Long-term Stability Over 2 Years After Isolated Maxillary Orthognathic Surgery Combined With Mandibular Autorotation in Risk Patients for Condylar Resorption.

OBJECTIVE: Counterclockwise rotation of mandible can cause condylar resorption and condylar displacement posteroinferiorly after maxillary orthognathic surgery with mandibular in patients with high-angle mandibular retrognathism. This study was aimed to evaluate long-term stability >2 years and postoperative changes of condylar displacement. MATERIALS AND METHODS: In 15 patients who underwent Le Fort I osteotomy with mandibular autorotation, postoperative stability was cephalometrically investigated until 2 years. Condylar changes were analyzed with transcranial temporomandibular joint projection. Correlation between condylar displacement and surgical movement was analyzed. RESULTS: Significant clockwise relapse of mandible ( P <0.01 for SNB reduction and backward movement of point B) was observed between 6 months and >2 years after surgery, even though the values were small (0.5±0.1 degrees and 1.14±0.13 mm, respectively). The condyle was displaced posteroinferiorly immediately after surgery; however, it achieved a stable position at postoperative 6 weeks. The amount of vertical condylar displacement was significantly correlated with surgical change in mandibular posterior border sagittal angle, palatal plane angle, facial height ratio, and point B in the horizontal dimension. Greater mandibular rotation prompted more vertical condylar displacement. CONCLUSIONS: Small mandibular relapse in long term should be considered after maxillary orthognathic surgery with mandibular autorotation, although it is regarded as a surgical maneuver to minimize mandibular instability in patients susceptible to postoperative condylar resorption.

Treatment of anterior open bite and an ankylosed incisor by applying multiloop edgewise archwire, mini-implants, and dentoalveolar distraction.

An 18.7-year-old female patient with an anterior open bite and an ankylosed left maxillary central incisor was referred from a private orthodontic clinic. Canine relationships were Class II and molar relationships were Class I. The open bite was closed with the multiloop edgewise archwire and up-and-down elastics. The maxillary left central incisor was extruded by dentoalveolar distraction assisted with mini-implants. Active treatment took 2 years and 1 month, and the treatment result remained stable 14 months after debonding.

Posterior ostectomy of a mandibular distal segment for nerve bundle traction to tensionless anastomosis of an inferior alveolar nerve.

Tensionless adaptation of nerve ends is a challenging task in the repair of damaged inferior alveolar nerve (IAN). A new technique is introduced with posterior ostectomy of a mandibular distal segment after sagittal splitting for nerve bundle traction to tensionless anastomosis of nerve ends. We were able to create tensionless anastomosis of an IAN defect without autogenous or alloplastic graft using this method. This method is suitable for neurorrhaphy after neuroma removal in cases of IAN damage during dental procedures.

An Education-Counseling Program for Young Prehypertensive Adults.

In this non-equivalent control group, non-synchronized study, we assessed the effects of an education-counseling program for young prehypertensive adults. We included 40 and 47 prehypertensive individuals in the experimental and control groups, respectively. A structured questionnaire (pretest) was used to assess prehypertension-related knowledge, attitudes, health-promoting behavior, and self-efficacy. The experimental group underwent the 8-week program, while the control group received basic prehypertension and self-management education. Subsequently, blood pressure (BP) was measured, and prehypertension-related knowledge, attitudes, health-promoting behavior, and self-efficacy were evaluated using a questionnaire (posttest). There were significant intergroup differences in knowledge (t = 3.04, p = .003), attitudes (t = 6.41, p < .001), behavior (t = 11.60, p < .001), self-efficacy (t = 11.76, p < .001), and systolic BP (t = -5.49, p < .001); however, diastolic BP was not significantly different (t = -0.73, p = .473). Our findings demonstrated that the program is effective in improving knowledge, attitudes, behavior, self-efficacy, and systolic BP. Therefore, it can be used to prevent progression to hypertension.

Clinical and radiographic outcomes of dental implant after maxillary sinus floor augmentation with rhBMP-2/hydroxyapatite compared to deproteinized bovine bone.

OBJECTIVES: This study aimed to evaluate the clinical and radiographic outcomes of early implant placement and functional loading in maxillary sinus floor augmentation (MSFA) using recombinant human bone morphogenetic protein 2/hydroxyapatite (rhBMP-2/HA) and to compare these outcomes with those of the conventional protocol in MSFA using deproteinized bovine bone (DBB). MATERIALS AND METHODS: The rhBMP-2/HA and DBB groups consisted of 14 and 13 patients who underwent MSFA with BMP and DBB, respectively. After placement of 22 implants and 21 implants in the rhBMP-2/HA and DBB groups, respectively, abutment connections were performed 3 months after implant placement for the rhBMP-2/HA group and 6 months after implant placement for the DBB group. Changes in grafted sinus height (GSH), marginal bone loss (MBL), and implant stability were evaluated up to one year after functional loading. RESULTS: Survival rates for the rhBMP-2/HA and DBB groups after one year of functional loading were 90.9% and 90.5%, respectively. Both groups exhibited no significant time-course changes in GSH until one year of functional loading (rhBMP-2/HA, p = 0.124; DBB, p = 0.075). Although significant MBL occurred after one year of functional loading for both groups (rhBMP-2/HA, p < 0.001; DBB, p < 0.001), there were no significant differences in time-course changes in MBL between the two groups (p = 0.450). The mean implant stability quotient values in the rhBMP-2/HA and DBB groups were 75.3 and 75.4 after one year of functional loading, respectively, and there were no significant differences between the two groups (p = 0.557). CONCLUSIONS: MSFA using rhBMP-2/HA allowed implant rehabilitation with early implant placement and functional loading and led to a comparable survival rate and implant stability after 1 year of functional loading with acceptable MBL and stable maintenance of GSH compared to the MSFA using DBB with 6 months of healing after implant placement.

Enhanced Bone Regeneration by Bone Morphogenetic Protein-2 after Pretreatment with Low-Intensity Pulsed Ultrasound in Distraction Osteogenesis.

BACKGROUND: Bone morphogenetic protein 2 (BMP-2) and low-intensity pulsed ultrasound (LIPUS) have been used to enhance bone healing in distraction osteogenesis (DO). The aim of this study was to assess the synergistic effect of BMP-2 and LIPUS on bone regeneration in DO and to determine the optimal treatment strategy for enhanced bone regeneration. METHODS: Rat mesenchymal stromal cells were treated with various application protocols of BMP-2 and LIPUS, and cell proliferation, alkaline phosphatase activity, and osteogenesis-related marker expression were evaluated. In vivo experiments were performed in a rabbit DO model according to the application protocols with different timings of BMP-2 and LIPUS application. RESULTS: Application of BMP-2 after LIPUS pretreatment (BMP-2 after LIPUS) showed greater cell proliferation than LIPUS treatment alone, and higher ALP activity than all other treatment protocols. BMP-2 after LIPUS also exhibited increased gene expression levels of ALP, Cbfa1, and Osterix compared with LIPUS treatment alone. In vivo experiments revealed no significant differences in bone healing based on the timing of LIPUS treatment in DO. The combination of BMP-2 and LIPUS resulted in increased bone volume and bone mineral density compared with BMP-2 or LIPUS. Regarding the timing of BMP-2 application, the application of BMP-2 after LIPUS pretreatment led to greater bone volume than the application of BMP-2 before LIPUS. CONCLUSION: The results of this study suggest that the combined treatment of BMP-2 and LIPUS can lead to enhanced bone healing in DO and that effective bone healing can be achieved through the application of LIPUS before BMP-2.

Efficacy and safety of rhBMP/ß-TCP in alveolar ridge preservation: a multicenter, randomized, open-label, comparative, investigator-blinded clinical trial.

BACKGROUND: The aim of this multicenter, randomized, open-label, comparative, investigator-blinded study was to investigate the efficacy and safety of recombinant human bone morphogenetic protein 2 (rhBMP-2) combined with ß-TCP (rhBMP-2/ß-TCP) in alveolar ridge preservation. MATERIALS AND METHODS: Eighty-four subjects from three centers were enrolled in this clinical trial. After tooth extraction, rhBMP-2/ß-TCP (n = 41, test group) or ß-TCP (n = 43, control group) were grafted to the extraction socket with an absorbable barrier membrane for alveolar ridge preservation. Using computed tomography images obtained immediately after and 12 weeks after surgery, changes in the alveolar bone height and width were analyzed for each group and compared between the two groups. RESULTS: Both the test and control groups showed a significant decrease in alveolar bone height in the 12 weeks after surgery (both groups, p < 0.0001). However, the test group exhibited a significantly lower decrease in alveolar bone height than the control group (p = 0.0004). Alveolar bone width also showed significantly less resorption in the test group than in the control group for all extraction socket levels (ESL) (p = 0.0152 for 75% ESL; p < 0.0001 for 50% ESL; p < 0.0001 for 25% ESL). There were no statistically significant differences in the incidence of adverse events between the two groups. No severe adverse events occurred in either group. CONCLUSIONS: The results of this study suggest that rhBMP-2/ß-TCP is a safe graft material that provides a high alveolar bone preservation effect in patients receiving dental extraction. TRIAL REGISTRATION: Clinicaltrials.gov , NCT02714829 , Registered 22 March 2016.

A Complete Digital Workflow for Planning, Simulation, and Evaluation in Orthognathic Surgery.

The purpose of this study was to develop a complete digital workflow for planning, simulation, and evaluation for orthognathic surgery based on 3D digital natural head position reproduction, a cloud-based collaboration platform, and 3D landmark-based evaluation. We included 24 patients who underwent bimaxillary orthognathic surgery. Surgeons and engineers could share the massive image data immediately and conveniently and collaborate closely in surgical planning and simulation using a cloud-based platform. The digital surgical splint could be optimized for a specific patient before or after the physical fabrication of 3D printing splints through close collaboration. The surgical accuracy was evaluated comprehensively via the translational (linear) and rotational (angular) discrepancies between identical 3D landmarks on the simulation and postoperative computed tomography (CT) models. The means of the absolute linear discrepancy at eight tooth landmarks were 0.61 ± 0.55, 0.86 ± 0.68, and 1.00 ± 0.79 mm in left-right, advance-setback, and impaction-elongation directions, respectively, and 1.67 mm in the root mean square direction. The linear discrepancy in the left-right direction was significantly different from the other two directions as shown by analysis of variance (ANOVA, p < 0.05). The means of the absolute angular discrepancies were 1.43 ± 1.06°, 0.50 ± 0.31°, and 0.58 ± 0.41° in the pitch, roll, and yaw orientations, respectively. The angular discrepancy in the pitch orientation was significantly different from the other two orientations (ANOVA, p < 0.05). The complete digital workflow that we developed for orthognathic patients provides efficient and streamlined procedures for orthognathic surgery and shows high surgical accuracy with efficient image data sharing and close collaboration.

Robot-Assisted Maxillary Positioning in Orthognathic Surgery: A Feasibility and Accuracy Evaluation.

Several methods enabling independent repositioning of the maxilla have been introduced to reduce intraoperative errors inherent in the intermediate splint. However, the accuracy is still to be improved and a different approach without time-consuming laboratory process is needed, which can allow perioperative modification of unoptimized maxillary position. The purpose of this study is to assess the feasibility and accuracy of a robot arm combined with intraoperative image-guided navigation in orthognathic surgery. The experiments were performed on 12 full skull phantom models. After Le Fort I osteotomy, the maxillary segment was repositioned to a different target position using a robot arm and image-guided navigation and stabilized. Using the navigation and the postoperative computed tomography (CT) images, the achieved maxillary position was compared with the planned position. Although the maxilla showed mild displacement during the fixation, the mean absolute deviations from the target position were 0.16 mm, 0.18 mm, and 0.20 mm in medio-lateral, antero-posterior, and supero-inferior directions, respectively, in the intraoperative navigation. Compared with the target position using postoperative CT, the achieved maxillary position had a mean absolute deviation of less than 0.5 mm for all dimensions and the mean root mean square deviation was 0.79 mm. The results of this study suggest that the robot arm combined with the intraoperative image-guided navigation may have great potential for surgical plan transfer with the accurate repositioning of the maxilla in the orthognathic surgery.

Comparison of condylar displacement after sagittal split ramus osteotomy depending on the glenoid fossa depth.

This study aimed to evaluate the relationship between postoperative condylar displacement (PCD) after sagittal split ramus osteotomy (SSRO) and the glenoid fossa depth. A total of 29 patients who underwent computed tomography (CT) before surgery (T0), immediately after (T1), and 6 months after (T2) surgery were studied. The fossa depth was measured, and the amount of displaced condylar center and axis were evaluated on CT at T0, T1, and T2 using three-dimensional analysis software. PCD and the fossa depth relationship was investigated by Pearson's correlation analysis. The fossa depth varied from 3.9 mm to 12.0 mm, and the mean value was 8.15 ± 1.60 mm. The condylar center was displaced by 1.12 ± 0.66 mm at T1 compared with it at T0. The amount of displaced condylar center negatively correlated with the fossa depth (r = -0.424, p = 0.001). The displacement of the condylar center between T0 and T2 was 0.85 ± 0.51 mm. The amount of condylar center displacement between T0 and T1 showed a positive correlation with it between T0 and T2 (r = 0.481, p < 0.001). In conclusion, more attention is needed in patients with small fossa depth during condylar repositioning after SSRO and postoperative management to minimize complications.

Quantitative Augmented Reality-Assisted Free-Hand Orthognathic Surgery Using Electromagnetic Tracking and Skin-Attached Dynamic Reference.

The purpose of this study was to develop a quantitative AR-assisted free-hand orthognathic surgery method using electromagnetic (EM) tracking and skin-attached dynamic reference. The authors proposed a novel, simplified, and convenient workflow for augmented reality (AR)-assisted orthognathic surgery based on optical marker-less tracking, a comfortable display, and a non-invasive, skin-attached dynamic reference frame. The 2 registrations between the physical (EM tracking) and CT image spaces and between the physical and AR camera spaces, essential processes in AR-assisted surgery, were pre-operatively performed using the registration body complex and 3D depth camera. The intraoperative model of the maxillary bone segment (MBS) was superimposed on the real patient image with the simulated goal model on a flat-panel display, and the MBS was freely handled for repositioning with respect to the skin-attached dynamic reference tool (SRT) with quantitative visualization of landmarks of interest using only EM tracking. To evaluate the accuracy of AR-assisted Le Fort I surgery, the MBS of the phantom was simulated and repositioned by 6 translational and three rotational movements. The mean absolute deviations (MADs) between the simulation and post-operative positions of MBS landmarks by the SRT were 0.20, 0.34, 0.29, and 0.55 mm in x- (left lateral, right lateral), y- (setback, advance), and z- (impaction, elongation) directions, and RMS, respectively, while those by the BRT were 0.23, 0.37, 0.30, and 0.60 mm. There were no significant differences between the translation and rotation surgeries or among surgeries in the x-, y-, and z-axes for the SRT. The MADs in the x-, y-, and z-axes exhibited no significant differences between the SRT and BRT. The developed method showed high accuracy and reliability in free-hand orthognathic surgery using EM tracking and skin-attached dynamic reference.

Implantable electrical stimulation bioreactor with liquid crystal polymer-based electrodes for enhanced bone regeneration at mandibular large defects in rabbit.

The osseous regeneration of large bone defects is still a major clinical challenge in maxillofacial and orthopedic surgery. Previous studies demonstrated that biphasic electrical stimulation (ES) stimulates bone formation; however, polyimide electrode should be removed after regeneration. This study presents an implantable electrical stimulation bioreactor with electrodes based on liquid crystal polymer (LCP), which can be permanently implanted due to excellent biocompatibility to bone tissue. The bioreactor was implanted into a critical-sized bone defect and subjected to ES for one week, where bone regeneration was evaluated four weeks after surgery using micro-CT. The effect of ES via the bioreactor was compared with a sham control group and a positive control group that received recombinant human bone morphogenetic protein (rhBMP)-2 (20 µg). New bone volume per tissue volume (BV/TV) in the ES and rhBMP-2 groups increased to 132% (p < 0.05) and 174% (p < 0.01), respectively, compared to that in the sham control group. In the histological evaluation, there was no inflammation within the bone defects and adjacent to LCP in all the groups. This study showed that the ES bioreactor with LCP electrodes could enhance bone regeneration at large bone defects, where LCP can act as a mechanically resistant outer box without inflammation. Graphical abstract To enhance bone regeneration, a bioreactor comprising collagen sponge and liquid crystal polymer-based electrode was implanted in the bone defect. Within the defect, electrical current pulses having biphasic waveform were applied from the implanted bioreactor.

Effects of 17ß-Estradiol Deficiency and Mechanical Overload on Osseous Changes in the Rat Temporomandibular Joint.

PURPOSE: To deduce the contributing factors to idiopathic condylar resorption in young female patients, we hypothesized that 17ß-estradiol (E2) deficiency would cause arthritic changes in the mandibular condyle under mechanical overloading in a rat model. We also hypothesized that osseous changes in the microstructure by the combination of E2 deficiency and mechanical overloading would be different depending on the region of the condyle. MATERIALS AND METHODS: The mandibular condyles of female Sprague-Dawley rats were mechanically overloaded (50g) 8 weeks after an ovariectomy (OVX). Changes in the condyles were analyzed with micro-computed tomography and histochemical and immunohistochemical staining. RESULTS: The size of the mandibular condyle decreased significantly with OVX or mechanical loading. The incidence of arthritic changes, including osteophyte formation, bone erosion, and flattening, was significantly different between the sham and OVX groups. The posterior parts of the condyles showed poor bone quality before OVX, and their condition significantly worsened with reduced bone mineral density and bone volume/tissue volume, as well as a sparse trabecular pattern. CONCLUSIONS: E2 deficiency and mechanical overloading of the temporomandibular joint cause morphologic changes in the mandibular condyle and changes in the osseous microstructure, which are more apparent in areas of poor bone quality.

Horizontal change of philtrum after orthognathic surgery in patients with facial asymmetry.

BACKGROUND: Soft tissue asymmetry such as lip canting or deviation of the philtrum is an important influencing factor for unbalanced facial appearance. Lip canting could be improved by the correction of the occlusal canting or positional change of the mentum. Although there are many studies about changes of lip canting, however, postoperative changes of philtrum deviation have not been yet reported. In this study, we investigate the positional change of the philtrum after orthognathic surgery and influencing factors. METHODS: Positional change of the philtrum was evaluated in 41 patients with facial asymmetry who underwent bimaxillary surgery, in relation to other anatomical soft tissue landmarks using a frontal clinical photo. The surgical movement of the maxillary and mandibular dental midline and canting were measured in postero-anterior cephalogram before and 1 day after surgery. The same procedure was repeated in patients with more than 1.5 mm perioperative change of the mandibular dental midline after bimaxillary surgery. RESULTS: Maxillary dental midline shifting and canting correction did not have a significant correlation with lateral movement of the philtrum midline. However, the mandibular shift had a statistically significant correlation with a lateral movement of the philtrum (p < 0.05) as well as other linear parameters and angle values. CONCLUSION: The horizontal change of the philtrum is influenced by lateral mandibular movement in patients with facial asymmetry, rather than maxillary lateral movement.

Change of the upper airway after mandibular setback surgery in patients with mandibular prognathism and anterior open bite.

PURPOSE: It has been reported before that the amount of pharyngeal airway space (PAS) significantly decreases following mandibular setback (MS) surgery in patients with mandibular prognathism (MP). Further, MP patients with an anterior open-bite (AOB) presentation may show a larger decrease in PAS compared with those without AOB. However, studies on postoperative PAS changes in MP patients with AOB remain rare. This study sought to evaluate changes in PAS and hyoid bone positioning following MS surgery in MP patients with and without AOB. PATIENTS AND METHODS: Twenty patients who underwent two jaw surgery involving MS movement were included. Patients were divided into a non-AOB group (n = 10; overbite > 2 mm) and an AOB group (n = 10; overbite < - 4 mm). Three-dimensional changes in PAS and hyoid bone positioning were compared and statistically evaluated pre- and postoperatively using computed tomography (CT). RESULTS: The mean magnitude of MS was 6.0 ± 2.8 mm and 5.6 ± 3.2 mm in the non-AOB group and AOB group, respectively. The oropharyngeal volume and upper hypopharyngeal volume were significantly reduced after surgery in both the groups (p = 0.006 and p = 0.003), while the retroglossal cross-sectional area was significantly reduced only in the AOB group (p = 0.028). Although the AOB group showed a larger decrease in PAS, the difference was not statistically significant between the groups. The position of the hyoid bone showed significant posterior and inferior displacement only in the AOB group, while the vertical displacement of the hyoid bone showed a statistically significant difference between the two groups. CONCLUSION: PAS was significantly decreased after MS in both the groups, while only the AOB group presented a statistically significant reduction in the retroglossal cross-sectional area. Vertical displacement of the hyoid bone showed a statistically significant difference between the groups, while the PAS change was not. Surgeons should be aware of potential postoperative airway problems that may arise when performing MS surgeries.

Effect of bFGF and fibroblasts combined with hyaluronic acid-based hydrogels on soft tissue augmentation: an experimental study in rats.

BACKGROUND: Hyaluronic acid (HA) has been applied as a primary biomaterial for temporary soft tissue augmentation and as a carrier for cells and the delivery of growth factors to promote tissue regeneration. Although HA derivatives are the most versatile soft tissue fillers on the market, they are resorbed early, within 3 to 12 months. To overcome their short duration, they can be combined with cells or growth factors. The purpose of this study was to investigate the stimulating effects of human fibroblasts and basic fibroblast growth factors (bFGF) on collagen synthesis during soft tissue augmentation by HA hydrogels and to compare these with the effects of a commercial HA derivative (Restylane®). METHODS: The hydrogel group included four conditions. The first condition consisted of hydrogel (H) alone as a negative control, and the other three conditions were bFGF-containing hydrogel (HB), human fibroblast-containing hydrogel (HF), and human fibroblast/bFGF-containing hydrogel (HBF). In the Restylane® group (HGF), the hydrogel was replaced with Restylane® (R, RB, RF, RBF). The gels were implanted subdermally into the back of each nude mouse at four separate sites. Twelve nude mice were used for the hydrogel (n = 6) and Restylane® groups (n = 6). The specimens were harvested 8 weeks after implantation and assessed histomorphometrically, and collagen synthesis was evaluated by RT-PCR. RESULTS: The hydrogel group showed good biocompatibility with the surrounding tissues and stimulated the formation of a fibrous matrix. HBF and HF showed significantly higher soft tissue synthesis compared to H (p < 0.05), and human collagen type I was well expressed in HB, HF, and HBF; HBF showed the strongest expression. The Restylane® filler was surrounded by a fibrous capsule without any soft tissue infiltration from the neighboring tissue, and collagen synthesis within the Restylane® filler could not be observed, even though no inflammatory reactions were observed. CONCLUSION: This study revealed that HA-based hydrogel alone or hydrogel combined with fibroblasts and/or bFGF can be effectively used for soft tissue augmentation.

Void space and long-term volumetric changes of maxillary sinus floor augmentation with comparison between hydroxyapatite soaked with bone morphogenetic protein 2 and anorganic bovine xenograft alone.

PURPOSE: We hypothesized that the void volume after maxillary sinus floor augmentation (MSFA) with recombinant human bone morphogenetic protein-2 (rhBMP-2) would be larger than that without rhBMP-2, and filled with bone in the long term. The aim of this study was to analyze the occurrence of void space and long-term volumetric changes after MSFA with rhBMP-2 and hydroxyapatite (BMP-2/H). MATERIAL AND METHODS: In 25 subjects, MSFA was performed with BMP-2/H (group I) or an anorganic bovine xenograft (group II). Computed tomography scans were taken twice, at 3 months (T1) and at least 24 months (T2) after surgery. Total volume (TV), bone volume (BV), and void volume (VV) were measured and analysed statistically. RESULTS: While similar amounts of graft material were used, the TV was significantly larger in group I than in group II (p = 0.014). The VV showed a tendency to be larger in group I than in group II. VV reduction up to T2 was significantly greater in group I than in group II. Consequently, the BV at T2 was significantly greater in group I than in group II by 36% (p = 0.014). CONCLUSION: This study showed that our hypothesis was valid. rhBMP-2 is effective for long-term bone regeneration after MSFA.

Real-time augmented model guidance for mandibular proximal segment repositioning in orthognathic surgery, using electromagnetic tracking.

It is essential to reposition the mandibular proximal segment (MPS) as close to its original position as possible during orthognathic surgery. Conventional methods cannot pinpoint the exact position of the condyle in the fossa in real time during repositioning. In this study, based on an improved registration method and a separable electromagnetic tracking tool, we developed a real-time, augmented, model-guided method for MPS surgery to reposition the condyle into its original position more accurately. After virtual surgery planning, using a complex maxillomandibular model, the final position of the virtual MPS model was simulated via 3D rotations. The displacements resulting from the MPS simulation were applied to the MPS landmarks to indicate their final postoperative positions. We designed a new registration body with 24 fiducial points for registration, and determined the optimal point group on the registration body through a phantom study. The registration between the patient's CT image and physical spaces was performed preoperatively using the optimal points. We also developed a separable frame for installing the electromagnetic tracking tool on the patient's MPS. During MPS surgery, the electromagnetic tracking tool was repeatedly attached to, and separated from, the MPS using the separable frame. The MPS movement resulting from the surgeon's manipulation was tracked by the electromagnetic tracking system. The augmented condyle model and its landmarks were visualized continuously in real time with respect to the simulated model and landmarks. Our method also provides augmented 3D coronal and sagittal views of the fossa and condyle, to allow the surgeon to examine the 3D condyle-fossa positional relationship more accurately. The root mean square differences between the simulated and intraoperative MPS models, and between the simulated and postoperative CT models, were 1.71 ± 0.63 mm and 1.89 ± 0.22 mm respectively at three condylar landmarks. Thus, the surgeons could perform MPS repositioning conveniently and accurately based on real-time augmented model guidance on the 3D condyle positional relationship with respect to the glenoid fossa, using augmented and simulated models and landmarks.

Accuracy of 3D reproduction of natural head position using three different manual reorientation methods compared to 3D software.

PURPOSE: The aim of this study was to analyze the positional differences of three-dimensional (3D) natural head positions (NHPs) reproduced by three different manual reorientation methods without special software by the Pose from Orthography and Scaling with ITerations (POSIT) method. METHODS: Five ceramic markers were attached to each of 12 patients' faces, and frontal and lateral photographs in the NHP and 3D computed tomography (CT) were taken. The 3D surface model was reoriented for the NHP reproduction by four different methods: the POSIT method (standard method), the location of the markers (A), the soft tissue landmarks (B) on the photographs, and manual correction without photographs (C). On each 3D surface model, the location of the skull was evaluated three-dimensionally. RESULTS: Differences between reproduced NHPs in each of the four different methods were statistically significant (p < 0.0001). Compared to the POSIT method, the accuracy of the other reproducing methods was lower. The A and B methods showed a similar accuracy to each other, while the C method presented the most inaccurate NHP. CONCLUSION: If 3D NHP reproduction using special software is impossible, reproducing NHP with photographs may be used as an alternative method, but its application should be clinically limited.

Relapse related to pushing and rebounding action in maxillary anterior downgraft with mandibular setback surgery.

PURPOSE: Maxillary downgraft (MD) and mandibular setback (MS) are problematic procedures in terms of postoperative stability. While the amount of intraoperative clockwise rotation (CWR) of the proximal segment (PS) after MS combined with MD has a positive correlation with the amount of MD, mandibular relapse after MS with MD in relation to intraoperative CWR of the PS has not been reported. Moreover, the effect of mandibular relapse on maxillary stability after MS with MD remains unclear. The purpose of this study is to evaluate mandibular and maxillary stability after MS with MD in relation to intraoperative CWR of the PS and amount of MD. MATERIALS AND METHODS: The study included 57 patients who underwent bimaxillary orthognathic surgery. Patients were classified into two groups according to whether MD was performed or not performed: Group I had 2 mm or more MD; and Group II had less than 2 mm MD including vertical impaction or no vertical changes. The amount of surgical movement and postoperative relapse were cephalometrically evaluated and statistically analyzed. RESULTS: There was no significant difference in MS between Groups I and II, however, the vertical movement of the maxilla was different significantly (p < 0.001). In Group I, the intraoperative CWR and postoperative CCWR of the PS was greater than that of Group II (p = 0.010; p < 0.001, respectively). Consequently, the anterior relapse of the mandible was greater in Group I than in Group II despite the same amount of MS in Groups I and II. In Group I, with direct bone contact using Le Fort I inclined osteotomy, vertical relapse at point A showed no statistical correlation with anterior relapse at point B, while the vertical and horizontal dental relapse at U1 showed significant correlations with anterior relapse at point B (r = -0.403, p = 0.030; r = 0.581, p < 0.001, respectively). CONCLUSION: For more stable results, Le Fort I inclined osteotomy is recommended to obtain direct bone contact when moving the maxilla inferiorly. The PS must also be fixed while maintaining vertical bone step to prevent CWR.