Microfluidic Immunoarray for Point-of-Care Detection of Cytokines in COVID-19 Patients.

The "cytokine storm" often induced in COVID-19 patients contributes to the onset of "acute respiratory distress syndrome" (ARDS) accompanied by lung infection and damage, multiorgan failure, and even death. This large increase in pro-inflammatory cytokines in blood may be related to severity. Rapid, on-demand cytokine analyses can thus be critical to inform treatment plans and improve survival rates. Here, we report a sensitive, low-cost, semiautomated 3D-printed microfluidic immunoarray to detect 2 cytokines and CRP simultaneously in a single 10 µL serum sample in 25 min. Accuracy was validated by analyzing 80 COVID-19 patient serum samples, with results well correlated to a commercial Meso Scale protein immunoassay. Capture antibodies immobilized in detection microwells in a flat well plate-type flow chamber facilitate the immunoassay, with a programmable syringe pump automatically delivering reagents. Chemiluminescence signals were captured in a dark box with a CCD camera integrated for 30 s. This system was optimized to detect inflammation biomarkers IL-6, IFN-γ, and CRP simultaneously in blood serum. Ultralow limits of detection (LODs) of 0.79 fg/mL for IL-6, 4.2 fg/mL for CRP, and 2.7 fg/mL for IFN-γ with dynamic ranges of up to 100 pg/mL were achieved. ROC statistical analyses showed a relatively good diagnostic value related to the samples assigned WHO COVID-19 scores for disease severity, with the best results for IL-6 and CRP. Monitoring these biomarkers for coronavirus severity may allow prediction of disease severity as a basis for critical treatment decisions and better survival rates.

Design and Fabrication of a 3D-Printed Microfluidic Immunoarray for Ultrasensitive Multiplexed Protein Detection.

Microfluidic technology has revolutionized device fabrication by merging principles of fluid dynamics with technologies from chemistry, physics, biology, material science, and microelectronics. Microfluidic systems manipulate small volumes of fluids to perform automated tasks with applications ranging from chemical syntheses to biomedical diagnostics. The advent of low-cost 3D printers has revolutionized the development of microfluidic systems. For measuring molecules, 3D printing offers cost-effective, time, and ease-of-designing benefits. In this paper, we present a comprehensive tutorial for design, optimization, and validation for creating a 3D-printed microfluidic immunoarray for ultrasensitive detection of multiple protein biomarkers. The target is the development of a point of care array to determine five protein biomarkers for aggressive cancers. The design phase involves defining dimensions of microchannels, reagent chambers, detection wells, and optimizing parameters and detection methods. In this study, the physical design of the array underwent multiple iterations to optimize key features, such as developing open detection wells for uniform signal distribution and a flap for covering wells during the assay. Then, full signal optimization for sensitivity and limit of detection (LOD) was performed, and calibration plots were generated to assess linear dynamic ranges and LODs. Varying characteristics among biomarkers highlighted the need for tailored assay conditions. Spike-recovery studies confirmed the assay's accuracy. Overall, this paper showcases the methodology, rigor, and innovation involved in designing a 3D-printed microfluidic immunoarray. Optimized parameters, calibration equations, and sensitivity and accuracy data contribute valuable metrics for future applications in biomarker analyses.

COVID-19 Detection Using a 3D-Printed Micropipette Tip and a Smartphone.

The COVID-19 pandemic has caused over 7 million deaths worldwide and over 1 million deaths in the US as of October 15, 2022. Virus testing lags behind the level or availability necessary for pandemic events like COVID-19, especially in resource-limited settings. Here, we report a low cost, mix-and-read COVID-19 assay using a synthetic SARS-CoV-2 sensor, imaged and processed using a smartphone. The assay was optimized for saliva and employs 3D-printed micropipette tips with a layer of monoclonal anti-SARS-CoV-2 inside the tip. A polymeric sensor for SARS-CoV-2 spike (S) protein (COVRs) synthesized as a thin film on silica nanoparticles provides 3,3',5-5'-tetramethylbenzidine responsive color detection using streptavidin-poly-horseradish peroxidase (ST-poly-HRP) with 400 HRP labels per molecule. COVRs were engineered with an NHS-PEG4-biotin coating to reduce nonspecific binding and provide affinity for ST-poly-HRP labels. COVRs binds to S-proteins with binding strengths and capacities much larger than salivary proteins in 10% artificial saliva-0.01%-Triton X-100 (as virus deactivator). A limit of detection (LOD) of 200 TCID50/mL (TCID50 = tissue culture infectious dose 50%) in artificial saliva was obtained using the Color Grab smartphone app and verified using ImageJ. Viral load values obtained in 10% pooled human saliva spiked with inactivated SARS-COV-2 virus gave excellent correlation with viral loads obtained from qPCR (p = 0.0003, r = 0.99).

Magnetic Nanoparticles with Surface Nanopockets for Highly Selective Antibody Isolation.

Monoclonal antibodies (mAbs) are key components of revolutionary disease immunotherapies and are also essential for medical diagnostics and imaging. The impact of cost is illustrated by a price >$200,000 per year per patient for mAb-based cancer therapy. Purification represents a major issue in the final cost of these immunotherapy drugs. Protein A (PrA) resins are widely used to purify antibodies, but resin cost, separation efficiency, reuse, and stability are major issues. This paper explores a synthesis strategy for low-cost, reusable, stable PrA-like nanopockets on core-shell silica-coated magnetic nanoparticles (NPs) for IgG antibody isolation. Mouse IgG2a, a strong PrA binder, was used as a template protein, first attaching it stem-down onto the NP surface. The stem-down orientation of IgG2a on the NP surface before polymerization is critical for designing the films to bind IgGs. Following this, 1-tetraethoxysilane and four organosilane monomers with functional groups capable of mimicking binding interactions of proteins with IgG antibody stems were reacted to form a thin polymer coating on the NPs. After blocking nonspecific binding sites, removal of the mouse IgG2a provided nanopockets on the core-shell NPs that showed binding characteristics for antibodies remarkably similar to PrA. Both smooth and rough core-shell NPs were used, with the latter providing much larger binding capacities for IgGs, with an excellent selectivity slightly better than that of commercial PrA magnetic beads. This paper is the first report of IgG-binding NPs that mimic PrA selectivity. These nanopocket NPs can be used for at least 15 regeneration cycles, and cost/use was 57-fold less than a high-quality commercial PrA resin.