RESUMEN
Mesenchymal stem cells (MSCs) are self-renewing, multipotent cells, which can be used in cellular and tissue therapeutics. MSCs cell number can be expanded in vitro, but premature differentiation results in reduced cell number and compromised therapeutic efficacies. Current techniques fail to discriminate the "stem-like" population from early stages (12 h) of differentiated MSC population. Here, we imaged nuclear structure and actin architecture using immunofluorescence and used deep learning-based computer vision technology to discriminate the early stages (6-12 h) of MSC differentiation. Convolutional neural network models trained by nucleus and actin images have high accuracy in reporting MSC differentiation; nuclear images alone can identify early stages of differentiation. Concurrently, we show that chromatin fluidity and heterochromatin levels or localization change during early MSC differentiation. This study quantifies changes in cell architecture during early MSC differentiation and describes a novel image-based diagnostic tool that could be widely used in MSC culture, expansion and utilization.
Asunto(s)
Diferenciación Celular , Células Madre Mesenquimatosas , Células Madre Mesenquimatosas/metabolismo , Células Madre Mesenquimatosas/citología , Diferenciación Celular/fisiología , Humanos , Núcleo Celular/metabolismo , Actinas/metabolismo , Procesamiento de Imagen Asistido por Computador/métodos , Aprendizaje Profundo , Redes Neurales de la Computación , Células Cultivadas , Cromatina/metabolismoRESUMEN
Despite large theoretical energy densities, metal-sulfide electrodes for energy storage systems face several limitations that impact the practical realization. Here, we present the solution-processable, room temperature (RT) synthesis, local structures, and application of a sulfur-rich Mo3S13 chalcogel as a conversion-based electrode for lithium-sulfide batteries (LiSBs). The structure of the amorphous Mo3S13 chalcogel is derived through operando Raman spectroscopy, synchrotron X-ray pair distribution function (PDF), X-ray absorption near edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) analysis, along with ab initio molecular dynamics (AIMD) simulations. A key feature of the three-dimensional (3D) network is the connection of Mo3S13 units through S-S bonds. Li/Mo3S13 half-cells deliver initial capacity of 1013â mAh g-1 during the first discharge. After the activation cycles, the capacity stabilizes and maintains 312â mAh g-1 at a C/3 rate after 140â cycles, demonstrating sustained performance over subsequent cycling. Such high-capacity and stability are attributed to the high density of (poly)sulfide bonds and the stable Mo-S coordination in Mo3S13 chalcogel. These findings showcase the potential of Mo3S13 chalcogels as metal-sulfide electrode materials for LiSBs.
RESUMEN
Rhenium chalcohalide cluster compounds are a photoluminescent family of mixed-anion chalcohalide cluster materials. Here we report the new material Rb6Re6S8I8, which crystallizes in the cubic space group Fm[Formula: see text]m and contains isolated [Re6S8I6]4- clusters. Rb6Re6S8I8 has a band gap of 2.06(5) eV and an ionization energy of 5.51(3) eV, and exhibits broad photoluminescence (PL) ranging from 1.01 eV to 2.12 eV. The room-temperature PL exhibits a PL quantum yield of 42.7% and a PL lifetime of 77 µs (99 µs at 77 K). Rb6Re6S8I8 is found to be soluble in multiple polar solvents including N,N-dimethylformamide, which enables solution processing of the material into films with thickness under 150 nm. Light-emitting diodes based on films of Rb6Re6S8I8 were fabricated, demonstrating the potential for this family of materials in optoelectronic devices.
RESUMEN
The application of grazing-incidence total X-ray scattering (GITXS) for pair distribution function (PDF) analysis using >50â keV X-rays from synchrotron light sources has created new opportunities for structural characterization of supported thin films with high resolution. Compared with grazing-incidence wide-angle X-ray scattering, which is only useful for highly ordered materials, GITXS/PDFs expand such analysis to largely disordered or nanostructured materials by examining the atomic pair correlations dependent on the direction relative to the surface of the supporting substrate. A characterization of nanocrystalline In2O3-derived thin films is presented here with in-plane-isotropic and out-of-plane-anisotropic orientational ordering of the atomic structure, each synthesized using different techniques. The atomic orientations of such films are known to vary based on the synthetic conditions. Here, an azimuthal orientational analysis of these films using GITXS with a single incident angle is shown to resolve the markedly different orientations of the atomic structures with respect to the planar support and the different degrees of long-range order, and hence, the terminal surface chemistries. It is anticipated that orientational analysis of GITXS/PDF data will offer opportunities to extend structural analyses of thin films by providing a means to qualitatively determine the major atomic orientation within nanocrystalline and, eventually, non-crystalline films.
RESUMEN
Understanding and tailoring the physical behaviour of halide perovskites under practical environments is critical for designing efficient and durable optoelectronic devices. Here, we report that continuous light illumination leads to >1% contraction in the out-of-plane direction in two-dimensional hybrid perovskites, which is reversible and strongly dependent on the specific superlattice packing. X-ray photoelectron spectroscopy measurements show that constant light illumination results in the accumulation of positive charges in the terminal iodine atoms, thereby enhancing the bonding character of inter-slab I-I interactions across the organic barrier and activating out-of-plane contraction. Correlated charge transport, structural and photovoltaic measurements confirm that the onset of the light-induced contraction is synchronized to a threefold increase in carrier mobility and conductivity, which is consistent with an increase in the electronic band dispersion predicted by first-principles calculations. Flux-dependent space-charge-limited current measurement reveals that light-induced interlayer contraction activates interlayer charge transport. The enhanced charge transport boosts the photovoltaic efficiency of two-dimensional perovskite solar cells up to 18.3% by increasing the device's fill factor and open-circuit voltage.
RESUMEN
Metal halide perovskites possess unique atomic and electronic configurations that endow them with high defect tolerance and enable high-performance photovoltaics and optoelectronics. Perovskite light-emitting diodes have achieved an external quantum efficiency of over 20%. Despite tremendous progress, fundamental questions remain, such as how structural distortion affects the optical properties. Addressing their relationships is considerably challenging due to the scarcity of effective diagnostic tools during structural and property tuning as well as the limited tunability achievable by conventional methods. Here, using pressure and chemical methods to regulate the metal off-centering distortion, we demonstrate the giant tunability of photoluminescence (PL) in both the intensity (>20 times) and wavelength (>180 nm/GPa) in the highly distorted halide perovskites [CH3NH3GeI3, HC(NH2)2GeI3, and CsGeI3]. Using advanced in situ high-pressure probes and first-principles calculations, we quantitatively reveal a universal relationship whereby regulating the level of off-centering distortion towards 0.2 leads to the best PL performance in the halide perovskites. By applying this principle, intense PL can still be induced by substituting CH3NH3 + with Cs+ to control the distortion in (CH3NH3)1-xCsxGeI3, where the chemical substitution plays a similar role as external pressure. The compression of a fully substituted sample of CsGeI3 further tunes the distortion to the optimal value at 0.7 GPa, which maximizes the emission with a 10-fold enhancement. This work not only demonstrates a quantitative relationship between structural distortion and PL property of the halide perovskites but also illustrates the use of knowledge gained from high-pressure research to achieve the desired properties by ambient methods.
RESUMEN
2D perovskites are a class of halide perovskites offering a pathway for realizing efficient and durable optoelectronic devices. However, the broad chemical phase space and lack of understanding of film formation have led to quasi-2D perovskite films with polydispersity in perovskite layer thicknesses, which have hindered device performance and stability. Here, a simple and scalable approach is reported, termed as the "phase-selective method", to fabricate 2D perovskite thin films with homogenous layer thickness (phase purity). The phase-selective method involves the dissolution of single-crystalline powders with a homogeneous perovskite layer thickness in desired solvents to fabricate thin films. In situ characterizations reveal the presence of sub-micrometer-sized seeds in solution that preserve the memory of the dissolved single crystals and dictate the nucleation and growth of grains with an identical thickness of the perovskite layers in thin films. Photovoltaic devices with a p-i-n architecture are fabricated with such films, which yield an efficiency of 17.1% enabled by an open-circuit voltage of 1.20 V, while preserving 97.5% of their peak performance after 800 h under illumination without any external thermal management.
RESUMEN
PURPOSE: To determine whether brain atrophy was present in patients with anti-N-methyl-d-aspartate receptor encephalitis (anti-NMDARE) using qualitative and quantitative analyses of brain magnetic resonance imaging (MRI) and to explore clinical differences in patients with anti-NMDARE with or without brain atrophy. METHODS: A retrospective observational study encompassing the serologic, cerebrospinal fluid, and brain MRI data of 23 patients with anti-NMDARE was conducted. Median patient age was 14 years (interquartile range [IQR], 12 years). The cohort included 15 children (<18 years old) and 8 adults (≥18 years old). There were 6 male and 17 female patients. Imaging analysis involved 2 expert readers' observations of MRIs and automated volumetric quantification using NeuroQuant (CorTechs Labs, Inc.) software. RESULTS: Of 23 pediatric and adult patients, 11 patients had 14 brain MRIs that were quantitatively analyzed. Quantitative NeuroQuant volumetric analysis showed atrophy in 9 of 14 MRIs for 7 of 11 patients compared to age-controlled normative data. In these 9 MRIs, atrophy was present in the temporal lobes (n = 9), cerebral cortex (n = 3), and cerebellum (n = 3). Qualitative analysis of 59 MRIs (23 patients) revealed volume loss in 6 patients: 5 with global cerebral and temporal lobe volume loss and 1 with temporal lobe volume loss. No patient showed cerebellar volume loss on qualitative analysis. Mean length of stay in the intensive care unit was not significantly different for patients with or without quantitative volume loss (3.5 [5.2] vs 27.4 [23.4] days; p = 0.08). CONCLUSIONS: In this cohort of patients with anti-NMDARE, quantitative volumetric analysis showed brain atrophy, particularly affecting the temporal lobes, in 64% (7/11) of the patients. Qualitative analysis showed brain atrophy in 26% (6/23). These findings highlight the increased sensitivity of quantitative methods for volume loss detection. Larger studies are needed.
Asunto(s)
Encefalitis Antirreceptor N-Metil-D-Aspartato , Adolescente , Adulto , Encefalitis Antirreceptor N-Metil-D-Aspartato/patología , Atrofia/patología , Encéfalo/diagnóstico por imagen , Encéfalo/patología , Niño , Femenino , Humanos , Imagen por Resonancia Magnética , Masculino , NeuroimagenRESUMEN
Two-dimensional (2D) semiconductors are attractive candidates for a variety of optoelectronic applications owing to the unique electronic properties that arise from quantum confinement along a single dimension. Incorporating nonradiative mechanisms that enable directed migration of bound charge carriers, such as Förster resonance energy transfer (FRET), could boost device efficiencies provided that FRET rates outpace undesired relaxation pathways. However, predictive models for FRET between distinct 2D states are lacking, particularly with respect to the distance d between a donor and acceptor. We approach FRET in systems with binary mixtures of donor and acceptor 2D perovskite quantum wells (PQWs), and we synthetically tune distances between donor and acceptor by varying alkylammonium spacer cation lengths. FRET rates are monitored using transient absorption spectroscopy and ultrafast photoluminescence, revealing rapid picosecond lifetimes that scale with spacer cation length. We theoretically model these binary mixtures of PQWs, describing the emitters as classical oscillating dipoles. We find agreement with our empirical lifetimes and then determine the effects of lateral extent and layer thickness, establishing fundamental principles for FRET in 2D materials.
RESUMEN
BACKGROUND: Pharmacokinetic (PK) studies suggest that talazoparib is primarily eliminated unchanged via renal excretion. The current study investigated how varying degrees of renal impairment may affect the PK of talazoparib, and evaluated the safety and tolerability of talazoparib, in patients with advanced solid tumors with/without renal impairment. METHODS: Patients with advanced solid tumors and normal renal function or different degrees of renal impairment measured by estimated glomerular filtration rate (eGFR: mild = 60-89, moderate = 30-59, severe = 15-29 mL/min/1.73 m2) were enrolled in this open-label, non-randomized, phase I study. Talazoparib was administered orally at 0.5 mg/day for 22 days. Primary PK parameters included the area under the plasma concentration-time curve from 0 to 24 h (AUC0-24) and maximum observed plasma concentration (Cmax) at steady state (Day 22). Safety and tolerability were also investigated. RESULTS: Thirty-four patients were enrolled. At Day 22, compared with patients with normal renal function (n = 9), patients with mild (n = 9), moderate (n = 8), or severe (n = 8) renal impairment had a 12.2%, 43.0%, and 163.3% increase in talazoparib AUC0-24, and a 11.1%, 31.6%, and 89.3% increase in talazoparib Cmax, respectively. Talazoparib was generally well tolerated, and overall there were no notable differences in the treatment-emergent adverse event profile across renal function groups. CONCLUSIONS: Exposure to talazoparib increased with worsening renal impairment. Overall, this study confirms current dosing recommendations in patients with mild and moderate renal impairment (1 mg/day and 0.75 mg/day, respectively) and indicates that a lower starting dose of 0.5 mg/day should be considered for patients with severe renal impairment. CLINICAL TRIALS REGISTRATION: NCT02997163.
Asunto(s)
Neoplasias , Insuficiencia Renal , Área Bajo la Curva , Tasa de Filtración Glomerular , Humanos , Neoplasias/tratamiento farmacológico , Ftalazinas/efectos adversosRESUMEN
An emerging class of methylammonium lead iodide (MAPbI3)-based Ruddlesden-Popper (RP) phase perovskites, BA2MAn-1PbnI3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI3, yet still degrade at elevated temperatures. We experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m·K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m·K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m·K reported for single-crystal MAPbI3. Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.
RESUMEN
OBJECTIVES: This study examined whether palbociclib and cetuximab prolonged overall survival (OS) versus placebo and cetuximab. MATERIALS AND METHODS: In this double-blind, randomized, phase 2 trial (PALATINUS), patients with platinum-resistant, cetuximab-naïve, human papillomavirus-unrelated recurrent/metastatic head and neck squamous-cell carcinoma received cetuximab and either palbociclib (arm A) or placebo (arm B). The primary endpoint was OS; 120 patients were required to have ≥80% power to detect a hazard ratio (HR) of 0.6 (median OS of 10 months in arm A and 6 months in arm B) using a one-sided, log-rank test (P = 0.10). RESULTS: 125 patients were randomized (arm A: 65, arm B: 60). Median follow-up was 15.9 months (IQR, 11.3-22.7). Median OS was 9.7 months in arm A and 7.8 months in arm B (HR, 0.82; 95% CI, 0.54-1.25; P = 0.18). Median progression-free survival was 3.9 months in arm A and 4.6 months in arm B (HR, 1.00; 95% CI, 0.67-1.5; P = 0.50). The most common treatment-related adverse events in arm A were rash (39 patients, 60.9%) and neutropenia (26, 40.6%; three febrile) and in arm B was rash (32, 53.3%). CONCLUSION: There was no significant difference in median OS with palbociclib and cetuximab versus placebo and cetuximab. FUNDING: Pfizer Inc (NCT02499120).
Asunto(s)
Protocolos de Quimioterapia Combinada Antineoplásica/uso terapéutico , Carcinoma de Células Escamosas/tratamiento farmacológico , Cetuximab/uso terapéutico , Neoplasias de Cabeza y Cuello/tratamiento farmacológico , Piperazinas/uso terapéutico , Piridinas/uso terapéutico , Protocolos de Quimioterapia Combinada Antineoplásica/farmacología , Carcinoma de Células Escamosas/patología , Cetuximab/farmacología , Método Doble Ciego , Femenino , Neoplasias de Cabeza y Cuello/patología , Humanos , Persona de Mediana Edad , Metástasis de la Neoplasia , Recurrencia Local de Neoplasia , Piperazinas/farmacología , Piridinas/farmacología , Resultado del TratamientoRESUMEN
Two-dimensional (2D) halide perovskites have emerged as outstanding semiconducting materials thanks to their superior stability and structural diversity. However, the ever-growing field of optoelectronic device research using 2D perovskites requires systematic understanding of the effects of the spacer on the structure, properties, and device performance. So far, many studies are based on trial-and-error tests of random spacers with limited ability to predict the resulting structure of these synthetic experiments, hindering the discovery of novel 2D materials to be incorporated into high-performance devices. In this review, we provide guidelines on successfully choosing spacers and incorporating them into crystalline materials and optoelectronic devices. We first provide a summary of various synthetic methods to act as a tutorial for groups interested in pursuing synthesis of novel 2D perovskites. Second, we provide our insights on what kind of spacer cations can stabilize 2D perovskites followed by an extensive review of the spacer cations, which have been shown to stabilize 2D perovskites with an emphasis on the effects of the spacer on the structure and optical properties. Next, we provide a similar explanation for the methods used to fabricate films and their desired properties. Like the synthesis section, we will then focus on various spacers that have been used in devices and how they influence the film structure and device performance. With a comprehensive understanding of these effects, a rational selection of novel spacers can be made, accelerating this already exciting field.
RESUMEN
As a result of armed conflict, head trauma from exposure to blasts is an increasing critical health issue, particularly among military service members. Whilst numerous studies examined the burden of blast-related brain injuries on service members', few systematic reviews have been published. This work provides a comprehensive summary of the evidence on blast-related mild traumatic brain injury (mTBI) burden in active U.S. military service members and inactive Veterans, describing characteristics and outcomes. Records published up to April 2017 were identified through a search of PubMed, Web of Science, Scopus, Ovid MEDLINE, and Cochrane Library. Records-based and original research reporting on U.S. military service members and Veterans with mild blast TBI were included. Data on subject characteristics, exposure, diagnostic criterion, and outcomes were extracted from included studies using a standardized extraction form and were presented narratively. Of the 2,290 references identified by the search, 106 studies with a total of 37,515 participants met inclusion criteria for blast-related mTBI. All but nine studies were based out of military or Veteran medical facilities. Unsurprisingly, men were over-represented (75-100%). The criteria used to define blast-related mTBI were consistent; however, the methodology used to ascertain whether individuals met those criteria for diagnosis were inconsistent. The diagnosis, most prevalent among the Army, heavily relied on self-reported histories. Commonly reported adverse outcomes included hearing disturbances and headaches. The most frequently associated comorbidities were post-traumatic stress disorder, depression, anxiety, sleep disorders, attention disorders, and cognitive disorders. The primary objective of this review was to provide a summary of descriptive data on blast-related mTBI in a U.S. military population. Low standardization of the methods for reaching diagnosis and problems in the study reporting emphasize the importance to collect high-quality data to fill knowledge gaps pertaining to blast-related mTBI.
RESUMEN
The halide perovskite Ruddlesden-Popper (RP) phases are a homologous layered subclass of solution-processable semiconductors that have aroused great attention, especially for developing long-term solar photovoltaics. They are defined as (A')2(A)n-1PbnX3n+1 (A' = spacer cation, A = cage cation, and X = halide anion). The orientation control of low-temperature self-assembled thin films is a fundamental issue associated with the ability to control the charge carrier transport perpendicular to the substrate. Here we report new chemical derivatives designed from a molecular perspective using a novel spacer cation 3-phenyl-2-propenammonium (PPA) with conjugated backbone as a low-temperature strategy to assemble more efficient solar cells. First, we solved and refined the crystal structures of single crystals with the general formula (PPA)2(FA0.5MA0.5)n-1PbnI3n+1 (n = 2 and 3, space group C2) using X-ray diffraction and then used the mixed halide (PPA)2(Cs0.05(FA0.88MA0.12)0.95)n-1Pbn(I0.88Br0.12)3n+1 analogues to achieve more efficient devices. While forming the RP phases, multiple hydrogen bonds between PPA and inorganic octahedra reinforce the layered structure. For films we observe that as the targeted layer thickness index increases from n = 2 to n = 4, a less horizontal preferred orientation of the inorganic layers is progressively realized along with an increased presence of high-n or 3D phases, with an improved flow of free charge carriers and vertical to substrate conductivity. Accordingly, we achieve an efficiency of 14.76% for planar p-i-n solar cells using PPA-RP perovskites, which retain 93.8 ± 0.25% efficiency with encapsulation after 600 h at 85 °C and 85% humidity (ISOS-D-3).
RESUMEN
PURPOSE: This publication describes an evaluation of the impact of different degrees of renal impairment on the pharmacokinetics and safety of palbociclib after a single 125-mg oral dose. METHODS: Thirty-one subjects were assigned to different renal function groups. Serial blood sampling for pharmacokinetics was performed up to 120 h and 168 h post-palbociclib dose for subjects with normal and impaired renal function, respectively. A separate blood sample was collected at pre-dose and 8 h after dosing to measure plasma protein binding. Plasma palbociclib was measured using a validated liquid chromatography-tandem mass spectrometry (LC-MS/MS) method. Plasma protein binding samples were processed by equilibrium dialysis and measured by a validated LC-MS/MS method. RESULTS: Plasma palbociclib exposure was higher in subjects with renal impairment than in subjects with normal renal function; however, there were no marked differences in exposure across subjects with mild, moderate, and severe renal impairment. Total plasma exposure AUCinf increased by 39%, 42%, and 31% with mild, moderate, and severe renal impairment, respectively, relative to subjects with normal renal function. Peak exposure Cmax increased by 17%, 12%, and 15% for mild, moderate, and severe impairment, respectively. There was no obvious trend in the mean fu with worsening renal function. The PBPK model adequately described palbociclib exposure observed in subjects with moderate or severe renal impairment from this study. CONCLUSION: Palbociclib was safe and well-tolerated in a small population of subjects with normal and impaired renal function after a single oral 125 mg dose. No dose adjustment is required in patients with renal impairment.
Asunto(s)
Antineoplásicos/farmacocinética , Piperazinas/farmacocinética , Piridinas/farmacocinética , Eliminación Renal/fisiología , Insuficiencia Renal/sangre , Administración Oral , Adulto , Anciano , Antineoplásicos/administración & dosificación , Antineoplásicos/efectos adversos , Área Bajo la Curva , Neoplasias de la Mama/tratamiento farmacológico , Femenino , Semivida , Voluntarios Sanos , Humanos , Masculino , Persona de Mediana Edad , Piperazinas/administración & dosificación , Piperazinas/efectos adversos , Piridinas/administración & dosificación , Piridinas/efectos adversos , Insuficiencia Renal/diagnóstico , Insuficiencia Renal/fisiopatología , Índice de Severidad de la EnfermedadRESUMEN
The advent of the two-dimensional (2D) family of halide perovskites and their demonstration in 2D/three-dimensional (3D) hierarchical film structures broke new ground toward high device performance and good stability. The 2D Dion-Jacobson (DJ) phase halide perovskites are especially attractive in solar cells because of their superior charge transport properties. Here, we report on 2D DJ phase perovskites using a 3-(aminomethyl)piperidinium (3AMP) organic spacer for the fabrication of mixed Pb/Sn-based perovskites, exhibiting a narrow bandgap of 1.27 eV and a long carrier lifetime of 657.7 ns. Consequently, solar cells employing mixed 2D DJ 3AMP-based and 3D MA0.5FA0.5Pb0.5Sn0.5I3 (MA = methylammonium, FA = formamidinium) perovskite composites as light absorbers achieve enhanced efficiency and stability, giving a power conversion efficiency of 20.09% with a high open-circuit voltage of 0.88 V, a fill factor of 79.74%, and a short-circuit current density of 28.63 mA cm-2. The results provide an effective strategy to improve the performance of single-junction narrow-bandgap solar cells and, potentially, to give a highly efficient alternative to bottom solar cells in tandem devices.
RESUMEN
2D hybrid halide perovskites with the formula (A')2 (A)n -1 Pbn I3 n +1 have remarkable stability and promising efficiency in photovoltaic and optoelectronic devices, yet fundamental understanding of film formation, key to optimizing these devices, is lacking. Here, in situ grazing-incidence wide-angle X-ray scattering (GIWAXS) is used to monitor film formation during spin-coating. This elucidates the general film formation mechanism of 2D halide perovskites during one-step spin-coating. There are three stages of film formation: sol-gel, oriented 3D, and 2D. Three precursor phases form during the sol-gel stage and transform to perovskite, first giving a highly oriented 3D-like phase at the air/liquid interface followed by subsequent nucleations forming slightly less oriented 2D perovskite. Furthermore, heating before crystallization leads to fewer nucleations and faster removal of the precursors, improving orientation. This outlines the primary causes of phase distribution and perpendicular orientation in 2D perovskite films and paves the way for rationally designed film fabrication techniques.
RESUMEN
The advancement of improved photoactive materials, such as those proposed for next-generation solar cells, low-power lighting, and lasing applications, requires a deep understanding of their correlated spatial, spectral, and temporal properties. In principle, correlated time-resolved microscopy techniques are capable of capturing such information. However, the large data sets that encapsulate temporal, spectral, and spatial information create the prodigious challenge of analyzing gigabytes of correlated data, which typically takes enormous computational resources. These challenges motivate the development of robust and efficient data analysis tools to realize fast spatial and spectral decomposition and to gain physical insights that arise from statistical analysis. Herein, we propose a reliable and fast global analysis method based on variable projection and subsampling methods, which exhibits exceptionally high sensitivity to buried spatial and spectral information in large and multidimensional microscopy data sets as compared to traditional methods. The reliability and robustness of this new method is tested on transient absorption and impulsive vibrational microscopy data sets acquired on polycrystalline CH3NH3PbI3 perovskite films.
RESUMEN
Two-dimensional (2D) halide perovskites have great promise in optoelectronic devices because of their stability and optical tunability, but the subtle effects on the inorganic layer when modifying the organic spacer remain unclear. Here, we introduce two homologous series of Ruddlesden-Popper (RP) structures using the branched isobutylammonium (IBA) and isoamylammonium (IAA) cations with the general formula (RA)2(MA) n-1Pb n I3n+1 (RA = IBA, IAA; MA = methylammonium n = 1-4). Surprisingly, the IAA n = 2 member results in the first modulated 2D perovskite structure with a ripple with a periodicity of 50.6 Å occurring in the inorganic slab diagonally to the [101] direction of the basic unit cell. This leads to an increase of Pb-I-Pb angles along the direction of the wave. Generally, both series show larger in-plane bond angles resulting from the additional bulkiness of the spacers compensating for the MA's small size. Larger bond angles have been shown to decrease the bandgap which is seen here with the bulkier IBA leading to both larger in-plane angles and lower bandgaps except for n = 2, in which the modulated structure has a lower bandgap because of its larger Pb-I-Pb angles. Photo-response was tested for the n = 4 compounds and confirmed, signaling their potential use in solar cell devices. We made films using an MACl additive which showed good crystallinity and preferred orientation according to grazing-incidence wide-angle scattering (GIWAXS). As exemplar, the two n = 4 samples were employed in devices with champion efficiencies of 8.22% and 7.32% for IBA and IAA, respectively.