RESUMEN
Background: Pulmonary infarction (PI) is an uncommon complication of pulmonary embolism (PE). The risk factors of PI are still relatively unclear. Methods: This was a single-center retrospective review conducted on 500 patients with PE. After applying the inclusion and exclusion criteria, 386 patients diagnosed with PE were enrolled in our study. These patients were then categorized into the PI group (n=64) and the non-PI group (n=322). A comparison was conducted between the two groups regarding the clinical characteristics. Results: The occurrence of PI secondary to PE was 16.58%. In univariate analysis, recent trauma (21.9% vs. 9.9%, P=0.007), pleuritic chest pain (46.9% vs. 17.4%, P<0.001), hemoptysis (29.7% vs. 2.5%, P<0.001), fever (26.6% vs. 8.1%, P<0.001), lower limb edema/pain (37.5% vs. 14.0%, P<0.001), white blood cell (WBC) counts (37.5% vs. 24.5%, P=0.032), C-reactive protein (CRP) (65.6% vs. 41.3%, P<0.001), and pleural effusion (45.3% vs. 18.6%, P<0.001) were associated with an increased risk of PI. Multivariate analysis demonstrated that age [odds ratio (OR) 0.975, 95% confidence interval (CI): 0.951-0.999, P=0.045], pleuritic chest pain (OR 2.878, 95% CI: 1.424-5.814, P=0.003), hemoptysis (OR 10.592, 95% CI: 3.503-32.030, P<0.001), lower limb edema/pain (OR 2.778, 95% CI: 1.342-5.749, P=0.006) and pleural effusion (OR 3.127, 95% CI: 1.531-6.388, P=0.002) were independent factors of PI due to PE. No significant difference was recorded between the two groups in treatment and mortality. Conclusions: Young patients were found to be a higher risk of PI. Pleural effusion was found to be a factor for PI. PI should be considered when pleuritic chest pain, hemoptysis, or lower limb edema/pain are present with peripheral opacity.
RESUMEN
BACKGROUND: Short-stem hip arthroplasty (SHA) is characterized by metaphyseal load transfer that effectively preserves the bone stock, but still suffers from stress shielding in the proximal femur. We designed a tension screw to mimic tension trabeculae in the new bionic collum femoris preserving (BCFP) short stem for bionic reconstruction, aiming to restore the biomechanics of hip joint. METHODS: Native femur finite element model was constructed to investigate the biomechanics of hip joint based on computed tomography (CT) data. The maximum absolute principal stress/strain cloud chart allowed the direction of stress/strain to be assessed. Six BCFP models with different screw angles (5°, 10°, 15°, 20°, 25°, and 30°) and the Corail model were created. The stress/strain distribution and overall stiffness were compared between each of the BCFP and Corail implanted models. RESULTS: The native model visualized the transfer pathways of tensile and compressive stress. The BCFP stems showed significantly higher stress and strain distribution in the greater trochanteric region compared to conventional total hip arthroplasty (THA). In particular, the BCFP-5° stem demonstrated the highest average strain in both medial and lateral regions and the overall stiffness was closest to the intact femur. CONCLUSIONS: Stress transfer pathways of trabecular architecture provide biomechanical insight that serves as the basis for bionic reconstruction. The tension screw improves load transfer pattern in the proximal femur and prevents stress reduction in the greater trochanteric region. The BCFP-5° stem minimizes the stress shielding effect and presents a more bionic mechanical performance.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Humanos , Artroplastia de Reemplazo de Cadera/métodos , Análisis de Elementos Finitos , Biónica , Fémur/diagnóstico por imagen , Fémur/cirugía , Fenómenos Biomecánicos , Estrés Mecánico , Diseño de PrótesisRESUMEN
BACKGROUND: We aimed to evaluate the biomechanical stiffness and strength of different internal fixation configurations and find suitable treatment strategies for low transcondylar fractures of the distal humerus. METHODS AND MATERIALS: Thirty 4th generation composite humeri were used to create low transcondylar fracture models that were fixed by orthogonal and parallel double plates as well as posterolateral plate and medial screw (PPMS) configurations (n=10 in each group) using an anatomical locking compression plate-screw system and fully threaded medial cortical screws. Posterior bending (maximum 50 N), axial loading (maximum 200 N) and internal rotation (maximum 10 N·m) were tested, in that order, for each specimen. Stiffness under different biomechanical settings among different configurations were compared. Another 18 sets of fracture models were created using these three configurations (n=6 in each group) and the load to failure under axial loading among different configurations was compared. RESULTS: Under posterior bending, the stiffness of parallel group was higher than orthogonal group (P<0.001), and orthogonal group was higher than PPMS group (P<0.001). Under axial loading, the stiffness of parallel group was higher than orthogonal group (P=0.001) and PPMS group (P<0.001); however, the difference between orthogonal and PPMS group was not statistically significant (P>0.05). Under internal rotation, the stiffness of parallel group was higher than orthogonal group (P=0.044), and orthogonal group was higher than PPMS group (P=0.029). In failure test under axial loading, the load to failure in the orthogonal group was lower than parallel group (P=0.009) and PPMS group (P=0.021), but the difference between parallel group and PPMS group was not statistically significant (P>0.05). All specimens in orthogonal group demonstrated "distal medial failure"; most specimens had "distal medial and trochlear failure" in the parallel group; most specimens exhibited "contact failure" in the PPMS group. CONCLUSION: For treating low transcondylar fractures, the overall stiffness and strength of the parallel configuration were superior to those of the orthogonal and PPMS configurations. Nevertheless, the PPMS configuration can provide adequate stability and stiffness comparable to double-plate configurations under axial loading. Therefore, the PPMS construct may have certain clinical value.
Asunto(s)
Fracturas del Húmero , Humanos , Fracturas del Húmero/cirugía , Fenómenos Biomecánicos , Húmero/cirugía , Fijación Interna de Fracturas/métodos , Placas ÓseasRESUMEN
PURPOSE: We built a joint replacement loosening model based on the original rabbit model of infection and evaluated the performance characteristics of 18F-FDG and 68 Ga-FAPI in evaluating infection and loosening. METHODS: After surgery, the rabbits were divided into four groups, with six individuals in the control group and 10 each in the aseptic loosening, S. aureus and S. epidermidis groups. PET/CT and serological examination were performed three times at two-week intervals. After the rabbits were euthanized, micro-CT, tissue pathology, pullout tests and scanning electron microscopy (SEM) were performed. RESULTS: The pullout test and SEM showed the feasibility of the aseptic loosening model. 18F-FDG showed similar performance in the control and loosening groups. The SUVmax of the S. aureus group was consistently higher than that of the S. epidermidis group. As for 68 Ga-FAPI, the SUVmax of the control group was lowest in the second week and gradually increased over subsequent weeks. The SUVmax of the loosening group began to exceed that of the control group after the second week. The SUVmax of the S. aureus group in the second week was the lowest among the four groups and increased as the number of weeks increased. The pathology results showed concordance with the performance of PET/CT. Linear regressions between SUVmax and serology showed that 18F-FDG was positively correlated with CRP and IL-6, while 68 Ga-FAPI revealed negative correlations with CRP and IL-6 in the second week and positive correlations in the sixth week. In addition, the SUVmax and MT(target)V of both 18F-FDG and 68 Ga-FAPI were negatively correlated with bone volume/trabecular volume (TV) and bone surface area/TV. CONCLUSION: In this longitudinal observation, 68 Ga-FAPI showed greater sensitivity than 18F-FDG in detecting diseases, and 68 Ga-FAPI had no intestinal or muscular uptake. The MT(target)V of 68 Ga-FAPI was larger than that of 18F-FDG, which meant that 68 Ga-FAPI had the potential to define the scope of lesions more accurately. Finally, the SUVmax of 68 Ga-FAPI could not differentiate between loosening and infection; further study of the diagnostic criteria is warranted.
Asunto(s)
Artritis Infecciosa , Infecciones Relacionadas con Prótesis , Animales , Fluorodesoxiglucosa F18 , Interleucina-6 , Tomografía Computarizada por Tomografía de Emisión de Positrones/métodos , Infecciones Relacionadas con Prótesis/diagnóstico por imagen , Infecciones Relacionadas con Prótesis/etiología , Conejos , Staphylococcus aureusRESUMEN
Stress shielding is an important factor in the internal fixation of a fracture. To explore the regularity of stress shielding in internal fixation, a simplified model of a comminuted femoral shaft fracture bridged by a locking plate was established and finite element analysis was performed to analyze the load distribution between the plate and femur from the proximal end of the femur to the fracture line and investigate the stress shielding degree of the plate on the bone. The stress, deformation, and axial compressive force distribution of four internal fixation schemes under compression were obtained, and the stress shielding degrees on each section was calculated. To compare the regularity of stress shielding and flow distribution, the relationship between the compressive force increment and stress shielding degree was established. The normalized curves of compressive force increment with the plate section position were compared with the flow distribution in a Z-type manifold, a parallel pipe system similar to an internal fixation system in structure and working characteristics. For quantitative comparison, the similarity between normalized curves of the compressive force increment and simulated flow distribution was calculated. The regularity of load distribution along the section position of the plate was similar to the flow distribution in the Z-type manifold. Therefore, the flow distribution pattern of the Z-type manifold can be used to characterize the regularity of load distribution in internal fixation. This study provided a new method to characterize the stress shielding degree of a locking plate on bone.
Asunto(s)
Fracturas del Fémur , Fijación Interna de Fracturas , Fenómenos Biomecánicos , Placas Óseas , Fracturas del Fémur/cirugía , Análisis de Elementos Finitos , Fijación Interna de Fracturas/métodos , HumanosRESUMEN
For internal fixation of proximal femoral fractures, a screw is commonly placed into the femoral head; therefore, mechanical matching of the femoral head and screw is important. This article proposes an elastoplastic numerical model of the femoral head that takes nonlinear deformation and cancellous bone heterogeneity into account. Force-depth curves from finite element analysis based on the model were compared with those from macroindentation experiments. The maximum difference between the indentation depth shown by the finite element model and that found with macroindentation testing was 5.9%, which demonstrates that the model is valid.
Asunto(s)
Fracturas del Fémur , Cabeza Femoral , Fenómenos Biomecánicos , Tornillos Óseos , Análisis de Elementos Finitos , Fijación Interna de Fracturas , HumanosRESUMEN
Excessive fertilization, low nutrient utilization rate, and continuous deterioration of cotton field environment have adversely affected the sustainable development of cotton in Xinjiang province of China. To overcome these issues, we hypothesized that an appropriate combination of liquid organic fertilizer and chemical fertilizer (CF) would effectively reduce the input of CF without sacrificing the quality and yield of cotton. A 2-year field experiment explores the effects of three fertilization treatments on the growth, biomass accumulation, and yield of cotton. The three fertilization treatments, namely, no application of fertilizer (CK), the single application of CF, and the combined application of organic liquid fertilizer and CF (F0.6-F1.4), were set up in five ratios. Compared with CF treatment, the combined application of organic liquid fertilizer and CF treatments (F0.6-F1.2) speeded the growth period of cotton by 2-7 days with increased plant height, stem diameter, functional leaf width, and more number of branches, with 9.7-23.5 and 8.4-28.5% higher total plant biomass (TPB) and reproductive organs biomass (ROB), respectively. Compared with CF treatment, the rapid growth duration and maximum accumulation rate of reproductive organs were the highest in F0.8 treatment, with an average increase of 4.6 days and 20.3%. Increment in biomass accumulation contributed to an average increase of 21.8 and 18.9% in cotton boll number and yield, respectively, under F0.8 treatment. Principal component analysis shows that the total biomass, ROB, and total bolls per unit area were positively correlated with the yield, while stem diameter and vegetative organ biomass are negatively correlated with the yield. In conclusion, under film mulching with drip irrigation, organic liquid fertilizer combined with CF reduced by 20% (F0.8 treatment: N, P2O5, and K2O were 182, 104, and 76 kg hm-2, respectively) can sustain the normal growth, promote the accumulation rate of ROB, and lead to efficient cotton production.
RESUMEN
The optical and electrical properties of the blending organic film poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (PEDOT:PSS) are strongly affected by its morphology, resulting in the performance variation in Si/organic hybrid solar cells. Here, a facile postsolvent treatment is used to tailor the vertical morphology of PEDOT:PSS by introducing a nonpolar solvent. X-ray photoelectron spectroscopy depth-profiling measurements show that the distribution of PEDOT and PSS on the surface of n-type Si can be changed by nonpolar solvent n-hexane (NHX) treatment, where more PSS aggregate at the bottom of the blend film and more PEDOT float up to the top, as compared with the reference sample. As a result, after NHX treatment, the average lifetime of the Si/organic films is increased from 152 µs for untreated samples to 248 µs for NHX-treated ones because of the better passivation effect of PSS on Si. Moreover, the transmission line model measurements indicate that the contact resistance (RC) of PEDOT:PSS film and the Ag electrode is decreased for better charge collection after NHX treatment. Eventually, the best power conversion efficiency (PCE) of 13.78% for NHX-treated planar solar cells is obtained, much higher than the PCE (with best of 12.78%) of reference devices without nonpolar solvent treatment. Our results provide a facile method to tailor the vertical morphology of the PEDOT:PSS in Si/organic hybrid solar cells.
RESUMEN
BACKGROUND AND OBJECTIVES: Methyl 3,4-dihydroxybenzoate (MDHB) has the potential to prevent neurodegenerative diseases (NDDs). The present work investigated its excretion, metabolism, and cytochrome P450-based drug-drug interactions (DDIs). METHODS: After intragastric administration of MDHB, the parent drug was assayed in the urine and faeces of mice. Metabolites of MDHB in the urine, faeces, brain, plasma and liver were detected by liquid chromatography-hybrid quadrupole time-of-flight mass spectrometry (LC-QTOF/MS). A cocktail approach was used to evaluate the inhibition of cytochrome P450 isoforms by MDHB. RESULTS: The cumulative excretion permille of MDHB in the urine and faeces were found to be 0.67 ± 0.31 and 0.49 ± 0.44, respectively. A total of 96 metabolites of MDHB were identified, and all IC50 (half-maximal inhibitory concentration) values of MDHB towards cytochrome P450 isoforms were > 100 µM. CONCLUSIONS: The results suggest that MDHB has a low parent drug cumulative excretion percentage and that MDHB has multiple metabolites and is mainly metabolized through the loss of -CH2 and -CO2, the loss of -CH2O, ester bond hydrolysis, the loss of -O and -CO2, isomerization, methylation, sulfate conjugation, the loss of -CH2O and -O and glycine conjugation, glycine conjugation, the loss of two -O groups and alanine conjugation, the loss of -CH2O and -O and glucose conjugation, glucuronidation, glucose conjugation, etc., in vivo. Finally, MDHB has a low probability of cytochrome P450-based DDIs.
Asunto(s)
Sistema Enzimático del Citocromo P-450/efectos de los fármacos , Hidroxibenzoatos/metabolismo , Eliminación Renal/efectos de los fármacos , Animales , Interacciones Farmacológicas , Heces , Hidroxibenzoatos/sangre , Masculino , Ratones , Estructura Molecular , Enfermedades Neurodegenerativas/prevención & control , Fármacos Neuroprotectores/metabolismo , Isoformas de ProteínasRESUMEN
According to cold heading process with overloaded craft, high-impact dynamic real-time measurement requirements, this paper presents researches on dynamic characteristics and optimization of PVDF piezoelectric film force sensor for steel ball cold heading forming quality monitoring, through the combination method of mechanism analysis, mathematical modeling, numerical simulation and experimental validation. The motivation and strategic objectives are to breakthrough dynamic time-varying impacting load measuring fundamental technologies in steel ball forging process. The structure of piezoelectric film force sensor is proposed. The theoretical calculation formula of natural frequency is deduced and calculated by using MATLAB software. The mechanical performance analysis on dynamic model and structural optimization simulation by FEM is carried out. In order to study the validity of the proposed method, a prototype of the sensor is fabricated. The static and dynamic calibration devices are designed to realize calibration experiments on the fabricated PVDF piezoelectric film force sensor. The differences among experimental value, simulation value and the theoretical value are given. The nonlinear error of the fabricated sensor is 0.197%. The sensor's first order natural frequency value is 5238 Hz. It is proved that the PVDF piezoelectric film force sensor has superior dynamic performance and high accuracy for measuring deformation in steel ball. The paper will provide important scientific basis and technical foundation to achieve superior performance steel ball.
RESUMEN
In the original publication, the following authors have been omitted due to a technical error in the original article.
RESUMEN
Phage display technology to produce recombinant monoclonal antibodies or antibody fragments permits the identification of sought after antibodies in short time frames at low cost along with direct and rapid selection for antibody characteristics. Monoclonal antibodies can facilitate the identification and characterisation of parasite molecules that function at the host-parasite interface to help understand at the molecular level the biology of the parasite and disease progression, which often leads to new drug targets, diagnostic antigens or vaccine candidates. The trematode Fasciola hepatica is an important veterinary and human parasite. In this work, we infected rats with F. hepatica and amplified the generated antibody repertoire to produce a single-chain variable fragment (scFv) phage display library. The library was used to identify a scFv that recognises cathepsin L1, a major component of the adult parasites excretory/secretory material and an important vaccine candidate. This is the first report of the construction of a phage display antibody library from a F. hepatica infected host, and also the first instance such a library has been used to identify an affinity-matured monoclonal antibody fragment that binds to a F. hepatica antigen. The scFv library and methods detailed should facilitate future research characterising F. hepatica antigens.
Asunto(s)
Anticuerpos Antihelmínticos/inmunología , Catepsinas/inmunología , Fasciola hepatica/inmunología , Biblioteca de Péptidos , Secuencia de Aminoácidos , Animales , Anticuerpos Monoclonales/inmunología , Antígenos Helmínticos/inmunología , Técnicas de Visualización de Superficie Celular , Clonación Molecular , Electroforesis en Gel de Agar , Biblioteca de Genes , Immunoblotting , Región Variable de Inmunoglobulina/química , Reacción en Cadena de la Polimerasa , Ratas , Ratas Endogámicas Lew , Anticuerpos de Cadena Única/genética , Anticuerpos de Cadena Única/inmunologíaRESUMEN
Freestanding nanomaterials (such as nanowires, nanoribbons, and nanotubes) are known to exhibit ultralarge elastic strains and ultrahigh strengths. However, harnessing their superior intrinsic mechanical properties in bulk composites has proven to be difficult. A recent breakthrough has overcome this difficulty by using a martensitic phase transforming matrix in which ultralarge elastic strains approaching the theoretical limit is achieved in Nb nanowires embedded in the matrix. This discovery, breaking a long-standing challenge, still limits our ability of harnessing the exceptional properties of nanomaterials and developing ultrahigh strength bulk materials to a narrow selection of phase transforming alloy matrices. In this study, we investigated the possibility to harness the intrinsic mechanical properties of nanoinclusions in conventional dislocation slip matrix based on a principle of synergy between the inclusion and the matrix. The small spacing between the densely populated hard and dislocation-impenetrable nanoinclusions departmentalize the plastic matrix into small domains to effectively impede dislocation motion within the matrix, inducing significant strengthening and large local elastic strains of the matrix, which in turn induced large elastic strains in the nanoinclusions. This dual phase synergy is verified in a Ti3Sn inclusions/B2-NiTi(Fe) plastic matrix model materials system. The maximum elastic strain of Ti3Sn inclusion obtained in the dislocation slip matrix is comparable to that achieved in a phase transforming matrix. This finding opens new opportunities for the development of high-strength nanocomposites.
RESUMEN
Numerous studies have focused on the development of novel and innovative approaches for the treatment of peripheral nerve injury using artificial nerve guide conduits. In this study, we attempted to bridge 3.5-cm defects of the sciatic nerve with a longitudinally oriented collagen conduit (LOCC) loaded with human umbilical cord mesenchymal stem cells (hUC-MSCs). The LOCC contains a bundle of longitudinally aligned collagenous fibres enclosed in a hollow collagen tube. Our previous studies showed that an LOCC combined with neurotrophic factors enhances peripheral nerve regeneration. However, it remained unknown whether an LOCC seeded with hUC-MSCs could also promote regeneration. In this study, using various histological and electrophysiological analyses, we found that an LOCC provides mechanical support to newly growing nerves and functions as a structural scaffold for cells, thereby stimulating sciatic nerve regeneration. The LOCC and hUC-MSCs synergistically promoted regeneration and improved the functional recovery in a dog model of sciatic nerve injury. Therefore, the combined use of an LOCC and hUC-MSCs might have therapeutic potential for the treatment of peripheral nerve injury.
Asunto(s)
Colágeno/farmacología , Trasplante de Células Madre Mesenquimatosas , Células Madre Mesenquimatosas/citología , Regeneración Nerviosa , Nervio Ciático/lesiones , Nervio Ciático/fisiopatología , Andamios del Tejido/química , Animales , Células Cultivadas , Perros , Fenómenos Electrofisiológicos/efectos de los fármacos , Humanos , Células Madre Mesenquimatosas/ultraestructura , Músculos/efectos de los fármacos , Nervio Ciático/efectos de los fármacos , Nervio Ciático/ultraestructuraRESUMEN
Regeneration of the corpus spongiosum helps prevent complications following urethral reconstruction, but currently there is a lack of effective therapeutic methods in clinic. In previous studies, we fabricated a fusion protein collagen-binding domain (CBD)-basic fibroblast growth factor (bFGF) that specifically binds to and releases from collagen biomaterials. We demonstrated that CBD-bFGF could promote angiogenesis and tissue regeneration in vivo. In this study, we established a beagle model with extensive urethral defects, and reconstructed the defects with collagen biomaterials that were unmodified or modified with CBD-bFGF. The results demonstrate that CBD-bFGF promotes corpus spongiosum regeneration resulting in improved outcomes following urethral reconstruction. Modifying collagen biomaterials with CBD-bFGF may represent an effective strategy for urethral substitution in urethral reconstruction.
Asunto(s)
Colágeno/química , Factor 2 de Crecimiento de Fibroblastos/química , Regeneración , Andamios del Tejido/química , Uretra/cirugía , Animales , Materiales Biocompatibles/química , Perros , Masculino , Ensayo de Materiales , Distribución Aleatoria , Proteínas Recombinantes de Fusión/química , Procedimientos de Cirugía Plástica , Resistencia a la Tracción , Uretra/diagnóstico por imagen , Cicatrización de HeridasRESUMEN
This paper presents a novel integrated piezoelectric six-dimensional force sensor which can realize dynamic measurement of multi-dimensional space load. Firstly, the composition of the sensor, the spatial layout of force-sensitive components, and measurement principle are analyzed and designed. There is no interference of piezoelectric six-dimensional force sensor in theoretical analysis. Based on the principle of actual work and deformation compatibility coherence, this paper deduces the parallel load sharing principle of the piezoelectric six-dimensional force sensor. The main effect factors which affect the load sharing ratio are obtained. The finite element model of the piezoelectric six-dimensional force sensor is established. In order to verify the load sharing principle of the sensor, a load sharing test device of piezoelectric force sensor is designed and fabricated. The load sharing experimental platform is set up. The experimental results are in accordance with the theoretical analysis and simulation results. The experiments show that the multi-dimensional and heavy force measurement can be realized by the parallel arrangement of the load sharing ring and the force sensitive element in the novel integrated piezoelectric six-dimensional force sensor. The ideal load sharing effect of the sensor can be achieved by appropriate size parameters. This paper has an important guide for the design of the force measuring device according to the load sharing mode.
RESUMEN
A multitude of experimental vaccines have been developed against liver flukes in the past. However, there has yet to be the development of a commercial livestock vaccine. Reasons for this may be multiple, and include the lack of identification of the best antigen(s), or the immune response induced by those antigens not being appropriate in either magnitude or polarity (and therefore not protective). Cathepsin proteases are the major component of the excretory/secretory (ES) material of liver flukes in all stages of their life cycle in the definitive host and are the primary antigens of interest for the vaccine development in many studies. Hence, this chapter presents the methodologies of using cathepsin proteases as targeted antigens in recombinant protein and DNA vaccine development to engender protective immune responses against fasciolosis.First, the experimental vaccines developed in the past and the criteria of an effective vaccine for fasciolosis are briefly reviewed. Then flowcharts for recombinant protein vaccine and DNA vaccine development are presented, followed by the detailed materials and methodologies.
Asunto(s)
Fasciola hepatica/inmunología , Ingeniería Genética/métodos , Vacunas de ADN/inmunología , Animales , Células COS , Catepsinas/genética , Chlorocebus aethiops , Clonación Molecular , Biología Computacional , Fasciola hepatica/enzimología , Femenino , Vectores Genéticos/genética , Masculino , Ratones , Ratas , Vacunas de ADN/genética , Vacunas Sintéticas/genética , Vacunas Sintéticas/inmunologíaRESUMEN
The macroscopic tensile plasticity of bulk metallic glasses (BMGs) is highly desirable for various engineering applications. However, upon yielding, plastic deformation of BMGs is highly localized into narrow shear bands and then leads to the "work softening" behaviors and subsequently catastrophic fracture, which is the major obstacle for their structural applications. Here we report that macroscopic tensile plasticity in BMG can be obtained by designing surface pore distribution using laser surface texturing. The surface pore array by design creates a complex stress field compared to the uniaxial tensile stress field of conventional glassy specimens, and the stress field scalarization induces the unusual tensile plasticity. By systematically analyzing fracture behaviors and finite element simulation, we show that the stress field scalarization can resist the main shear band propagation and promote the formation of larger plastic zones near the pores, which undertake the homogeneous tensile plasticity. These results might give enlightenment for understanding the deformation mechanism and for further improvement of the mechanical performance of metallic glasses.
RESUMEN
The design principles for naturally occurring biological materials have inspired us to develop next-generation engineering materials with remarkable performance. Nacre, commonly referred to as nature's armor, is renowned for its unusual combination of strength and toughness. Nature's wisdom in nacre resides in its elaborate structural design and the judicious placement of a unique organic biopolymer with intelligent deformation features. However, up to now, it is still a challenge to transcribe the biopolymer's deformation attributes into a stronger substitute in the design of new materials. In this study, we propose a new design strategy that employs shape memory alloy to transcribe the "J-curve" mechanical response and uniform molecular/atomic level deformation of the organic biopolymer in the design of high-performance hybrid materials. This design strategy is verified in a TiNi-Ti3Sn model material system. The model material demonstrates an exceptional combination of mechanical properties that are superior to other high-performance metal-based lamellar composites known to date. Our design strategy creates new opportunities for the development of high-performance bio-inspired materials.
Asunto(s)
Biopolímeros/química , Níquel/química , Estaño/química , Titanio/químicaRESUMEN
A novel torsion apparatus for micro-scale specimens is developed based on electromagnetism, in which a coil-magnet component is used for actuating and torque measuring. When the current gets through the coil, the torque, produced by Ampere force, can be easily measured by recording the current. A laser displacement sensor is applied to measure the rotation angle. The torque is calibrated using Sartorius BP211D balance. The calibration results demonstrate there is a perfect linear relationship between the torque and the current. The torque capacity is 4.0 × 10(-4) N m with noise-floor of less than 10(-8) N m. The rotation angle capacity is 60° with noise-floor of less than 0.02°. Two sets of copper wire specimens, with diameter of 100 µm and 140 µm, are tested using this apparatus. Experimental results, with good resolution and repeatability, successfully demonstrate the effectiveness of the torsion testing technique for micro-scale specimens.