Observation of RIN reduction via spectral broadening in an NPR-based stretched pulse fiber laser.

We show that an optimum mode-locking state with low relative intensity noise (RIN) can be identified by continuous broadening of an optical spectrum in a stretched-pulse fiber laser based on nonlinear polarization rotation (NPR). Under the premise of keeping the overall spectral shape unchanged, either gradually increasing the pump power or unidirectionally adjusting the polarization controller (PC) can effectively reduce RIN as the optical spectral bandwidth broadens. The optimized intensity noise performance of the laser can be attributed to the increased pulse energy and reduced intra-cavity net dispersion. Moreover, the integrated RIN will further decrease as the maximum 3-dB bandwidth extends. In our experiment, the detected minimum integrated rms RIN is below 0.003% (from 100 Hz to 100 kHz). Our experimental results find that the absolute spectral width is not a necessary key condition for obtaining low RIN mode-locked laser, whereas it may help understand and design versatile low-noise ultrafast laser sources.

0.017†nm, 143†ps passively mode-locked fiber laser based on nonlinear polarization rotation.

Mode-locked lasers with ultra-narrow spectral widths and durations of hundreds of picoseconds can be versatile light sources for a variety of newly emergent applications. However, less attention seems to be given to mode-locked lasers that generate narrow spectral bandwidths. We demonstrate a passively mode-locked erbium-doped fiber laser (EDFL) system that relies on a standard fiber Bragg grating (FBG) and the nonlinear polarization rotation (NPR) effect. This laser achieves the longest reported pulse width (to the best of our knowledge) of 143 ps based on NPR and an ultra-narrow spectral bandwidth of 0.017 nm (2.13 GHz) under Fourier transform-limited conditions. The average output power is 2.8 mW, and the single-pulse energy is 0.19 nJ at a pump power of 360 mW.

Intracavity-loss controlled wavelength-tunable bidirectional mode-locked erbium-doped fiber laser.

Bidirectional wavelength-tunable mode-locked fiber lasers have demands for many applications. In our experiment, two frequency combs from a single bidirectional carbon nanotube mode-locked erbium-doped fiber laser are obtained. Continuous wavelength tuning is demonstrated in the bidirectional ultrafast erbium-doped fiber laser for the first time. We utilized the microfiber assisted differential loss-control effect on both directions to tune operation wavelength and it presents different wavelength tuning performances in two directions. Correspondingly, the repetition rate difference can be tuned from 98.6 Hz to 32 Hz by applying strain on microfiber within 23 µm stretching length. In addition, a minor repetition rate difference variation of 4.5 Hz is achieved. Such technique may provide possibility to expand wavelength range of dual-comb spectroscopy and broad its application fields.

Nickel sulfide-oxide heterostructured electrocatalysts: Bi-functionality for overall water splitting and in-situ reconstruction.

Bi-functional electrocatalysts are desired for both hydrogen and oxygen evolution reactions (HER and OER). Herein, facile O2-plasma activation is introduced to improve the bi-functionality via constructing nickel sulfide-oxide heterostructures. Ni3S2-NiOx supported by nickel foam delivers obviously elevated HER and OER activity in comparison with pristine Ni3S2 and recently reported NiSx-based electrocatalysts, featured by the low overpotentials for HER (104 mV) and OER (241 mV) at ±10 mA cm-2 in 1.0 M KOH, as well as a voltage of 1.52 V for overall water splitting. As revealed by in-situ Raman spectroscopy, on the one hand, Ni(OH)2 generated from Ni3S2 during alkaline HER accelerates water dissociation toward the gradually improved performance; on the other hand, this heterostructure undergoes extensive oxidation during OER, leading to excessive NiOOH covering on Ni3S2 and thereby declining activity. These changes are interpreted by the distinct thermodynamic relationship under specific electrochemical conditions via density functional theory calculations.

Transient soliton dynamics in a mode-locked fiber laser: from stationary to pulsation.

We report the experimental observation of the transformation process from a stationary soliton to a pulsating soliton in a mode-locked fiber laser. The detailed soliton dynamics, including soliton parameter changings and sideband variation in the transition, are analyzed by the dispersive Fourier transformation technique. This Letter unveils the great enhancement of intracavity periodic perturbations resulting from the slight increase of soliton intensity induced soliton modulation instability, leading to the occurrence of parametric sidebands and multi-periodic pulsing instability. Our experimental results can shed some light on the intrinsic mechanism of soliton pulsation, as well as contribute to the study of soliton stability and laser dynamics.

Generation of 64-fs L-band stretched pulses from an all-fibre Er-doped laser.

We demonstrate an L-band all-fibre erbium-doped laser mode locked by nonlinear polarisation rotation and working in the stretched-pulse regime. The use of a single segment of gain fibre with appropriate length and dispersion and a Brewster fibre grating optimised for the L band as an in-fibre polariser enables the generation of pulses at 1.59-µm central wavelength, which can be linearly compressed to 64-fs duration. Numerical simulations of the laser model support our experimental findings. Our laser design gives a route towards low-cost and low-complexity fibre-integrated laser sources for applications requiring L-band ultrashort pulses.

Wavelength-tunable L-band mode-locked fiber laser using a long-period fiber grating.

We demonstrate an L-band wavelength-tunable passively mode-locked fiber laser using a single long-period fiber grating (LPFG) as a narrow-band optical attenuator (NBOA). Through bending the LPFG, the central wavelength can be continuously tuned from 1582.02 to 1597.29 nm, while the output power only varies from 1.465 to 1.057 mW, approximately a rate of 22 µW/nm variation. This is the first time that LPFG is functioned as a NBOA in mode-locked fiber lasers, showing the great advantage of less impact on output power variation reduction. Besides, the total cavity length is 5.08 m, which is the shortest length yet reported in wavelength-tunable mode-locked fiber lasers. The wavelength tuning could also be realized at harmonic mode locking with tuning range of 14.69 nm under 5th harmonic.

Wavelength-Tunable L-Band High Repetition Rate Erbium-Doped Fiber Laser Based on Dissipative Four-Wave Mixing.

A wavelength-tunable high repetition rate (HRR) erbium-doped fiber laser in L-band based on dissipative four-wave mixing (DFWM) mechanism is demonstrated. The cavity can generate a single-soliton train and bound-soliton train with a fixed repetition rate of ~126 GHz, which is determined by the free spectral range of the intra-cavity Lyot filter. A wide wavelength-tuning operation can also be obtained by rotating the polarization controllers. The wavelength-tuning ranges of the HRR single-soliton state and HRR bound-soliton state are ~38.3 nm and ~22.6 nm, respectively. This laser provides useful references for the area of a wavelength-tunable fiber laser with high repetition rate. The laser may also find useful applications in high-speed communication, sensing, etc.

Wavelength-tunable bidirectional passively Q-switched Er-doped fiber laser incorporating a single-walled carbon nanotube and tunable bandpass filter.

We demonstrated a continuously wavelength-tunable bidirectional passively $ Q $Q-switched fiber laser based on a single-walled carbon nanotube saturable absorber and a bandpass filter (BPF). By tuning the commercial BPF, the $ Q $Q-switched pulse can be obtained in the same cavity at the same pump power in clockwise (CW) and counter-clockwise (CCW) directions. The central wavelength can be continuously tuned from 1520.88 to 1568.56 nm in the CW direction, and from 1520.96 to 1568.64 nm in the CCW direction. A wide tuning range of 48 nm is achieved for two directions in the passively $ Q $Q-switched fiber laser. During the tuning process of the fiber laser, the output pulses with the same central lasing wavelength can be obtained in both oscillation directions owing to the BPF. By increasing the pump power from 130 to 350 mW, the cavity delivers a $ Q $Q-switched pulse with the central wavelength of 1560 nm whose repetition rate changes from 9.64 to 59.18 kHz for the CW direction. In the CCW direction, the repetition rate of the $ Q $Q-switched pulse changes from 10.26 to 61.03 kHz. To the best of our knowledge, it is the first time that continuous wavelength-tunable passively $ Q $Q-switched pulses have been achieved in a bidirectional erbium-doped fiber laser.

All-fiber passively mode-locked ultrafast laser based on a femtosecond-laser-inscribed in-fiber Brewster device.

We report on an in-fiber Brewster device with a 45° tilted fiber grating (TFG) directly written by a plane-by-plane femtosecond laser inscription method. Up to 10 dB polarization-dependent loss was achieved, proving effective polarizing functionality. Furthermore, we employ it as an in-line polarizer to successfully mode lock a fiber laser through the nonlinear polarization rotation technique. A stable soliton pulse train has been generated at 1563.64 nm with a pulse width of 624 fs and pulse energy of 0.42 nJ. With proper polarization adjustment, the laser also can operate in a noise-like regime. The parameters of this kind of 45°-TFG can be flexibly customized owing to the high flexibility and controllability of the femtosecond laser-inscription approach. In particular, such in-fiber polarizing devices inscribed by femtosecond laser inscription without removing the fiber coating are extremely robust for fiber lasers working at a broad wavelength region including the mid-infrared.