RESUMEN
We report the ionothermal carbonization (ITC) of lignocellulosic biomass in imidazolium tetrachloroferrate ionic liquids (ILs) as an advantageous approach for the preparation of nanostructured carbonaceous materials, namely, ionochars. In a previous study, we investigated the role of the imidazolium cation and demonstrated the possibility of controlling both the textural and morphological properties of ionochars by cation engineering. Although essential for providing intermediate Lewis acidity and relatively high thermal stability, the role of the chloroferrate anion is still open to debate. Herein, we investigated the ITC of sugarcane bagasse and its main component, cellulose, in 1-alkyl-3-methylimidazolium ILs with different chloroferrate anions. We identified anionic speciation and its impact on the properties of the IL by Raman spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The obtained ionochars were characterized by gas physisorption, electron microscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and 13C solid-state CP-MAS NMR spectroscopy. We show that the anionic species have a predominant impact on the textural and morphological properties of the ionochars.
RESUMEN
Mesoporous systems are ubiquitous in membrane science and applications due to their high internal surface area and tunable pore size. A new synthesis pathway of hydrolytic ionosilica films with mesopores formed by ionic liquid (IL) templating is proposed and compared with the traditional non-hydrolytic strategy. For both pathways, the multi-scale formation of pores has been studied as a function of IL content, combining the results of thermogravimetric analysis (TGA), nitrogen sorption, and small-angle X-ray scattering (SAXS). The combination of TGA and nitrogen sorption provides access to ionosilica and pore volume fractions, with contributions of meso- and macropores. We then elaborate an original and quantitative geometrical model to analyze the SAXS data based on small spheres (Rs = 1-2 nm) and cylinders (Lcyl = 10-20 nm) with radial polydispersity provided by the nitrogen sorption isotherms. As a result, we found that for a given incorporation of a templating IL, both synthesis pathways produce very similar pore geometries, but the better incorporation efficacy of the new hydrolytic films provides higher mesoporosity. Our combined study provides a coherent view of mesopore geometry, and thereby an optimization pathway of porous ionic membranes in terms of accessible mesoporosity contributing to the specific surface. Possible applications include electrolyte membranes with improved ionic properties, e.g., in fuel cells and batteries, as well as molecular storage.
RESUMEN
Zwitterionic silica coatings for surface functionalization are greatly prominent because of their simple and fast preparation, high availability, and effective antifouling properties. In this work, two zwitterionic sulfobetaine silane coatings, i.e., mono-SBSi and tris-SBSi, were deposited on glass surfaces and tested for antifouling of biological material and biofilm using human cancer cell and seawater, respectively. The used zwitterionic precursors mono-SBSi and tris-SBSi differ by the number of hydrolyzable silane groups: mono-SBSi contains one trimethoxysilane group, whereas tris-SBSi contains three of these functions. First, X-ray photoelectron spectroscopy indicates the successful grafting of zwitterionic coatings onto a glass surface. Characterization using atomic force microscopy shows the different morphologies and roughness of the two coatings. The glass surface became more hydrophilic after the grafting of zwitterionic coatings than the bare glass substrate. The antifouling properties of two coatings were evaluated via human cancer cell adsorption. Interestingly, the tris-SBSi coating displays a significantly lower level of cell adsorption compared to that of both mono-SBSi coating and the non-modified control surface. The same trend was observed for biofilm formation in seawater. Finally, the toxicity of mono-SBSi and tris-SBSi coatings was evaluated on zebrafish embryos, indicating the good biocompatibility of both coatings. Our results indicate interesting antifouling properties of zwitterionic coatings. The chemical constitution of the used precursor has an impact on the antifouling properties of the formed coating: the tris-SBSi-based zwitterionic silica coatings display improved antifouling properties compared to those of the mono-SBSi-based coating. Besides, the use of trisilylated precursors should result in the formation of more resistant and robust coatings due to the higher number of grafting functions. For all these reasons, we anticipate that tris-SBSi coatings will open new perspectives for antifouling applications for biological environments and implants.
RESUMEN
Photodynamic therapy (PDT) and photochemical internalization (PCI) are two methods that use light to provoke cell death or disturbance of cellular membranes, respectively, via excitation of a photosensitizer and the formation of reactive oxygen species (ROS). In this context, two-photon excitation (TPE) is of high interest for PCI and/or PDT due to spatiotemporal resolution of two-photon light and deeper penetration of near-infrared light in biological tissues. Here, we report that Periodic Mesoporous Ionosilica Nanoparticles (PMINPs) containing porphyrin groups allow the complexation of pro-apoptotic siRNA. These nano-objects were incubated with MDA-MB-231 breast cancer cells, and TPE-PDT led to significant cell death. Finally, MDA-MB-231 breast cancer cells were pre-incubated with the nanoparticles and then injected in the pericardial cavity of zebrafish embryos. After 24 h, the xenografts were irradiated with femtosecond pulsed laser and the size monitoring by imaging showed a decrease 24 h after irradiation. Pro-apoptotic siRNA was complexed with the nanoparticles and incubation with MDA-MB-231 cells did not lead to cancer cell death in dark conditions, but with two-photon irradiation, TPE-PCI was observed and a synergic effect between pro-apoptotic siRNA and TPE-PDT was noticed, leading to 90% of cancer cell death. Therefore, PMINPs represent an interesting system for nanomedicine applications.
Asunto(s)
Neoplasias de la Mama , Nanopartículas , Fotoquimioterapia , Animales , Humanos , Femenino , Pez Cebra , ARN Interferente Pequeño/uso terapéutico , Fármacos Fotosensibilizantes/uso terapéutico , Fotoquimioterapia/métodos , Neoplasias de la Mama/tratamiento farmacológico , Silenciador del Gen , Línea Celular TumoralRESUMEN
Biopolymers have significant pharmaceutical applications, and their blending has favorable characteristics for their pharmaceutical properties compared to the sole components. In this work, sodium alginate (SA) as a marine biopolymer was blended with poly(vinyl) alcohol (PVA) to form SA/PVA scaffolds through the freeze-thawing technique. Additionally, polyphenolic compounds in Moringa oleifera leaves were extracted by different solvents, and it was found that extracts with 80% methanol had the highest antioxidant activity. Different concentrations (0.0-2.5%) of this extract were successfully immobilized in SA/PVA scaffolds during preparation. The characterization of the scaffolds was carried out via FT-IR, XRD, TG, and SEM. The pure and Moringa oleifera extract immobilized SA/PVA scaffolds (MOE/SA/PVA) showed high biocompatibility with human fibroblasts. Further, they showed excellent in vitro and in vivo wound healing capacity, with the best effect noted for the scaffold with high extract content (2.5%).
RESUMEN
Periodic Mesoporous Ionosilica Nanoparticles (PMINPs) made via co-condensation reactions starting from an ionosilica precursor and a porphyrin derivative were used for simultaneous BODIPY/siRNA delivery in cancer cells. We observed high BODIPY loading capacities and efficiencies of the PMINPs that are triggered by anion exchange. siRNA adsorption took place on the surface of the nanoparticles, whereas BODIPY was encapsulated within the core of the nanoparticles. BODIPY release was found to be pH-dependent. Our results indicate 94 % BODIPY release after 16â h at pHâ 4, whereas only 2 % were released at pHâ 7.4. Furthermore, complexation with siRNA against luciferase gene was observed at the surface of PMINPs and gene silencing through its delivery via photochemical internalization (PCI) mechanism was efficient in MDA-MB-231 breast cancer cells expressing stable luciferase.
Asunto(s)
Nanopartículas , Fotoquimioterapia , ARN Interferente Pequeño/genética , Luciferasas/genéticaRESUMEN
HYPOTHESIS: The sonochemical exfoliation of graphite in solution has been demonstrated as a promising and easy technique for producing graphene dispersions. This is usually done in organic solvents and leads to unstable dispersions with very low graphene concentration. Ionic liquids (ILs) represent a versatile and safe alternative to traditional organic solvents. A few recent studies reported the use of commercial ILs with bulky anions, such as bis(trifluoromethylsulfonyl)imide, and aromatic cations, such as imidazolium, which favour the exfoliation of graphite through π-π and cation-π interactions. Although recently investigated, the role of aromatic groups on imidazolium cations is still controversial and systematic studies are still necessary. Besides, these studies were limited to liquid dispersions at room temperature. EXPERIMENTS: Herein, we prepared four highly aromatic imidazolium-based ILs, including the newly reported 1-(naphthylmethyl)-3-benzylimidazolium bis(trifluoromethanesulfonyl)imide, [(Np)(Bn)im][NTf2]. These ILs were used for the sonochemical exfoliation of graphite and compared with a commercial benchmark, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][NTf2]. FINDINGS: Interestingly, [(Np)(Bn)im][NTf2] allowed reaching solid dispersions at room temperature containing thin few layer graphene sheets with long-term stability (up to 2 years) and high concentration (3.6 mg/mL). Such graphene dispersion combines long-term stability in the solid-state and high processability in the liquid state, by a simple heating above 60 °C.
RESUMEN
Persistent and emerging organic pollutants represent a serious and global threat to human health and ecosystems. We describe here a simple, efficient and affordable technology for removing such organic pollutants from aquatic systems. Biosorption process was chosen, meeting these three criteria, and so that biosorbents should be biomass wastes combining the following characteristics: natural, cheap and abundant. Powdered dead roots from invasive alien species (Eichhornia crassipes, Pistia stratiotes and Fallopia japonica), and wastes rich in tannins such as coffee grounds and green tea grounds were tested as biosorbents for removing extensively used organic pollutants: organic UV-filters, insecticides and herbicides. The elemental composition and morphology of the biosorbents were fully determined. The biosorption kinetics for each pair of biosorbent/pollutant was described by a pseudo-second order model. Excellent biosorption efficiency was obtained for 10 µM solution of oxybenzone (89 ± 1%), octocrylene (90 ± 2%), lindane (88 ± 0%) and diuron (90 ± 1%) in only 2 h. And total removal of 10 µM of chlordecone (100 ± 0%) could be achieved, which could be of high concern for the population living in chlordecone-contaminated areas. As such pollutants can be found in aquatic ecosystems, an interference study with salts showed that biosorption efficiency remained as efficient in reconstituted seawater. A principal component analysis was performed as an attempt to rationalise the biosorption results. The solubility of the organic pollutants in water and the concentration of tanins in the biosorbents were key parameters.
Asunto(s)
Clordecona , Contaminantes Ambientales , Contaminantes Químicos del Agua , Humanos , Biomasa , Ecosistema , Contaminantes Químicos del Agua/análisis , Contaminantes Ambientales/análisis , Clordecona/análisis , Adsorción , Cinética , Concentración de Iones de HidrógenoRESUMEN
We report herein the dielectric properties response of two ionic chitosan derivatives. More specifically, we report here chitosan derivatives bearing guanidinium groups, prepared through the reaction between chitosan and cyanamide when scandium (III) triflate is present. The anionic counter ions of the guanidinium groups could be changed by working either in acetic acid or hydrochloric acid. In this way, two chitosan derivatives, namely N-guanidinium chitosan acetate (GChAc) and N-guanidinium chitosan chloride (GChCl), were produced. The materials were investigated by 13C solid state NMR, FT-IR spectroscopy, SEM and TEM analysis and compared with the parent chitosan. Dielectric spectroscopy has been used to study the relaxation behavior of the parent chitosan and the new chitosan derivatives over wide ranges of temperature and frequency, indicating that local motion is affected by counter ions. Due to these features, these materials are interesting candidates as high-power electrical materials for green technological applications.
Asunto(s)
Quitosano , Quitosano/química , Cloruros , Cianamida , Guanidina/química , Ácido Clorhídrico , Escandio , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Due to their unique self-assembly properties, ionic liquids (ILs) are versatile soft templates for the formation of mesoporous materials. Here, we report the use of ionic liquids as soft templates for the straightforward formation of mesoporous ionosilica phases. Ionosilicas are highly polyvalent functional materials that are constituted of ionic building blocks that are covalently immobilized within a silica hybrid matrix. Ionosilicas have attracted significant interest in the last few years due to their high potential for applications in water treatment and upgrading, separation and drug delivery. The straightforward and reproducible formation of mesoporous ionosilica phases is therefore highly desirable. In this context, we report the formation of mesoporous ionosilica phases via non-hydrolytic sol-gel procedures in the presence of ionic liquids. Ionic liquids appear as particularly versatile templates for mesoporous ionosilicas due to their high chemical similarity and affinity between ILs and silylated ionic precursors. We therefore studied the textures of the resulting ionosilica phases, after IL elimination, using nitrogen sorption, small angle X-ray scattering (SAXS) and transmission and scanning electron microscopies. All these techniques give concordant results and show that the textures of ionosilica scaffolds in terms of specific surface area, pore size, pore size distribution and connectivity can be efficiently controlled by the nature and the quantity of the ionic liquid that is used in the ionothermal sol-gel procedure.
Asunto(s)
Líquidos Iónicos , Líquidos Iónicos/química , Nitrógeno , Porosidad , Dispersión del Ángulo Pequeño , Dióxido de Silicio/química , Difracción de Rayos XRESUMEN
Activated carbons (ACs) were prepared from dried spent coffee (SCD), a biological waste product, to produce adsorbents for methylene blue (MB) and methyl orange (MO) from aqueous solution. Pre-pyrolysis activation of SCD was achieved via treatment of the SCD with aqueous sodium hydroxide solutions at 90 °C. Pyrolysis of the pretreated SCD at 500 °C for 1 h produced powders with typical characteristics of AC suitable and effective for dye adsorption. As an alternative to the rather harsh base treatment, calcium carbonate powder, a very common and abundant resource, was also studied as an activator. Mixtures of SCD and CaCO3 (1:1 w/w) yielded effective ACs for MO and MB removal upon pyrolysis needing only small amounts of AC to clear the solutions. A selectivity of the adsorption process toward anionic (MO) or cationic (MB) dyes was not observed.
RESUMEN
We report periodic mesoporous ionosilica nanoparticles (PMINPs) as versatile nano-objects for imaging, photodynamic therapy (PDT), and efficient adsorption and delivery of small interfering RNA (siRNA) into breast cancer cells. In order to endow these nanoparticles with PDT and siRNA photochemical internalization (PCI) properties, a porphyrin derivative was integrated into the ionosilica framework. For this purpose, we synthesized PMINPs via hydrolysis-cocondensation procedures from oligosilylated ammonium and porphyrin precursors. The formation of these nano-objects was proved by transmission electron microscopy. The formed nanoparticles were then thoroughly characterized via solid-state NMR, nitrogen sorption, dynamic light scattering, and UV-vis and fluorescence spectroscopies. Our results indicate the formation of highly porous nanorods with a length of 108 ± 9 nm and a width of 54 ± 4 nm. A significant PDT effect of type I mechanism (95 ± 2.8% of cell death) was observed upon green light irradiation in nanoparticle-treated breast cancer cells, while the blue light irradiation caused a significant phototoxic effect in non-treated cells. Furthermore, PMINPs formed stable complexes with siRNA (up to 24 h), which were efficiently internalized into the cells after 4 h of incubation mostly with the energy-dependent endocytosis process. The PCI effect was obvious with green light irradiation and successfully led to 83 ± 1.1% silencing of the luciferase gene in luciferase-expressing breast cancer cells, while no gene silencing effect was observed with blue light irradiation. The present work highlights the high potential of porphyrin-doped PMINPs as multifunctional nanocarriers for nucleic acids, such as siRNA, with a triple ability to perform imaging, PDT, and PCI.
Asunto(s)
Nanopartículas/química , Fotoquimioterapia , Fármacos Fotosensibilizantes/química , ARN Interferente Pequeño/química , Dióxido de Silicio/química , Células Cultivadas , Silenciador del Gen , Células Endoteliales de la Vena Umbilical Humana , Humanos , ARN Interferente Pequeño/genética , ARN Interferente Pequeño/metabolismoRESUMEN
In the last few years, forward osmosis (FO) has attracted increasing interest as a sustainable technique for water desalination and wastewater treatment. However, FO remains as an immature process principally due to the lack of efficient and easily recyclable draw solutes. In this work, we report that ionosilica hydrogels based on quaternary ammonium halide ionosilica are efficient draw solutes in FO. Fluidic ionosilica hydrogels were obtained via hydrolysis-polycondensation reactions of a trisilylated quaternary ammonium precursor in slightly acidic water/ethanol solvent mixtures. The liquid-to-gel transition of the precursor and the kinetics of the formation of hydrogels were monitored by liquid NMR measurements. The formed hydrogels were shown to generate osmotic pressure up to 10.0 atm, indicating the potential of these hydrogels as efficient draw solutes in FO. Our results suggest that iodide anions are the osmotically active species in the system. Regeneration of the hydrogels via ultrafiltration (UF) was successfully achieved, allowing the development of a closed FO-UF process. However, the osmotic performances of the ionosilica hydrogels irreversibly decreased along the successive FO-UF cycles, probably due to anion exchange processes.
Asunto(s)
Hidrogeles/química , Ósmosis/fisiología , Compuestos de Amonio Cuaternario/química , Purificación del Agua/métodos , Aguas Salinas/análisis , Aguas Residuales/análisisRESUMEN
New chitosan derivatives bearing guanidinium functions were synthesized following different synthesis strategies. N-guanidinium chitosan acetate and N-guanidinium chitosan chloride were synthesized by direct reaction between chitosan and cyanamide in the presence of scandium(III) triflate. The synthesis of N-guanidinium chitosan (N,N'-dicyclohexyl) chloride and N-guanidinium chitosan (N-(3-dimethylaminopropyl)-N'-ethyl hydrochloride) chloride involved the reaction of chitosan with carbodiimides in ionic liquid. The chitosan derivatives were characterized by analytical techniques including 13C solid state NMR, FT-IR spectroscopies, thermogravimetry and elemental analysis. The antimicrobial properties of chitosan and the new derivatives were investigated using the minimal inhibitory concentration (MIC) technique. All new guanylated chitosan derivatives displayed high antimicrobial activity in comparison with neat chitosan. The N-guanidinium chitosan acetate reduced the time required for killing to half in comparison with chitosan and recorded MIC values less than 3.125 mg/mL against all assayed microorganisms. This work opens new perspectives for using chitosan derivatives as antimicrobial surfaces.
Asunto(s)
Antiinfecciosos/síntesis química , Quitosano/análogos & derivados , Guanidina/químicaRESUMEN
We report novel materials for calcium phosphate mineralization processes. These materials were synthesized via a three-step procedure starting from chitosan. In a first step, N-guanidinium-chitosan acetate was prepared via a direct guanylation reaction with cyanamide. This intermediate was then used as a cationic polymer substrate for attracting two functional anionic silica precursors, which subsequently allowed accessing new ionic hybrid materials via sol-gel chemistry. These N-guanidinium-chitosan acetate/silica hybrid materials, containing either sulfonate or carboxylate groups, were characterized using solid state 13C NMR, 29Si NMR and FT-IR spectroscopy. Finally, these two ionic hybrids were used as templates for in-vitro biomimetic calcium phosphate mineralization using simulated body fluid solution. We could show that the two ionic hybrids act as versatile templates for biomineralization, inducing the formation of hydroxyapatite, as proved from XRD, SEM, EDX, TEM and TGA. The current results suggest that the new ionic hybrids may be promising candidates for bone tissue engineering applications.
Asunto(s)
Fosfatos de Calcio/síntesis química , Guanidina/síntesis química , Minerales/química , Dióxido de Silicio/síntesis química , Fosfatos de Calcio/química , Espectroscopía de Resonancia Magnética con Carbono-13 , Guanidina/química , Iones , Dióxido de Silicio/química , Espectrometría por Rayos X , Espectroscopía Infrarroja por Transformada de Fourier , Termogravimetría , Difracción de Rayos XRESUMEN
In the present study, tosylcellulose (TC) was used as a key intermediate for the selective coupling with 3-aminopropyltrimethoxysilane (APTMS) affording amino-propylsilane-grafted tosylcellulose (TC-Si). Solid state 13C NMR and FT-IR analyses confirmed the coupling and self-condensation of APTMS along TC. The changes in the surface morphology of the functionalized cellulose were identified by SEM imaging. The thermal stability of TC-Si was significantly improved as compared to MCC and TC. A new organic/inorganic hybrid cellulosic material was fabricated by embedding TiO2 nanoparticles into TC-Si network. The new cellulose polymers were investigated for their ability to promote the proliferation of human skin fibroblast (BJ1). The cell cytotoxicity assay showed that both TC and TC-Si possessed moderate toxicity to BJ1 cells by 17% and 23.8%, respectively at 20 µM. Meanwhile, TC-Si/TiO2 hybrid enhanced the proliferation of BJ1 by 42%. Additionally TC-Si/TiO2 hybrid demonstrated promising antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans.
Asunto(s)
Antiinfecciosos/farmacología , Proliferación Celular/efectos de los fármacos , Celulosa/análogos & derivados , Fibroblastos/efectos de los fármacos , Propilaminas/farmacología , Silanos/farmacología , Titanio/farmacología , Antibacterianos/síntesis química , Antibacterianos/química , Antibacterianos/farmacología , Antibacterianos/toxicidad , Antiinfecciosos/síntesis química , Antiinfecciosos/química , Antiinfecciosos/toxicidad , Antifúngicos/síntesis química , Antifúngicos/química , Antifúngicos/farmacología , Antifúngicos/toxicidad , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/toxicidad , Candida albicans/efectos de los fármacos , Línea Celular , Celulosa/síntesis química , Celulosa/farmacología , Celulosa/toxicidad , Humanos , Nanopartículas/química , Nanopartículas/toxicidad , Porosidad , Propilaminas/química , Propilaminas/toxicidad , Pseudomonas aeruginosa/efectos de los fármacos , Silanos/química , Silanos/toxicidad , Staphylococcus aureus/efectos de los fármacos , Andamios del Tejido/química , Titanio/química , Titanio/toxicidadRESUMEN
The development of new biocompatible, biodegradable functionalized biopolymers that can serve as scaffold for tissue regeneration or work as carriers for different bioactive molecules such as drugs, proteins, and enzymes remains a continuous challenge that need to be extensively explored. For this purpose, three water-soluble cellulose derivatives; namely 4(celluloseamino) butyric acid (CABA) 2(celluloseamino) succinic acid (CASA), and 3(celluloseamino) propane sulfonic acids (CAPSA) were synthesized from microcrystalline cellulose (MCC) via esterification with tosyl chloride that was followed by nucleophilic substitution by the proper aminoalkyl acid derivative. The products were characterized by elemental analyses, FTIR, 13C NMR spectroscopy. The thermal stability, surface morphology, and the elemental composition of the new ampholytic biopolymers were also studied by TGA, EDX-SEM. The new ampholytic cellulose derivatives were evaluated for their in vitro cytotoxicity on normal human retina cell line (RPE1) by MTT assay.
Asunto(s)
Celulosa , Ensayo de Materiales , Retina/metabolismo , Línea Celular , Celulosa/síntesis química , Celulosa/química , Celulosa/farmacología , Esterificación , Humanos , Retina/citologíaRESUMEN
N-guanidinium chitosan acetate, a new chitosan derivative, was prepared via direct guanylation reaction between chitosan and cyanamide in the presence of scandium (III) triflate. Treatment of N-guanidinium chitosan acetate with 3-(trihydroxysilyl)-1-propanesulphonic acid followed by sol-gel reaction allowed accessing N-guanidinium chitosan silica hybrid material. The new ionic microhybrid was characterized using 13C and 29Si solid state NMR, IR spectroscopy, scanning electron microscopy and thermogravimetry. Further studies in the area of separation indicated very high adsorption capacity for cationic dyes such as methylene blue (MB), with capacities up to 935â¯mg/g. The adsorption kinetics can accurately be described by pseudo second-order model. Equilibrium adsorption data showed a better fit with Langmuir adsorption isotherm model. Recycling test showed that the ionic microhybrid can be reused in at least five adsorption-desorption cycles. These results open new perspectives and possibilities for the design of novel hybrid adsorbents for industrial and environmental applications.
Asunto(s)
Quitosano/química , Colorantes/química , Guanidina/química , Aguas Residuales/química , Adsorción , Compuestos Azo/química , Colorantes/aislamiento & purificación , Líquidos Iónicos/química , Iones/química , Dióxido de Silicio/química , Termogravimetría , Contaminantes Químicos del Agua/químicaRESUMEN
Biorefinery aims at the conversion of biomass and renewable feedstocks into fuels and platform chemicals, in analogy to conventional oil refinery. In the past years, the scientific community has defined a number of primary building blocks that can be obtained by direct biomass decomposition. However, the large potential of this "renewable chemical space" to contribute to the generation of value added bio-active compounds and materials still remains unexplored. In general, biomass derived building blocks feature a diverse range of chemical functionalities. In order to be integrated into value-added compounds, they require additional functionalization and/or covalent modification thereby generating secondary building blocks. The latter can be thus regarded as functional components of bio-active molecules or materials and represent an expansion of the renewable chemical space. This perspective highlights the most recent developments and opportunities for the synthesis of secondary biomass derived building blocks and their application to the preparation of value added products.
RESUMEN
Periodic mesoporous ionosilica nanoparticles with ammonium walls were synthesized exclusively from a trisilylated ammonium precursor. The nanoparticles display a uniform particle size, together with a high specific surface area and an ordered hexagonal pore architecture. Completely biocompatible in vitro and in vivo, the nanoparticles are efficiently endocytosed by RAW 264.7 macrophages and used as carrier vehicles for anionic drugs. Diclofenac-loaded ionosilica nanoparticles are very efficient in inhibiting lipopolysaccharides-induced inflammation.