RESUMEN
Conductive hydrogels have gained interest in biomedical applications and soft electronics. To tackle the challenge of ionic hydrogels falling short of desired mechanical properties in previous studies, our investigation aimed to understand the pivotal structural factors that impact the conductivity and mechanical behavior of polyethylene glycol (PEG)-based hydrogels with ionic conductivity. Polyether urethane diacrylamide (PEUDAm), a functionalized long-chain macromer based on PEG, was used to synthesize hydrogels with ionic conductivity conferred by incorporating ions into the liquid phase of hydrogel. The impact of salt concentration, water content, temperature, and gel formation on both mechanical properties and conductivity was characterized to establish parameters for tuning hydrogel properties. To further expand the range of conductivity available in these ionic hydrogels, 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) was incorporated as a single copolymer network or double network configuration. As expected, conductivity in these ionic gels was primarily driven by ion diffusivity and charge density, which was dependent on hydrogel network formation and swelling. Copolymer network structure had minimal effect on the conductivity which was primarily driven by counter-ion equilibrium; however, the mechanical properties and equilibrium swelling was strongly dependent on network structure. The structure-property relationships elucidated here enables the rationale design of this new double network hydrogel to achieve target properties for a broad range of applications.
RESUMEN
Chondrosarcoma (CS) is a malignant bone tumor arising from cartilage-producing cells. The conventional subtype of CS typically develops within a dense cartilaginous matrix, creating an environment deficient in oxygen and nutrients, necessitating metabolic adaptation to ensure proliferation under stress conditions. Although ketone bodies (KBs) are oxidized by extrahepatic tissue cells such as the heart and brain, specific cancer cells, including CS cells, can undergo ketolysis. In this study, we found that KBs catabolism is activated in CS cells under nutrition-deprivation conditions. Interestingly, cytosolic ß-hydroxybutyrate dehydrogenase 2 (BDH2), rather than mitochondrial BDH1, is expressed in these cells, indicating a specific metabolic adaptation for ketolysis in this bone tumor. The addition of the KB, ß-Hydroxybutyrate (ß-HB) in serum-starved CS cells re-induced the expression of BDH2, along with the key ketolytic enzyme 3-oxoacid CoA-transferase 1 (OXCT1) and monocarboxylate transporter-1 (MCT1). Additionally, internal ß-HB production was quantified in supplied and starved cells, suggesting that CS cells are also capable of ketogenesis alongside ketolysis. These findings unveil a novel metabolic adaptation wherein nutrition-deprived CS cells utilize KBs for energy supply and proliferation.
RESUMEN
Echeveria gigantea, native of Mexico (Reyes et al. 2011), holds economic importance as it is marketed as a potted plant and cut flower due to its drought-tolerant capabilities and aesthetic appeal. In September 2023, a field sampling was conducted at the Research Center in Horticulture and Native Plants (18°55'56.6" N, 98°24'01.5" W) of UPAEP University. Echeveria gigantea cv. Quilpalli plants with white mold symptoms were found in an area of 0.5 ha, with an incidence of 40% and severity of 50% on severely affected stems. The symptoms included chlorosis of older foliage, necrosis at the base of the stem, and soft rot with abundant white to gray mycelium and abundant production of irregular sclerotia resulting in wilted plants. The fungus was isolated from 30 symptomatic plants. Sclerotia were collected, sterilized in 3% NaOCl, rinsed with sterile distilled water (SDW), and plated on Potato Dextrose Agar (PDA) with sterile forceps. Subsequently, a dissecting needle was used to place fragments of mycelium directly on PDA. Plates were incubated at 23 °C in darkness. A total of 30 isolates were obtained using the hyphal-tip method, one from each diseased plant (15 isolates from sclerotia and 15 from mycelium). After 6 days, colonies had fast-growing, dense, cottony-white aerial mycelium forming irregular sclerotia of 3.67 ± 1.13 mm (n=100). Each Petri dish produced 32.47 ± 7.5 sclerotia (n=30), after 12 days. The sclerotia were initially white and gradually turned black. The isolates were tentatively identified as Sclerotinia sclerotiorum based on morphological characteristics (Saharan and Mehta 2008). Two isolates were selected for molecular identification. Genomic DNA was extracted using the CTAB protocol. The ITS region and the glyceraldehyde 3-phosphate dehydrogenase (G3PDH) gene were sequenced for two randomly selected isolates (White et al. 1990; Staats et al. 2005). The ITS and G3PDH sequences of the SsEg9 isolate were deposited in GenBank (ITS-OR816006; G3PDH-OR879212). BLAST analysis of the partial ITS (510 bp) and G3PDH (915 bp) sequences showed 100% and 99.78% similarity to S. sclerotiorum isolates (GenBank: MT101751 and MW082601). Pathogenicity was confirmed by inoculating 30 120-day-old E. gigantea cv. Quilpalli plants grown in pots with sterile soil. Ten sclerotia were deposited at the base of the stem, 10 mm below the soil surface. As control treatment, SDW was applied to 10 plants. The plants were placed in a greenhouse at 23 °C and 90% relative humidity. After 16 days, all inoculated plants displayed symptoms similar to those observed in the field. Control plants did not display any symptoms. The fungus was reisolated from the inoculated stems, fulfilling Koch's postulates. The pathogenicity tests were repeated three times. Recently S. sclerotiorum has been reported causing white mold on cabbage in the state of Puebla, Mexico (Terrones-Salgado et al. 2023). To the best of our knowledge, this is the first report of S. sclerotiorum causing white mold on E. gigantea in Mexico. Information about diseases affecting this plant is very limited, so this research is crucial for designing integrated management strategies and preventing spread to other production areas.
RESUMEN
Breast cancer ranks among the most commonly diagnosed cancers worldwide and bears the highest mortality rate. As an integral component of cancer treatment, mastectomy entails the complete removal of the affected breast. Typically, breast reconstruction, involving the use of silicone implants (augmentation mammaplasty), is employed to address the aftermath of mastectomy. To mitigate postoperative risks associated with mammaplasty, such as capsular contracture or bacterial infections, the functionalization of breast implants with coatings of cyclodextrin polymers as drug delivery systems represents an excellent alternative. In this context, our work focuses on the application of a mathematical model for simulating drug release from breast implants coated with cyclodextrin polymers. The proposed model considers a unidirectional diffusion process following Fick's second law, which was solved using the orthogonal collocation method, a numerical technique employed to approximate solutions for ordinary and partial differential equations. We conducted simulations to obtain release profiles for three therapeutic molecules: pirfenidone, used for preventing capsular contracture; rose Bengal, an anticancer agent; and the antimicrobial peptide KR-12. Furthermore, we calculated the diffusion profiles of these drugs through the cyclodextrin polymers, determining parameters related to diffusivity, solute solid-liquid partition coefficients, and the Sherwood number. Finally, integrating these parameters in COMSOL multiphysics simulations, the unidirectional diffusion mathematical model was validated.
RESUMEN
There is an urgent clinical need for a treatment regimen that addresses the underlying pathophysiology of ventricular arrhythmias, the leading cause of sudden cardiac death. The current report describes the design of an injectable hydrogel electrode and successful deployment in a pig model with access far more refined than any current pacing modalities allow. In addition to successful cardiac capture and pacing, analysis of surface ECG tracings and three-dimensional electroanatomic mapping revealed a QRS morphology comparable to native sinus rhythm, strongly suggesting the hydrogel electrode captures the deep septal bundle branches and Purkinje fibers. In an ablation model, electroanatomic mapping data demonstrated that the activation wavefront from the hydrogel reaches the mid-myocardium and endocardium much earlier than current single-point pacing modalities. Such uniform activation of broad swaths of tissue enables an opportunity to minimize the delayed myocardial conduction of heterogeneous tissue that underpins re-entry. Collectively, these studies demonstrate the feasibility of a new pacing modality that most closely resembles native conduction with the potential to eliminate lethal re-entrant arrhythmias and provide painless defibrillation.
Asunto(s)
Fascículo Atrioventricular , Hidrogeles , Animales , Porcinos , Fascículo Atrioventricular/fisiología , Estimulación Cardíaca Artificial/métodos , Ramos Subendocárdicos , Electrodos , Arritmias Cardíacas/terapia , Electrocardiografía/métodosRESUMEN
Stem cell therapy and skin substitutes address the stalled healing of chronic wounds in order to promote wound closure; however, the high cost and regulatory hurdles of these treatments limit patient access. A low-cost method to induce bioactive healing has the potential to substantially improve patient care and prevent wound-induced limb loss. A previous study reported that bioactive factors derived from apoptotic-like mesenchymal stem cells (MSCs) demonstrated anti-inflammatory and proangiogenic effects and improved ischemic muscle regeneration. In this work, these MSC-derived bioactive factors were loaded into a hydrogel foam to harness immunomodulatory and angiogenic properties from MSC components to facilitate chronic wound healing without the high cost and translational challenges of cell therapies. After incorporation of bioactive factors, the hydrogel foam retained high absorbency, moisture retention, and target water vapor transmission rate. High loading efficiency was confirmed and release studies indicated that over 90% of loaded factors were released within 24 h. Ethylene oxide sterilization and 4-week storage did not affect the bioactive factor release profile or physical properties of the hydrogel foam dressing. Bioactivity retention of the released factors was also confirmed for as-sterilized, 4°C-stored, and -20°C-stored bioactive hydrogel foams as determined by relevant gene expression levels in treated pro-inflammatory (M1) macrophages. These results support the use of the bioactive dressings as an off-the-shelf product. Overall, this work reports a new method to achieve a first-line wound dressing with the potential to reduce persistent inflammation and promote angiogenesis in chronic wounds.
Asunto(s)
Vendajes , Hidrogeles , Células Madre Mesenquimatosas , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Hidrogeles/química , Hidrogeles/farmacología , Animales , Humanos , Ratones , Inductores de la Angiogénesis/farmacología , Cicatrización de Heridas/efectos de los fármacos , Neovascularización Fisiológica/efectos de los fármacos , Factores Inmunológicos/farmacologíaRESUMEN
Polymeric heart valves offer the potential to overcome the limited durability of tissue based bioprosthetic valves and the need for anticoagulant therapy of mechanical valve replacement options. However, developing a single-phase material with requisite biological properties and target mechanical properties remains a challenge. In this study, a composite heart valve material was developed where an electrospun mesh provides tunable mechanical properties and a hydrogel coating confers an antifouling surface for thromboresistance. Key biological responses were evaluated in comparison to glutaraldehyde-fixed pericardium. Platelet and bacterial attachment were reduced by 38% and 98%, respectively, as compared to pericardium that demonstrated the antifouling nature of the hydrogel coating. There was also a notable reduction (59%) in the calcification of the composite material as compared to pericardium. A custom 3D-printed hydrogel coating setup was developed to make valve composites for device-level hemodynamic testing. Regurgitation fraction (9.6 ± 1.8%) and effective orifice area (1.52 ± 0.34 cm2 ) met ISO 5840-2:2021 requirements. Additionally, the mean pressure gradient was comparable to current clinical bioprosthetic heart valves demonstrating preliminary efficacy. Although the hemodynamic properties are promising, it is anticipated that the random microarchitecture will result in suboptimal strain fields and peak stresses that may accelerate leaflet fatigue and degeneration. Previous computational work has demonstrated that bioinspired fiber microarchitectures can improve strain homogeneity of valve materials toward improving durability. To this end, we developed advanced electrospinning methodologies to achieve polyurethane fiber microarchitectures that mimic or exceed the physiological ranges of alignment, tortuosity, and curvilinearity present in the native valve. Control of fiber alignment from a random fiber orientation at a normalized orientation index (NOI) 14.2 ± 6.9% to highly aligned fibers at a NOI of 85.1 ± 1.4%. was achieved through increasing mandrel rotational velocity. Fiber tortuosity and curvilinearity in the range of native valve features were introduced through a post-spinning annealing process and fiber collection on a conical mandrel geometry, respectively. Overall, these studies demonstrate the potential of hydrogel-polyurethane fiber composite as a heart valve material. Future studies will utilize the developed advanced electrospinning methodologies in combination with model-directed fabrication toward optimizing durability as a function of fiber microarchitecture.
Asunto(s)
Bioprótesis , Prótesis Valvulares Cardíacas , Hidrogeles , Poliuretanos , Válvulas Cardíacas , PolímerosRESUMEN
Amoebae of the genus Acanthamoeba are etiological agents of amoebic keratitis, for which up to now there is no treatment of choice and one of its main risk factors is the use of contact lenses, including cosmetic contact lenses. Recently there has been an increase in amoebic keratitis cases due to the use of cosmetic contact lenses. Therefore, having a solution for the care of lenses with an efficient disinfectant effect that prevents the adhesion of trophozoites to lenses becomes essential. This study was carried out to determine the effect of 8 multipurpose contact lenses care solutions on Acanthamoeba castellanii trophozoites viability, and the efficiency of two of them to prevent the trophozoites adherence onto two cosmetic contact lenses (Acuvue 2, approved by the US Food and Drug Administration, and Magic Eye CCL, not approved). After 3 h of interaction, only AO Sept Plus, OPTI FREE Replenish, Renu Plus, Bio True and Multiplus significantly reduced the number of viable trophozoites with respect to the control; at 6 h Renu Plus, and at 12 h Conta Soft Plus and Multiplus, maintained the inhibitory effect. Only Opti Free Pure Moist did not significantly reduce the number of viable trophozoites. Multiplus and Opti Free Pure Moist (selected for their greater and lesser antiamibic effect) significantly reduced trophozoite adherence to both lenses; however, Opti Free Pure Moist was more efficient, despite the fact that A. castellanii adhered similarly to both lenses. Our results show that in all the multipurpose solutions evaluated, hundreds of viable A. castellanii trophozoites remain after several hours of incubation. Therefore, storage of the lenses in their case with MPS maintains the potential risk of amoebic keratitis in, cosmetic contact lenses wearers. Moreover, the use of CCL, not approved by the FDA, can increase the risk factor for AK since its poor manufacture can favor the permanence of amoebae, in addition to being a risk for corneal integrity.
RESUMEN
Emulsion-templated foams have displayed promise as injectable bone grafts; however, the use of a surfactant as an emulsifier resulted in relatively small pores and impedes cell attachment. Hydroxyapatite nanoparticles were explored as an alternative stabilizer to address these limitations. To this end, hydroxyapatite nanoparticles were first modified with myristic acid to generate the appropriate balance of hydrophobicity to stabilize a water-in-oil emulsion of neopentyl glycol diacrylate and 1,4-butanedithiol. In situ surface modification of the resulting foam with hydroxyapatite was confirmed with elemental mapping and transmission electron microscopy. Nanoparticle-stabilized foams displayed improved human mesenchymal stem cell viability (91 ± 5%) over surfactant-stabilized foams (23 ± 11%). Although the pore size was appropriate for bone grafting applications (115 ± 71 µm), the foams lacked the interconnected architecture necessary for cell infiltration. We hypothesized that a co-stabilization approach with both surfactant and nanoparticles could be used to achieve interconnected pores while maintaining improved cell attachment and larger pore sizes. A range of hydroxyapatite nanoparticle and surfactant concentrations were investigated to determine the effects on microarchitecture and cell behavior. By balancing these interactions, a co-stabilized foam was identified that possessed large, interconnected pores (108 ± 67 µm) and improved cell viability and attachment. The co-stabilized foam was then evaluated as an injectable bone graft including network formation, microscale integration with bone, push out strength, and compressive properties. Overall, this work demonstrated that in situ surface modification with nHA improved cell attachment while retaining desirable bone grafting features and injectability.
Asunto(s)
Trasplante Óseo , Nanopartículas , Humanos , Porosidad , Emulsiones , Durapatita , TensoactivosRESUMEN
Tuberculosis (TB) accounts for 1.6 million deaths annually and over 25% of deaths due to antimicrobial resistance. Mycobacterium tuberculosis (M.tb) drives MCL-1 expression (family member of anti-apoptotic BCL-2 proteins) to limit apoptosis and grow intracellularly in human macrophages. The feasibility of re-purposing specific MCL-1 and BCL-2 inhibitors to limit M.tb growth, using inhibitors that are in clinical trials and FDA-approved for cancer treatment has not be tested previously. We show that specifically inhibiting MCL-1 and BCL-2 induces apoptosis of M.tb-infected macrophages, and markedly reduces M.tb growth in human and murine macrophages, and in a pre-clinical model of human granulomas. MCL-1 and BCL-2 inhibitors limit growth of drug resistant and susceptible M.tb in macrophages and act in additive fashion with the antibiotics isoniazid and rifampicin. This exciting work uncovers targeting the intrinsic apoptosis pathway as a promising approach for TB host-directed therapy. Since safety and activity studies are underway in cancer clinics for MCL-1 and BCL-2 inhibitors, we expect that re-purposing them for TB treatment should translate more readily and rapidly to the clinic. Thus, the work supports further development of this host-directed therapy approach to augment current TB treatment.
Asunto(s)
Antineoplásicos , Antituberculosos , Reposicionamiento de Medicamentos , Mycobacterium tuberculosis , Proteína 1 de la Secuencia de Leucemia de Células Mieloides , Proteínas Proto-Oncogénicas c-bcl-2 , Tuberculosis , Animales , Humanos , Ratones , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Antituberculosos/farmacología , Antituberculosos/uso terapéutico , Antituberculosos/metabolismo , Macrófagos/efectos de los fármacos , Mycobacterium tuberculosis/efectos de los fármacos , Proteína 1 de la Secuencia de Leucemia de Células Mieloides/antagonistas & inhibidores , Proteína 1 de la Secuencia de Leucemia de Células Mieloides/metabolismo , Proteínas Proto-Oncogénicas c-bcl-2/antagonistas & inhibidores , Proteínas Proto-Oncogénicas c-bcl-2/metabolismo , Tuberculosis/tratamiento farmacológico , Tuberculosis/microbiologíaRESUMEN
Attachment of bacteria onto a surface, consequent signaling, and accumulation and growth of the surface-bound bacterial population are key initial steps in the formation of pathogenic biofilms. While recent reports have hinted that surface mechanics may affect the accumulation of bacteria on that surface, the processes that underlie bacterial perception of surface mechanics and modulation of accumulation in response to surface mechanics remain largely unknown. We use thin and thick hydrogels coated on glass to create composite materials with different mechanics (higher elasticity for thin composites; lower elasticity for thick composites) but with the same surface adhesivity and chemistry. The mechanical cue stemming from surface mechanics is elucidated using experiments with the opportunistic human pathogen Pseudomonas aeruginosa combined with finite-element modeling. Adhesion to thin composites results in greater changes in mechanical stress and strain in the bacterial envelope than does adhesion to thick composites with identical surface chemistry. Using quantitative microscopy, we find that adhesion to thin composites also results in higher cyclic-di-GMP levels, which in turn result in lower motility and less detachment, and thus greater accumulation of bacteria on the surface than does adhesion to thick composites. Mechanics-dependent c-di-GMP production is mediated by the cell-surface-exposed protein PilY1. The biofilm lag phase, which is longer for bacterial populations on thin composites than on thick composites, is also mediated by PilY1. This study shows clear evidence that bacteria actively regulate differential accumulation on surfaces of different stiffnesses via perceiving varied mechanical stress and strain upon surface engagement.
Asunto(s)
GMP Cíclico , Pseudomonas aeruginosa , Humanos , Pseudomonas aeruginosa/fisiología , GMP Cíclico/metabolismo , Biopelículas , Transducción de SeñalRESUMEN
Poly(ethylene glycol) (PEG)-based hydrogels have gained significant attention in the field of biomedical applications due to their versatility and antifouling properties. Acrylate-derivatized PEG hydrogels (PEGDA) are some of the most widely studied hydrogels; however, there has been debate around the degradation mechanism and predicting resorption rates. Several factors influence the degradation rate of PEG hydrogels, including backbone and endgroup chemistry, macromer molecular weight, and polymer concentration. In addition to hydrogel parameters, it is necessary to understand the influence of biological and environmental conditions (e.g., pH and temperature) on hydrogel degradation. Rigorous methods for monitoring degradation in both in vitro and in vivo settings are also critical to hydrogel design and development. Herein, we provide guidance on tailoring PEG hydrogel chemistry to achieve target hydrolytic degradation kinetics for both resorbable and biostable applications. A detailed overview of accelerated testing methods and hydrogel degradation characterization is provided to aid researchers in experimental design and interpreting in vitro-in vivo correlations necessary for predicting hydrogel device performance.
RESUMEN
OBJECTIVE: To investigate Covid-19 vaccination as a potential secondary public health benefit of case management for Medicaid beneficiaries with health and social needs. DATA SOURCES AND STUDY SETTING: The CommunityConnect case management program for Medicaid beneficiaries is run by Contra Costa Health, a county safety net health system in California. Program enrollment data were merged with comprehensive county vaccination records. STUDY DESIGN: Individuals with elevated risk of hospital and emergency department use were randomized each month to a case management intervention or usual care. Interdisciplinary case managers offered coaching, community referrals, healthcare connections, and other support based on enrollee interest and need. Using survival analysis with intent-to-treat assignment, we assessed rates of first-dose Covid-19 vaccination from December 2020 to September 2021. In exploratory sub-analyses we also examined effect heterogeneity by gender, race/ethnicity, age, and primary language. DATA COLLECTION AND EXTRACTION METHODS: Data were extracted from county and program records as of September 2021, totaling 12,866 interventions and 25,761 control enrollments. PRINCIPAL FINDINGS: Approximately 58% of enrollees were female and 41% were under age 35. Enrollees were 23% White, 12% Asian/Pacific Islander, 20% Black/African American, and 36% Hispanic/Latino, and 10% other/unknown. Approximately 35% of the intervention group engaged with their case manager. Approximately 56% of all intervention and control enrollees were vaccinated after 9 months of analysis time. Intervention enrollees had a higher vaccination rate compared to control enrollees (adjusted hazard ratio [aHR]: 1.06; 95% confidence interval [CI]: 1.02-1.10). In sub-analyses, the intervention was associated with stronger likelihood of vaccination among males and individuals under age 35. CONCLUSIONS: Case management infrastructure modestly improved Covid-19 vaccine uptake in a population of Medicaid beneficiaries that over-represents social groups with barriers to early Covid-19 vaccination. Amidst mixed evidence on vaccination-specific incentives, leveraging trusted case managers and existing case management programs may be a valuable prevention strategy.
RESUMEN
Objectives: High-density lipoprotein (HDL) removes cholesterol from cells in atherosclerotic lesions, a function known as cholesterol efflux capacity (CEC). ATP-binding-cassette A1 (ABCA1) membrane transporter starts cholesterol transfer from macrophages to HDL particles. In rheumatoid arthritis (RA), methotrexate and biologic disease modifying drugs (bDMARDs) are atheroprotective whereas corticosteroids and C-reactive protein (CRP) are proatherogenic. We evaluated the influence of these factors on the relationship of ABCA1-CEC with atherosclerosis and cardiovascular events. Methods: Atherosclerosis was evaluated with computed tomography angiography in 140 patients with RA and repeated in 99 after 6.9 ± 0.3 years. Events including acute coronary syndromes, stroke, cardiovascular death, claudication, revascularization, and heart failure were recorded. ABCA1-CEC was quantified in J774A.1 murine macrophages and reported as percentage of effluxed over intracellular cholesterol. Results: Higher ABCA1-CEC associated with (i) more calcified plaques at baseline only in patients with CRP>7 mg/L (median) (p-interaction = 0.001) and methotrexate nonusers (p-interaction = 0.037), and more partially-calcified plaques only in bDMARD nonusers (p-interaction = 0.029); (ii) fewer new calcified plaques in patients with below-median but not higher time-averaged CRP (p-interaction = 0.028); (iii) fewer new total and calcified plaques in prednisone unexposed but not patients exposed to prednisone during follow-up (p-interaction = 0.034 and 0.004) and (iv) more new plaques in baseline bDMARD nonusers and fewer in bDMARD users (p-interaction ≤ 0.001). Also, ABCA1-CEC associated with greater cardiovascular risk only in baseline prednisone users (p-interaction = 0.027). Conclusion: ABCA1-CEC associated with decreased atherosclerosis in patients with below-median baseline and time-averaged CRP and bDMARD use. Conversely, ABCA1-CEC associated with increased plaque in those with higher CRP, corticosteroid users, methotrexate nonusers, and bDMARD nonusers. While in well-treated and controlled disease ABCA1-CEC appears atheroprotective, in uncontrolled RA its action may be masked or fail to counteract the inflammation-driven proatherogenic state.
RESUMEN
Objectives: Cholesterol efflux capacity (CEC) is the main antiatherogenic function of high-density lipoprotein (HDL). ATP-binding-cassette A1 (ABCA1) membrane transporter initiates cholesterol export from arterial macrophages to pre-ß HDL particles fostering their maturation; in turn, those accept cholesterol through ABCG1-mediated export. Impaired pre-ß HDL maturation may disrupt the collaborative function of the two transporters and adversely affect atherosclerosis. Statins exert atheroprotective functions systemically and locally on plaque. We here evaluated associations between ABCA1-CEC, coronary atherosclerosis and cardiovascular risk and the influence of statins on those relationships in rheumatoid arthritis (RA). Methods: Evaluation with computed tomography angiography was undertaken in 140 patients and repeated in 99 after 6.9 ± 0.3 years. Events comprising cardiovascular death, acute coronary syndromes, stroke, claudication, revascularization and heart failure were recorded. ABCA1-CEC and ABCG1-CEC were evaluated in J774A.1 macrophages and Chinese hamster ovary (CHO) cells respectively and expressed as percentage of effluxed over total intracellular cholesterol. Covariates in all cardiovascular event risk and plaque outcome models included atherosclerotic cardiovascular disease (ASCVD) risk score and high-density lipoprotein cholesterol. Results: ABCA1-CEC negatively correlated with ABCG1-CEC (r = -0.167, p = 0.049). ABCA1-CEC associated with cardiovascular risk (adjusted hazard ratio 2.05 [95%CI 1.20-3.48] per standard deviation [SD] increment). There was an interaction of ABCA1-CEC with time-varying statin use (p = 0.038) such that current statin use inversely associated with risk only in patients with ABCA1-CEC below the upper tertile. ABCA1-CEC had no main effect on plaque or plaque progression; instead, ABCA1-CEC (per SD) associated with fewer baseline total plaques (adjusted rate ratio [aRR] 0.81, [95%CI 0.65-1.00]), noncalcified plaques (aRR 0.78 [95%CI 0.61-0.98]), and vulnerable low-attenuation plaques (aRR 0.41 [95%CI 0.23-0.74]) in statin users, and more low-attenuation plaques (aRR 1.91 [95%CI 1.18-3.08]) in nonusers (p-for-interaction = 0.018, 0.011, 0.025 and < 0.001 respectively). Moreover, ABCA1-CEC (per SD) associated with greater partially/fully-calcified plaque progression (adjusted odds ratio 3.07 [95%CI 1.20-7.86]) only in patients not exposed to statins during follow-up (p-for-interaction = 0.009). Conclusion: In patients with RA, higher ABCA1-CEC may reflect a proatherogenic state, associated with enhanced cardiovascular risk. Statin use may unmask the protective impact of ABCA1-mediated cholesterol efflux on plaque formation, progression and cardiovascular risk.
RESUMEN
The current study examined the effects of specific COVID-19 stressors (i.e., family member's death due to COVID-19, COVID-19 infection, and school/financial stressors) on stress, anxiety, and depression and the potential buffering roles of resilience and perceived social support in the association between COVID-19 stressors and psychological symptoms in a Hispanic university student sample (n = 664). Participants were classified in three stressor groups: those reporting a family member's death due to COVID-19 (15.7%), those reporting their own or a family member's COVID-19 infection but no COVID-19 death (35.5%), and those reporting only school and/or financial stressors due to the pandemic (48.8%). Participants completed self-report measures online. Over 50% of participants with a COVID-19 death or infection in the family reported clinical levels of depression symptoms and over 40% endorsed clinically elevated anxiety symptoms. A series of moderation analyses with multi-categorical predictors found that among relatively highly resilient people, the magnitudes of the impact of COVID-19 infection or death on stress, anxiety, and depression were similar to the effect of a financial/school stressor alone, suggesting the buffering role of resilience. Perceived social support did not play a buffering role in the associations. Family member death due to COVID-19 and COVID-19 infection had significant negative psychological impacts on Hispanic young adults. Internal personal resources such as resilience, rather than external personal resources such as perceived social support, appear to be a critical factor that may help protect Hispanic individuals' mental health from the worst stressors of the COVID-19 pandemic.
RESUMEN
Objectives: Metabolic syndrome is associated with the development of chronic kidney disease. Bursera simaruba "chaca" is a medicinal plant used in Mexico for hypertension and empirical therapy. In this study, were examined the effects of ethanol extract of B. simaruba on metabolic syndrome. Materials and Methods: For induction of metabolic syndrome, 20% fructose was used, and it was administered in the water and food to male Wistar rats for 12 weeks, after administering ethanol extract of B. simaruba intragastrically (100 and 200 mg/kg/day) for 6 weeks, blood pressure was determined. In plasma, glucose, cholesterol, triglycerides, angiotensin II, oxide nitric, and angiotensin 1-7 were quantified. In the kidney was performed histological study and the activity of anti-oxidant enzymes was quantified. Results: Rats with metabolic syndrome developed obesity, arterial hypertension, dyslipidemia, and kidney damage characterized by proliferative glomerulonephritis, necrosis, and reduced activity of anti-oxidant enzymes. These alterations were significantly ameliorated by ethanol extract of B. simaruba. Conclusion: The ethanolic extract of B. simaruba showed antidyslipidemic, antihypertensive, anti-oxidant, and renoprotective effects.