Diblock bottlebrush polymer in a non-polar medium: Self-assembly, surface forces, and superlubricity.

Whilst bottlebrush polymers have been studied in aqueous media for their conjectured role in biolubrication, surface forces and friction mediated by bottlebrush polymers in non-polar media have not been previously reported. Here, small-angle neutron scattering (SANS) showed that a diblock bottlebrush copolymer (oligoethyleneglycol acrylate/ethylhexyl acrylate; OEGA/EHA) formed spherical core-shell aggregates in n-dodecane (a model oil) in the polymer concentration range 0.1-2.0 wt%, with a radius of gyration Rg âˆ¼ 7 nm, comprising 40-65 polymer molecules per aggregate. The surface force apparatus (SFA) measurements revealed purely repulsive forces between surfaces bearing inhomogeneous polymer layers of thickness L âˆ¼ 13-23 nm, attributed to adsorption of a mixture of polymer chains and surface-deformed micelles. Despite the surface inhomogeneity, the polymer layers could mediate effective lubrication, demonstrating superlubricity with the friction coefficient as low as µ ∼ 0.003. The analysis of velocity-dependence of friction using the Eyring model shed light on the mechanism of the frictional process. That is, the friction mediation was consistent with the presence of nanoscopic surface aggregates, with possible contributions from a gel-like network formed by the polymer chains on the surface. These unprecedented results, correlating self-assembled polymer micelle structure with the surface forces and friction the polymer layers mediate, highlight the potential of polymers with the diblock bottlebrush architecture widespread in biological living systems, in tailoring desired surface interactions in non-polar media.

Effect of Anionic Lipids on Mammalian Plasma Cell Membrane Properties.

The effect of lipid composition on models of the inner leaflet of mammalian cell membranes has been investigated. Grazing incidence X-ray diffraction and X-ray and neutron reflectivity have been used to characterize lipid packing and solvation, while electrochemical and infrared spectroscopic methods have been employed to probe phase behavior in an applied electric field. Introducing a small quantity of the anionic lipid dimyristoylphosphatidylserine (DMPS) into bilayers of zwitterionic dimyristoylphosphatidylethanolamine (DMPE) results in a significant change in the bilayer response to an applied field: the tilt of the hydrocarbon chains increases before returning to the original tilt angle on detachment of the bilayer. Equimolar mixtures, with slightly closer chain packing, exhibit a similar but weaker response. The latter also tend to incorporate more solvent during this electrochemical phase transition, at levels similar to those of pure DMPS. Reflectivity measurements reveal greater solvation of lipid layers for DMPS > 30 mol %, matching the greater propensity for DMPS-rich bilayers to incorporate water. Taken together, the data indicate that the range of 10-35 mol % DMPS provides optimum bilayer properties (in flexibility and function as a barrier), which may explain why the DMPS content of cell membranes tends to be found within this range.

Direct Experimental Evidence for Substrate Adatom Incorporation into a Molecular Overlayer.

While the phenomenon of metal substrate adatom incorporation into molecular overlayers is generally believed to occur in several systems, the experimental evidence for this relies on the interpretation of scanning tunneling microscopy (STM) images, which can be ambiguous and provides no quantitative structural information. We show that surface X-ray diffraction (SXRD) uniquely provides unambiguous identification of these metal adatoms. We present the results of a detailed structural study of the Au(111)-F4TCNQ system, combining surface characterization by STM, low-energy electron diffraction, and soft X-ray photoelectron spectroscopy with quantitative experimental structural information from normal incidence X-ray standing wave (NIXSW) and SXRD, together with dispersion-corrected density functional theory (DFT) calculations. Excellent agreement is found between the NIXSW data and the DFT calculations regarding the height and conformation of the adsorbed molecule, which has a twisted geometry rather than the previously supposed inverted bowl shape. SXRD measurements provide unequivocal evidence for the presence and location of Au adatoms, while the DFT calculations show this reconstruction to be strongly energetically favored.

A smart and responsive crystalline porous organic cage membrane with switchable pore apertures for graded molecular sieving.

Membranes with high selectivity offer an attractive route to molecular separations, where technologies such as distillation and chromatography are energy intensive. However, it remains challenging to fine tune the structure and porosity in membranes, particularly to separate molecules of similar size. Here, we report a process for producing composite membranes that comprise crystalline porous organic cage films fabricated by interfacial synthesis on a polyacrylonitrile support. These membranes exhibit ultrafast solvent permeance and high rejection of organic dyes with molecular weights over 600 g mol-1. The crystalline cage film is dynamic, and its pore aperture can be switched in methanol to generate larger pores that provide increased methanol permeance and higher molecular weight cut-offs (1,400 g mol-1). By varying the water/methanol ratio, the film can be switched between two phases that have different selectivities, such that a single, 'smart' crystalline membrane can perform graded molecular sieving. We exemplify this by separating three organic dyes in a single-stage, single-membrane process.

Structure, Nanomechanical Properties, and Wettability of Organized Erucamide Layers on a Polypropylene Surface.

Understanding the nanostructure and nanomechanical properties of surface layers of erucamide, in particular the molecular orientation of the outermost layer, is important to its widespread use as a slip additive in polymer materials. Extending our recent observations of nanomorphologies of erucamide layers on a hydrophilic silica substrate, here we evaluate its nanostructure on a more hydrophobic polypropylene surface. Atomic force microscopy (AFM) imaging revealed the molecular packing, thickness, and surface coverage of the erucamide layers, while peak force quantitative nanomechanical mapping (QNM) showed that erucamide reduced the adhesive response on polypropylene. Synchrotron X-ray reflectivity (XRR) was used to probe the out-of-plane structure of the surface layers. Static contact angle measurements further corroborated on the resulting wettability, also demonstrating the efficacy of erucamide physisorption in facilitating control over polypropylene surface wetting. The results show the formation of erucamide monolayers, bilayers and multilayers, depending on the concentration in the spin-cast solution. Correlation of AFM, XRR and wettability results consistently points to the molecular orientation in the outermost layer, i.e. with the erucamide tails pointing outward for the surface nanostructures with different morphologies (i.e., bilayers and multilayers). Rare occurrence of monolayers with exposed hydrophilic head groups were observed only at the lowest erucamide concentration. Compared with our previous observations on the hydrophilic surface, the erucamide surface coverage was much higher on the more hydrophobic propylene surface at similar erucamide concentrations in the spin-cast solution. Furthermore, the structure, molecular orientation and nanomechanical properties of the spin-cast erucamide multilayers atop polypropylene were also similar to those on industrially relevant polypropylene fibers coated with erucamide via blooming. These findings shed light on the nanostructural features of the erucamide surface layer underpinning its nanomechanical properties, relevant to many applications in which erucamide is commonly used as a slip additive.

Heads or tails: Nanostructure and molecular orientations in organised erucamide surface layers.

HYPOTHESIS: Despite the widespread industrial usage of erucamide as a slip additive to modify polymer surface properties, a controversy appears to have persisted regarding the nanostructure of erucamide surface layers, particularly the molecular orientation at the outermost layer. The erucamide nanostructure and molecular orientation, along with its surface coverage, hydrophobicity, and adhesive response, can be tuned by simply varying the erucamide concentration in the solution from which the spin coated layer is prepared. EXPERIMENTS: Synchrotron X-ray reflectivity (XRR) allowed a comprehensive characterisation of the out-of-plane structural parameters (e.g. molecular packing and thickness) of the erucamide layers prepared via spin coating from nonaqueous solution on silica. Complementary Atomic Force Microscopy (AFM) imaging with high lateral resolution revealed localised in-plane structures. Contact angle measurements provided information on the wettability of erucamide-coated surfaces. Peak Force Quantitative Nanomechanical Mapping (QNM) allowed a correlation between the erucamide nanostructure with the surface nanomechanical properties (i.e. adhesive response). FINDINGS: Our results reveal erucamide surface nanostructures on silica as patchy monolayers, isolated circular bilayers/rounded rectangle-like aggregates and overlapping plate-like multilayers as the erucamide concentration in the spin coating solution was varied. In all the cases, XRR and AFM results were consistent with the picture that the erucamide tails were oriented outwards. The QNM adhesion force mapping of all the observed morphologies also supported this molecular orientation at the outermost erucamide monolayer. The wettability study further confirmed this conclusion with the observed increase in the surface hydrophobicity and coverage upon increasing erucamide concentration, with the macroscopic water contact angle θ = 92.9° ± 2.9° at the highest erucamide concentration of 2 wt%.

Growth and electronic properties of bi- and trilayer graphene on Ir(111).

Interesting electronic properties arise in vertically stacked graphene sheets, some of which can be controlled by mutual orientation of the adjacent layers. In this study, we investigate the MBE grown multilayer graphene on Ir(111) by means of STM, LEED and XPS and we examine the influence of the substrate on the geometric and electronic properties of bilayer graphene by employing XSW and ARPES measurements. We find that the MBE method does not limit the growth to two graphene layers and that the wrinkles, which arise through extended carbon deposition, play a crucial role in the multilayer growth. We also find that the bilayer and trilayer graphene sheets have graphitic-like properties in terms of the separation between the two layers and their stacking. The presence of the iridium substrate imposes a periodic potential induced by the moiré pattern that was found to lead to the formation of replica bands and minigaps in bilayer graphene. From tight-binding fits to our ARPES data we find that band renormalization takes place in multilayer graphene due to a weaker coupling of the upper-most graphene layer to the iridium substrate.

Interaction of a tripeptide with titania surfaces: RGD adsorption on rutile TiO2(110) and model dental implant surfaces.

The adsorption of peptides on metal oxides is an area of significant interest, both fundamentally and in a number of technologically important areas. These range from the integration of biomaterials in the body, to denaturation of protein therapeutics and the use of biomolecules and bioinspired materials in synthesis and stabilization of novel nanomaterials. Here we present a study of the tripeptide arginylglycylaspartic acid (RGD) on the surfaces of vacuum-prepared single crystalline TiO2(110), pyrocatechol-capped TiO2(110), and model SLA and SLActive dental implant samples. X-ray Photoelectron Spectroscopy and Scanning Tunneling Microscopy show that the RGD adsorption mode on the single crystal is consistent with bonding through the deprotonated carboxylate groups of the peptide to surface Ti atoms of the substrate. Despite the increased hydrophobicity of the pyrocatechol-capped TiO2(110) surface RGD adsorption from solution increases following this surface treatment. RGD adsorption on SLA and SLActive surfaces shows that the SLActive surface has a greater uptake of RGD. The RGD uptake on the pyrocatechol capped single crystal and the model implant surfaces suggest that the ease with which surface contaminant hydrocarbons are removed from the surface has a greater influence on peptide adsorption than hydrophobicity/hydrophilicity of the surface.

Water-Induced Reversal of the TiO2(011)-(2 × 1) Surface Reconstruction: Observed with in Situ Surface X-ray Diffraction.

The (011) termination of rutile TiO2 is reported to be particularly effective for photocatalysis. Here, the structure of the interface formed between this substrate and water is revealed using surface X-ray diffraction. While the TiO2(011) surface exhibits a (2 × 1) reconstruction in ultra-high vacuum (UHV), this is lifted in the presence of a multilayer of water at room temperature. This change is driven by the formation of Ti-OH at the interface, which has a bond distance of 1.93 ± 0.02 Å. The experimental solution is in good agreement with density functional theory and first-principles molecular dynamics calculations. These results point to the important differences that can arise between the structure of oxide surfaces in UHV and technical environments and will ultimately lead to an atomistic understanding of the photocatalytic process of water splitting on TiO2 surfaces.

Water Dissociates at the Aqueous Interface with Reduced Anatase TiO2 (101).

Elucidating the structure of the interface between natural (reduced) anatase TiO2 (101) and water is an essential step toward understanding the associated photoassisted water splitting mechanism. Here we present surface X-ray diffraction results for the room temperature interface with ultrathin and bulk water, which we explain by reference to density functional theory calculations. We find that both interfaces contain a 25:75 mixture of molecular H2O and terminal OH bound to titanium atoms along with bridging OH species in the contact layer. This is in complete contrast to the inert character of room temperature anatase TiO2 (101) in ultrahigh vacuum. A key difference between the ultrathin and bulk water interfaces is that in the latter water in the second layer is also ordered. These molecules are hydrogen bonded to the contact layer, modifying the bond angles.

Quantitative Structure of an Acetate Dye Molecule Analogue at the TiO2-Acetic Acid Interface.

The positions of atoms in and around acetate molecules at the rutile TiO2(110) interface with 0.1 M acetic acid have been determined with a precision of ±0.05 Å. Acetate is used as a surrogate for the carboxylate groups typically employed to anchor monocarboxylate dye molecules to TiO2 in dye-sensitized solar cells (DSSC). Structural analysis reveals small domains of ordered (2 × 1) acetate molecules, with substrate atoms closer to their bulk terminated positions compared to the clean UHV surface. Acetate is found in a bidentate bridge position, binding through both oxygen atoms to two 5-fold titanium atoms such that the molecular plane is along the [001] azimuth. Density functional theory calculations provide adsorption geometries in excellent agreement with experiment. The availability of these structural data will improve the accuracy of charge transport models for DSSC.