Seasonal dynamics of the standard test species Lemna sp. in outdoor microcosms.

Lemna L. sp. is a free-floating aquatic macrophyte that plays a key role as a standard test species in aquatic risk assessment for herbicides and other contaminants. Population modeling can be used to extrapolate from laboratory to field conditions. However, there are insufficient data on longer-term seasonal dynamics of this species to evaluate such models. Therefore, several long-term growth experiments were conducted in outdoor microcosms (surface area 0.174 m2). Monitoring parameters included biomass, frond numbers, water parameters, and weather data. Three different datasets were generated: frond numbers and biomass from weekly to monthly destructively sampled microcosms; a year-round dataset of frond numbers from five continuously monitored microcosms; and seasonal growth rates without the effect of density dependence over 1-2 weeks in freshly inoculated microcosms. Lemna sp. reached a maximum of approximately 500 000 fronds m-2 and 190 g dry weight m-2. During the first winter, the microcosms were covered by ice for approximately four weeks, and Lemna sp. populations collapsed. The second winter was warmer, without any ice cover, and Lemna sp. populations maintained high abundance throughout the winter. Dry weight per frond was not constant throughout the year but was highest in autumn and winter. Growth rates without density dependence under outdoor environmental conditions reached 0.29 day-1 for frond number, 0.43 day-1 for fresh weight, and 0.39 day-1 for dry weight. In linear regressions, these growth rates were best explained by water temperature. For the populations continuously monitored throughout a year, the nitrogen-to-phosphorus ratio best explained the growth rate of frond numbers. This study yielded a relevant dataset for testing and refining Lemna population models used in chemical risk assessment as well as for managing ecosystems and combating the effects of eutrophication. Integr Environ Assess Manag 2024;00:1-14. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Biofabrication's Contribution to the Evolution of Cultured Meat.

Cultured Meat (CM) is a growing field in cellular agriculture, driven by the environmental impact of conventional meat production, which contributes to climate change and occupies ≈70% of arable land. As demand for meat alternatives rises, research in this area expands. CM production relies on tissue engineering techniques, where a limited number of animal cells are cultured in vitro and processed to create meat-like tissue comprising muscle and adipose components. Currently, CM is primarily produced on a small scale in pilot facilities. Producing a large cell mass based on suitable cell sources and bioreactors remains challenging. Advanced manufacturing methods and innovative materials are required to subsequently process this cell mass into CM products on a large scale. Consequently, CM is closely linked with biofabrication, a suite of technologies for precisely arranging cellular aggregates and cell-material composites to construct specific structures, often using robotics. This review provides insights into contemporary biomedical biofabrication technologies, focusing on significant advancements in muscle and adipose tissue biofabrication for CM production. Novel materials for biofabricating CM are also discussed, emphasizing their edibility and incorporation of healthful components. Finally, initial studies on biofabricated CM are examined, addressing current limitations and future challenges for large-scale production.

TWAc-Check: A New Approach to Determine the Appropriate Use of Time-Weighted Average Concentration in Aquatic Risk Assessment.

In pesticide risk assessment, regulatory acceptable concentrations for surface water bodies (RACsw,ch) are used that are derived from standard studies with continuous exposure of organisms to a test compound for days or months. These RACsw,ch are compared with the maximum tested concentration of more realistic exposure scenarios. However, the actual exposure duration could be notably shorter (e.g., hours) than the standard study, which intentionally leads to an overly conservative Tier 1 risk assessment. This discrepancy can be addressed in a risk assessment using the time-weighted average concentration (TWAc). In Europe, the applicability of TWAc for a particular risk assessment is evaluated using a complex decision scheme, which has been controversial; thus we propose an alternative approach: We used TWAc-check (which is based on the idea that the TWAc concept is just a model for aquatic risk assessment) to test whether the use of a TWAc is appropriate for such assessment. The TWAc-check method works by using predicted-measured diagrams to test how well the TWAc model predicts experimental data from peak exposure experiments. Overestimated effects are accepted because the conservatism of the TWAc model is prioritized over the goodness of fit. We illustrate the applicability of TWAc-check by applying it to various data sets for different species and substances. We demonstrate that the applicability is case dependent. Specifically, TWAc-check correctly identifies that the use of TWAc is not appropriate for early onset of effects or delayed effects. The proposed concept shows that the time window is a decisive factor as to whether or not the model is acceptable and that this concept can be used as a potential refinement option prior to the use of toxicokinetic-toxicodynamic models. Environ Toxicol Chem 2022;41:1778-1787. © 2022 Bayer AG. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Scaffolds for Cultured Meat on the Basis of Polysaccharide Hydrogels Enriched with Plant-Based Proteins.

The world population is growing and alternative ways of satisfying the increasing demand for meat are being explored, such as using animal cells for the fabrication of cultured meat. Edible biomaterials are required as supporting structures. Hence, we chose agarose, gellan and a xanthan-locust bean gum blend (XLB) as support materials with pea and soy protein additives and analyzed them regarding material properties and biocompatibility. We successfully built stable hydrogels containing up to 1% pea or soy protein. Higher amounts of protein resulted in poor handling properties and unstable gels. The gelation temperature range for agarose and gellan blends is between 23-30 °C, but for XLB blends it is above 55 °C. A change in viscosity and a decrease in the swelling behavior was observed in the polysaccharide-protein gels compared to the pure polysaccharide gels. None of the leachates of the investigated materials had cytotoxic effects on the myoblast cell line C2C12. All polysaccharide-protein blends evaluated turned out as potential candidates for cultured meat. For cell-laden gels, the gellan blends were the most suitable in terms of processing and uniform distribution of cells, followed by agarose blends, whereas no stable cell-laden gels could be formed with XLB blends.

Cell-derived and enzyme-based decellularized extracellular matrix exhibit compositional and structural differences that are relevant for its use as a biomaterial.

Due to its availability and minimal invasive harvesting human adipose tissue-derived extracellular matrix (dECM) is often used as a biomaterial in various tissue engineering and healthcare applications. Next to dECM, cell-derived ECM (cdECM) can be generated by and isolated from in vitro cultured cells. So far both types of ECM were investigated extensively toward their application as (bio)material in tissue engineering and healthcare. However, a systematic characterization and comparison of soft tissue dECM and cdECM is still missing. In this study, we characterized dECM from human adipose tissue, as well as cdECM from human adipose-derived stem cells, toward their molecular composition, structural characteristics, and biological purity. The dECM was found to exhibit higher levels of collagens and lower levels of sulfated glycosaminoglycans compared with cdECMs. Structural characteristics revealed an immature state of the fibrous part of cdECM samples. By the identified differences, we aim to support researchers in the selection of a suitable ECM-based biomaterial for their specific application and the interpretation of obtained results.

Seasonal dynamics of the macrophyte test species Myriophyllum spicatum over two years in experimental ditches for population modeling application in risk assessment.

Myriophyllum spicatum is a sediment-rooted, aquatic macrophyte growing submerged, with a wide geographical distribution and high ecological relevance in freshwater ecosystems. It is used in testing and risk assessment for pesticides in water and sediment. Population models enable effects measured under laboratory conditions to be extrapolated to effects expected in the field with time-variable environmental factors including exposure. These models are a promising tool in higher-tier risk assessments. However, there is a lack of data on the seasonal dynamics of M. spicatum, which is needed to test model predictions of typical population dynamics in the field. To generate such data, a two-year study was set up in outdoor experimental systems from May 2017 to May 2019. The growth of M. spicatum was monitored in 0.2025 m2 plant baskets installed in an experimental ditch. Parameters monitored included biomass (fresh weight [FW] and dry weight [DW]), shoot length, seasonal short-term growth rates of shoots, relevant environmental parameters, and weather data. The results showed a clear seasonal pattern of biomass and shoot length and their variability. M. spicatum reached a maximum total shoot length (TSL) of 279 m m-2 and a maximum standing crop above-ground DW of 262 g m-2 . Periodical growth rates reached up to 0.072, 0.095, and 0.085 day-1 for total length, FW, and DW, respectively. Multivariate regression revealed that pH (as a surrogate for the availability of carbon species) and water temperature could explain a significant proportion of the variability in M. spicatum growth rates (p < 0.05). This study has provided an ecologically relevant data set on seasonal population dynamics representative of shallow freshwater ecosystems, which can be used to test and refine population models for use in chemical risk assessment and ecosystem management. Integr Environ Assess Manag 2022;18:1375-1386. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Adipose stem cell-derived extracellular matrix represents a promising biomaterial by inducing spontaneous formation of prevascular-like structures by mvECs.

Tissue constructs of physiologically relevant scale require a vascular system to maintain cell viability. However, in vitro vascularization of engineered tissues is still a major challenge. Successful approaches are based on a feeder layer (FL) to support vascularization. Here, we investigated whether the supporting effect on the self-assembled formation of prevascular-like structures by microvascular endothelial cells (mvECs) originates from the FL itself or from its extracellular matrix (ECM). Therefore, we compared the influence of ECM, either derived from adipose-derived stem cells (ASCs) or adipogenically differentiated ASCs, with the classical cell-based FL. All cell-derived ECM (cdECM) substrates enabled mvEC growth with high viability. Prevascular-like structures were visualized by immunofluorescence staining of endothelial surface protein CD31 and could be observed on all cdECM and FL substrates but not on control substrate collagen I. On adipogenically differentiated ECM, longer and higher branched structures could be found compared with stem cell cdECM. An increased concentration of proangiogenic factors was found in cdECM substrates and FL approaches compared with controls. Finally, the expression of proteins associated with tube formation (E-selectin and thrombomodulin) was confirmed. These results highlight cdECM as promising biomaterial for adipose tissue engineering by inducing the spontaneous formation of prevascular-like structures by mvECs.

Herbicide risk assessments of non-target terrestrial plant communities: A graphical user interface for the plant community model IBC-grass.

Plants located adjacent to agricultural fields are important for maintaining biodiversity in semi-natural landscapes. To avoid undesired impacts on these plants due to herbicide application on the arable fields, regulatory risk assessments are conducted prior to registration to ensure proposed uses of plant protection products do not present an unacceptable risk. The current risk assessment approach for these non-target terrestrial plants (NTTPs) examines impacts at the individual-level as a surrogate approach for protecting the plant community due to the inherent difficulties of directly assessing population or community level impacts. However, modelling approaches are suitable higher tier tools to upscale individual-level effects to community level. IBC-grass is a sophisticated plant community model, which has already been applied in several studies. However, as it is a console application software, it was not deemed sufficiently user-friendly for risk managers and assessors to be conveniently operated without prior expertise in ecological models. Here, we present a user-friendly and open source graphical user interface (GUI) for the application of IBC-grass in regulatory herbicide risk assessment. It facilitates the use of the plant community model for predicting long-term impacts of herbicide applications on NTTP communities. The GUI offers two options to integrate herbicide impacts: (1) dose responses based on current standard experiments (acc. to testing guidelines) and (2) based on specific effect intensities. Both options represent suitable higher tier options for future risk assessments of NTTPs as well as for research on the ecological relevance of effects.

Direct impact of cisplatin on mitochondria induces ROS production that dictates cell fate of ovarian cancer cells.

Patients with high-grade serous ovarian cancer (HGSC) frequently receive platinum-based chemotherapeutics, such as cisplatin. Cisplatin binds to DNA and induces DNA-damage culminating in mitochondria-mediated apoptosis. Interestingly, mitochondrial DNA is critically affected by cisplatin but its relevance in cell death induction is scarcely investigated. We find that cisplatin sensitive HGSC cell lines contain higher mitochondrial content and higher levels of mitochondrial ROS (mtROS) than cells resistant to cisplatin induced cell death. In clonal sub-lines from OVCAR-3 mitochondrial content and basal oxygen consumption rate correlate with sensitivity to cisplatin induced apoptosis. Mitochondria are in two ways pivotal for cisplatin sensitivity because not only knock-down of BAX and BAK but also the ROS scavenger glutathione diminish cisplatin induced apoptosis. Mitochondrial ROS correlates with mitochondrial content and reduction of mitochondrial biogenesis by knock-down of transcription factors PGC1α or TFAM attenuates both mtROS induction and cisplatin induced apoptosis. Increasing mitochondrial ROS by inhibition or knock-down of the ROS-protective uncoupling protein UCP2 enhances cisplatin induced apoptosis. Similarly, enhancing ROS by high-dose ascorbic acid or H2O2 augments cisplatin induced apoptosis. In summary, mitochondrial content and the resulting mitochondrial capacity to produce ROS critically determine HGSC cell sensitivity to cisplatin induced apoptosis. In line with this observation, data from the human protein atlas (www.proteinatlas.org) indicates that high expression of mitochondrial marker proteins (TFAM and TIMM23) is a favorable prognostic factor in ovarian cancer patients. Thus, we propose mitochondrial content as a biomarker for the response to platinum-based therapies. Functionally, this might be exploited by increasing mitochondrial content or mitochondrial ROS production to enhance sensitivity to cisplatin based anti-cancer therapies.

Simulation of herbicide impacts on a plant community: comparing model predictions of the plant community model IBC-grass to empirical data.

BACKGROUND: Semi-natural plant communities such as field boundaries play an important ecological role in agricultural landscapes, e.g., provision of refuge for plant and other species, food web support or habitat connectivity. To prevent undesired effects of herbicide applications on these communities and their structure, the registration and application are regulated by risk assessment schemes in many industrialized countries. Standardized individual-level greenhouse experiments are conducted on a selection of crop and wild plant species to characterize the effects of herbicide loads potentially reaching off-field areas on non-target plants. Uncertainties regarding the protectiveness of such approaches to risk assessment might be addressed by assessment factors that are often under discussion. As an alternative approach, plant community models can be used to predict potential effects on plant communities of interest based on extrapolation of the individual-level effects measured in the standardized greenhouse experiments. In this study, we analyzed the reliability and adequacy of the plant community model IBC-grass (individual-based plant community model for grasslands) by comparing model predictions with empirically measured effects at the plant community level. RESULTS: We showed that the effects predicted by the model IBC-grass were in accordance with the empirical data. Based on the species-specific dose responses (calculated from empirical effects in monocultures measured 4 weeks after application), the model was able to realistically predict short-term herbicide impacts on communities when compared to empirical data. CONCLUSION: The results presented in this study demonstrate an approach how the current standard greenhouse experiments-measuring herbicide impacts on individual-level-can be coupled with the model IBC-grass to estimate effects on plant community level. In this way, it can be used as a tool in ecological risk assessment.

Cyclin D1-CDK4 activity drives sensitivity to bortezomib in mantle cell lymphoma by blocking autophagy-mediated proteolysis of NOXA.

BACKGROUND: Mantle cell lymphoma (MCL) is an aggressive B-non-Hodgkin lymphoma with generally poor outcome. MCL is characterized by an aberrantly high cyclin D1-driven CDK4 activity. New molecular targeted therapies such as inhibitors of the ubiquitin-proteasome system (UPS) have shown promising results in preclinical studies and MCL patients. Our previous research revealed stabilization of the short-lived pro-apoptotic NOXA as a critical determinant for sensitivity to these inhibitors. It is currently unclear how cyclin D1 overexpression and aberrant CDK4 activity affect NOXA stabilization and treatment efficacy of UPS inhibitors in MCL. METHODS: The effect of cyclin D1-driven CDK4 activity on response of MCL cell lines and primary cells to proteasome inhibitor treatment was investigated using survival assays (Flow cytometry, AnnexinV/PI) and Western blot analysis of NOXA protein. Half-life of NOXA protein was determined by cycloheximide treatment and subsequent Western blot analysis. The role of autophagy was analyzed by LC3-II protein expression and autophagolysosome detection. Furthermore, silencing of autophagy-related genes was performed using siRNA and MCL cells were treated with autophagy inhibitors in combination with proteasome and CDK4 inhibition. RESULTS: In this study, we show that proteasome inhibitor-mediated cell death in MCL depends on cyclin D1-driven CDK4 activity. Inhibition of cyclin D1/CDK4 activity significantly reduced proteasome inhibitor-mediated stabilization of NOXA protein, mainly driven by an autophagy-mediated proteolysis. Bortezomib-induced cell death was significantly potentiated by compounds that interfere with autophagosomal function. Combined treatment with bortezomib and autophagy inhibitors enhanced NOXA stability leading to super-induction of NOXA protein. In addition to established autophagy modulators, we identified the fatty acid synthase inhibitor orlistat to be an efficient autophagy inhibitor when used in combination with bortezomib. Accordingly, this combination synergistically induced apoptosis both in MCL cell lines and in patient samples. CONCLUSION: Our data demonstrate that CDK4 activity in MCL is critical for NOXA stabilization upon treatment with UPS inhibitors allowing preferential induction of cell death in cyclin D transformed cells. Under UPS blocked conditions, autophagy appears as the critical regulator of NOXA induction. Therefore, inhibitors of autophagy are promising candidates to increase the activity of proteasome inhibitors in MCL.

Potential impact of effects on reproductive attributes induced by herbicides on a plant community.

Current herbicide risk assessment guidelines for nontarget terrestrial plants require testing effects on young, vulnerable life stages (i.e., seedling emergence [and subsequent growth] and vegetative vigor [growth and dry wt]) but not directly on the reproduction of plants. However, the European Food Safety Authority (EFSA) has proposed that effects on reproduction might be considered when evaluating the potential effects on plants. We adapted the plant community model for grassland (IBC-grass) to give insight into the current debate on the sensitivity of reproductive versus vegetative endpoints in ecological risk assessment. In an extensive sensitivity analysis of this model, we compared plant attributes potentially affected by herbicides and the consequences for long-term plant population dynamics and plant diversity. This evaluation was implemented by reducing reproductive as well as vegetative endpoints by certain percentages (e.g., 10-90%) as a theoretical assumption. Plant mortality and seed sterility (i.e., inability of seeds to germinate) were the most sensitive attributes. Our results indicated that effects on seed production at off-field exposure rates must be very strong to have an impact on the risk assessment. Otherwise, effects on seed production are compensated for by the soil seed bank. The present study highlights the usefulness of community level modeling studies to support regulators in their decisions on the appropriate risk assessment endpoints and provides confidence in their assessments. Environ Toxicol Chem 2018;37:1707-1722. © 2018 SETAC.

Dual targeting of MCL1 and NOXA as effective strategy for treatment of mantle cell lymphoma.

Imbalances in the composition of BCL2 family proteins contribute to tumourigenesis and therapy resistance of mantle cell lymphoma (MCL), making these proteins attractive therapy targets. We studied the efficiency of dual targeting the NOXA/MCL1 axis by combining fatty acid synthase inhibitors (NOXA stabilization) with the CDK inhibitor Dinaciclib (MCL1 reduction). This combination synergistically induced apoptosis in cell lines and primary MCL cells and led to almost complete inhibition of tumour progression in a mouse model. Apoptosis was NOXA-dependent and correlated with the NOXA/MCL1 ratio, highlighting the importance of the NOXA/MCL1 balance for effective cell death induction in MCL.

Hyperthermia Synergizes with Chemotherapy by Inhibiting PARP1-Dependent DNA Replication Arrest.

Although hyperthermia offers clinical appeal to sensitize cells to chemotherapy, this approach has been limited in terms of long-term outcome as well as economic and technical burden. Thus, a more detailed knowledge about how hyperthermia exerts its effects on chemotherapy may illuminate ways to improve the approach. Here, we asked whether hyperthermia alters the response to chemotherapy-induced DNA damage and whether this mechanism is involved in its sensitizing effect in BRCA-competent models of ovarian and colon cancer. Notably, we found that hyperthermia delayed the repair of DNA damage caused by cisplatin or doxorubicin, acting upstream of different repair pathways to block histone polyADP-ribosylation (PARylation), a known effect of chemotherapy. Furthermore, hyperthermia blocked this histone modification as efficiently as pharmacologic inhibitors of PARP (PARPi), producing comparable delay in DNA repair, induction of double-strand breaks (DSB), and cell cytotoxicity after chemotherapy. Mechanistic investigations indicated that inhibiting PARylation by either hyperthermia or PARPi induced lethal DSB upon chemotherapy treatment not only by reducing DNA repair but also by preventing replication fork slowing. Overall, our work reveals how PARP blockade, either by hyperthermia or small-molecule inhibition, can increase chemotherapy-induced damage in BRCA-competent cells. Cancer Res; 76(10); 2868-75. ©2016 AACR.

How TK-TD and population models for aquatic macrophytes could support the risk assessment for plant protection products.

This case study of the Society of Environmental Toxicology and Chemistry (SETAC) workshop MODELINK demonstrates the potential use of mechanistic effects models for macrophytes to extrapolate from effects of a plant protection product observed in laboratory tests to effects resulting from dynamic exposure on macrophyte populations in edge-of-field water bodies. A standard European Union (EU) risk assessment for an example herbicide based on macrophyte laboratory tests indicated risks for several exposure scenarios. Three of these scenarios are further analyzed using effect models for 2 aquatic macrophytes, the free-floating standard test species Lemna sp., and the sediment-rooted submerged additional standard test species Myriophyllum spicatum. Both models include a toxicokinetic (TK) part, describing uptake and elimination of the toxicant, a toxicodynamic (TD) part, describing the internal concentration-response function for growth inhibition, and a description of biomass growth as a function of environmental factors to allow simulating seasonal dynamics. The TK-TD models are calibrated and tested using laboratory tests, whereas the growth models were assumed to be fit for purpose based on comparisons of predictions with typical growth patterns observed in the field. For the risk assessment, biomass dynamics are predicted for the control situation and for several exposure levels. Based on specific protection goals for macrophytes, preliminary example decision criteria are suggested for evaluating the model outputs. The models refined the risk indicated by lower tier testing for 2 exposure scenarios, while confirming the risk associated for the third. Uncertainties related to the experimental and the modeling approaches and their application in the risk assessment are discussed. Based on this case study and the assumption that the models prove suitable for risk assessment once fully evaluated, we recommend that 1) ecological scenarios be developed that are also linked to the exposure scenarios, and 2) quantitative protection goals be set to facilitate the interpretation of model results for risk assessment.

A toxicokinetic and toxicodynamic modeling approach using Myriophyllum spicatum to predict effects caused by short-term exposure to a sulfonylurea.

Toxicokinetic and toxicodynamic models are a promising tool to address the effects of time-variable chemical exposure. Standard toxicity tests usually rely on static concentrations, but these chemical exposure patterns are unlikely to appear in the field, where time-variable exposure of chemicals is typical. In the present study, toxicodynamic processes were integrated into an existing model that includes the toxicokinetics and growth of the aquatic plant Myriophyllum spicatum, to predict the impact on plant growth of 2 iofensulfuron short-term exposure patterns. To establish a method that can be used with standard data from risk assessments, the toxicodynamics of iofensulfuron were based on effect data from a 14-d standard toxicity test using static concentrations. Modeling showed that the toxicokinetic and toxicodynamic growth model of M. spicatum can be successfully used to predict effects of short-term iofensulfuron exposure by using effect data from a standard toxicity test. A general approach is presented, in which time-variable chemical exposures can be evaluated more realistically without conducting additional toxicity studies.

Efficacy of imidacloprid 10%/moxidectin 1% (Advocate/Advantage Multi) against fleas (Ctenocephalides felis felis) on ferrets (Mustela putorius furo).

Ferrets (Mustela putorius furo) are becoming increasingly popular as pets and are kept in households with other pet animals such as dogs and cats, from which they may catch flea infestations with the predominant flea species Ctenocephalides felis. In this study, the efficacy of imidacloprid/moxidectin spot-on (Advocate/Advantage Multi) was investigated in the therapy and prevention of flea infestation in ferrets. Sixteen adult ferrets of varying weights and ages and of both sexes were included. Ferrets were infested with 50 fleas each on days -7, -1, 7, 14, 21, and 28. On study day -6, the animals were randomized into two groups based on body weight and flea count. Each ferret allocated to group 1 was treated with 0.4 ml of imidacloprid 10%/moxidectin 1% (Advocate/Advantage Multi). The ferrets in group 2 remained untreated. Flea counts were performed by combing 24 to 48 h after infestation. The primary efficacy criterion was the reduction in the number of fleas at each time point post treatment compared to the ferrets in the untreated control group. On day 1, the therapeutic efficacy was 100%. The preventative efficacy was 100% at 1 and 2 weeks post treatment, and it was >97% and >90% at 3 and 4 weeks post treatment. No local or systemic side effects were observed in any of the ferrets treated.