Crystallinity swayed phase transformation and oxygen vacancy formation in TiO2 aerogel photocatalysts.

The lack of crystallinity of the aerogel materials has limited their significance which otherwise have found huge potential in wide variety of applications. In current work, we have developed TiO2 aerogels by solid-state gelation method using commercially available P25 and ST-01 (commercial Ishihara TiO2 Powder). The lack of crystallinity in the aerogel framework was resolved via utilizing crystalline TiO2 nanoparticles and the phase transformation was assessed as a function of phase composition. Via controlled solid-state gelation, surface area retention of 88.7% was achieved whereas the rutile-to-anatase weight fraction (WR) was considerably enhanced to 0.50. Interestingly, the phase transformation occurred only in P25, which suggests the mixed phase (anatase + rutile) composition as prerequisite for successful phase transformation. Favorably, TiO2 aerogels imbibe high degree of oxygen vacancies (Vo) responsible for photocatalytic applications. Interestingly, Vo induction is higher for the TiO2 with anatase phase composition (ST-01) followed by the sample with mixed phase composition (P25). The developed TiO2 aerogel photocatalysts were employed to dye degradation of Rhodamine B (RhB) and Methylene Blue (MB). The samples attained 94.8% and 96.8% degradation efficiency within 15 min for RhB and MB with nearly 2-fold improvement in the photocatalytic efficiency compared to parent P25 TiO2 respectively.

Evaluation of Glottic View and Intubation Conditions with Sniffing Position Using Three Different Pillow Heights during Direct Laryngoscopy: A Prospective Analytical Study.

Background: Limited studies are available for assessing the optimal pillow height for sniffing position to obtain the best glottic view during laryngoscopy and intubation in the Indian population. Aims: This study was designed to evaluate laryngoscopic view and intubation conditions in sniffing position using three different pillow heights (without a pillow, 4 cm, and 7 cm) during direct laryngoscopy. Settings and Design: This prospective analytical study was done in a tertiary care teaching institute. Materials and Methods: In 60 patients, direct laryngoscopy was performed in the sniffing position first without a pillow (0 cm), followed by a 4-cm pillow, and then a 7-cm pillow to assess the glottic view after administration of anesthesia. The laryngoscopic views were graded using the percentage of glottic opening (POGO) score and Cormack and Lehane (CL) grade. The pillow with the best laryngoscopic view was subsequently used to intubate the patient. Intubation difficulty was assessed by the Intubation Difficulty Score (IDS). The patient was followed up for 24 h postoperatively to evaluate postoperative complications due to intubation. Statistical Analysis: The categorical data were expressed in frequency and percentages and analyzed using the Chi-square test. Results: With a 4-cm pillow, there are a lower CL grade and a higher POGO score compared to views without a pillow and a 7-cm pillow which was statistically significant. There is a significantly lesser IDS score with a 4-cm pillow. Conclusions: The sniffing position with a 4-cm pillow provides a better laryngoscopic view and improved intubation condition than without a pillow and a 7-cm pillow in the study population.

Regional anaesthesia practices in India: A nationwide survey.

BACKGROUND AND AIMS: There are no surveys documenting the existing regional anaesthesia (RA) practices in our country. This nationwide survey aims to record the existing RA practices, identify any lacunae that might exist and project the future direction of evolution. METHODS: This online survey consisting of 31 questions was sent to all members of the Indian Society of Anaesthesiologists and addressed participants' demographic features, central neuraxial block and peripheral nerve block practices, drug selection, RA training and safety measures. The data were analysed using Statistical Package for the Social Sciences version 24.0. All categorical variables were expressed as frequencies and percentages. RESULTS: A total of 2141 responses were received, with participants distributed across the country. Forty-two per cent of the respondents reported that more than 60% of surgeries were performed under RA. Most of the participants use 'traditional' test dose for epidural space confirmation. Fifty participants (2.4%) use ultrasound for neuraxial space identification. Twenty per cent of the participants use a checklist for monitoring post-operative epidural analgesia. 6.7% have undergone specialised training in RA. Around 3.5% of the respondents have performed a wrong-side block. 31.4% of the respondents store intralipid in the operating room. CONCLUSION: The current survey highlights the prevailing practices, various deficiencies in monitoring and the need for RA training programmes. The data accrued can serve as a baseline for future comparison.

Encapsulation of Phase-Changing Eutectic Salts in Magnesium Oxide Fibers for High-Temperature Carbon Dioxide Capture: Beyond the Capacity-Stability Tradeoff.

Eutectic mixture (EM)-promoted MgO sorbents exhibit high CO2 sorption capacities but  experience a significant decrease in uptake after multiple sorption-regeneration cycles due to EM movement and redistribution at high temperatures. Encapsulation of a pseudoliquid, phase-changing EM promoter with MgO may thus prevent the loss of active interface by confining the EM within a fixed area inside a MgO shell. In this work, we successfully embedded an EM composed of KNO3 and LiNO3 in a MgO fiber matrix via core-shell electrospinning. The synthesized sorbent achieved relatively high and steady sorption capacities, maintaining a stable uptake of ∼20 wt % after 25 sorption-regeneration cycles. The sorbent was also characterized using various techniques including in situ transmission electron microscopy (TEM) to describe its morphology, from which it was confirmed that the eutectic salt existed in distributed hollow pockets within the MgO fiber matrix and stayed confined within these fixed areas, favorably limiting its movement and redistribution when exposed to high temperatures where it exists in the liquid form. The EM may also be described as a glue that holds the fiber together, while MgO acts as a protective shell that prevents structural changes and rearrangement caused by EM movement, allowing the sorbent to retain its cyclic stability after multiple cycles and demonstrating its potential for industrial use after further improvement. Thus, the microencapsulation of a phase-changing EM material with pure MgO metal oxide was successfully achieved and might be explored for various material applications.

Mg-Ion Inversion in MgO@MgO-Al2 O3 Oxides: The Origin of Basic Sites.

Although MgO-Al2 O3 is well known as having a spinel structure, the inversion of which occurs by exchange of the trivalent (Al3+ ) and divalent (Mg2+ ) cations, little analytical study of the degree of inversion has been carried out. This study concerns a simple methodology to identify the inversion by solid-state NMR spectroscopy, whereby its correlation with the CO2 capture capacity of MgO-rich MgO@MgO-Al2 O3 spinel structures is verified. Through 27 Al and 25 Mg NMR spectroscopy, temperature-programmed CO2 desorption, and thermogravimetric analysis, higher inversion is found to occur at low Mg/Al ratios and the inversion is found to decrease as the Mg/Al ratio increases. Moreover, the degree of inversion correlates with CO2 sorption, which is associated with the medium-strength basic sites induced by formation of the unsaturated O2- species. These results will open new pathways to exploit defects in complex oxides beyond spinels and their derivatives for desired applications. This demonstration of MgO-Al2 O3 for CO2 sorption can contribute to the design of future CO2 sorbents.

Eutectic mixture promoted CO2 sorption on MgO-TiO2 composite at elevated temperature.

The development of carbon dioxide (CO2) sorbents that can operate at elevated temperatures is significant for the advancement of pre-combustion capture technologies. Recently, promoter-based systems composed of alkali/alkaline earth metal nitrates and/or carbonates have been considered as next-generation solid sorbents due to their improved CO2 uptake and kinetics. However, obtaining stable MgO sorbents against temperature swing regeneration still remained challenging. Herein, we report MgO-TiO2 solid sorbents promoted by eutectic mixture (KNO3 and LiNO3) for elevated temperature CO2 sorption. The developed sorbents show improved CO2 sorption capacity, which may be attributed to the alternative CO2 sorption pathway provided by the ionization of highly dispersed MgO in the eutectic mixture. The MgO-TiO2 framework was also shown to assist in retaining the MgO configuration by constraining its interaction with CO2. Furthermore, it is demonstrated that constructing composite structures is essential to improve the CO2 sorption characteristics, mainly recyclability, at elevated temperatures. The developed promoter integrated sorbents showed exceptionally high CO2 sorption capacity of >30wt.% at an elevated temperature (300°C) with pronounced stability under temperature swing operation.

Stabilization of NaNO3-Promoted Magnesium Oxide for High-Temperature CO2 Capture.

NaNO3-promoted MgO sorbents are known to achieve enhanced CO2 sorption uptake but fail to maintain their capacity after multiple sorption-regeneration cycles. In this study, commercially available hydrotalcites (Pural Mg30, Pural Mg70, and synthetic hydrotalcite) were used as stabilizers for NaNO3-impregnated MgO (MgONaNO3) sorbents to improve their cyclic stability. Results show that the Mg30-stabilized MgONaNO3 attained higher and stable overall CO2 sorption performance as compared to bare MgONaNO3 after multiple sorption cycles. XRD analyses reveal that the hydrotalcites act as templates for MgCO3 by restricting the formation of large and nonuniform product crystallites. Furthermore, CO2-TPD results show that the hydrotalcites cause a change in the basic sites of the sorbent, which may be attributed to its high interaction with both MgO and NaNO3. This interaction becomes stronger as cycles proceed due to the structural rearrangements occurring, thus contributing to the stable behavior of the sorbents. However, these characteristics were not found on MgONaNO3 and the α-Al2O3-stabilized samples, thus proving the unique ability of hydrotalcites. From these results, we then derived the formation scheme of MgCO3 on the hydrotalcite-stabilized sorbents. This study presents a simple yet effective method of improving the stability of molten salt-promoted sorbents with promising potential for industrial use.

Diamine-Functionalization of a Metal-Organic Framework Adsorbent for Superb Carbon Dioxide Adsorption and Desorption Properties.

For real-world postcombustion applications in the mitigation of CO2 emissions using dry sorbents, adsorption and desorption behaviors should be controlled to design and fabricate prospective materials with optimal CO2 performances. Herein, we prepared diamine-functionalized Mg2 (dobpdc) (H4 dobpdc=4,4'-dihydroxy-(1,1'-biphenyl)-3,3'-dicarboxylic acid). (1-diamine) with ethylenediamine (en), primary-secondary (N-ethylethylenediamine-een and N-isopropylethylenediamine-ipen), primary-tertiary, and secondary-secondary diamines. A slight alteration of the number of alkyl substituents on the diamines and their alkyl chain length dictates the desorption temperature (Tdes ) at 100 % CO2 , desorption characteristics, and ΔT systematically to result in the tuning of the working capacity. The existence of bulky substituents on the diamines improves the framework stability upon exposure to O2 , SO2 , and water vapor, relevant to real flue-gas conditions. Bulky substituents are also responsible for an interesting two-step behavior observed for the ipen case, as revealed by DFT calculations. Among the diamine-appended metal-organic frameworks, 1-een, which has the required adsorption and desorption properties, is a promising material for sorbent-based CO2 capture processes. Hence, CO2 performance and framework durability can be tailored by the judicial selection of the diamine structure, which enables property design at will and facilitates the development of desirable CO2 -capture materials.

Evaluation of different fibers and biodentine as alternates to crown coverage for endodontically treated molars: An in vitro study.

OBJECTIVE: The objective of this study is to evaluate the fracture resistance of newer restorative materials that could serve as an alternate to crown coverage. MATERIALS AND METHODS: Forty extracted human mandibular molar teeth were selected for this study and were divided into four groups (n = 10). All the teeth in the experimental groups (Group 2-4) were subjected to access cavity preparation with roughly 1.5 mm of tooth structure remaining throughout the circumference. Group 1: Intact teeth used as control. Group 2: Access cavities reinforced with biodentine. Group 3: Inner circumference of access cavities reinforced with polyethylene fiber and nano-hybrid composite. Group 4: Access cavities were reinforced with fiber reinforced composite. All the teeth were subjected to fracture resistance using universal testing machine. RESULTS: The results of the study were evaluated statistically using one-way ANOVA and Tukey post hoc test. Group 2 demonstrated the least mean values of fracture resistance and was significantly different from the control and other experimental groups. Statistically significant difference among Groups 1, 3, and 4 was not found. CONCLUSION: Within the limitation of this in vitro study, it can be concluded that fiber reinforced composite and polyethylene fibers with nanohybrid composite could serve as an alternate to crown coverage.

Mesoporous magnesium oxide nanoparticles derived via complexation-combustion for enhanced performance in carbon dioxide capture.

Magnesium oxide (MgO) is a promising candidate for carbon dioxide (CO2) capture at high temperature applicable to pre-combustion capture in an integrated gasification combined cycle (IGCC) scheme. In this work, mesoporous MgO nanoparticles were synthesized via simple complexation-combustion method by using glycine (G) and urea (U) as fuels (F). The obtained sorbents were thoroughly characterized in terms of the crystalline structure, morphology, nature of the fuel, F/O ratio, and their consequent effects on CO2 sorption. It was observed that due to the complexation followed by combustion in the presence of glycine, MgO with crystallite size as small as∼8nm could be derived. The synthesized MgO nanoparticles exhibited exceptionally high CO2 sorption at elevated temperatures. Furthermore, CO2 sorption isotherms in assistance with FT-IR and DSC experiments demonstrated that the low CO2 uptake at ambient temperature (25-100°C) may be due to the formation of monodentate carbonates, whereas predominant bicarbonates enhance the CO2 uptake at elevated temperatures (100-300°C). MgO-1.5(G) obtained the highest sorption corresponding to 1.34mmol/g at 200°C.

Fine-Tuning of the Carbon Dioxide Capture Capability of Diamine-Grafted Metal-Organic Framework Adsorbents Through Amine Functionalization.

A combined sonication and microwave irradiation procedure provides the most effective functionalization of ethylenediamine (en) and branched primary diamines of 1-methylethylenediamine (men) and 1,1-dimethylethylenediamine (den) onto the open metal sites of Mg2 (dobpdc) (1). The CO2 capacities of the advanced adsorbents 1-en and 1-men under simulated flue gas conditions are 19 wt % and 17.4 wt %, respectively, which are the highest values reported among amine-functionalized metal-organic frameworks (MOFs) to date. Moreover, 1-den exhibits both a significant working capacity (12.2 wt %) and superb CO2 uptake (11 wt %) at 3 % CO2 . Additionally, this framework showcases the superior recyclability; ultrahigh stability after exposure to O2 , moisture, and SO2 ; and exceptional CO2 adsorption capacity under humid conditions, which are unprecedented among MOFs. We also elucidate that the performance of CO2 adsorption can be controlled by the structure of the diamine ligands grafted such as the number of amine end groups or the presence of side groups, which provides the first systematic and comprehensive demonstration of fine-tuning of CO2 uptake capability using different amines.

Evaluation of proximity of mandibular molars and second premolar to inferior alveolar nerve canal among central Indians: A cone-beam computed tomographic retrospective study.

CONTEXT: A study was done to assess the average distances of root apices of mandibular first molar, second molar, and second premolar to inferior alveolar nerve canal (IANC), among males and females in central India. MATERIALS AND METHODS: High-resolution full-volume cone-beam computed tomography (CBCT) scans were obtained from the radiology database at the Sri Aurobindo College of Dentistry, Indore. After scrutinizing the database, CBCT of 40 males and 40 females that conformed to the inclusion and exclusion criteria were selected for the study. RESULTS: All the data were analyzed using SPSS, Version 16. Descriptive statistics of the variables and measurements are presented using Students t-test (paired and unpaired), and correlation between age was tabled by Karl Pearson's correlation coefficient method. CONCLUSION: For the second premolar, the average distance to the IANC was 0.88-13.03 mm for males and 0.00-5.49 mm for females. The average distance of IANC to the mesial root apex of first molar was 1.46-13.23 mm for males and 0.93-8.03 mm for females. For the second molar, the average distance was 1.31-14.71 mm for males and 0.00-6.91 mm for females (values on left side were shorter as compared to right side). In the overall population, only second molar exhibited significant difference in the distance from root apex to IANC when compared bilaterally. In addition to gender differences, age-related differences were found to be significant for the first molar on left side and second molar on the right side of the population (P< 0.05).

Preparation and Characterization of Electro-Spun Fabricated Ag-TiO2 Composite Nanofibers and Its Enhanced Photo-Catalytic Activity for the Degradation of Congo Red.

Electro-spun fabricated TiO2 nanofibers were prepared by simple electro-spinning method, in subsequent step silver (Ag) was deposited using precipitation method and obtained Ag-TiO2 composite nanofibers. The properties and morphology of these prepared composite nanofibers were characterized by XRD, SEM, EDX, and TGA. The prepared electro-spun composite nanofibers were applied as catalyst for the photodegradation of Congo-red under immited solar light in aqueous solution. Result reveals that, Ag loaded TiO2 composite nanofibers were effectively increased photodegradation of Congo red compared with pure TiO2 nanofibers in analogous condition. As a result, 92.0% decomposition of Congo red was obtained by using 5 wt% of Ag loaded TiO2 composite nanofibers at room temperature in short reaction time using 300 W of solar light. In addition, photodegradation of Congo red was also studied under different experimental conditions such as amount of Ag loaded in TiO2 nanofibers and contact time. Moreover, we also studied sintering effect on TiO2 nanofibers and their consequent effect on photodegradation reaction. After completion of reaction, the nanofibers can be easily separated by filtration process and reused several times without significant loss of activity. Overall study reveals that, Ag-TiO2 composite nanofibers were strongly enhanced the surface activity for the photo catalytic degradation of Congo red under ambient condition.

Synthesis and Characterization of AlCl3 Impregnated Molybdenum Oxide as Heterogeneous Nano-Catalyst for the Friedel-Crafts Acylation Reaction in Ambient Condition.

Aluminum trichloride (AlCl3) impregnated molybdenum oxide heterogeneous nano-catalyst was prepared by using simple impregnation method. The prepared heterogeneous catalyst was characterized by powder X-ray diffraction, FT-IR spectroscopy, solid-state NMR spectroscopy, SEM imaging, and EDX mapping. The catalytic activity of this protocol was evaluated as heterogeneous catalyst for the Friedel-Crafts acylation reaction at room temperature. The impregnated MoO4(AlCl2)2 catalyst showed tremendous catalytic activity in Friedel-Crafts acylation reaction under solvent-free and mild reaction condition. As a result, 84.0% yield of acyl product with 100% consumption of reactants in 18 h reaction time at room temperature was achieved. The effects of different solvents system with MoO4(AlCl2)2 catalyst in acylation reaction was also investigated. By using optimized reaction condition various acylated derivatives were prepared. In addition, the catalyst was separated by simple filtration process after the reaction and reused several times. Therefore, heterogeneous MoO4(AlCl2)2 catalyst was found environmentally benign catalyst, very convenient, high yielding, and clean method for the Friedel-Crafts acylation reaction under solvent-free and ambient reaction condition.

Use of platelet-rich fibrin as an autologous biologic rejuvenating media for avulsed teeth - an in vitro study.

AIM: The prognosis of replanted avulsed tooth depends on the existence of viable cells in the periodontal ligament and also on those cells which are able to proliferate on the damaged areas of the root. The purpose of this study was to evaluate the survival of periodontal ligament cells (PDL) when soaked in an autologous biologic rejuvenating media after an extra-oral dry time of 40 min. METHOD: Thirty teeth were selected with intact crown which were advised for Orthodontic extraction having healthy PDL. They were divided into two experimental and two control groups. The positive and negative controls corresponded to 0-min and 1-h dry time, respectively. The experimental teeth were stored dry for 40 min and then immersed in one of the two media, combination of platelet-rich fibrin and platelet poor plasma (PRF+PPP) and PPP for 45 min. The teeth in each group were treated with dispase II and collagenase for 30 min and later centrifuged for 5 min at 50.17 g. The supernatant was removed with sterile micropipette, the cells labelled with 0.4% trypan blue, and the number of viable PDL cells was counted with a haemocytometer, under a light microscope. RESULTS: anova and Mann-Whitney U-test demonstrated statistically significant differences in the viability of PDL cells among experimental groups. CONCLUSION: Within the parameters of this study, a combination of platelet-rich fibrin and PPP demonstrated higher number of viable PDL cells and hence could be a good biologic rejuvenating media for avulsed teeth.

High temperature carbon dioxide capture on nano-structured MgO-Al2O3 and CaO-Al2O3 adsorbents: an experimental and theoretical study.

Nano-structured alkaline-earth metal oxide adsorbents (denoted as MgO-Al2O3 and CaO-Al2O3) were prepared by an epoxide-driven one-pot sol-gel method, and they were applied to the dynamic and static CO2 adsorption. For comparison, a nano-structured aluminum oxide adsorbent (denoted as Al2O3) was also prepared by a similar method. MgO-Al2O3 adsorbent exhibited a well-developed mesopore structure through the formation of MgAl2O4 spinel phase, whereas CaO-Al2O3 adsorbent was composed of nano-sized CaO and CaAl2O4, resulting in a pore plugging. It was revealed that total basicity increased in the order of Al2O3 (0.11 mmol-CO2/g) < MgO-Al2O3 (0.37 mmol-CO2/g) < CaO-Al2O3, (1.21 mmol-CO2/g), which is in concurrent with adsorption energy obtained from DFT calculations. However, it was found that both basicity and base strength of the adsorbents played an important role in determining the CO2 adsorptive performance at different operating temperature. Among the adsorbents tested, MgO-Al2O3, which mostly retained medium basic sites, exhibited a best CO2 adsorptive performance at 200 degrees C. Furthermore, the experimental results are well supported by theoretical estimation, suggesting a useful design method of adsorbents for facile and regenerative adsorption in the applications of CO2 capture.

Anti-inflammatory effect of vitamin D on gingivitis: a dose response randomised controlled trial.

In a randomized controlled trial, a daily Oral Vitamin D supplementation was given in dose of 2000 IU for Group A, 1000 IU for Group B , 500 IU for Group C and placebo for Group D over 3 months period to assess the anti-inflammatory effect of vitamin D on gingivitis at various doses. The changes in gingival scores were measured at the period of 1 st , 2 nd and 3 rd month. Gingivitis score changed in direct proportion to the dose of vitamin D supplementation. Group A mean gingival scores were 2.4 (baseline); 1.7 (1 st month), 0.8 (2 nd month) and 0.3 (3 rd month). The group B the mean baseline gingival score from 2.3 reduced to 2.0 (month), 1.1 (two months) and 0.5 (third month). Group C had baseline gingival scores of 2.2 and 1.9 (1 st month), 1.4 (2 nd month) and 0.8 (last visit). Comparing baseline gingivitis scores with later visit score by Wilcoxon paired test, the anti-inflammatory effect was significantly seen in group A after one month itself, group B at two months and group C at 3 rd month after oral vitamin D supplementation. However, Group D did not show any significant anti-inflammatory effect.

Anti-inflammatory effect of vitamin D on gingivitis: a dose-response randomised control trial.

PURPOSE: To assess the anti-inflammatory effect of vitamin D on gingivitis at various doses. MATERIALS AND METHODS: In this randomized controlled trial, daily oral vitamin D supplementation was given in doses of 2000 IU for group A, 1000 IU for group B, 500 IU for group C and a placebo for group D over a 3-month period. The changes in gingival scores were measured after the 1st, 2nd and 3rd months. RESULTS: The gingivitis score changed in direct proportion to the dose of vitamin D supplementation. In group A, the mean gingival scores were 2.4 (baseline), 1.7 after the first month, 0.8 after the second month and 0.3 after the third month. The group B mean baseline gingival score of 2.3 decreased to 2.0 in the first month, 1.1 after the second month and 0.5 after the third month. In group C, the baseline gingival scores were 2.2 and 1.9 after one month, 1.4 after two months and 0.8 by the last visit. Comparing baseline gingivitis scores with the later-visit score using the Wilcoxon paired test, the significant anti-inflammatory effect was seen in group A after one month, in group B at two months and in group C at three months after oral vitamin D supplementation (P < 0.0001). However, group D did not show a significant antiinflammatory effect. CONCLUSION: There is a dose-dependent anti-inflammatory effect of vitamin D on gingivitis. Vitamin D is a safe and effective anti-inflammatory agent in doses ranging from 500 IU to 2000 IU. Results are apparent earlier with the higher dose of 2000 IU.