Visible light-driven molecular oxygen activation for oxidative amidation of alcohols using lead-free metal halide perovskite.

Herein, we report the modulation of the band structures of halide perovskite Cs2CuBr4 by tuning the synthesis methods. The photocatalyst PC-1, synthesized by the hot injection method, has a more negative conduction band minima (CBM) than the photocatalyst PC-2, synthesized at room temperature. As a result, PC-1 can activate molecular O2 more efficiently to initiate the radical-mediated dehydrogenation of alcohols. The more positive valence band maxima (VBM) of PC-1 also facilitates amine oxidation to the corresponding radical. Further, improved charge separation and transport and a decrement in the photogenerated charge carrier recombination have been detected for PC-1 to enhance photocatalytic activity. PC-1 showed improved yields for a series of structurally diverse amides (highest yield = 98%) by oxidative amidation of alcohols under visible light irradiation.

Structural modification of nickel tetra(thiocyano)corroles during electrochemical water oxidation.

In this study, we present two fully characterized nickel tetrathiocyanocorroles, representing a novel class of 3d-metallocorroles. These nickel(II) ions form square planar complexes, exhibiting a d8-electronic configuration. These anionic complexes are stabilized by the electron-withdrawing SCN groups on the bipyrrole unit of the corrole. The reduced aromaticity in these anionic nickel(II) corrole complexes is evidenced by single crystal X-ray diffraction (XRD) data and a markedly altered absorption profile, with stronger Q bands compared to Soret bands. Notably, the UV-Vis and electrochemical data exhibit significant differences from previously reported nickel(II) corrole radical cation and nickel(II) porphyrin complexes. While these electrochemical data bear a resemblance to those of the anionic nickel(II) corrole by Gross et al., the UV-Vis data show substantial distinctions. Additionally, we explore the utilization of nickel(II)-corrole@CC (where CC denotes carbon cloth) as an electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium. During electrochemical water oxidation, the molecular catalyst is partially converted to nickel (oxy)hydroxide, Ni(O)OH. The structure reveals the coexistence of the molecular complex and Ni(O)OH in the active catalyst, achieving a turnover frequency (TOF) of 3.32 × 10-2 s-1. The synergy between the homogeneous and heterogeneous phases improves the OER activity, providing more active sites and edge sites and enhancing interfacial charge transfer.

Deciphering charge transfer dynamics of a lead halide perovskite-nickel(ii) complex for visible light photoredox C-N coupling.

Photoredox catalysis involving perovskite quantum dots (QDs) has gained enormous attention because of their high efficiency and selectivity. In this study, we have demonstrated CsPbBr3 QDs as photocatalysts for the C-N bond formation reaction. The introduction of Ni(dmgH)2 (dmgH = dimethyl glyoximato) as a cocatalyst with CsPbBr3 QDs facilitates photocatalytic C-N coupling to form a wide variety of amides. The optimized interaction between the cocatalyst and photocatalyst enhances charge transfer and mitigates charge recombination, ultimately boosting photocatalytic performance. The photocatalytic activity is notably influenced by the variation in the amount of cocatalyst and 7 wt% Ni(dmgH)2 produces the best yield (92%) of amide. Femtosecond transient absorption spectroscopy reveals that the dynamics of the trap states of QDs are affected by cocatalyst. Further, Ni(dmgH)2 facilitates molecular oxygen activation to form superoxide radicals, which further initiates the radical pathway for the C-N coupling.

Nitrate-coordinated FeNi(OH)2 for hydrazine oxidation assisted seawater splitting at the industrial-level current density.

In this study, we developed a nitrate-coordinated iron-nickel hydroxide [NC-FeNi(OH)2] catalyst for hydrazine oxidation-assisted seawater splitting. Replacement of O2 evolution by hydrazine oxidation in a two-electrode setup resulted in a cell voltage of 1.20 V at 100 mA cm-2. This represents a voltage reduction of 470 mV compared to conventional seawater splitting. Additionally, NC-FeNi(OH)2 demonstrated remarkable stability over a period of 60 hours.

Superior electrocatalytic hydrogen evolution activity of a triply bridged diruthenium(II) complex on a carbon cloth support.

This article describes the structural authentication of a unique triply bridged [1](ClO4)2 and monomeric [2]ClO4/[3]ClO4. Electrochemical HER on a carbon cloth support demonstrated the superior performance of [1](ClO4)2 with high TON (>105) and its long-term stability. The primary kinetic isotope effect of [1](ClO4)2 revealed the involvement of PCET in the rate-determining step.

Dual-Mode Virus Detection: Combining Electrochemical and Fluorescence Modalities for Enhanced Sensitivity and Reliability.

This study introduces a dual-mode biosensor specifically designed for the quantitative detection of viruses in rapid analysis. The biosensor is unique in its use of both optical (fluorescence) and electrochemical (impedance) detection methods using the same nanocomposites, providing a dual confirmation system for virus (norovirus-like particles) quantification. The system is based on using two antibody-conjugated nanocomposites: CdSeS quantum dots and Au-N,S-GQD nanocomposites. For optical detection, the principle relies on the fluorescence quenching of CdSeS by Au-N,S-GQD in a sandwich structure with the target. Conversely, electrochemical detection is based on the change in impedance caused by the formation of the same sandwich structure. The biosensor demonstrated exceptional sensitivity, capable of detecting norovirus at concentrations of as low as femtomolar in the electrochemical method and picomolar in the optical method. In the dual-responsive concentration range from 10-13 to 10-10 M, the sensor is highly sensitive in both methods, creating significant changes in fluorescence intensity and impedance in the presence of virus. Furthermore, the biosensor exhibits a high degree of specificity, with a negligible response to nontarget proteins, even within complex test solutions. This work represents a significant advancement in the field of biosensor technology, offering a fast, accurate, and reliable method for diagnosing viral infections and diseases.

The low loading of metal in metal-organic framework-derived NiNx@NC promotes amide formation through C-N coupling.

The pyrolysis of Ni-substituted zeolitic imidazolate framework-8 produces NiNx@NC with an ultra-low loading of Ni (7.4 × 10-6 mol%). The Ni-N coordination, subnanometer particle size, and uniform distribution of NiNx on the NC support lead to excellent catalytic activity (TON = 2702) and selectivity for the amination of aldehydes to produce amides.

The isomer-sensitive electrochemical HER of ruthenium(II)-hydrido complexes involving redox-active azoheteroaromatics.

The article deals with the development of isomeric ruthenium(II)-hydrido complexes [RuII(H)(L1)(PPh3)2(CO)]ClO4 ([1a]ClO4-[1b]ClO4)/[RuII(H)(L2)(PPh3)2(CO)]ClO4 ([2a]ClO4-[2b]ClO4) involving azo coupled L1 [L1: (E)-1,2-bis(1-methyl-1H-pyrazol-3-yl)diazene]/L2 [L2: (E)-1,2-bis(4-iodo-1-methyl-1H-pyrazol-3-yl)diazene], respectively. Structural evaluation of the complexes affirmed the syn conformation of the coordinated/uncoordinated pyrazole groups of L and its unperturbed neutral azo (NN) state. Isomeric forms in [1a]ClO4/[1b]ClO4 or [2a]ClO4/[2b]ClO4 differed with respect to the cis and trans orientations of the coordinated CO and N(azo) donor of L, respectively. It also demonstrated the formation of intermolecular hydrogen-bonded dimeric or 1D-polymeric chains in [1a]ClO4/[2b]ClO4 or [1b]ClO4, respectively. Successive two-electron reductions of the complexes varied to an appreciable extent as a function of the heterocycles connected to L. The involvement of the azo function of L towards the reductions ([NN]0 → [NN]˙- → [NN]2-) was supported by the DFT calculated MOs and Mulliken spin density at the paramagnetic state, which was further validated by the radical EPR profile of the first reduced (S = 1/2) state. Isomeric [1a]ClO4/[1b]ClO4 or [2a]ClO4/[2b]ClO4 immobilised on the carbon cloth support underwent various electrochemical acidic HERs (hydrogen evolution reactions) with TOF/10-1 s-1: [1a]ClO4 (0.83) > [1b]ClO4 (0.68) > [2a]ClO4 (0.50) > [2b]ClO4 (0.37).

Metal-organic framework-derived CoNx nanoparticles on N-doped carbon for selective N-alkylation of aniline.

N-alkylation of anilines by alcohols can be used as an efficient strategy to synthesise a wide range of secondary amines. In this respect, a hydrogen borrowing methodology has been explored using precious metal-based catalysts. However, the utilisation of cheap and readily available transition metal based catalysts is required for large-scale applications. In this work, we have reported metal-organic framework-derived CoNx@NC catalysts for the selective N-alkylation of anilines with different types of alcohols. The Co-N coordination in CoNx@NC was found to be extremely important to improve the conversion efficiency and yield of the product. As a result, CoNx@NC produced 99% yield of the desired amines, which is far better than that of Co@C (yield = 65%). In addition, CoNx@NC showed remarkable recyclability for six cycles with a minimum drop in the yield of the desired product.

C-H Bond Activation by an Antimony(V) Oxo Intermediate Accessed through Electrochemical Oxidation of Antimony(III) Tetrakis(thiocyano)corrole.

A new class of antimony(III) corroles has been described. The photophysical properties of these newly synthesized tetrakis(thiocyano)corrolatoantimony(III) derivatives having four SCN groups on the bipyrrole unit of corrole are drastically altered compared to their ß-unsubstituted corrolatoantimony(III) analogues. The UV-vis and emission spectra of tetrakis(thiocyano)corrolatoantimony(III) derivatives are significantly red-shifted (roughly 30-40 nm) in comparison with their ß-unsubstituted corrolatoantimony(III) derivatives. The Q bands are significantly strengthened. The intensity of the most prominent Q band is roughly 70% that of the Soret band and absorbs strongly at the far-red region, i.e., at 700-720 nm. These molecules emit light in the near-infrared region (700-900 nm). Tetrakis(thiocyano)corrolatoantimony(III) undergoes electrochemical anodic oxidation to form SbV═O species, which facilitates electrocatalytic oxygen evolution reaction (OER) and the activation of benzylic C-H to produce benzoic acid selectively. Under optimized conditions, SbIII-corrole@NF (NF = nickel foam) required an overpotential of 380 mV to reach a 50 mA cm-2 current density, comparable with those of other transition-metal-based complexes. On the other hand, replacing the anodic OER with benzyl alcohol oxidation lowered the required potential by 150 mV (at 300 mA cm-2) to improve the energy efficiency of the electrochemical process.

4f-2p-3d orbital overlap in a metal-organic framework-derived CeO2/CeCo-LDH heterostructure promotes water oxidation.

Herein, we have demonstrated a facile method for the synthesis of CeO2/Ce-Co-LDH heterostructures using zeolitic imidazolate framework-67 as the precursor. The Ce-incorporation in Co-LDH results in 4f-2p-3d orbital overlap to tune the electronic structure whereas the oxygen-deficient CeO2 controls the interface charge transfer. This results in excellent water oxidation activity to attain 500 mA cm-2 current density at 320 overpotential.

Visible light induced regioselective C-3 thiocyanation of imidazoheterocycles through naphthalimide dye based photoredox catalysis.

A visible light induced C-3 thiocyanation of imidazo[1,2-a]pyridines by using a naphthalimide based photoredox catalyst has been reported. Tolerance of electron withdrawing and donating groups at different positions of the imidazo[1,2-a]pyridine ring led to a wide substrate accessibility of this method. This methodology is further reproducible with other heterocycles like benzo[d]imidazo[2,1-b]thiazoles, indoles, azaindoles, and anilines.

Nitrogen substitution induced lattice contraction in nickel nanoparticles for electrochemical hydrogen evolution from simulated seawater.

Herein, we demonstrate a facile method for the introduction of nitrogen in the lattices of nickel nanoparticles to form NiNx (x = 0.13, 0.20, 0.27). X-ray absorption spectroscopy reveals the contraction of the Ni-Ni bond and modulated coordination environment after nitrogen introduction. The NiN0.20 required 87 mV overpotential for -10 mA cm-2 cathodic current density in simulated seawater. The density functional theory calculations revealed favorable EH2Oads and ΔGHads after N-introduction.

Iron(III) ion-assisted transformation of ZIF-67 to a self-supported FexCo-layered double hydroxide for improved water oxidation.

Herein, we have demonstrated Lewis acid Fe(III)-assisted hydroxylation of ZIF-67 to form FexCo-layered double hydroxide (LDH) nanosheets. The catalyst Fe0.4Co-LDH produced an excellent water oxidation activity to reach a current density of 20 mA cm-2 at only 190 mV overpotential, superior to that of hydrothermally synthesized LDH with a similar composition.

Exploring Ligand-Controlled C2 Product Selectivity in Carbon Dioxide Reduction with Copper Metal-Organic Framework Nanosheets.

The suitable choice of an electrocatalyst is crucial in controlling the selectivity of electrocatalytic CO2 reduction products. Herein, we have explored the effect of different ligand environments in 2D metal-organic frameworks (MOFs), viz., copper naphthalenedicarboxylate (Cu-UNDC) and copper benzenedicarboxylate (Cu-UBDC). The change of ligand modulates the structure of the MOFs as well as the electronic environment around the copper center. The variation in the electronic structure and the coordination environment of the active Cu center changes the selectivity toward C2 products. In the electrocatalytic process, Cu-UNDC produced 24.3% Faradaic efficiency (FE) for the C2 products─far better than that of Cu-UBDC (13.2%). In contrast to electrocatalytic CO2RR, in the presence of light, Cu-UBDC (26.2%) achieved a better FE for the C2 products than Cu-UNDC (21.8%).

Chlorocobaloxime containing N-(4-pyridylmethyl)-1,8-naphthalamide peripheral ligands: synthesis, characterization and enhanced electrochemical hydrogen evolution in alkaline medium.

Two new discrete cobaloxime based complexes with the general formula [ClCo(dioxime)2L] (1 and 2), L1 = N-(4-pyridylmethyl)-1,8-naphthalamide, L2 = 4-bromo-N-(4-pyridylmethyl)-1,8-naphthalamide have been synthesized and characterized by various spectroscopic techniques such as FT-IR, 1H, 13C{1H} NMR and PXRD. The molecular structures of both complexes have also been determined using single crystal X-ray crystallography. The solid state molecular structures revealed distorted octahedral geometry around the Co(III) central metal ion with two dioximes in the equatorial plane and axial positions are occupied by chloro and pyridine nitrogen of N-(4-pyridylmethyl)-1,8-naphthalamide ligands. Both complexes exhibit weaker non-covalent interactions (C-H⋯O, C-H⋯Cl and C-H⋯π(Centroid) in complex 1 whereas C-H⋯O and C-H⋯Br in complex 2) resulting in the formation of dimeric and 1D supramolecular structures. Furthermore, these complexes are immobilized onto the surface of activated carbon cloth (CC) and their electrocatalytic performance for the hydrogen evolution reaction (HER) has been investigated in alkaline and acidic media as well as buffer solution. In alkaline medium, we found that complex 2 exhibited impressive electrocatalytic HER activity and produced a current density of -10 mA cm-2 at an overpotential of 260 mV, whereas complex 1 produced the same current density at an overpotential of 334 mV. An electrochemical impedance spectroscopy (EIS) spectral study revealed the faster charge transfer kinetics of complex 2 than that of complex 1. Similarly, the low Tafel slope (100 mV dec-1) for the HER with complex 2 indicates faster HER kinetics compared to complex 1. The chronoamperometric study showed that complex 2 is stable under electrocatalytic HER conditions for 5 h without losing the initial current density and it has also been established that the complex structure is retained after electrocatalysis.

Ruthenium Azobis(benzothiazole): Electronic Structure and Impact of Substituents on the Electrocatalytic Single-Site Water Oxidation Process.

The present article deals with the structurally and spectroelectrochemically characterized newer class of ruthenium-azoheteroarenes [RuII(Ph-trpy)(Cl)(L)]ClO4, [1]ClO4-[3]ClO4 (Ph-trpy: 4'-phenyl-2,2':6',2″-terpyridine; L1: 2,2'-azobis(benzothiazole) ([1]ClO4); L2: 2,2'-azobis(6-methylbenzothiazole) ([2]ClO4); L3: 2,2'-azobis(6-chlorobenzothiazole) ([3]ClO4)). A collective consideration of experimental (i.e., structural and spectroelectrochemical) and theoretical (DFT calculations) results of [1]ClO4-[3]ClO4 established selective stabilization of (i) the unperturbed azo (N═N)0 function of L, (ii) the exclusive presence of the isomeric form involving the N(azo) donor of L trans to Cl, and (iii) the presence of extended, hydrogen-bonded trimeric units in the asymmetric unit of [2]ClO4 (CH---O) via the involvement of ClO4- anions. The detailed electrochemical studies revealed metal-based oxidation of [RuII(Ph-trpy)(Cl)(L)]+ (1+-3+) to [RuIII(Ph-trpy)(Cl)(L)]2+ (12+-32+); however, the electronic form of the first reduced state (1-3) could be better represented by its mixed RuII(Ph-trpy)(Cl)(L•-)/RuIII(Ph-trpy)(Cl)(L2-) state. Both native (1+-3+) and reduced (1-3) states exhibited weak lower energy transitions within the range of 1000-1200 nm. Further, [1]ClO4-[3]ClO4 delivered an electrochemical OER (oxygen evolution reaction) process in alkaline medium on immobilizing them to a carbon cloth support, which divulged an amplified water oxidation feature for [2]ClO4 due to the presence of electron-donating methyl groups in the L2 backbone. The faster OER kinetics and high catalytic stability of [2]ClO4 could also be rationalized by its lowest Tafel slope (85 mV dec-1) and choronoamperometric experiment (stable up to 12 h), respectively, along with high Faradic efficiency (∼97%). A comparison of [2]ClO4 with the reported analogous ruthenium complexes furnished its excellent intrinsic water oxidation activity.

Synthesis and characterization of titanium-substituted nanocrystalline Co2-Y hexaferrite: magnetically retrievable photocatalyst for treatment of methyl orange contaminated wastewater.

Rapid industrial growth causes considerable environmental havoc, adversely affecting human and aqueous life. It becomes a significant concern to deal with adequate wastewater treatment strategies by converging on water scarcity. This research work explored the synthesis of titanium-substituted Y-type barium hexaferrite (Co2-Y), having a general formula of Ba2Co2Fe12-xTixO22 (x = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5), using a facile nitrate-based sol-gel auto-combustion route and its suitability was investigated as a heterogeneous catalyst within the photo-Fenton-based degradation of methyl orange (MO), one of the significant pollutants generated from textile industries. Developing a thermochemically stable and magnetically separable heterogeneous catalyst for photocatalytic decomposition of nonbiodegradable organic dye from wastewater was also emphasized. The as-prepared nanocrystalline Co2-Y powders were analyzed using XRD, FTIR, DLS, UV-visible spectroscopy, SEM, VSM, and XPS. Furthermore, the photocatalytic degradation performance of pristine and titanium substituted Ba2Co2Fe11.6Ti0.4O22 ferrite, having the lowest bandgap value among all samples, was quantified and compared in terms of apparent rate constant (karc) value and turnover frequency values. The enriched photocatalytic performance was correlated with the existence of multi-valance states of transition metal cations and the availability of oxygen vacancy, confirmed by the surface chemistry using the XPS analysis. The modified (enhanced thermal and chemical stability) hexaferrite catalyst was magnetically separable and reusable without significant losses to its catalytic performance. This promising catalyst may be considered as a replacement for soft ferrite materials to catalyze the degradation of several other nonbiodegradable organic pollutants from wastewater in large-scale industries.

Deciphering Ligand Controlled Structural Evolution of Prussian Blue Analogues and Their Electrochemical Activation during Alkaline Water Oxidation.

Herein, we have demonstrated the control over the structure of precatalysts to tune the properties of the active catalysts and their water oxidation activity. The reaction of K3 [Fe(CN)6 ] and Na2 [Fe(CN)5 (NO)] with Co(OH)2 @CC produced precatalysts PC-1 and PC-2, respectively, with distinct structural and electronic features. The replacement of the -CN group with strong π-acceptor -NO modulates the electronic and atomic structure of PC-2. As a result, a facile electrochemical transformation of PC-2 into active catalyst Fe-Co(OH)2 -Co(O)OH (AC-2) has been attained only in 15 CV cycles while 600 CV cycles are required for the electrochemical activation of PC-1 into AC-1. The X-ray absorption studies reveal the contraction of the Co-O and Fe-O bond in AC-2 because of the presence of a higher amount of Co3+ and Fe3+ than in AC-1. The high valent Co3+ and Fe3+ modulates the electronic properties of AC-2 and assists in the O-O bond formation, leading to the improved water oxidation activity.

Homoleptic Ni(II) dithiocarbamate complexes as pre-catalysts for the electrocatalytic oxygen evolution reaction.

Four new functionalized Ni(II) dithiocarbamate complexes of the formula [Ni(Lx)2] (1-4) (L1 = N-methylthiophene-N-3-pyridylmethyl dithiocarbamate, L2 = N-methylthiophene-N-4-pyridylmethyl dithiocarbamate, L3 = N-benzyl-N-3-pyridylmethyl dithiocarbamate, and L4 = N-benzyl-N-4-pyridylmethyl dithiocarbamate) have been synthesized and characterized by IR, UV-vis, and 1H and 13C{1H} NMR spectroscopic techniques. The solid-state structure of complex 1 has also been determined by single crystal X-ray crystallography. Single crystal X-ray analysis revealed a monomeric centrosymmetric structure for complex 1 in which two dithiocarbamate ligands are bonded to the Ni(II) metal ion in a S^S chelating mode resulting in a square planar geometry around the nickel center. These complexes are immobilized on activated carbon cloth (CC) and their electrocatalytic performances for the oxygen evolution reaction (OER) have been investigated in aqueous alkaline solution. All the complexes act as pre-catalysts for the OER and undergo electrochemical anodic activation to form Ni(O)OH active catalysts. Spectroscopic and electrochemical characterization revealed the existence of the interface of molecular complex/Ni(O)OH, which acts as the real catalyst for the OER. The active catalyst obtained from complex 2 showed the best OER activity achieving 10 mA cm-2 current density at an overpotential of 330 mV in 1.0 M aqueous KOH solution.