Sulfurized Two-Dimensional Conductive Metal-Organic Framework as a High-Performance Cathode Material for Rechargeable Mg Batteries.

Rechargeable Mg batteries are a promising energy storage technology to overcome the limitations inherent to Li ion batteries. A critical challenge in advancing Mg batteries is the lack of suitable cathode materials. In this work, we report a cathode design that incorporates S functionality into two-dimensional metal-organic-frameworks (2D-MOFs). This new cathode material enables good Mg2+ storage capacity and outstanding cyclability. It was found that upon the initial Mg2+ insertion and disinsertion, there is an apparent structural transformation that crumbles the layered 2D framework, leading to amorphization. The resulting material serves as the active material to host Mg2+ through reduction and/or oxidation of S and, to a limited extent, O. The reversible nature of S and O redox chemistry was confirmed by spectroscopic characterizations and validated by density functional calculations. Importantly, during the Mg2+ insertion and disinsertion process, the 2D nature of the framework was maintained, which plays a key role in enabling the high reversibility of the MOF cathode.

Cu Promoted the Dynamic Evolution of Ni-Based Catalysts for Polyethylene Terephthalate Plastic Upcycling.

Upcycling plastic wastes into value-added chemicals is a promising approach to put end-of-life plastic wastes back into their ecocycle. As one of the polyesters that is used daily, polyethylene terephthalate (PET) plastic waste is employed here as the model substrate. Herein, a nickel (Ni)-based catalyst was prepared via electrochemically depositing copper (Cu) species on Ni foam (NiCu/NF). The NiCu/NF formed Cu/CuO and Ni/NiO/Ni(OH)2 core-shell structures before electrolysis and reconstructed into NiOOH and CuOOH/Cu(OH)2 active species during the ethylene glycol (EG) oxidation. After oxidation, the Cu and Ni species evolved into more reduced species. An indirect mechanism was identified as the main EG oxidation (EGOR) mechanism. In EGOR, NiCu60s/NF catalyst exhibited an optimal Faradaic efficiency (FE, 95.8%) and yield rate (0.70 mmol cm-2 h-1) for formate production. Also, over 80% FE of formate was achieved when a commercial PET plastic powder hydrolysate was applied. Furthermore, commercial PET plastic water bottle waste was employed as a substrate for electrocatalytic upcycling, and pure terephthalic acid (TPA) was recovered only after 1 h electrolysis. Lastly, density functional theory (DFT) calculation revealed that the key role of Cu was significantly reducing the Gibbs free-energy barrier (ΔG) of EGOR's rate-determining step (RDS), promoting catalysts' dynamic evolution, and facilitating the C-C bond cleavage.

Modulating the Primary and Secondary Coordination Spheres of Single Ni(II) Sites in Metal-Organic Frameworks for Boosting Photocatalysis.

Though the coordination environment of single metal sites has been recognized to be of great importance in promoting catalysis, the influence of simultaneous precise modulation of primary and secondary coordination spheres on catalysis remains largely unknown. Herein, a series of single Ni(II) sites with altered primary and secondary coordination spheres have been installed onto metal-organic frameworks (MOFs) with UiO-67 skeleton, affording UiO-Ni-X-Y (X = S, O; Y = H, Cl, CF3) with X and Y on the primary and secondary coordination spheres, respectively. Upon deposition with CdS nanoparticles, the resulting composites present high photocatalytic H2 production rates, in which the optimized CdS/UiO-Ni-S-CF3 exhibits an excellent activity of 13.44 mmol g-1, ∼500 folds of the pristine catalyst (29.6 µmol g-1 for CdS/UiO), in 8 h, highlighting the key role of microenvironment modulation around Ni sites. Charge kinetic analysis and theoretical calculation results demonstrate that the charge transfer dynamics and reaction energy barrier are closely correlated with their coordination spheres. This work manifests the advantages of MOFs in the fabrication of structurally precise catalysts and the elucidation of particular influences of microenvironment modulation around single metal sites on the catalytic performance.

Control over Charge Separation by Imine Structural Isomerization in Covalent Organic Frameworks with Implications on CO2 Photoreduction.

Two-dimensional covalent organic frameworks (COFs) are an emerging class of photocatalytic materials for solar energy conversion. In this work, we report a pair of structurally isomeric COFs with reversed imine bond directions, which leads to drastic differences in their physical properties, photophysical behaviors, and photocatalytic CO2 reduction performance after incorporating a Re(bpy)(CO)3Cl molecular catalyst through bipyridyl units on the COF backbone (Re-COF). Using the combination of ultrafast spectroscopy and theory, we attributed these differences to the polarized nature of the imine bond that imparts a preferential direction to intramolecular charge transfer (ICT) upon photoexcitation, where the bipyridyl unit acts as an electron acceptor in the forward imine case (f-COF) and as an electron donor in the reverse imine case (r-COF). These interactions ultimately lead the Re-f-COF isomer to function as an efficient CO2 reduction photocatalyst, while the Re-r-COF isomer shows minimal photocatalytic activity. These findings not only reveal the essential role linker chemistry plays in COF photophysical and photocatalytic properties but also offer a unique opportunity to design photosensitizers that can selectively direct charges.

Electronic Tuning of Photoexcited Dynamics in Heteroleptic Cu(I) Complex Photosensitizers.

Photoexcited dynamics of heteroleptic Cu(I) complexes as noble-metal-free photosensitizers are closely intertwined with the nature of their ligands. By utilizing ultrafast optical and X-ray transient absorption spectroscopies, we characterized a new set of heteroleptic Cu(I) complexes [Cu(PPh3)2(BPyR)]+ (R = CH3, H, Br to COOCH3), with an increase in the electron-withdrawing ability of the functional group (R). We found that after the transient photooxidation of Cu(I) to Cu(II), the increasing electron-withdrawing ability of R barely affects the internal conversion (IC) (e.g., Jahn-taller (JT) distortion) between singlet MLCT states. However, it does accelerate the dynamics of intersystem crossing (ISC) between singlet and triplet MLCT states and the subsequent decay from the triplet MLCT state to the ground state. The associated lifetime constants are reduced by up to 300%. Our understanding of the photoexcited dynamics in heteroleptic Cu(I) complexes through ligand electronic tuning provides valuable insight into the rational design of efficient Cu(I) complex photosensitizers.

Postsynthetic Modification of the Nonanuclear Node in a Zirconium Metal-Organic Framework for Photocatalytic Oxidation of Hydrocarbons.

Heterogeneous catalysis plays an indispensable role in chemical production and energy conversion. Incorporation of transition metals into metal oxides and zeolites is a common strategy to fine-tune the activity and selectivity of the resulting solid catalysts, as either the active center or promotor. Studying the underlying mechanism is however challenging. Decorating the metal-oxo clusters with transition metals in metal-organic frameworks (MOFs) via postsynthetic modification offers a rational approach to construct well-defined structural models for better understanding of the reaction mechanism. Therefore, it is important to expand the materials scope beyond the currently widely studied zirconium MOFs consisting of Zr6 nodes. In this work, we report the design and synthesis of a new (4,12)-connected Zr-MOF with ith topology that consists of rare Zr9 nodes. FeIII was further incorporated onto the Zr9 nodes of the framework, and the resulting MOF material exhibits significantly enhanced activity and selectivity toward the photocatalytic oxidation of toluene. This work demonstrates a delicate ligand design strategy to control the nuclearity of Zr-oxo clusters, which further dictates the number and binding sites of transition metals and the overall photocatalytic activity toward C-H activation. Our work paves the way for future exploration of the structure-activity study of catalysts using MOFs as the model system.

Dominant Role of Hole Transport Pathway in Achieving Record High Photoconductivity in Two-Dimensional Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) with mobile charges have attracted significant attention due to their potential applications in photoelectric devices, chemical resistance sensors, and catalysis. However, fundamental understanding of the charge transport pathway within the framework and the key properties that determine the performance of conductive MOFs in photoelectric devices remain underexplored. Herein, we report the mechanisms of photoinduced charge transport and electron dynamics in the conductive 2D M-HHTP (M=Cu, Zn or Cu/Zn mixed; HHTP=2,3,6,7,10,11-hexahydroxytriphenylene) MOFs and their correlation with photoconductivity using the combination of time-resolved terahertz spectroscopy, optical transient absorption spectroscopy, X-ray transient absorption spectroscopy, and density functional theory (DFT) calculations. We identify the through-space hole transport mechanism through the interlayer sheet π-π interaction, where photoinduced hole state resides in HHTP ligand and electronic state is localized at the metal center. Moreover, the photoconductivity of the Cu-HHTP MOF is found to be 65.5 S m-1 , which represents the record high photoconductivity for porous MOF materials based on catecholate ligands.

Enhanced energy transfer efficiency upon confining rhodamine B into zeolitic imidazolate frameworks.

Enhancing the utilization of absorbed light is essential for enhancing the efficiency of solar energy conversion via artificial photosynthesis. In this work, we report the successful incorporation of Rhodamine B (RhB) into the pore of ZIF-8 (ZIF = zeolitic imidazolate framework) and the efficient energy transfer process from RhB to Co-doped ZIF-8. Using transient absorption spectroscopy, we show that energy transfer only occurs from RhB (donor) to Co center (acceptor) when RhB is confined into the ZIF-8 structure, which is in stark contrast to the system based on the physical mixture of RhB with Co-doped ZIF-8, where negligible energy transfer was observed. In addition, energy transfer efficiency increases with the concentration of Co and reaches a plateau when the molar ratio of Co to RhB reaches 32. These results suggest that RhB confined in the ZIF-8 structure is essential for energy transfer to occur, and energy transfer efficiency can be controlled by tuning the concentration of acceptors.

Engineering Band Gap and Photoconduction in Semiconducting Metal Organic Frameworks: Metal Node Effect.

We report a systematic study on the correlation of the metal nodes in M-THQ conducting MOFs (M = Fe, Ni, Cu, and Zn; THQ = tetra-hydroxybenzoquinone) with their structure, photophysical property, and photoconductivity. We found that the structural preference in these MOFs is controlled by metal node identity where Cu prefers a square planar coordination which leads to a 2D Kagome-type structure. Fe, Ni, and Zn prefer an octahedral sphere which leads to a 3D structure. Fe-THQ has the smallest band gap and highest photoconduction as well as a long-lived ligand-to-metal charge transfer state due to the mixed valence state revealed by time-resolved optical and X-ray absorption and terahertz spectroscopy. These results demonstrate the importance of the metal node in tuning the photophysical and photocatalytic properties of MOFs.

Selective Formation of Acetic Acid and Methanol by Direct Methane Oxidation Using Rhodium Single-Atom Catalysts.

Atomically dispersed catalysts such as single-atom catalysts have been shown to be effective in selectively oxidizing methane, promising a direct synthetic route to value-added oxygenates such as acetic acid or methanol. However, an important challenge of this approach has been that the loading of active sites by single-atom catalysts is low, leading to a low overall yield of the products. Here, we report an approach that can address this issue. It utilizes a metal-organic framework built with porphyrin as the linker, which provides high concentrations of binding sites to support atomically dispersed rhodium. It is shown that up to 5 wt% rhodium loading can be achieved with excellent dispersity. When used for acetic acid synthesis by methane oxidation, a new benchmark performance of 23.62 mmol·gcat-1·h-1 was measured. Furthermore, the catalyst exhibits a unique sensitivity to light, producing acetic acid (under illumination, up to 66.4% selectivity) or methanol (in the dark, up to 65.0% selectivity) under otherwise identical reaction conditions.

Selective NOx- Electroreduction to Ammonia on Isolated Ru Sites.

Nitrate and nitrite (NOx-) are widespread contaminants in industrial wastewater and groundwater. Sustainable ammonia (NH3) production via NOx- electroreduction provides a prospective alternative to the energy-intensive industrialized Haber-Bosch process. However, selectively regulating the reaction pathway, which involves complicated electron/proton transfer, toward NH3 generation relies on the robust catalyst. A specific consideration in designing selective NOx--to-NH3 catalysts should meet the criteria to suppress competing hydrogen evolution and avoid the presence of neighboring active sites that are in favor of adverse N-N coupling. Nevertheless, efforts in this regard are still inadequate. Herein, we demonstrate that isolated ruthenium sites can selectively reduce NOx- into NH3, with maximal Faradaic efficiencies of 97.8% (NO2- reduction) and 72.8% (NO3- reduction) at -0.6 and -0.4 V, respectively. Density functional theory calculations simulated the reaction mechanisms and identified the *NO → *NOH as the potential rate-limiting step for NOx--to-NH3 conversion on single-atom Ru sites.

Zinc Single Atom Confinement Effects on Catalysis in 1T-Phase Molybdenum Disulfide.

Active sites are atomic sites within catalysts that drive reactions and are essential for catalysis. Spatially confining guest metals within active site microenvironments has been predicted to improve catalytic activity by altering the electronic states of active sites. Using the hydrogen evolution reaction (HER) as a model reaction, we show that intercalating zinc single atoms between layers of 1T-MoS2 (Zn SAs/1T-MoS2) enhances HER performance by decreasing the overpotential, charge transfer resistance, and kinetic barrier. The confined Zn atoms tetrahedrally coordinate to basal sulfur (S) atoms and expand the interlayer spacing of 1T-MoS2 by ∼3.4%. Under confinement, the Zn SAs donate electrons to coordinated S atoms, which lowers the free energy barrier of H* adsorption-desorption and enhances HER kinetics. In this work, which is applicable to all types of catalytic reactions and layered materials, HER performance is enhanced by controlling the coordination geometry and electronic states of transition metals confined within active-site microenvironments.

Quantum dot gels as efficient and unique photocatalysts for organic synthesis.

Here we report CdS quantum dot (QD) gels as highly efficient and unique photocatalysts for organic synthesis. We found that the photocatalytic activity of CdS QD gel was superior to phosphine oxide- and thiolate-capped CdS QDs for dehalogenation and α-amine arylation reactions because of the high accessibility of its surface sites to the substrates. In addition, we discovered the unique reactivity of CdS QD gel for ring-opening during α-amine arylation of tetrahydroisoquinoline via the reductive cleavage of C-N bonds. QD gels provide new opportunities in photocatalysis due to their unique surface interactions with the substrates or intermediates.

Tuning the Charge Transport Property and Photocatalytic Activity of Anthracene-Based 1D π-d Conjugated Coordination Polymers by Interlayer Stacking.

One-dimensional (1D) π-d-conjugated coordination polymers (CCPs) with charge delocalization have attracted significant attention due to their potential application in energy conversion and storage. However, the fundamental understanding of the correlation of their structural parameters with photophysical and photocatalytic properties remains underexplored. Herein, we report three novel Cu-node anthracene-based 1D π-d CCPs with systematic variation of steric groups (Ph > Me > H) at the 9 and 10 position of anthracene (denoted as AnPh, AnMe, and AnH), which is aimed at altering the stacking of the polymer chains and its impact on the inter-chain charge transport property. Using the combination of steady-state X-ray absorption spectroscopy, optical transient absorption spectroscopy, X-ray transient absorption spectroscopy, and electrochemical impedance spectroscopy, we show that the linear ligands (AnPh, AnMe, and AnH) with different degrees of steric groups (Ph > Me > H) introduced at the 9 and 10 position of anthracene can alter the stacking of the polymer chains and thus impact their crystallinity, charge separation, and charge transport property, which in turn impacts their photocatalytic performance for hydrogen evolution reaction.

Synchrotron X-Ray-Driven Nitrogen Reduction on an AgCu Thin Film.

Nitrogen (N2 ) is an essential element for life, but kinetically stable N2 in the atmosphere needs to be reduced to biologically available forms as a nutrient for organisms. Abiotic nitrogen fixation is critical to the origin of life on the early Earth, which is due to lightning or mineral-based reduction. Here, synchrotron X-ray-induced silver nitrate formation on a silver copper (AgCu) thin-film is reported. Time-resolved X-ray diffraction measurements show that under intense X-ray exposure, initially formed silver oxides (AgOx) are quickly converted to silver nitrate (AgNO3 ). Interestingly, AgNO3 is first formed in its high-temperature phase with a space group of R3cH, which gradually transforms to the room temperature phase with a space group of Pbca under continuous X-ray irradiation. The result not only provides a new clue about the abiotic nitrogen reduction prior to life but also demonstrates a novel strategy of materials synthesis using synchrotron X-rays.

Synchrotron X-ray-induced Synthesis of Copper Hydroxide Nitrate Nanoplates on Cu Thin Films in an Ambient Atmosphere.

Synchrotron X-rays are widely used for material characterizations. However, they can also ionize atoms and molecules to damage and manipulate probed materials. We report here an X-ray-induced growth of copper hydroxide nitrate, Cu2(OH)3NO3, on copper thin films in the ambient atmosphere without solvents and thermal treatment. In situ synchrotron X-ray diffraction measurements showed that the time-dependent growth process of theCu2(OH)3NO3 is accompanied by the consumption of Cu metal and can be described by a sigmoidal model. The growth rate was reduced after the initial fast growth period. Scanning electron microscopy (SEM) images show that the isolated islands of Cu2(OH)3NO3 nanoplates formed in the beginning, which grew together with new nanoplates formed under continued X-ray irradiation. The result demonstrated that high-flux synchrotron X-rays may provide an unconventional approach to synthesizing and manipulating materials, which will inspire future investigation both experimentally and theoretically.

Impact of π-Conjugation Length on the Excited-State Dynamics of Star-Shaped Carbazole-π-Triazine Organic Chromophores.

Correlating star-shaped donor-bridge-acceptor (DBA) molecular structures with intramolecular charge transfer (ICT) and intersystem crossing (ISC) is essential to their application in photocatalysis, photovoltaics, and organic light-emitting diodes (OLEDs). In this work, we report a systematic photophysical study on a series of star-shaped triazine-phenylene-carbazole DBA molecules with 0, 1, and 2 bridging phenylene units (pTCT-0P, pTCT-1P, pTCT-2P). Using a combination of steady-state and time-resolved spectroscopy with time-dependent density functional theory (TDDFT), we find that the bridge length can strongly impact the structural conformation, ICT, and ISC. Global target analysis of the time-resolved spectroscopy reveals that pTCT-0P has the most favorable ISC rate of 1.96 × 10-4 ps-1, which is competitive with a singlet relaxation rate of 1.92 × 10-4 ps-1. TDDFT aligns with spectroscopic results within an order of magnitude, predicting an ISC rate of 2.1 × 10-5 ps-1 and revealing that the donor/acceptor orthogonalization concomitantly suppresses singlet exciton recombination and lowers the singlet-triplet energy gap. The new fundamental insights gained from this work will help design the next generation of star-shaped DBA-type molecules for photocatalytic and photoelectronic applications.

Postsynthetic Treatment of ZIF-67 with 5-Methyltetrazole: Evolution from Pseudo-Td to Pseudo-Oh Symmetry and Collapse of Magnetic Ordering.

Reaction of Co(II) nitrate with 2-methylimidazole (2mIm) yields ZIF-67, the structure of which features Co(II) ions in pseudo-tetrahedral coordination geometry. Strong antiferromagnetic interactions between Co(II) ions mediated by the 2mIm ligands lead to antiferromagnetic ordering at 22 K. Postsynthetic treatment of Co(II) ZIF-67 with 5-methyltetrazole (5mT) results in the loss of crystallinity and magnetic order. The local structure of the Co(II) ions was probed by a combination of diffuse-reflectance electronic absorption spectroscopy and Co K-edge X-ray absorption spectroscopy (in the XANES and EXAFS regions). Upon reaction with 5mT, the 4A2(F)-4T1(F) and 4A2(F)-4T1(P) transitions at 1140 and 585 nm, respectively, of the pseudo-tetrahedral Co(II) center in ZIF-67 become less prominent and are replaced by transitions at 990 and 475 nm attributable to the 4T1g(F)-4T2g(F) and 4T1g(F)-4T1g(P) transitions of a pseudo-octahedral Co(II) center, respectively. Furthermore, the 1s-3d pre-edge absorption feature in the Co K-edge XANES spectrum loses intensity during this reaction, and the edge feature becomes more sharp, consistent with a change from pseudo-Td to pseudo-Oh geometry. EXAFS analysis further supports the proposed change in geometry: EXAFS data for ZIF-67 are well fitted to four Co-N scatterers at 1.99 Å, whereas the data for the 5mT-substituted compound are best fitted with 6 Co-N scatterers at 2.14 Å. Our results support the conclusion that a six-coordinate, pseudo-Oh geometry is adopted upon ligand substitution. The increase in coordination number directly increases the Co-N bond distances, which in turn weakens magnetic exchange interactions. No magnetic ordering is found in the 5mT-substituted materials.

Tuning Photoexcited Charge Transfer in Imine-Linked Two-Dimensional Covalent Organic Frameworks.

The generation of a long-lived charge-separated state in versatile π-conjugated two-dimensional covalent organic frameworks (2D COFs), a process essential to extending their great potentials in advanced semiconducting applications, is yet fully elucidated. Herein, we report a systematic investigation of the photophysical properties of three highly crystalline imine-linked 2D COFs using steady-state and transient absorption spectroscopy accompanied by time-dependent density functional theory (TDDFT) calculations. The different electron affinity between 5,5',5″-(1,3,5-benzenetriyl)tris(2-pyridinecarboxaldehyde) (BTPA) and three tunable electron-donating/accepting triamine monomers dominated the formation of the excited-state, charge-transfer direction, and lifetime. A prominent charge transfer from electron-rich 4,4',4″-triaminotriphenylamine (TAPA) to BTPA in COFTAPA-BTPA led to the long-lived charge-separated state, which was attributed to a greater degree of delocalization compared to the two other COFs. These results provide fundamental insight into the importance of structure-property correlation for designing advanced photoactive 2D COF materials with the efficient charge transfer and long-lived charge-separated state.

Symmetry-Guided Synthesis of N,N'-Bicarbazole and Porphyrin-Based Mixed-Ligand Metal-Organic Frameworks: Light Harvesting and Energy Transfer.

In the past decades, many attempts have been made to mimic the energy transfer (EnT) in photosynthesis, a key process occurring in nature that is of fundamental significance in solar fuels and sustainable energy. Metal-organic frameworks (MOFs), an emerging class of porous crystalline materials self-assembled from organic linkers and metal or metal cluster nodes, offer an ideal platform for the exploration of directional EnT phenomena. However, placing energy donor and acceptor moieties within the same framework with an atomistic precision appears to be a major synthesis challenge. In this work, we report the design and synthesis of a highly porous and photoactive N,N'-bicarbazole- and porphyrin-based mixed-ligand MOF, namely, NPF-500-H2TCPP (NPF = Nebraska porous framework; H2TCPP = meso-tetrakis(4-carboxyphenyl)porphyrin), where the secondary ligand H2TCPP is incorporated precisely through the open metal sites of the equatorial plane of the octahedron cage resulting from the underlying (4,8) connected network of NPF-500. The efficient EnT process from N,N'-bicarbazole to porphyrin in NPF-500-H2TCPP was captured by time-resolved spectroscopy and exemplified by photocatalytic oxidation of thioanisole. These results demonstrate not only the capability of NPF-500 as the scaffold to precisely arrange the donor-acceptor assembly for the EnT process but also the potential to directly utilize the EnT process for photocatalytic applications.