How to Target Small-Molecule Fluorescent Imaging Probes to the Plasma Membrane-The Influence and QSAR Modelling of Amphiphilicity, Lipophilicity, and Flip-Flop.

Many new fluorescent probes targeting the plasma membrane (PM) of living cells are currently being described. Such probes are carefully designed to report on relevant membrane features, but oddly, the structural features required for effective and selective targeting of PM often receive less attention, constituting a lacuna in the molecular design process. We aim to rectify this by clarifying how the amphiphilicity and lipophilicity of a probe, together with the tendency to flip-flop across the membrane, contribute to selective PM accumulation. A simplistic decision-rule QSAR model has been devised that predicts the accumulation/non-accumulation of small-molecule fluorescent probes in the PM. The model was based on probe log P plus various derived measures, allowing the roles of amphiphilicity, lipophilicity, and flip-flop to be taken into account. The validity and wide applicability of the model were demonstrated by evaluating its ability to predict amphiphilicity or PM accumulation patterns in surfactants, drugs, saponins, and PM probes. It is hoped that the model will aid in the more efficient design of effective PM probes.

Classification and naming of polymethine dyes used as staining agents for microscopy. A short guide for biomedical investigators.

The scientific literature contains many accounts of application of polymethine dyes, including cyanine dyes, as imaging agents, i.e., "biological stains," for microscopic investigation of biological materials. Currently, many such dyes are used as probes for living cells, i.e., "fluorescent probes." Polymethine dyes are defined here by two criteria. First, they possess a conjugated chain of (2n + 1) sp2-hybridized carbon atoms that connect a terminal π-electron-accepting (π-electron withdrawing) group with a terminal π-electron-donating group. Second, they have an odd number (2n + 3) of π-centers and an even number (2n + 4) of π-electrons in this chain, where n equals the number of -CR2=CR3- groups, usually vinylene groups -CH=CH-. Commercialization of diverse chemical types of many polymethine dyes has been attempted. The dyes that have achieved wide application, however, are limited in number and it is these dyes that are emphasized here. Because these polymethine dyes sometimes have been described by confusing, and sometimes confused, names, we clarify here the chemical categories and names of such dyes for the nonchemist, biomedical end user of such imaging agents. Nevertheless, the nomenclature presented here is not intended to replace the traditional "chromophore" categories of dyestuff chemistry, because the latter are held in place both by wide usage and by venerable authorities, such as the Colour Index.

Modeling the extent of conjugation in histochemical dyes and fluorescent probes: clarification in calculating conjugated bond number (CBN) and introduction of a new parameter, resonance energy.

Determining the extent of conjugation in dyes and fluorochromes is a helpful tool for understanding or predicting the behavior of these compounds when used as stains for microscopy. One measure that has been used repeatedly is conjugated bond number (CBN), which is the number of bonds in a conjugated system. CBN can be obtained by inspection of the structure of a compound, but the rules for how to determine what constitutes a conjugated system are not fully established. Using molecular modeling software, we have defined more clearly which groups contribute to conjugation and which do not. We accomplished this by using a new parameter, resonance energy (RE'), which is the energy differential between a conjugated compound and its unconjugated counterpart. Conjugated compounds possess less energy. If a compound contains a questionable atom or group, RE' can be calculated for the compound with and without that group. If RE' is the same for both, the group in question plays no role in the resonance and thus is not part of the conjugated system.

Using QSAR Models to Predict Mitochondrial Targeting by Small-Molecule Xenobiotics Within Living Cells.

Prediction of mitochondrial targeting, or prediction of exclusion from mitochondria, of small-molecule xenobiotics (biocides, drugs, probes, toxins) can be achieved using an algorithm derived from QSAR modeling. Application of the algorithm requires knowing the chemical structures of all ionic species of the xenobiotic compound in question, and for certain numerical structure parameters (AI, CBN, log P, pK a, and Z) to be obtained for all such species. Procedures for specification of the chemical structures; estimation of the structure parameters; and application of the algorithm are described in an explicit protocol.

Fluorescent redox-dependent labeling of lipid droplets in cultured cells by reduced phenazine methosulfate.

Natural and synthetic phenazines are widely used in biomedical sciences. In dehydrogenase histochemistry, phenazine methosulfate (PMS) is applied as a redox reagent for coupling reduced coenzymes to the reduction of tetrazolium salts into colored formazans. PMS is also currently used for cytotoxicity and viability assays of cell cultures using sulfonated tetrazoliums. Under UV (340 nm) excitation, aqueous solutions of the cationic PMS show green fluorescence (λem: 526 nm), whereas the reduced hydrophobic derivative (methyl-phenazine, MPH) shows blue fluorescence (λem: 465 nm). Under UV (365 nm) excitation, cultured cells (LM2, IGROV-1, BGC-1, and 3T3-L1 adipocytes) treated with PMS (5 µg/mL, 30 min) showed cytoplasmic granules with bright blue fluorescence, which correspond to lipid droplets labeled by the lipophilic methyl-phenazine. After formaldehyde fixation blue-fluorescing droplets could be stained with oil red O. Interestingly, PMS-treated 3T3-L1 adipocytes observed under UV excitation 24 h after labeling showed large lipid droplets with a weak green emission within a diffuse pale blue-fluorescing cytoplasm, whereas a strong green emission was observed in small lipid droplets. This fluorescence change from blue to green indicates that reoxidation of methyl-phenazine to PMS can occur. Regarding cell uptake and labeling mechanisms, QSAR models predict that the hydrophilic PMS is not significantly membrane-permeant, so most PMS reduction is expected to be extracellular and associated with a plasma membrane NAD(P)H reductase. Once formed, the lipophilic and blue-fluorescing methyl-phenazine enters live cells and mainly accumulates in lipid droplets. Overall, the results reported here indicate that PMS is an excellent fluorescent probe to investigate labeling and redox dynamics of lipid droplets in cultured cells.

Tetrazolium salts and formazan products in Cell Biology: Viability assessment, fluorescence imaging, and labeling perspectives.

For many years various tetrazolium salts and their formazan products have been employed in histochemistry and for assessing cell viability. For the latter application, the most widely used are 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT), and 5-cyano-2,3-di-(p-tolyl)-tetrazolium chloride (CTC) for viability assays of eukaryotic cells and bacteria, respectively. In these cases, the nicotinamide-adenine-dinucleotide (NAD(P)H) coenzyme and dehydrogenases from metabolically active cells reduce tetrazolium salts to strongly colored and lipophilic formazan products, which are then quantified by absorbance (MTT) or fluorescence (CTC). More recently, certain sulfonated tetrazolium, which give rise to water-soluble formazans, have also proved useful for cytotoxicity assays. We describe several aspects of the application of tetrazolium salts and formazans in biomedical cell biology research, mainly regarding formazan-based colorimetric assays, cellular reduction of MTT, and localization and fluorescence of the MTT formazan in lipidic cell structures. In addition, some pharmacological and labeling perspectives of these compounds are also described.

Prediction of Intracellular Localization of Fluorescent Dyes Using QSAR Models.

Control of fluorescent dye localization in live cells is crucial for fluorescence imaging. Here, we describe quantitative structure activity relation (QSAR) models for predicting intracellular localization of fluorescent dyes. For generating the QSAR models, electric charge (Z) calculated by pKa, conjugated bond number (CBN), the largest conjugated fragment (LCF), molecular weight (MW) and log P were used as parameters. We identified the intracellular localization of 119 BODIPY dyes in live NIH3T3 cells, and assessed the accuracy of our models by comparing their predictions with the observed dye localizations. As predicted by the models, no BODIPY dyes localized in nuclei or plasma membranes. The accuracy of the model for localization in fat droplets was 92%, with the models for cytosol and lysosomes showing poorer agreement with observed dye localization, albeit well above chance levels. Overall therefore the utility of QSAR models for predicting dye localization in live cells was clearly demonstrated.

Necrosis avid near infrared fluorescent cyanines for imaging cell death and their use to monitor therapeutic efficacy in mouse tumor models.

Quantification of tumor necrosis in cancer patients is of diagnostic value as the amount of necrosis is correlated with disease prognosis and it could also be used to predict early efficacy of anti-cancer treatments. In the present study, we identified two near infrared fluorescent (NIRF) carboxylated cyanines, HQ5 and IRDye 800CW (800CW), which possess strong necrosis avidity. In vitro studies showed that both dyes selectively bind to cytoplasmic proteins of dead cells that have lost membrane integrity. Affinity for cytoplasmic proteins was confirmed using quantitative structure activity relations modeling. In vivo results, using NIRF and optoacoustic imaging, confirmed the necrosis avid properties of HQ5 and 800CW in a mouse 4T1 breast cancer tumor model of spontaneous necrosis. Finally, in a mouse EL4 lymphoma tumor model, already 24 h post chemotherapy, a significant increase in 800CW fluorescence intensity was observed in treated compared to untreated tumors. In conclusion, we show, for the first time, that the NIRF carboxylated cyanines HQ5 and 800CW possess strong necrosis avid properties in vitro and in vivo. When translated to the clinic, these dyes may be used for diagnostic or prognostic purposes and for monitoring in vivo tumor response early after the start of treatment.

Massive Bioaccumulation and Self-Assembly of Phenazine Compounds in Live Cells.

Clofazimine is an orally administered, FDA-approved drug that massively bioaccumulates in macrophages, forming membrane-bound intracellular structures possessing nanoscale supramolecular features. Here, a library of phenazine compounds derived from clofazimine was synthesized and tested for their ability to accumulate and form ordered molecular aggregates inside cells. Regardless of chemical structure or physicochemical properties, bioaccumulation was consistently greater in macrophages than in epithelial cells. Microscopically, some self-assembled structures exhibited a pronounced, diattenuation anisotropy signal, evident by the differential absorption of linearly polarized light, at the peak absorbance wavelength of the phenazine core. The measured anisotropy was well above the background anisotropy of endogenous cellular components, reflecting the self-assembly of condensed, insoluble complexes of ordered phenazine molecules. Chemical variations introduced at the R-imino position of the phenazine core led to idiosyncratic effects on the compounds' bioaccumulation behavior, as well as on the morphology and organization of the resulting intracellular structures. Beyond clofazimine, these results demonstrate how the self-assembly of membrane-permeant, orally-bioavailable small molecule building blocks can endow cells with unnatural structural elements possessing chemical, physical and functional characteristics unlike those of other natural cellular components.

Predicting mitochondrial targeting by small molecule xenobiotics within living cells using QSAR models.

Whether small molecule xenobiotics (biocides, drugs, probes, toxins) will target mitochondria in living cells can be predicted using an algorithm derived from QSAR modeling. Application of the algorithm requires the chemical structures of all ionic species of the xenobiotic compound in question to be defined, and for certain numerical structure parameters (AI, CBN, log P, pKa, and Z) to be obtained for all such species. How the chemical structures are specified, how the structure parameters are obtained or estimated, and how the algorithm is used are described in an explicit protocol.

Identifying different types of chromatin using Giemsa staining.

Mixtures of polychrome methylene blue-eosin Y (i.e., Giemsa stain) are widely used in biological staining. They induce a striking purple coloration of chromatin DNA (the Romanowsky-Giemsa effect), which contrasts with the blue-stained RNA-containing cytoplasm and nucleoli. After specific prestaining treatments that induce chromatin disorganization (giving banded or harlequin chromosomes), Giemsa staining produces a differential coloration, with C- and G-bands appearing in purple whereas remaining chromosome regions are blue. Unsubstituted (TT) and bromo-substituted (BT) DNAs also appear purple and blue, respectively. The same occurs in the case of BT and BB chromatids.In addition to discussing the use of Giemsa stain as a suitable method to reveal specific features of chromosome structure, some molecular processes and models are also described to explain Giemsa staining mechanisms of chromatin.

Alternative methods for estimating common descriptors for QSAR studies of dyes and fluorescent probes using molecular modeling software. 2. Correlations between log P and the hydrophilic/lipophilic index, and new methods for estimating degrees of amphiphilicity.

The log P descriptor, despite its usefulness, can be difficult to use, especially for researchers lacking skills in physical chemistry. Moreover this classic measure has been determined in numerous ways, which can result in inconsistant estimates of log P values, especially for relatively complex molecules such as fluorescent probes. Novel measures of hydrophilicity/lipophilicity (the Hydrophilic/Lipophilic Index, HLI) and amphiphilicity (hydrophilic/lipophilic indices for the head group and tail, HLIT and HLIHG, respectively) therefore have been devised. We compare these descriptors with measures based on log P, the standard method for quantitative structure activity relationships (QSAR) studies. HLI can be determined using widely available molecular modeling software, coupled with simple arithmetic calculations. It is based on partial atomic charges and is intended to be a stand-alone measure of hydrophilicity/lipophilicity. Given the wide application of log P, however, we investigated the correlation between HLI and log P using a test set of 56 fluorescent probes of widely different physicochemical character. Overall correlation was poor; however, correlation of HLI and log P for probes of narrowly specified charge types, i.e., non-ionic compounds, anions, conjugated cations, or zwitterions, was excellent. Values for probes with additional nonconjugated quaternary cations, however, were less well correlated. The newly devised HLI can be divided into domain-specific descriptors, HLIT and HLIHG in amphiphilic probes. Determinations of amphiphilicity, made independently by the authors using their respective methods, showed excellent agreement. Quantifying amphiphilicity from partial log P values of the head group (head group hydrophilicity; HGH) and tail (amphiphilicity index; AI) has proved useful for understanding fluorescent probe action. The same limitations of log P apply to HGH and AI, however. The novel descriptors, HLIT and HLIHG, offer analogous advantages to those seen with HLI over log P. The high correlation between log P and HLI, and the concordance between the two systems for assessing amphiphilicity, provide a powerful tool for QSAR studies. It is possible now to select a probe with missing fragments, and thus no log P, AI or HGH; and to estimate these important descriptors from parameters derived from HLI.

Uptake and localisation of small-molecule fluorescent probes in living cells: a critical appraisal of QSAR models and a case study concerning probes for DNA and RNA.

Small-molecule fluorochromes are used in biology and medicine to generate informative microscopic and macroscopic images, permitting identification of cell structures, measurement of physiological/physicochemical properties, assessment of biological functions and assay of chemical components. Modes of uptake and precise intracellular localisation of a probe are typically significant factors in its successful application. These processes and localisations can be predicted using quantitative structure activity relations (QSAR) models, which correlate aspects of the physicochemical properties of the probes (expressed numerically) with the uptake/localisation. Pay-offs of such modelling include better understanding and trouble-shooting of current and novel probes, and easier design of future probes ("guided synthesis"). Uptake models discussed consider adsorptive (to lipid or protein domains), phagocytic and pinocytotic endocytosis, as well as passive diffusion. Localisation models discussed include those for cytosol, endoplasmic reticulum, Golgi apparatus, lipid droplets, lysosomes, mitochondria, nucleus and plasma membrane. A case example illustrates how such QSAR modelling of probe interactions can clarify localisation and mode of binding of probes to intracellular nucleic acids of living cells, including not only eukaryotic chromatin DNA and ribosomal RNA, but also prokaryote chromosomes.

MTT assay for cell viability: Intracellular localization of the formazan product is in lipid droplets.

Although MTT is widely used to assess cytotoxicity and cell viability, the precise localization of its reduced formazan product is still unclear. In the present study the localization of MTT formazan was studied by direct microscopic observation of living HeLa cells and by colocalization analysis with organelle-selective fluorescent probes. MTT formazan granules did not colocalize with mitochondria as revealed by rhodamine 123 labeling or autofluorescence. Likewise, no colocalization was observed between MTT formazan granules and lysosomes labeled by neutral red. Taking into account the lipophilic character and lipid solubility of MTT formazan, an evaluation of the MTT reaction was performed after treatment of cells with sunflower oil emulsions to induce a massive occurrence of lipid droplets. Under this condition, lipid droplets revealed a large amount of MTT formazan deposits. Kinetic studies on the viability of MTT-treated cells showed no harmful effects at short times. Quantitative structure-activity relations (QSAR) models were used to predict and explain the localization of both the MTT tetrazolium salt and its formazan product. These predictions were in agreement with experimental observations on the accumulation of MTT formazan product in lipid droplets.

Nanocarrier-assisted sub-cellular targeting to the site of mitochondria improves the pro-apoptotic activity of paclitaxel.

Many drug molecules exert their biological action on intracellular molecular targets present on or inside various cellular organelles. Consequently, it has become more evident that the efficiency and efficacy of drug action is dependent largely on how well an unaided drug molecule is able to reach its intracellular target. We hypothesized that the biological action of such drug molecules might be improved by specific delivery to the appropriate sub-cellular site by a pharmaceutical carrier designed for the purpose. To test our hypothesis, we used paclitaxel, a molecule that has recently been shown to have pro-apoptotic biological targets on the mitochondria but has a quantitative structure-activity relationship-predicted cytosolic accumulation and no affinity for mitochondria. Using a mitochondria-specific nanocarrier system (DQAsomes) prepared from the amphiphilic quinolinium derivative dequalinium chloride to deliver paclitaxel to mitochondria in cells, we report that it is possible to improve the pro-apoptotic action of paclitaxel.

Quantitative modeling of selective lysosomal targeting for drug design.

Lysosomes are acidic organelles and are involved in various diseases, the most prominent is malaria. Accumulation of molecules in the cell by diffusion from the external solution into cytosol, lysosome and mitochondrium was calculated with the Fick-Nernst-Planck equation. The cell model considers the diffusion of neutral and ionic molecules across biomembranes, protonation to mono- or bivalent ions, adsorption to lipids, and electrical attraction or repulsion. Based on simulation results, high and selective accumulation in lysosomes was found for weak mono- and bivalent bases with intermediate to high log K (ow). These findings were validated with experimental results and by a comparison to the properties of antimalarial drugs in clinical use. For ten active compounds, nine were predicted to accumulate to a greater extent in lysosomes than in other organelles, six of these were in the optimum range predicted by the model and three were close. Five of the antimalarial drugs were lipophilic weak dibasic compounds. The predicted optimum properties for a selective accumulation of weak bivalent bases in lysosomes are consistent with experimental values and are more accurate than any prior calculation. This demonstrates that the cell model can be a useful tool for the design of effective lysosome-targeting drugs with minimal off-target interactions.