RESUMEN
Indigo, as a water-soluble non-azo colorant, is widely used in textile, food, pharmaceutical and other industrial fields. Currently, indigo is primarily synthesized by chemical methods, which causes environmental pollution, potential safety hazards, and other issues. Therefore, there is an urgent need to find a safer and greener synthetic method. In this study, a dual-enzyme cascade pathway was constructed with the tryptophan synthase (tryptophanase, EcTnaA) from Escherichia coli and flavin-dependent monooxygenase (flavin-dependent monooxygenase, MaFMO) from Methylophaga aminisulfidivorans to synthesize indigo with L-tryptophan as substrate. A recombinant strain EM-IND01 was obtained. The beneficial mutant MaFMOD197E was obtained by protein engineering of the rate-limiting enzyme MaFMO. MaFMOD197E showed the specific activity and kcat/Km value 2.36 times and 1.34 times higher than that of the wild type, respectively. Furthermore, MaFMOD197E was introduced into the strain EM-IND01 to construct the strain EM-IND02. After the fermentation conditions were optimized, the strain achieved the indigo titer of (1 288.59±7.50) mg/L, the yield of 0.86 mg/mg L-tryptophan, and the productivity of 26.85 mg/(L·h) in a 5 L fermenter. Protein engineering was used to obtain mutants with increased MaFMO activity in this study, which laid a foundation for industrial production of indigo.
Asunto(s)
Escherichia coli , Carmin de Índigo , Triptófano , Carmin de Índigo/metabolismo , Triptófano/metabolismo , Triptófano/biosíntesis , Escherichia coli/genética , Escherichia coli/metabolismo , Ingeniería de Proteínas , Triptofanasa/genética , Triptofanasa/metabolismo , Triptófano Sintasa/metabolismo , Triptófano Sintasa/genética , Fermentación , Oxigenasas/genética , Oxigenasas/metabolismoRESUMEN
Exploring the promiscuity of native enzymes presents a promising strategy for expanding their synthetic applications, particularly for catalyzing challenging reactions in non-native contexts. In this study, we explore the promiscuous potential of old yellow enzymes (OYEs) to facilitate the Morita-Baylis-Hillman reaction (MBH reaction), leveraging substrate similarities between MBH reaction and reduction reaction. Using mass spectrometry and spectroscopic techniques, we confirm promiscuity of GkOYE in both MBH and reduction reactions. By blocking H- and H+ transfer pathways, we engineer GkOYE.8, which loses its reduction ability but enhances its MBH activity. The structural basis of MBH reaction catalyzed by GkOYE.8 is obtained through mutation studies and kinetic simulations. Furthermore, enantiocomplementary mutants GkOYE.11 and GkOYE.13 are obtained by directed evolution, exhibiting the ability to accept various aromatic aldehydes and alkenes as substrates. This study demonstrates the potential of leveraging substrate similarities to unlock enzyme functionalities, enabling the catalysis of new-to-nature reactions.
Asunto(s)
Biocatálisis , Especificidad por Sustrato , Cinética , Aldehídos/metabolismo , Aldehídos/química , Catálisis , Mutación , Alquenos/metabolismo , Alquenos/química , Proteínas Bacterianas/metabolismo , Proteínas Bacterianas/genética , Proteínas Bacterianas/química , Ingeniería de ProteínasRESUMEN
Hyperosmotic stress tolerance is crucial for Saccharomyces cerevisiae in producing value-added products from renewable feedstock. The limited understanding of its tolerance mechanism has impeded the application of these microbial cell factories. Previous studies have shown that Med3 plays a role in hyperosmotic stress in S. cerevisiae. However, the specific function of Med3 in hyperosmotic stress tolerance remains unclear. In this study, we showed that the deletion of the mediator Med3 impairs S. cerevisiae growth under hyperosmotic stress. Phenotypic analyses and yeast two-hybrid assays revealed that Med3 interacts with the transcription factor Stb5 to regulate the expression of the genes gnd1 and ald6, which are involved in NADPH production under hyperosmotic stress conditions. The deletion of med3 resulted in a decrease in intracellular NADPH content, leading to increased oxidative stress and elevated levels of intracellular reactive oxygen species under hyperosmotic stress, thereby impacting bud formation. These findings highlight the significant role of Med3 as a regulator in maintaining NADPH generation and redox homeostasis in S. cerevisiae during hyperosmotic stress.IMPORTANCEHyperosmotic stress tolerance in the host strain is a significant challenge for fermentation performance in industrial production. In this study, we showed that the S. cerevisiae mediator Med3 is essential for yeast growth under hyperosmotic conditions. Med3 interacts with the transcription factor Stb5 to regulate the expression of genes involved in the NADPH-generation system during hyperosmotic stress. Adequate NADPH ensures the timely removal of excess reactive oxygen species and supports bud formation under these conditions. This work highlights the crucial role of Med3 as a regulator in maintaining NADPH generation and redox homeostasis in S. cerevisiae during hyperosmotic stress.
Asunto(s)
NADP , Presión Osmótica , Proteínas de Saccharomyces cerevisiae , Saccharomyces cerevisiae , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Saccharomyces cerevisiae/crecimiento & desarrollo , Proteínas de Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/metabolismo , NADP/metabolismo , Factores de Transcripción/metabolismo , Factores de Transcripción/genética , Regulación Fúngica de la Expresión Génica , Estrés Oxidativo , Complejo Mediador/metabolismo , Complejo Mediador/genética , Especies Reactivas de Oxígeno/metabolismoRESUMEN
Aromatic d-amino acids (d-AAs) play a pivotal role as important chiral building blocks and key intermediates in fine chemical and drug synthesis. Meso-diaminopimelate dehydrogenase (DAPDH) serves as an excellent biocatalyst in the synthesis of d-AAs and their derivatives. However, its strict substrate specificity and the lack of efficient engineering methods have hindered its widespread application. Therefore, this study aims to elucidate the catalytic mechanism underlying DAPDH from Proteus vulgaris (PvDAPDH) through the examination of its crystallographic structure, computational simulations of potential energies and molecular dynamics simulations, and site-directed mutagenesis. Mechanism-guided computational design showed that the optimal mutant PvDAPDH-M3 increased specific activity and catalytic efficiency (kcat/Km) for aromatic keto acids up to 124-fold and 92.4-fold, respectively, compared to that of the wild type. Additionally, it expanded the substrate scope to 10 aromatic keto acid substrates. Finally, six high-value-added aromatic d-AAs and their derivatives were synthesized using a one-pot three-enzyme cascade reaction, exhibiting a good conversion rate ranging from 32 to 84% and excellent stereoselectivity (enantiomeric excess >99%). These findings provide a potential synthetic pathway for the green industrial production of aromatic d-AAs.
Asunto(s)
Aminoácido Oxidorreductasas , Aminoácidos Aromáticos , Simulación de Dinámica Molecular , Mutagénesis Sitio-Dirigida , Aminoácido Oxidorreductasas/metabolismo , Aminoácido Oxidorreductasas/genética , Aminoácido Oxidorreductasas/química , Especificidad por Sustrato , Aminoácidos Aromáticos/metabolismo , Aminoácidos Aromáticos/biosíntesis , Proteus vulgaris/enzimología , Proteus vulgaris/genética , Biocatálisis , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Proteínas Bacterianas/químicaRESUMEN
Para-hydroxybenzoic acid (PHBA) is extensively used as an additive in the food and cosmetics industries, significantly enhancing product shelf life and stability. While microbial fermentation offers an environment-friendly and sustainable method for producing PHBA, the titer and productivity are limited due to product toxicity and complex metabolic flux distributions. Here, we initially redesigned a L-phenylalanine-producing Escherichia coli by employing rational metabolic engineering strategies, resulting in the production of PHBA reached the highest reported level of 14.17 g/L. Subsequently, a novel accelerated evolution system was devised comprising deaminase, the alpha subunit of RNA polymerase, an uracil-DNA glycosylase inhibitor, and the PHBA-responsive promoter PyhcN. This system enabled us to obtain a mutant strain exhibiting a 47% increase in the half-inhibitory concentration (IC50) for PHBA within 15 days. Finally, the evolved strain achieved a production of 21.35 g/L PHBA in a 5-L fermenter, with a yield of 0.19 g/g glucose and a productivity rate of 0.44 g/L/h. This engineered strain emerges as a promising candidate for industrial production of PHBA through an eco-friendly approach.
Asunto(s)
Escherichia coli , Fermentación , Ingeniería Metabólica , Parabenos , Escherichia coli/genética , Escherichia coli/metabolismo , Parabenos/metabolismoRESUMEN
P-coumaric acid (p-CA), a pant metabolite with antioxidant and anti-inflammatory activity, is extensively utilized in biomedicine, food, and cosmetics industry. In this study, a synthetic pathway (PAL) for p-CA was designed, integrating three enzymes (AtPAL2, AtC4H, AtATR2) into a higher l-phenylalanine-producing strain Escherichia coli PHE05. However, the lower soluble expression and activity of AtC4H in the PAL pathway was a bottleneck for increasing p-CA titers. To overcome this limitation, the soluble expression of AtC4H was enhanced through N-terminal modifications. And an optimal mutant, AtC4HL373T/G211H, which exhibited a 4.3-fold higher kcat/Km value compared to the wild type, was developed. In addition, metabolic engineering strategies were employed to increase the intracellular NADPH pool. Overexpression of ppnk in engineered E. coli PHCA20 led to a 13.9-folds, 1.3-folds, and 29.1% in NADPH content, the NADPH/NADP+ ratio and p-CA titer, respectively. These optimizations significantly enhance p-CA production, in a 5-L fermenter using fed-batch fermentation, the p-CA titer, yield and productivity of engineered strain E. coli PHCA20 were 3.09 g/L, 20.01 mg/g glucose, and 49.05 mg/L/h, respectively. The results presented here provide a novel way to efficiently produce the plant metabolites using an industrial strain.
Asunto(s)
Ácidos Cumáricos , Escherichia coli , Glucosa , Ingeniería Metabólica , Propionatos , Escherichia coli/genética , Escherichia coli/metabolismo , Ácidos Cumáricos/metabolismo , Ingeniería Metabólica/métodos , Glucosa/metabolismo , Propionatos/metabolismoRESUMEN
D-allulose is a naturally occurring rare sugar and beneficial to human health. However, the efficient biosynthesis of D-allulose remains a challenge. Here, we mined a new D-tagatose 3-epimerase from Kroppenstedtia eburnean (KeDt3e) with high catalytic efficiency. Initially, crucial factors contributing to the low conversion of KeDt3e were identified through crystal structure analysis, density functional theory calculations (DFT), and molecular dynamics (MD) simulations. Subsequently, based on the mechanism, combining restructuring the flexible region, proline substitution based onconsensus sequence analysis, introducing disulfide bonds, and grafting properties, and reshaping the active center, the optimal mutant M5 of KeDt3e was obtained with enhanced thermostability and activity. The optimal mutant M5 exhibited an enzyme activity of 130.8â¯U/mg, representing a 1.2-fold increase; Tm value increased from 52.7 °C to 71.2 °C; and half-life at 55 °C extended to 273.7â¯min, representing a 58.2-fold improvement, and the detailed mechanism of performance improvement was analyzed. Finally, by screening the ribosome-binding site (RBS) of the optimal mutant M5 recombinant bacterium (G01), the engineered strain G08 with higher expression levels was obtained. The engineered strain G08 catalyzed 500â¯g/L D-fructose to produce 172.4â¯g/L D-allulose, with a conversion of 34.4% in 0.5 h and productivity of 344.8â¯g/L/h on a 1â¯L scale. This study presents a promising approach for industrial-scale production of D-allulose.
Asunto(s)
Carbohidrato Epimerasas , Estabilidad de Enzimas , Hexosas , Hexosas/metabolismo , Carbohidrato Epimerasas/genética , Carbohidrato Epimerasas/metabolismo , Carbohidrato Epimerasas/química , Simulación de Dinámica Molecular , Fructosa/metabolismo , Cinética , Proteínas Bacterianas/metabolismo , Proteínas Bacterianas/genética , Proteínas Bacterianas/química , Especificidad por Sustrato , Ingeniería de Proteínas , Racemasas y Epimerasas/metabolismo , Racemasas y Epimerasas/genética , Racemasas y Epimerasas/químicaRESUMEN
Pyridoxal 5'-phosphate (PLP) is highly valuable in food and medicine. However, achieving the efficient biosynthesis of PLP remains challenging. Here, a salvage pathway using acid phosphatase from Salmonella typhi (StAPase) and pyridoxine oxidase from Escherichia coli (EcPNPO) as pathway enzymes was established for the first time to synthesize PLP from pyridoxine (PN) and pyrophosphate (PPi). StAPase was identified as a rate-limiting enzyme. Two protein modification strategies were developed based on the PN phosphorylation mechanism: (1) improving the binding of PN into StAPase and (2) enhancing the hydrophobicity of StAPase's substrate binding pocket. The kcat/Km of optimal mutant M7 was 4.9 times higher than that of the wild type. The detailed mechanism of performance improvement was analyzed. Under the catalysis of M7 and EcPNPO, a PLP high-yielding strain of 14.5 ± 0.55 g/L was engineered with a productivity of 1.0 ± 0.02 g/(L h) (the highest to date). The study suggests a promising method for industrial-scale PLP production.
RESUMEN
Photosynthesis in plants occurs within specialized organelles known as chloroplasts, which are postulated to have originated through endosymbiosis with cyanobacteria. In nature, instances are also observed wherein specific invertebrates engage in symbiotic relationships with photosynthetic bacteria, allowing them to subsist as photoautotrophic organisms over extended durations. Consequently, the concept of engineering artificial endosymbiosis between mammalian cells and cyanobacteria represents a promising avenue for enabling photosynthesis in mammals. The study embarked with the identification of Synechocystis PCC 6803 as a suitable candidate for establishing a long-term endosymbiotic relationship with macrophages. The cyanobacteria internalized by macrophages exhibited the capacity to rescue ATP deficiencies within their host cells under conditions of illumination. Following this discovery, a membrane-coating strategy is developed for the intracellular delivery of cyanobacteria into non-macrophage mammalian cells. This pioneering technique led to the identification of human embryonic kidney cells HEK293 as optimal hosts for achieving sustained endosymbiosis with Synechocystis PCC 6803. The study offers valuable insights that may serve as a reference for the eventual achievement of artificial photosynthesis in mammals.
Asunto(s)
Fotosíntesis , Simbiosis , Synechocystis , Humanos , Simbiosis/fisiología , Células HEK293 , Synechocystis/metabolismo , Synechocystis/fisiología , Animales , Macrófagos/metabolismo , Adenosina Trifosfato/metabolismoRESUMEN
Protocatechuic acid (3, 4-dihydroxybenzoic acid, PCA) is widely used in the pharmaceuticals, health food, and cosmetics industries owing to its diverse biological activities. However, the inhibition of 3-dehydroshikimate dehydratase (AroZ) by PCA and its toxicity to cells limit the efficient production of PCA in Escherichia coli. In this study, a high-level strain of 3-dehydroshikimate, E. coli DHS01, was developed by blocking the carbon flow from the shikimate-overproducing strain E. coli SA09. Additionally, the PCA biosynthetic pathway was established in DHS01 by introducing the high-activity ApAroZ. Subsequently, the protein structure and catalytic mechanism of 3-dehydroshikimate dehydratase from Acinetobacter pittii PHEA-2 (ApAroZ) were clarified. The variant ApAroZR363A, achieved by modulating the conformational dynamics of ApAroZ, effectively relieved product inhibition. Additionally, the tolerance of the strain E. coli PCA04 to PCA was enhanced by adaptive laboratory evolution, and a biosensor-assisted high-throughput screening method was designed and implemented to expedite the identification of high-performance PCA-producing strains. Finally, in a 5 L bioreactor, the final strain PCA05 achieved the highest PCA titer of 46.65 g/L, a yield of 0.23 g/g, and a productivity of 1.46 g/L/h for PCA synthesis from glucose using normal fed-batch fermentation. The strategies described herein serve as valuable guidelines for the production of other high-value and toxic products.
Asunto(s)
Escherichia coli , Hidroxibenzoatos , Ingeniería Metabólica , Escherichia coli/genética , Escherichia coli/metabolismo , Ingeniería Metabólica/métodos , Reactores Biológicos , FermentaciónRESUMEN
Microbial cell factories offer a promising strategy for the sustainable production of industrial chemicals from renewable biomass feedstock. However, their performance is often limited by poor microbial cell viability (MCV). Here, MCV was engineered to enhance chemical production by optimizing the regulation of lifespan-specific genes to reduce the accumulation of reactive oxygen species (ROS). In Escherichia coli, MCV was improved by reducing ROS accumulation using second codon engineering to regulate hypoxia-inducible transcription factor (arcA), resulting in lysine production up to 213 g L-1 with its productivity 5.90 g L-1·h-1. In Saccharomyces cerevisiae, MCV was increased by decreasing ROS accumulation using second codon engineering to fine-tune ceramide synthase (lag1), leading to glucaric acid production up to 9.50 g L-1 with its productivity 0.057 g L-1·h-1. These results demonstrate that engineering MCV is a potential strategy to boost the performance of microbial cell factories in industrial processes.
Asunto(s)
Escherichia coli , Ingeniería Metabólica , Supervivencia Celular , Codón/genética , Escherichia coli/genética , Ingeniería Metabólica/métodos , Especies Reactivas de Oxígeno , Saccharomyces cerevisiae/genéticaRESUMEN
Cytochrome P450 enzymes (CYPs) catalyze a series of C-H and C=C oxygenation reactions, including hydroxylation, epoxidation, and ketonization. They are attractive biocatalysts because of their ability to selectively introduce oxygen into inert molecules under mild conditions. This review provides a comprehensive overview of the C-H and C=C oxygenation reactions catalyzed by CYPs and the various strategies for achieving higher selectivity and enzymatic activity. Furthermore, we discuss the application of C-H and C=C oxygenation catalyzed by CYPs to obtain the desired chemicals or pharmaceutical intermediates in practical production. The rapid development of protein engineering for CYPs provides excellent biocatalysts for selective C-H and C=C oxygenation reactions, thereby promoting the development of environmentally friendly and sustainable production processes.
RESUMEN
Saccharomyces cerevisiae is widely employed as a cell factory for the production of biofuels. However, product toxicity has hindered improvements in biofuel production. Here, we engineer the actin cytoskeleton in S. cerevisiae to increase both the cell growth and production of n-butanol and medium-chain fatty acids. Actin cable tortuosity is regulated using an n-butanol responsive promoter-based autonomous bidirectional signal conditioner in S. cerevisiae. The budding index is increased by 14.0%, resulting in the highest n-butanol titer of 1674.3 mg L-1. Moreover, actin patch density is fine-tuned using a medium-chain fatty acid responsive promoter-based autonomous bidirectional signal conditioner. The intracellular pH is stabilized at 6.4, yielding the highest medium-chain fatty acids titer of 692.3 mg L-1 in yeast extract peptone dextrose medium. Engineering the actin cytoskeleton in S. cerevisiae can efficiently alleviate biofuels toxicity and enhance biofuels production.
Asunto(s)
Biocombustibles , Saccharomyces cerevisiae , 1-Butanol , Citoesqueleto de Actina , Actinas/genética , Ácidos Grasos , Ingeniería Metabólica/métodos , Saccharomyces cerevisiae/genéticaRESUMEN
Human activities increase the concentration of atmospheric carbon dioxide (CO2), which leads to global climate warming. Microbial CO2 fixation is a promising green approach for carbon neutral. In contrast to autotrophic microorganisms, heterotrophic microorganisms are characterized by fast growth and ease of genetic modification, but the efficiency of CO2 fixation is still limited. In the past decade, synthetic biology-based enhancement of heterotrophic CO2 fixation has drawn wide attention, including the optimization of energy supply, modification of carboxylation pathway, and heterotrophic microorganisms-based indirect CO2 fixation. This review focuses on the research progress in CO2 fixation by heterotrophic microorganisms, which is expected to serve as a reference for peaking CO2 emission and achieving carbon neutral by microbial CO2 fixation.
Asunto(s)
Dióxido de Carbono , Biología Sintética , Ciclo del Carbono , Dióxido de Carbono/metabolismo , Procesos Heterotróficos , HumanosRESUMEN
BACKGROUND: Biomass formation and product synthesis decoupling have been proven to be promising to increase the titer of desired value add products. Optogenetics provides a potential strategy to develop light-induced circuits that conditionally control metabolic flux redistribution for enhanced microbial production. However, the limited number of light-sensitive proteins available to date hinders the progress of light-controlled tools. RESULTS: To address these issues, two optogenetic systems (TPRS and TPAS) were constructed by reprogramming the widely used repressor TetR and protease TEVp to expand the current optogenetic toolkit. By merging the two systems, a bifunctional optogenetic switch was constructed to enable orthogonally regulated gene transcription and protein accumulation. Application of this bifunctional switch to decouple biomass formation and shikimic acid biosynthesis allowed 35 g/L of shikimic acid production in a minimal medium from glucose, representing the highest titer reported to date by E. coli without the addition of any chemical inducers and expensive aromatic amino acids. This titer was further boosted to 76 g/L when using rich medium fermentation. CONCLUSION: The cost effective and light-controlled switch reported here provides important insights into environmentally friendly tools for metabolic pathway regulation and should be applicable to the production of other value-add chemicals.
RESUMEN
OBJECTIVES: This study aimed to develop an efficient enzymatic strategy for the industrial production of phenylpyruvate (PPA) from L-phenylpyruvic acid (L-Phe). RESULTS: L-amino acid deaminase from Proteus mirabilis was expressed in Escherichia coli BL21 (DE3) and modified to release product inhibition by employing conformational dynamics engineering. Based on structural analysis, two residues (E145/L341) were identified for reducing interactions between the product and enzyme and increasing flexibility of the protein, thereby facilitating the product release. The mutant M2E145A/E341A exhibited a 3.84-fold reduction in product inhibition and a 1.35-fold increase in catalytic efficiency in comparison to the wild type. Finally, 81.2 g/L PPA production with a conversion of 99.6% was obtained in a 5-L bioreactor. CONCLUSIONS: The engineered catalyst can significantly reduce product inhibition and facilitate the effective industrial synthesis of PPA.
Asunto(s)
Aminoácidos , Proteus mirabilis , Aminoácidos/metabolismo , Escherichia coli/metabolismo , Ácidos Fenilpirúvicos/metabolismo , Proteus mirabilis/genéticaRESUMEN
Microbial cell factories using a single carbon source (e.g., sugars) have been used to produce a wide variety of chemicals. However, this process is often accompanied by stoichiometric constraints on carbons and redox cofactors. Here, a synthetic pathway was designed and constructed in Escherichia coli to synergistically use glucose and formate as mixed carbon sources. By optimizing this synthetic pathway via enzyme mining, protein engineering, and bioprocess approaches, the yield of pyruvate from glucose was enhanced to 94% of the theoretical glycolysis yield, reaching 1.88 mol/mol. Finally, the optimized synthetic pathway was integrated with a phosphite reductase-based NADH regeneration system in malate-producing E. coli, resulting in the conversion of glucose into l-malate with a high yield of up to 1.65 mol/mol. This synergistic carbon metabolism strategy can be used to establish carbon- and energy-efficient productive processes.
Asunto(s)
Escherichia coli , Ingeniería Metabólica , Escherichia coli/metabolismo , Formiatos/metabolismo , Glucosa/metabolismo , Ingeniería Metabólica/métodos , Ácido Pirúvico/metabolismoRESUMEN
Tryptophan, an essential aromatic amino acid, is widely used in animal feed, food additives, and pharmaceuticals. Although sustainable and environmentally friendly, microbial tryptophan production from renewable feedstocks is limited by low biosynthesis and transport rates. Here, an Escherichia coli strain capable of efficient tryptophan production was generated by improving and balancing the supply of precursors and by engineering membrane transporters. Tryptophan biosynthesis was increased by eliminating negative regulatory factors, blocking competing pathways, and preventing tryptophan degradation. Promoter engineering balanced the supply of the precursors erythrose-4-phosphate and phosphoenolpyruvate, as well as the availability of serine. Finally, the engineering of tryptophan transporters prevented feedback inhibition and growth toxicity. Fed-batch fermentation of the final strain (TRP12) in a 5 L bioreactor produced 52.1 g·L-1 of tryptophan, with a yield of 0.171 g·g-1 glucose and productivity of 1.45 g·L-1 ·h-1 . The metabolic engineering strategy described here paves the way for high-performance microbial cell factories aimed at the production of tryptophan as well as other valuable chemicals.
Asunto(s)
Proteínas de Escherichia coli , Escherichia coli , Escherichia coli/genética , Escherichia coli/metabolismo , Proteínas de Escherichia coli/genética , Proteínas de Escherichia coli/metabolismo , Fermentación , Ingeniería Metabólica , Triptófano/metabolismoRESUMEN
Saccharomyces cerevisiae is an attractive chassis for the production of medium-chain fatty acids, but the toxic effect of these compounds often prevents further improvements in titer, yield, and productivity. To address this issue, Lem3 and Sfk1 were identified from adaptive laboratory evolution mutant strains as membrane asymmetry regulators. Co-overexpression of Lem3 and Sfk1 [Lem3(M)-Sfk1(H) strain] through promoter engineering remodeled the membrane phospholipid distribution, leading to an increased accumulation of phosphatidylethanolamine in the inner leaflet of the plasma membrane. As a result, membrane potential and integrity were increased by 131.5% and 29.2%, respectively; meanwhile, the final OD600 in the presence of hexanoic acid, octanoic acid, and decanoic acid was improved by 79.6%, 73.4%, and 57.7%, respectively. In summary, this study shows that membrane asymmetry engineering offers an efficient strategy to enhance medium-chain fatty acids tolerance in S. cerevisiae, thus generating a robust industrial strain for producing high-value biofuels.
Asunto(s)
Adaptación Biológica/genética , Membrana Celular , Ácidos Grasos/metabolismo , Ingeniería Metabólica/métodos , Saccharomyces cerevisiae , Biocombustibles , Membrana Celular/química , Membrana Celular/genética , Membrana Celular/metabolismo , Saccharomyces cerevisiae/citología , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/fisiologíaRESUMEN
Chloroplasts evolved from a free-living cyanobacterium through endosymbiosis. Similar to bacterial cell division, chloroplasts replicate by binary fission, which is controlled by the Minicell (Min) system through confining FtsZ ring formation at the mid-chloroplast division site. MinD, one of the most important members of the Min system, regulates the placement of the division site in plants and works cooperatively with MinE, ARC3, and MCD1. The loss of MinD function results in the asymmetric division of chloroplasts. In this study, we isolated one large dumbbell-shaped and asymmetric division chloroplast Arabidopsis mutant Chloroplast Division Mutant 75 (cdm75) that contains a missense mutation, changing the arginine at residue 49 to a histidine (R49H), and this mutant point is located in the N-terminal Conserved Terrestrial Sequence (NCTS) motif of AtMinD1, which is only typically found in terrestrial plants. This study provides sufficient evidence to prove that residues 1-49 of AtMinD1 are transferred into the chloroplast, and that the R49H mutation does not affect the function of the AtMinD1 chloroplast transit peptide. Subsequently, we showed that the point mutation of R49H could remove the punctate structure caused by residues 1-62 of the AtMinD1 sequence in the chloroplast, suggesting that the arginine in residue 49 (Arg49) is essential for localizing the punctate structure of AtMinD11 - 62 on the chloroplast envelope. Unexpectedly, we found that AtMinD1 could interact directly with ARC6, and that the R49H mutation could prevent not only the previously observed interaction between AtMinD1 and MCD1 but also the interaction between AtMinD1 and ARC6. Thus, we believe that these results show that the AtMinD1 NCTS motif is required for their protein interaction. Collectively, our results show that AtMinD1 can guide the placement of the division site to the mid chloroplast through its direct interaction with ARC6 and reveal the important role of AtMinD1 in regulating the AtMinD1-ARC6 interaction.