (33.66%%) and dyslipidemia in 16/101 patients (15.84%). Visceral fat index (VFI) and trunk fat mass were significantly and negatively correlated with eGDR (both P < 0.001). Female patients exhibited higher body fat percentage and visceral fat ratio compared to male patients. Binary logistic regression analysis revealed that significant factors for MS included eGDR [P = 0.017, odds ratio (OR) = 0.109], VFI (P = 0.030, OR = 3.529), and a family history of diabetes (P = 0.004, OR = 0.228). Significant factors for hypertension included eGDR (P < 0.001, OR = 0.488) and skeletal muscle mass (P = 0.003, OR = 1.111). Significant factors for dyslipidemia included trunk fat mass (P = 0.033, OR = 1.202) and eGDR (P = 0.037, OR = 0.708). CONCLUSION: Visceral fat was found to be a superior predictor of MS compared to conventional measures such as body mass index and waist-to-hip ratio in Chinese individuals with T1DM. BC analysis, specifically identifying visceral fat (trunk fat), may play an important role in identifying the increased risk of MS in non-obese patients with T1DM.

RHOJ Induces Epithelial-to-Mesenchymal Transition by IL-6/STAT3 to Promote Invasion and Metastasis in Gastric Cancer.

Background: Recently, the molecular classification of gastric cancer (GC) promotes the advances of GC patients' precision therapy and prognosis prediction. According to the Asian Cancer Research Group (ACRG), GC is classified as microsatellite instable (MSI) subtype GC, microsatellite stable/epithelial-to-mesenchymal transition (MSS/EMT) subtype GC, MSS/TP53- subtype GC, and MSS/TP53+ subtype GC. Due to the easy metastasis of EMT-subtype GC, it has the worst prognosis, the highest recurrence rate, and the tendency to occur at a younger age. Therefore, it is curious and crucial for us to understand the molecular basis of EMT-subtype GC. Methods: The expression of RHOJ was detected by quantitative real-time PCR (qPCR) and immunohistochemistry (IHC) in GC cells and tissues. Western blotting and immunofluorescence (IF) were conducted to examine the effects of RHOJ on the EMT markers' expression of GC cells. The GC cells' migration and invasion were investigated by transwell assay. The tumor growth and metastasis were demonstrated correspondingly in different xenograft models. Results: Firstly, it was noticed that RHOJ was significantly upregulated in EMT-subtype GC and RHOJ has close relationships with the EMT process of GC, based on the Gene Expression Omnibus (GEO) and the Cancer Genome Atlas (TCGA) databases. Next, transwell assay and tail vein metastasis models were conducted to verify that RHOJ mediates the EMT to regulate the invasion and metastasis of GC in vitro and in vivo. In addition, weakened tumor angiogenesis was observed after RHOJ knockdown by the angiogenesis assay of HUVEC. RNA-seq and further study unveiled that RHOJ aggravates the malignant progression of GC by inducing EMT through IL-6/STAT3 to promote invasion and metastasis. Finally, blocking the IL-6/STAT3 signaling overcame RHOJ-mediated GC cells' growth and migration. Conclusions: These results indicate that the upregulation of RHOJ contributes to EMT-subtype GC invasion and metastasis via IL-6/STAT3 signaling, and RHOJ is expected to become a promising biomarker and therapeutic target for EMT-subtype GC patients.

7-Guanidinyl Coumarins: Synthesis, Photophysical Properties, and Application to Exploit the Pd-Catalyzed Release of Guanidines.

Molecular manipulation of guanidino-containing biomolecules in a cellular environment is fundamental to exploiting protein function and drug release, but currently, there is a lack of suitable methods for reaction screening and monitoring. To exploit the potential of the fluorescent method in this respect, herein, we evaluated a novel array of 7-guanidinyl coumarins by incorporating different substituted guanidino moieties into a coumarin scaffold. These compounds were prepared by guanidinylation reagent S-methylisothiourea or TFA-protected pyrazole-carboxamidine. Examination of their photophysical properties revealed that the fluorescence emission of alkyloxycarbonyl-substituted guanidinyl coumarin was significantly enhanced as compared with the unsubstituted analogue. This dramatic fluorescence difference enabled preliminary exploitation of the Pd-catalyzed release of allyloxycarbonyl (Alloc)-caged guanidinyl coumarin-6 in living cells.

Facile access to S-methyl dithiocarbamates with sulfonium or sulfoxonium iodide as a methylation reagent.

Efficient access to S-methyl dithiocarbamates was achieved with sulfonium or sulfoxonium iodide as a methylation reagent. This method is reliable for the synthesis of dithiocarbamates from primary or secondary amines, with sulfoxonium iodide demonstrating more robust methylation capability than sulfonium iodide. Moreover, it also enables facile access to S-trideuteromethyl dithiocarbamates via sulfoxonium metathesis between sulfoxonium iodide and DMSO-d6 with high yields.

The effect of abutment material stiffness on the mechanical behavior of dental implant assemblies: A 3D finite element study.

PURPOSE: This study aimed to evaluate the stress distribution and microgap formation in implant assemblies with conical abutments made of different materials under an oblique load. MATERIALS AND METHODS: The mechanical behavior of an implant assembly with a titanium abutment was analyzed and compared with that of an assembly with a Y-TZP abutment using finite element analysis (FEA). A torque of 20 Ncm was first applied to the abutment screw, followed by oblique loads of 10 N-280 N applied to the prosthesis placed on the implant. The maximum stress in the abutment screw, the microgap formation process, and the critical load for bridging the internal implant space were evaluated. RESULTS: No significant difference in stress distribution between the two cases was observed, with the stresses being mainly concentrated at the top half of the screw (the predicted maximum von Mises stress was approximately 1200 MPa at 280 N). The area in contact at the implant-to-abutment interface decreased with increasing load for both abutments, with the critical load for bridging the internal implant space being roughly 140 N. The maximum gap size being was approximately 470 µm with either abutment. CONCLUSION: There was no significant difference in the stress distribution or microgap formed between implant assemblies with titanium and Y-TZP abutments having an internal conical connection.

PER2 integrates circadian disruption and pituitary tumorigenesis.

Rationale: The role of circadian clock in pituitary tumorigenesis remains elusive. Here we investigate whether and how circadian clock modulates the development of pituitary adenomas. Methods and Results: We found altered expression of pituitary clock genes in patients with pituitary adenomas. In particular, PER2 is prominently upregulated. Further, jetlagged mice with PER2 upregulation have accelerated growth of GH3 xenograft tumor. Conversely, loss of Per2 protects mice against developing estrogen-induced pituitary adenoma. Similar antitumor effect is observed for SR8278, a chemical that can decrease pituitary PER2 expression. RNA-seq analysis suggests involvement of cell cycle disturbance in PER2 regulation of pituitary adenoma. Subsequent in vivo and cell-based experiments validate that PER2 induces pituitary expression of Ccnb2, Cdc20 and Espl1 (three cell cycle genes) to facilitate cell cycle progression and inhibit apoptosis, thereby promoting pituitary tumorigenesis. Mechanistically, PER2 regulates the transcription of Ccnb2, Cdc20 and Espl1 through enhancing the transcriptional activity of HIF-1α. HIF-1α trans-activates Ccnb2, Cdc20 and Espl1 via direct binding to its specific response element in the gene promoters. Conclusion: PER2 integrates circadian disruption and pituitary tumorigenesis. These findings advance our understanding of crosstalk between circadian clock and pituitary adenomas and highlight the relevance of clock-based approaches in disease management.

A population-based characterization study of anti-mitochondrial M2 antibodies and its consistency with anti-mitochondrial antibodies.

OBJECTIVE: This study aims to estimate the prevalence of anti-mitochondrial antibody subtype M2 (AMA-M2) and assess its consistency with AMA in a general population. METHODS: A total of 8954 volunteers were included to screen AMA-M2 using enzyme-linked immunosorbent assay. Sera with AMA-M2 >50 RU/mL were further tested for AMA using an indirect immunofluorescence assay. RESULTS: The population frequency of AMA-M2 positivity was 9.67%, of which 48.04% were males and 51.96% were females. The AMA-M2 positivity in males had a peak and valley value of 7.81% and 16.88% in those aged 40 to 49 and ≥70 years, respectively, whereas it showed a balanced age distribution in females. Transferrin and immunoglobulin M were the risk factors for AMA-M2 positivity and exercise was the only protective factor. Of 155 cases with AMA-M2 >50 RU/mL, 25 cases were AMA-positive, with a female-to-male ratio of 5.25:1. Only 2 people, with very high AMA-M2 of 760 and >800 RU/mL, met the diagnostic criteria of primary biliary cholangitis (PBC), making the prevalence of PBC 223.36 per million in southern China. CONCLUSION: We found that AMA-M2 has a low coincidence rate with AMA in the general population. A new decision-making point for AMA-M2 is needed to improve consistency with AMA and diagnostic accuracy.

Engineering c-Met-CAR NK-92 cells as a promising therapeutic candidate for lung adenocarcinoma.

Mesenchymal-epithelial transition factor (C-Met) has been acknowledged as a significant therapeutic target for treating lung adenocarcinoma (LUAD). However, the potential application of chimeric antigen receptors (CAR)-modified natural killer (NK) cells targeting c-Met in LUAD is rarely explored. In this study, bioinformatic databases were searched and a tissue microarray (TMA) was enrolled to investigate expression status and prognostic role of c-Met in LUAD. Then, four types of c-Met-CAR structures were designed and prepared. The engineering CAR-NK cells containing c-Met-CARs were transfected, verified and characterized. The tumor-inhibitory role of c-Met-CAR-NK cells was finally evaluated in vitro and in vivo. The results demonstrated that c-Met expression elevated and confirmed that high c-Met expression was significantly associated with unfavorable prognosis in LUAD. Then, C-Met-CAR-NK cells were successfully constructed and DAP10 designed in CAR structure was a favorable stimulator for NK cell activation. CCN4 containing DAP10 co-stimulator exhibited the strongest cytotoxicity compared with other CAR-NK cells. Furthermore, CCN4 cells also exerted the prominent tumor-inhibitory effect on xenograft tumor growth. Collectively, this study suggests that DAP10 is a potent stimulator in CAR structure for NK cell activation, and CCN4-based immunotherapy may represent a promising strategy for the treatment of c-Met-positive LUAD.

Circadian oscillator NPAS2 regulates diurnal expression and activity of CYP1A2 in mouse liver.

We aimed to investigate the potential role of NPAS2 in controlling diurnal expression and activity of hepatic CYP1A2 and to determine the underlying mechanisms. Regulatory effects of NPAS2 on CYP1A2 were determined using Npas2 knockout (Npas2-/-) mice as well as AML-12, Hepa1-6 and HepG2 cells. mRNA and protein levels were detected by reverse transcription-quantitative real-time PCR and western blotting, respectively. In vitro and in vivo CYP1A2 activities were respectively evaluated using the probe substrates phenacetin and theophylline. Transcriptional regulation was investigated using luciferase reporter assays and ChIP-Seq analysis. Loss of Npas2 in mice decreased CYP1A2 expression (at both mRNA and protein levels) and blunted its rhythmicity in the liver. Likewise, Npas2 ablation down-regulated the enzymatic activity of CYP1A2 (probed by metabolism of phenacetin and theophylline) and abrogated its time-dependency. Cell-based assays confirmed that NPAS2 positively regulated CYP1A2 expression. Mechanistic study indicated that NPAS2 trans-activated Cyp1a2 through its specific binding to the -416 bp E-box-like element within the gene promoter. In conclusion, NPAS2 was identified as a key transcriptional regulator of diurnal expression of hepatic CYP1A2 in mice. Our findings have implications for improved understanding of circadian metabolism and chronopharmacokinetics.

Boron-Assisted Selective Citrulline Modification under Mild Conditions.

Protein citrullination is one type of protein post-translational modification. Previous methods entail the use of a strongly acidic condition (pH <1), which impedes its exploration under physiological and pathological conditions. Here, we developed a biocompatible method based on o-boron-assisted citrulline modification. We demonstrated that this method enables selective and mainly irreversible modification of citrulline residues under neutral conditions. We expect that it will provide a valuable tool for the study of protein citrullination.

Regioselective Access to 2-Iminoimidazolidines via AgF-Mediated Cascade Reactions.

A convergent access to substituted 2-iminoimidazolidines from aromatic amines and N-propargyl S-methylthiourea is developed via Ag(I)-mediated cascade guanylation-cyclization reactions. This method features high regioselectivity, excellent efficiency, and mild reaction conditions. Subsequent deprotection of the Boc (tert-butyloxycarbonyl) group under acidic conditions provides expedient access to aryl 2-aminoimidazole derivatives in a convenient manner.

BMAL1 regulates Propionibacterium acnes-induced skin inflammation via REV-ERBα in mice.

Acne vulgaris is a common skin disease, affecting over 80% of adolescents. Inflammation is known to play a central role in acne development. Here, we aimed to investigate the role of the central clock gene Bmal1 in acne-associated inflammation in mice. To this end, mice were injected intradermally with Propionibacterium acnes (P. acnes) to induce acne-associated skin inflammation. We found that Bmal1 and its target genes Rev-erbα, Dbp, Per1 and Cry2 were down-regulated in the skin of P. acnes-treated mice, suggesting a role of Bmal1 in the condition of acne. Supporting this, Bmal1-deleted or jet-lagged mice showed exacerbated P. acnes-induced inflammation in the skin. Regulation of P. acnes-induced inflammation by Bmal1 was further confirmed in RAW264.7 cells and primary mouse keratinocytes. Transcriptomic and protein expression analyses suggested that Bmal1 regulated P. acnes-induced inflammation via the NF-κB/NLRP3 axis, which is known to be repressed by REV-ERBα (a direct target of BMAL1). Moreover, loss of Rev-erbα in mice exacerbated P. acnes-induced inflammation. In addition, Rev-erbα silencing attenuated the inhibitory effects of Bmal1 on P. acnes-induced inflammation. Bmal1 knockdown failed to modulate P. acnes-induced inflammation in Rev-erbα-silenced cells. It was thus proposed that Bmal1 restrained P. acnes-induced skin inflammation via its target REV-ERBα, which acts on the NF-κB/NLRP3 axis to repress inflammation. In conclusion, Bmal1 disruption is identified as a potential pathological factor of acne-associated inflammation. The findings increase our understanding of the crosstalk between skin clock and acne and suggest targeting circadian rhythms as a promising approach for management of acne.

Effects of tightening torque on screw stress and formation of implant-abutment microgaps: A finite element analysis.

STATEMENT OF PROBLEM: The mechanical behavior of the conical connection implant with different torque levels requires evaluation. PURPOSE: The purpose of this finite element analysis study was to investigate the impact of abutment screw torque on the formation of microgaps at the implant-to-abutment interface of a conical connection under oblique loading. This is important because it is thought that bacteria can invade the internal implant space through the abutment-implant microgaps, causing peri-implantitis. MATERIAL AND METHODS: Three-dimensional finite element analyses of the conical implant-abutment connection were performed by using screw torques of 20 Ncm and 30 Ncm. Oblique loads from 10 N to 280 N were applied to the prosthesis placed on the implant. The maximum von Mises stress in the abutment screw, the microgap formation process, and the critical load for bridging the internal implant space were evaluated. RESULTS: The stresses in the abutment screw under oblique loading had limited sensitivity to the screw torque. However, the residual stress in the screw with a 30-Ncm torque was 35% higher than that with a 20-Ncm torque in the absence of an external load. The area in contact at the implant-to-abutment interface decreased with increasing load for both torque values. The critical load for bridging the internal implant space was 160 N for a screw torque of 20 Ncm and 220 N for a screw torque of 30 Ncm. The maximum gap size was approximately 470 µm with all the loads. CONCLUSIONS: Increasing the screw torque can reduce the formation of microgaps at the implant-to-abutment interface. However, this will result in higher mean stress in the abutment screw, which may reduce its fatigue life and consequently that of the prosthesis. Further research is needed to evaluate the relationship between the abutment screw torque and microleakage in implant-supported restorations.

Ag(I)-Catalyzed rapid access to 2-amino-4-methylenethiazolines with potential applications in bioconjugation chemistry.

An Ag(i)-catalyzed tandem addition-cyclization of isothiocyanate and propargylamine was successfully applied to the synthesis of 2-amino-4-methylenethiazolines. This route features an unprecedented fast reaction rate with full conversion reached within 10 min at room temperature for aromatic isothiocyanates and excellent chemoselectivity for exocyclic products. The application of this strategy is further highlighted by the accelerated bioconjugation of propargylamine with fluorescein isothiocyanate (FITC) under Ag(i)-catalysis.

Prediabetes and the risk of heart failure: A meta-analysis.

AIM: To determine the role of prediabetes in the incidence of heart failure (HF). MATERIALS AND METHODS: We searched electronic databases (PubMed, Embase, Google Scholar and OpenGrey) for studies up to 31 December 2020. Studies were included for meta-analysis if they reported adjusted relative risks (RRs) and 95% confidence intervals (CIs) for the risk of HF for prediabetes compared with normoglycaemia. Prediabetes was defined as impaired fasting glucose (IFG) according to the World Health Organization (WHO) criteria (IFG-WHO), or according to the American Diabetes Association (ADA) definition (IFG-ADA), impaired glucose tolerance (IGT), raised HbA1c according to the ADA criteria (HbA1c-ADA), or according to the International Expert Committee (IEC) recommendation (HbA1c-IEC). RESULTS: A total of 15 studies comprising 9,827,430 individuals provided data for this analysis. The median follow-up duration of the included studies was 8.0 years. Compared with normoglycaemia, prediabetes was associated with an increased risk for HF: IFG-ADA (RR: 1.09, 95% CI: 1.05-1.13), IFG-WHO (RR: 1.18, 95% CI: 1.07-1.30), IGT (RR 1.58, 95% CI 1.04-2.39), HbA1c-ADA (RR 1.28, 95% CI 1.16-1.41) or HbA1c-IEC (RR 1.40, 95% CI 1.09-1.79), respectively. CONCLUSIONS: Prediabetes is associated with an increased risk of HF. Future studies are needed to evaluate effective treatments for prediabetes to prevent the development and progression of HF.

Characteristics of regulatory T-cell function in patients with chronic hepatitis B and C coinfection.

Regulatory T cells (Tregs) affect the pathogenesis and disease progression of chronic viral hepatitis. This study evaluated the frequency and function of Tregs in patients with chronic HBV/HCV coinfection. Seventy-four untreated HBV/HCV co-infected patients were enrolled in this study. These subjects were divided into four subgroups: HBV-active/HCV-active (BACA), HBV-inactive/HCV-active (BICA), HBV-active/HCV-inactive (BACI) and HBV-inactive/HCV-inactive (BICI). Treg frequency was calculated as the fraction of CD4+ Foxp3+ T cells among CD4+ T cells. Treg-mediated inhibition was measured as percent of inhibition of T-cell proliferation. The expression of interferon (IFN)-γ, tumour necrosis factor (TNF)-α and interleukin (IL)-10 with/without Treg inhibition was also studied. Among the patients, there were 8 cases of BACA (10.8%), 38 of BICA (51.4%), 14 of BACI (18.9%) and 14 of BICI (18.9%). The frequency of CD4+ Foxp3+ T cells was comparable between the four groups. The inhibitory function of Tregs among the patients in the BACA and BICA was higher than that in the BICI (BACA vs BICI, P = .0210; BICA vs BICI, P = .0301). Patients in the BACA and BICA had higher fibrosis-4 (FIB-4) scores and serum ALT levels and lower serum albumin levels than those of the other groups. ALT abnormality was significantly and independently associated with a higher Treg immunosuppressive ability. The IFN-γ expression of the effector T cells in the BACA was higher than that of the other groups. In conclusion, the inhibitory function of Tregs is higher among the HBV/HCV co-infected patients with active HCV infection. ALT abnormality plays a dominant role in Treg function.

Development and calibration of biochemical models for testing dental restorations.

Currently, resin composites are the most popular materials for dental restoration in clinical practice. Although the properties of such materials have been improved significantly, together with better clinical techniques used for their placement, early restoration failure still occurs too frequently. As clinical studies take years to complete, and new resin composites are being produced at ever increasing pace, laboratory assessment using accelerated but representative tests is necessary. The main types of failure in resin-composite restoration are tooth/restoration fracture and secondary caries, which are caused by a combination of mechanical and biochemical challenges. In this study, a biofilm model (S. mutans) and a chemical model (lactic-acid buffer) for producing artificial caries in bovine dentin are developed and calibrated against in situ data. Using a power law relationship between the demineralization depth and challenge duration, scale factors that convert the in vitro durations to the equivalent clinical durations are determined for different pH values for each model. The scale factors will allow the synchronization of biochemical and mechanical challenges in terms of their rates of action to potentially test resin-composite restoration in an accelerated but clinically representative manner. STATEMENT OF SIGNIFICANCE: Although the properties of resin composites for dental restoration have been improved significantly, early restoration failure still occurs too frequently. As clinical studies take years to complete, accelerated laboratory testing is necessary. Resin-composite restoration fail mainly through fracture and secondary caries, caused by a combination of mechanical and biochemical challenges. In this study, a biofilm and a chemical model for producing artificial caries in bovine dentin are calibrated against in situ data. Using a power law relationship between demineralization depth and challenge duration, scale factors are determined for different pH for each model. The scale factors will allow the synchronization of biochemical and mechanical challenges in testing resin-composite restoration in an accelerated but clinically representative manner.