Alveolar bone retention following treatment of dilacerated labial inversely impacted maxillary central incisors-a retrospective study.

The root of late-dental-age labial inversely impacted maxillary central incisors (LIIMCIs) typically develops to severe dilacerated morphology. Therefore, reliable posttreatment periodontal estimates of orthodontic treatment prognosis would be critical to the treatment value of impacted incisors. This study aims to analyze further changes in dimensions of the alveolar bone following the closed-eruption treatment of late-dental-age dilacerated LIIMCIs. Cone beam computed tomography (CBCT) scanning data of 16 patients with unilateral dilacerated late-dental-age LIIMCIs were collected, including the pretreatment (T1) and at the 2.23 ± 0.78 years follow-up stage (T2) respectively. Patients underwent closed-eruption treatments to bring the impacted incisor into the dental arch. Dolphin imaging software was used to measure alveolar bone height labially, palatally, and proximally to the site at T1 and T2, as well as alveolar bone thicknesses at 0, 2, 4, 6 and 8 mm below the initial measurement plane (IMP). The alveolar bone heights on the impacted and contralateral sides increased from T1 to T2 (p < 0.05). Alveolar bone growth on both sides had no significant difference. In T2, the mean values of labial and distal alveolar heights on the contralateral sides were greater than on the impacted sides (p < 0.05). The mean values of total alveolar bone thicknesses on the impacted sides in T1 were significantly smaller than those on the contralateral sides in IMP-0, 2, 4, 6, 8 (p < 0.05). The total thicknesses on the impacted sides in T2 increased and were significantly greater than on the contralateral sides (p < 0.05), except for the thickness in IMP-0. The closed-eruption treatment of dilacerated late-dental-age LIIMCIs results in no significant changes to alveolar bone height, except on the labial and distal sides, with increased alveolar bone thickness, suggesting that this approach may be viable first choice therapy for non-extraction orthodontic cases.

Enantiomer-Dependent Supramolecular Immunosuppressive Modulation for Tissue Reconstruction.

Modulating the properties of biomaterials in terms of the host immune response is critical for tissue repair and regeneration. However, it is unclear how the preference for the cellular microenvironment manipulates the chiral immune responses under physiological or pathological conditions. Here, we reported that in vivo and in vitro oligopeptide immunosuppressive modulation was achieved by manipulation of macrophage polarization using chiral tetrapeptide (Ac-FFFK-OH, marked as FFFK) supramolecular polymers. The results suggested that chiral FFFK nanofibers can serve as a defense mechanism in the restoration of tissue homeostasis by upregulating macrophage M2 polarization via the Src-STAT6 axis. More importantly, transiently acting STAT6, insufficient to induce a sustained polarization program, then passes the baton to EGR2, thereby continuously maintaining the M2 polarization program. It is worth noting that the L-chirality exhibits a more potent effect in inducing macrophage M2 polarization than does the D-chirality, leading to enhanced tissue reconstruction. These findings elucidate the crucial molecular signals that mediate chirality-dependent supramolecular immunosuppression in damaged tissues while also providing an effective chiral supramolecular strategy for regulating macrophage M2 polarization and promoting tissue injury repair based on the self-assembling chiral peptide design.

Factors affecting local alveolar bone thickness in unilateral maxillary canine-lateral incisor transposition.

INTRODUCTION: This study aimed to use 3-dimensional data to investigate the factors affecting local alveolar bone thickness in unilateral maxillary canine-lateral incisor transposition. METHODS: Pretreatment cone-beam computed tomography data of 34 patients with unilateral maxillary canine-lateral transposition were imported into Dolphin Imaging software (version 11.8; Dolphin Imaging and Management Solutions, Chatsworth, Calif) for 3-dimensional reconstruction. The age, gender, and type of transposition at the beginning of treatment were recorded. The thickness and height of the transposed canine, the labiopalatal and distomedial distance from the transposed canine to the apex of the lateral incisor, the inclination of the transposed lateral incisor, the apical height of the lateral incisor, and the alveolar bone thickness in the apical plane were measured. Multiple linear regression analyses were applied to investigate the factors affecting alveolar bone thickness in the apical plane of the transposed lateral incisor. Two sample t test were applied to assess the difference of alveolar bone thickness in patients of different ages. RESULTS: The 10 boys and 24 girls had a mean age of 12.26 ± 2.34 years. In all 34 participants, the apical alveolar bone thickness of transposed lateral incisors was significantly higher than that of the unaffected side (P <0.05). Based on multiple regression analyses, factors associated with a wider alveolar bone thickness were as follows: age (ß = -0.237; P = 0.008), the labiopalatal distance from the transposed canine to the apex of the lateral incisor (ß = 0.675; P <0.001), and the inclination of the transposed lateral incisor (ß = 0.048; P = 0.032). Patients aged <11 years had significantly thicker alveolar bone than that of patients aged >11 years (P <0.05). CONCLUSIONS: Patients with younger age, greater lateral incisor inclination, and greater labiopalatal distance between canine and lateral incisor had more alveolar bone thickness. Early treatment permits tooth movement within the thicker alveolar bone.

Metal-Phenolic Network with Pd Nanoparticle Nodes Synergizes Oxidase-Like and Photothermal Properties to Eradicate Oral Polymicrobial Biofilm-Associated Infections.

Designing an effective treatment strategy to combat oral diseases caused by complex polymicrobial biofilms remains a great challenge. Herein, a series of metal-phenolic network with Pd nanoparticle nodes using polyphenols as stabilizers and reducing agents is constructed. Among them, sulfonated lignin-Pd (SLS-Pd) with ultrafine size palladium nanoparticles and broadband near infrared absorption exhibit excellent oxidase-like activity and stable photothermal effect. In vitro experiments demonstrate that the superoxide radical generated by SLS-Pd oxidase-like activity exhibits selective antibacterial effects, while its photothermal effect induced hyperthermia exhibits potent antifungal properties. This difference is further elucidated by RNA-sequencing analysis and all-atom simulation. Moreover, the SLS-Pd-mediated synergistic antimicrobial system exhibits remarkable efficacy in combating various biofilms and polymicrobial biofilms. By establishing a root canal model and an oropharyngeal candidiasis model, the feasibility of the synergistic antimicrobial system in treating oral biofilm-related infections is further validated. This system provides a promising therapeutic approach for polymicrobial biofilm-associated infections in the oral cavity.

Evaluation of two treatment concepts of four implants supporting fixed prosthesis in an atrophic maxilla: finite element analysis.

BACKGROUND: Currently, oblique placement of long implants or the use of short implants to circumvent the maxillary sinus area and provide support for fixed prostheses are viable alternatives. The purpose of this study was to compare these two treatment concepts and ascertain which one exhibits superior biomechanical characteristics. METHODS: Two different treatment concept models were constructed. The first one, LT4I, consisting of two mesial vertical implants positioned in lateral incisor regions and two distal tilted implants (45°) situated in second premolar regions of the maxilla. The second model, VS4I, includes two mesial vertical implants in lateral incisor regions and two vertically positioned short implants in second premolar regions. Numerical simulations were conducted under three loading types: firstly, oblique forces upon the molars; secondly, vertical forces upon the molars; thirdly, oblique forces upon the incisors. The maximum principal stress (σmax) and minimum principal stress (σmin) of the bone, as well as von Mises stress of the implants, were calcuated. RESULTS: Under oblique loading on the molar, higher stress values in the bone were observed in LT4I group. Under vertical loading on molar, higher stress values in the bone were also observed in LT4I group. Furthermore, little difference was found between the two groups under oblique loading on the incisor. CONCLUSION: Both treatment concepts can be applicable for edentulous individuals with moderate atrophic maxilla. Compared to tilted implants, short implants can transmit less occlusal force to the supporting tissues.

Functionalized MoS2-nanosheets with NIR-Triggered nitric oxide delivery and photothermal activities for synergistic antibacterial and regeneration-promoting therapy.

Bacterial infection in skin and soft tissue has emerged as a critical concern. Overreliance on antibiotic therapy has led to numerous challenges, including the emergence of multidrug-resistant bacteria and adverse drug reactions. It is imperative to develop non-antibiotic treatment strategies that not only exhibit potent antibacterial properties but also promote rapid wound healing and demonstrate biocompatibility. Herein, a novel multimodal synergistic antibacterial system (SNO-CS@MoS2) was developed. This system employs easily surface-modified thin-layer MoS2 as photothermal agents and loaded with S-nitrosothiol-modified chitosan (SNO-CS) via electrostatic interactions, thus realizing the combination of NO gas therapy and photothermal therapy (PTT). Furthermore, this surface modification renders SNO-CS@MoS2 highly stable and capable of binding with bacteria. Through PTT's thermal energy, SNO-CS@MoS2 rapidly generates massive NO, collaborating with PTT to achieve antibacterial effects. This synergistic therapy can swiftly disrupt the bacterial membrane, causing protein leakage and ATP synthesis function damage, ultimately eliminating bacteria. Notably, after effectively eliminating all bacteria, the residual SNO-CS@MoS2 can create trace NO to promote fibroblast migration, proliferation, and vascular regeneration, thereby accelerating wound healing. This study concluded that SNO-CS@MoS2, a novel multifunctional nanomaterial with outstanding antibacterial characteristics and potential to promote wound healing, has promising applications in infected soft tissue wound treatment.

An Immunomodulatory Hydrogel by Hyperthermia-Assisted Self-Cascade Glucose Depletion and ROS Scavenging for Diabetic Foot Ulcer Wound Therapeutics.

Current therapeutic protocols for diabetic foot ulcers (DFUs), a severe and rapidly growing chronic complication in diabetic patients, remain nonspecific. Hyperglycemia-caused inflammation and excessive reactive oxygen species (ROS) are common obstacles encountered in DFU wound healing, often leading to impaired recovery. These two effects reinforce each other, forming an endless loop. However, adequate and inclusive methods are still lacking to target these two aspects and break the vicious cycle. This study proposes a novel approach for treating DFU wounds, utilizing an immunomodulatory hydrogel to achieve self-cascade glucose depletion and ROS scavenging to regulate the diabetic microenvironment. Specifically, AuPt@melanin-incorporated (GHM3) hydrogel dressing is developed to facilitate efficient hyperthermia-enhanced local glucose depletion and ROS scavenging. Mechanistically, in vitro/vivo experiments and RNA sequencing analysis demonstrate that GHM3 disrupts the ROS-inflammation cascade cycle and downregulates the ratio of M1/M2 macrophages, consequently improving the therapeutic outcomes for dorsal skin and DFU wounds in diabetic rats. In conclusion, this proposed approach offers a facile, safe, and highly efficient treatment modality for DFUs.

Effects of Sulforaphene on the Cariogenic Properties of Streptococcus Mutans In Vitro and Dental Caries Development In Vivo.

Sulforaphene (SFE) is a common nutritional supplement with antibacterial, anti-cancer, and anti-inflammatory effects. However, the effects of SFE on the cariogenicity of Streptococcus mutans and dental caries have not been reported. The objectives of this study were to investigate the caries-controlling potential of SFE. The effects of SFE on S. mutans were investigated using the broth microdilution method, crystal violet staining, SEM observation, acid tolerance assays, lactic acid quantification, and polysaccharide measurements. A rat caries model was established to evaluate the caries-controlling effects and biocompatibility of SFE in vivo. SFE inhibited S. mutans growth and biofilm formation. Furthermore, SFE restrained the cariogenic properties of S. mutans, including its acid production, acid tolerance, and extracellular polysaccharide production, without affecting the bacterial viability at sub-inhibitory levels. In the rat caries model, SFE significantly arrested the onset and development of dental caries. Moreover, no visible hemolytic phenomenon or cytotoxicity was detected in the SFE groups. After four weeks of SFE treatment, all rats remained in apparent good health with no significant differences in weight gain; their hemogram and biochemical parameters were normal; no pathological changes were observed in the oral mucosa, liver, or kidneys. In conclusion, SFE was safe and inhibited the development of caries effectively.

Morphometric evaluation of alveolar bone after orthodontic treatment of multiple impacted teeth in the unilateral maxillary anterior region.

INTRODUCTION: This study aimed to investigate the height and thickness of alveolar bone by cone-beam computed tomography imaging after orthodontic treatment in the unilateral maxillary anterior region and speculate on reasons for the difference in alveolar bone morphology. METHODS: This study selected 11 patients (3 males and 8 females; mean age, 9.42 ± 1.45 years). Cone-beam computed tomography was performed for these 11 patients before and after treatment using Dolphin Imaging software (Dolphin Imaging and Management Solutions, Chatsworth, Calif). Labial and palatal alveolar bone thickness (BT) at root apices and different levels along the roots and loss of alveolar bone height was measured for each impacted tooth and its contralateral homonymous tooth. RESULTS: After orthodontic therapy, all 3 impacted anterior teeth had different degrees of loss of labial alveolar bone height compared with the normal side (central incisor: -1.5 mm, P <0.005; lateral incisor: -1.06 mm, P <0.01; canine: -0.59 mm, P < 0.01). The lateral incisors also showed palatal alveolar bone height loss compared with the unaffected side (-0.8 mm, P <0.005). Alveolar BT at root apices of impacted canines was 1.14 mm thicker than the normal side (P <0.005). Central and lateral incisors were similar to the normal side. The thickness of the alveolar bone at 8, 10, and 12 mm of the impacted canine position was still larger than that on the healthy side, whereas the difference in average thickness between the healthy and affected side had been significantly reduced compared with pretreatment measurements. CONCLUSIONS: There is satisfactory retention of alveolar bone height in canines after orthodontic treatment; however, alveolar bone loss is slightly worse at central and lateral incisors. Retention of alveolar BT was normal for impacted anterior teeth, whereas excess apical alveolar BT at the canines, although still present, was substantially less significant than had been observed before treatment.

Supramolecular Photothermal Cascade Nano-Reactor Enables Photothermal Effect, Cascade Reaction, and In Situ Hydrogelation for Biofilm-Associated Tooth-Extraction Wound Healing.

Due to the emergence of drug resistance in bacteria and biofilm protection, achieving a satisfactory therapeutic effect for bacteria-infected open wounds with conventional measures is problematic. Here, a photothermal cascade nano-reactor (CPNC@GOx-Fe2+ ) is constructed through a supramolecular strategy through hydrogen bonding and coordination interactions between chitosan-modified palladium nano-cube (CPNC), glucose oxidase (GOx), and ferrous iron (Fe2+ ). CPNC@GOx-Fe2+ exhibits excellent photothermal effects and powers the GOx-assisted cascade reaction to generate hydroxyl radicals, enabling photothermal and chemodynamic combination therapy against bacteria and biofilms. Further proteomics, metabolomics, and all-atom simulation results indicate that the damage of the hydroxyl radical to the function and structure of the cell membrane and the thermal effect enhance the fluidity and inhomogeneity of the bacterial cell membrane, resulting in the synergistic antibacterial effect. In the biofilm-associated tooth extraction wound model, the hydroxyl radical generated from the cascade reaction process can initiate the radical polymerization process to form a hydrogel in situ for wound protection. In vivo experiments confirm that synergistic antibacterial and wound protection can accelerate the healing of infected tooth-extraction wounds without affecting the oral commensal microbiota. This study provides a way to propose a multifunctional supramolecular system for the treatment of open wound infection.

The evaluation of lateral incisor adjacent to treated labial inversely impacted maxillary central incisor: A retrospective follow-up study.

INTRODUCTION: This retrospective study aimed to evaluate the further development of the lateral incisor and its associated periodontium adjacent to the treated labial inversely impacted maxillary central incisor. METHODS: We enrolled 23 participants (average age, 8.24 ± 1.43 years) undergoing a mean follow-up period of 31.10 ± 13.05 months. Each participant had an unimpacted lateral incisor and a successfully treated unilateral labial inversely impacted maxillary central incisor. The contralateral lateral incisors served as controls. Cone-beam computed tomography data were available for treatment completion and follow-up stages. The variables (including root length, dental age, root canal width, root-crown angulation, and alveolar bone loss and thickness) were evaluated with Dolphin Imaging software (version 11.95; Dolphin Imaging and Management Solutions, Chatsworth, Calif). RESULTS: At the follow-up stage, the lateral incisors in the impacted side had significantly longer root lengths, smaller root canal widths, and thinner labial bone widths at the apex than at the posttreatment stage (P <0.001, P = 0.036, and P = 0.001, respectively). A significant lateral incisor root length reduction was noted when comparing the impacted and contralateral sides, although no variation was observed in root canal width. Similarly, crown-root angulation of the lateral incisor on the impacted side was significantly larger than that of the contralateral lateral incisor. The lateral incisor on the impacted side also had thicker labial and thinner lingual bone widths at the apex than the contralateral lateral incisor. CONCLUSIONS: The lateral incisor adjacent to the successfully treated labial inversely impacted maxillary central incisor showed continuous growth during follow-up stages, exhibiting a similar morphology and alveolar bone quality but shorter root length, larger root angulation, and thinner lingual bone width at the apex than those of the contralateral lateral incisors.

The CuO and AgO co-modified ZnO nanocomposites for promoting wound healing in Staphylococcus aureus infection.

Bacterial has become a common pathogen of humans owing to their drug-resistant effects and evasion of the host immune system, with their ability to form biofilm and induce severe infections, a condition which has become a primary public health concern globally. Herein, we report on CuO@AgO/ZnO NPs antibacterial activity enhanced by near-infrared (NIR) light which was effective in the elimination of Staphylococcus aureus and the Pseudomonas aeruginosa. The CuO@AgO/ZnO NPs under NIR significantly eradicated S. aureus and its biofilm and P. aeruginosa in vitro, and subsequently exhibited such phenomenon in vivo, eliminating bacteria and healing wound. This demonstrated the combined intrinsic antibacterial potency of the Cu and Ag components of the CuO@AgO/ZnO NPs was enhanced tremendously to achieve such outcomes in vitro and in vivo. Considering the above advantages and facile preparation methods, the CuO@AgO/ZnO NPs synthesized in this work may prove as an important antibacterial agent in bacterial-related infection therapeutics and for biomedical-related purposes.

Neighboring Carboxylic Acid Boosts Peroxidase-Like Property of Metal-Phenolic Nano-Networks in Eradicating Streptococcus mutans Biofilms.

Developing nature-inspired nanomaterials with enzymatic activity is essential in combating bacterial biofilms. Here, it is reported that incorporating the carboxylic acid in phenolic/Fe nano-networks can efficiently manipulate their peroxidase-like activity via the acidic microenvironment and neighboring effect of the carboxyl group. The optimal gallic acid/Fe (GA/Fe) nano-networks demonstrate highly enzymatic activity in catalyzing H2 O2 into oxidative radicals, damaging the cell membrane and extracellular DNA in Streptococcus mutans biofilms. Theoretical calculation suggests that the neighboring carboxyl group can aid the H2 O2 adsorption, free radical generation, and catalyst reactivation, resulting in superb catalytic efficiency. Further all-atom simulation suggests the peroxidation of lipids can increase the cell membrane fluidity and permeability. Also, GA/Fe nano-networks show great potential in inhibiting tooth decay and treating other biofilm-associated diseases without affecting the commensal oral flora. This strategy provides a facile and scale-up way to prepare the enzyme-like materials and manipulate their enzymatic activity for biomedical applications.

The position and morphology characteristics of multiple impacted anterior teeth in the unilateral maxillary area: A retrospective study based on cone-beam computed tomography.

INTRODUCTION: This study investigated the position and morphologic characteristics of multiple impacted anterior teeth in the unilateral maxillary area. METHODS: Cone-beam computed tomography images of 21 patients (11 males and 10 females; median age 9.42 years [9.08-11.29]) with multiple teeth impacted were collected and imported into Dolphin Imaging software (Dolphin Imaging and Management Solutions, Chatsworth, Calif). The vertical height, crown orientation, twist direction, and root curvature of each impacted tooth were described. The crown length, root length, and root canal width of impacted and homonym teeth were measured. RESULTS: The positions of the impacted lateral incisors are lower than that of the other 2 anterior teeth. Most crowns of impacted central incisors are positioned distally, labial surfaces in mesial torsion, with most roots, bent toward the distal and labial. Crowns of impacted lateral incisors are positioned mesiolabially, with labial surfaces mostly in distal torsion, and most roots bent toward the mesial and labial. Crowns of impacted canines are mostly positioned mesiolabially, with labial surfaces in mesial torsion. The crowns and roots of the impacted central and lateral incisors were shorter than those of the homonym (P <0.05); however, the difference in crown length is clinically negligible, and there was no difference in root canal widths. There was no difference in the comparison of parameters for the canine group. CONCLUSIONS: There are certain rules in the vertical height, crown orientation, twist direction, and root curvature of multiple impacted anterior teeth in the unilateral maxillary area. Root development of impacted central and lateral incisors was restricted.

Mendelian randomization supports the causal role of fasting glucose on periodontitis.

Purpose: The effect of hyperglycemia on periodontitis is mainly based on observational studies, and inconsistent results were found whether periodontal treatment favors glycemic control. The two-way relationship between periodontitis and hyperglycemia needs to be further elucidated. This study aims to evaluate the causal association of periodontitis with glycemic traits using bi-directional Mendelian randomization (MR) approach. Methods: Summary statistics were sourced from large-scale genome-wide association study conducted for fasting glucose (N = 133,010), HbA1c (N = 123,665), type 2 diabetes (T2D, N = 659,316), and periodontitis (N = 506,594) among European ancestry. The causal relationship was estimated using the inverse-variance weighted (IVW) model and further validated through extensive complementary and sensitivity analyses. Results: Overall, IVW showed that a genetically higher level of fasting glucose was significantly associated with periodontitis (OR = 1.119; 95% CI = 1.045-1.197; PFDR= 0.007) after removing the outlying instruments. Such association was robust and consistent through other MR models. Limited evidence was found suggesting the association of HbA1C with periodontitis after excluding the outliers (IVW OR = 1.123; 95% CI = 1.026-1.229; PFDR= 0.048). These linkages remained statistically significant in multivariate MR analyses, after adjusting for body mass index. The reverse direction MR analyses did not exhibit the causal association of genetic liability to periodontitis with any of the glycemic trait tested. Conclusions: Our MR study reaffirms previous findings and extends evidence to substantiate the causal effect of hyperglycemia on periodontitis. Future studies with robust genetic instruments are needed to confirm the causal association of periodontitis with glycemic traits.

Mild Hyperthermia-Assisted ROS Scavenging Hydrogels Achieve Diabetic Wound Healing.

Excessive reactive oxygen species (ROS) production induces oxidative damage to biomolecules, which can lead to the development of chronic diseases. Biocompatible hydrogel antioxidants composed of natural materials, such as polysaccharides and polyphenols, are of significant option for ROS scavenging. However, rapidly achieving hydrogel antioxidants with convenient, economical, safe, and efficient features remains challenging. Herein, facile synthesis of a physically cross-linked polyphenol/polysaccharide hydrogel by introducing tannic acid microsize particles (TAMP) into a cationic guar gum (CG) matrix is reported. Combining antioxidant/photothermal properties of TAMP and mechanical support from injectable CG, the formulated TAMP/CG is explored for treating diabetic wounds. Both in vitro and in vivo assays verify that TAMP/CG can protect the cells from ROS-induced oxidative damage, which can also be strengthened by the local photothermal heating (42 °C) triggered by near-infrared light. Overall, this study establishes the paradigm of enhanced diabetic wound healing by mild hyperthermia-assisted ROS scavenging hydrogels.

Mendelian randomization highlights the causal association of obesity with periodontal diseases.

AIM: The underlying mechanisms connecting obesity and periodontal diseases remain unclear. This study investigates the potential causal association of obesity with periodontal diseases using Mendelian randomization (MR). MATERIALS AND METHODS: Single-nucleotide polymorphisms of obesity traits including body mass index (BMI), waist circumference (WC), and WC adjusted for BMI (WCadjBMI) from large-scale genome-wide association studies were screened for instrumental variables. The single trait periodontitis and the combined trait comprising periodontitis and loose teeth were adopted as surrogates for periodontal diseases. Inverse-variance weighted (IVW), series of sensitivity analyses and multivariable MR were employed to determine the association of obesity with periodontal diseases. RESULTS: IVW results showed that per 1-SD increment in BMI (odds ratio, OR = 1.115; 95% confidence interval [CI] = 1.064-1.169; p < .001) and WC (OR = 1.117; 95% CI = 1.052-1.185; p < .001), but not WCadjBMI, were significantly associated with an increased risk of periodontitis/loose teeth. Moreover, the MR estimates were consistent across other MR sensitivity analyses and multivariable MR. However, a causal association of obesity with the single trait periodontitis was not identified. CONCLUSIONS: The presented evidence supports previous epidemiological findings by showing a potential causal association of genetic liability to obesity with periodontal diseases. The biological mechanisms underlying this association warrant further investigation.

The relationship between local alveolar bone housing and size of canine in maxillary canine-lateral incisor transposition: A retrospective cone-beam computed tomography-based study.

INTRODUCTION: This study aimed to use 3-dimensional data to analyze the relationship between local alveolar bone housing and canine size in maxillary canine-lateral incisor transposition. METHODS: Cone-beam computed tomography study data from 31 patients with maxillary canine-lateral incisor transposition were imported into Dolphin Imaging software (version 11.8; Dolphin Imaging and Management Solutions, Chatsworth, Calif) for measurement. The buccal and palatal alveolar thickness of lateral incisor roots at different heights, the maximal thickness of displaced canine, and canine height were measured. Alveolar height-thickness variation curves at the lateral incisor region and maximal thickness of displaced canine were plotted to calculate the appropriate theoretical minimum alveolar heights of total alveolar housing, buccal alveolar housing after concentrating the bone buccally (TMAH-B1), and original buccal alveolar housing (TMAH-B2) required for correcting the transposition of 2 teeth. RESULTS: Canines could only be moved distally above lateral incisors in 5 patients. The mean value of theoretical minimum alveolar heights of total alveolar housing was 14.57 ± 1.75 mm. It was possible to reposition canines distally by concentrating the alveolar bone buccally in the remaining 26 patients. The mean value of TMAH-B1 was 10.86 ± 3.70 mm. Canines could be repositioned distally directly over the buccal aspect of the lateral incisor in 17 patients. The mean value of TMAH-B2 was 9.30 ± 2.35 mm. Canine height was greater than TMAH-B1 in 18 patients; however, only 10 patients were greater than TMAH-B2. CONCLUSIONS: Correction of transposition was difficult in some patients because of the lack of alveolar bone housing. Repositioning was possible when the height of the canine was higher than a certain height. An accurate assessment of the relationship between alveolar housing and tooth size is recommended.

A Vehicle-Free Antimicrobial Polymer Hybrid Gold Nanoparticle as Synergistically Therapeutic Platforms for Staphylococcus aureus Infected Wound Healing.

Pathogenic bacteria infection is a serious threat to human public health due to the high morbidity and mortality rates. Nano delivery system for delivering antibiotics provides an alternative option to improve the efficiency compared to conventional therapeutic agents. In addition to the drug loading capacity of nanocarriers, which is typically around 10%, further lowers the drug dose that pathological bacteria are exposed to. Moreover, nanocarriers that are not eliminated from the body may cause side effects. These limitations have motivated the development of self-delivery systems that are formed by the self-assembly of different therapeutic agents. In this study, a vehicle-free antimicrobial polymer polyhexamethylene biguanide (PHMB, with bactericidal and anti-biofilm functions) hybrid gold nanoparticle (Au NPs, with photothermal therapy (PTT)) platform (PHMB@Au NPs) is developed. This platform exhibits an excellent synergistic effect to enhance the photothermal bactericidal effect for Staphylococcus aureus under near-infrared irradiation. Furthermore, the results showed that PHMB@Au NPs inhibit the formation of biofilms, quickly remove bacteria to promote wound healing through PTT in infection model in vivo, and even mediate the transition of macrophages from M1 to M2 type, and accelerate tissue angiogenesis. PHMB@Au NPs will have promising value as highly effective antimicrobial agents for patient management.

Assessing the drug resistance profiles of oral probiotic lozenges.

BACKGROUND: Probiotic lozenges have been developed to harvest the benefits of probiotics for oral health, but their long-term consumption may encourage the transfer of resistance genes from probiotics to commensals, and eventually to disease-causing bacteria. AIM: To screen commercial probiotic lozenges for resistance to antibiotics, characterize the resistance determinants, and examine their transferability in vitro. RESULTS: Probiotics of all lozenges were resistant to glycopeptide, sulfonamide, and penicillin antibiotics, while some were resistant to aminoglycosides and cephalosporins. High minimum inhibitory concentrations (MICs) were detected for streptomycin (>128 µg/mL) and chloramphenicol (> 512 µg/mL) for all probiotics but only one was resistant to piperacillin (MIC = 32 µg/mL). PCR analysis detected erythromycin (erm(T), ermB or mefA) and fluoroquinolone (parC or gyr(A)) resistance genes in some lozenges although there were no resistant phenotypes. The dfrD, cat-TC, vatE, aadE, vanX, and aph(3")-III or ant(2")-I genes conferring resistance to trimethoprim, chloramphenicol, quinupristin/dalfopristin, vancomycin, and streptomycin, respectively, were detected in resistant probiotics. The rifampicin resistance gene rpoB was also present. We found no conjugal transfer of streptomycin resistance genes in our co-incubation experiments. CONCLUSION: Our study represents the first antibiotic resistance profiling of probiotics from oral lozenges, thus highlighting the health risk especially in the prevailing threat of drug resistance globally.