RESUMEN
Ultrasonic irradiation holds potential for the selective oxidation of non-volatile organic substrates in the aqueous phase by harnessing hydroxyl radicals as chemical initiators. Here, a mechanistic description of hydroxyl radical-initiated glyoxal oxidation is constructed by gleaning insights from photolysis and radiation chemistry to explain the yields and kinetic trends for oxidation products. The mechanistic description and kinetic measurements reported herein reveal that increasing the formation rate of hydroxyl radicals by changing the ultrasound frequency increases both the rates of glyoxal consumption and the selectivity towards C2 acid products over those from C-C cleavage. Glyoxal consumption also occurs more rapidly and with greater selectivity towards C2 acids under acidic conditions, which favor the protonation of carboxylate intermediates into their less reactive acidic forms. Leveraging such pH and frequency effects is crucial to mitigating product degradation by secondary reactions with hydroxyl radicals and oxidation products (specifically hydrogen peroxide and superoxide). These findings demonstrate the potential of ultrasound as a driver for the selective oxidation of aldehyde functions to carboxylic acids, offering a sustainable route for valorizing biomass-derived platform molecules.
RESUMEN
α,ß-Unsaturated aldehydes are important building blocks for the synthesis of a wide range of chemicals, including polymers. The synthesis of these molecules from cheap feedstocks such as alkenes remains a scientific challenge, mainly due to the low reactivity of alkenes. Here we report a selective and metal-free access to α,ß-unsaturated aldehydes from alkenes with formaldehyde. This reaction is catalyzed by dimethylamine and affords α,ß-unsaturated aldehydes in yields of up to 80 %. By combining Density Functional Theory (DFT) calculations and experiments, we elucidate the reaction mechanism which is based on a cascade of hydride transfer, hydrolysis and aldolization reactions. The reaction can be performed under very mild conditions (30-50 °C), in a theoretically 100 % carbon-economical fashion, with water as the only by-product. The reaction was successfully applied to non-activated linear 1-alkenes, thus opening an access to industrially relevant α,ß-unsaturated aldehydes from cheap and widely abundant chemicals at large scale.
RESUMEN
Furfural is an industrially relevant biobased chemical platform. Unlike classical furan, or C-alkylated furans, which have been previously described in the current literature, the =C5H bond of furfural is unreactive. As a result, on a large scale, C=C and C=O bond hydrogenation/hydrogenolysis is mainly performed, with furfuryl alcohol and methyl tetrahydrofuran being the two main downstream chemicals. Here, we show that the derivatization of the -CHO group of furfural restores the reactivity of its =C5H bond, thus permitting its double condensation on various alkyl aldehydes. Overcoming the recalcitrance of the =C5H bond of furfural has opened an access to a biobased monomer, whose potential have been investigated in the fabrication of renewably-sourced poly(silylether). By means of a combined theoretical-experimental study, a reactivity scale for furfural and its protected derivatives against carbonylated compounds has been established using an electrophilicity descriptor, a means to predict the molecular diversity and complexity this pathway may support, and also to de-risk any project related to this topic. Finally, by using performance criteria for industrial operations in the field of fuels and commodities, we discussed the industrial potential of this work in terms of cost, E-factor, reactor productivity and catalyst consumption.
RESUMEN
Here, we study a sequence Diels-Alder/aromatization reaction between biobased furanic derivatives and alkynes, paving the way to renewable phenols. Guided by DFT calculations, we revealed that, in the case of dimethylfuran, the methyl group can migrate during the aromatization step, making this substrate also eligible to access renewable phenols. This reaction has been then successfully transposed to furfural and furfuryl alcohol, allowing molecular diversity and complexity to be created on phenol ring starting from two cheap biobased furanic derivatives available on large scale.
RESUMEN
With the progressive defossilization of our industry, hydrogen (H2 ) has been identified as a central molecule to store renewable electricity. In this context, ammonia (NH3 ) is now rapidly emerging as a promising hydrogen carrier for the future. This game change indirectly impacts the field of fine chemistry where hydrogenation reactions are widely deployed. In particular, the possibility of performing hydrogenation reactions using ammonia directly instead of hydrogen has become highly desirable but it remains a very difficult scientific task, which we address in this communication. Here we show that the N-H bond of NH3 can be cleaved within cavitation bubbles, generated by ultrasonic irradiation at a high frequency, leading to the in situ formation of a diimide, which then induces the hydrogenation of alkenes. Advantageously, this work does not involve any transition metal and releases N2 as a sole co-product.
RESUMEN
The development and implementation of new amphiphiles based on natural resources rather than petrochemical precursors is an essential requirement due to their feedstock depletion and adverse environmental impacts. In addition, the use of bio-based surfactants can provide unique characteristics and improve the properties and versatility of the colloidal systems in which they are applied, such as emulsions. Here, the emulsification properties of a synthesized biocompatible mannose-based surfactant were investigated. Its behavior was evaluated in the presence of four different natural oils (castor, sunflower, olive and soybean) as well as two different aqueous phases (pure water and phosphate-buffered saline). The results highlighted its interest as surfactant in O/W nanoemulsions for all tested oil and aqueous phases, using a low-energy preparation protocol and relatively low surfactant concentrations. Furthermore, the mannose groups present on the polar head of the surfactant and adsorbed on the surface of the emulsion droplets were shown to retain their native biological properties. The specific mannose-concanavalin A binding was observed in vitro by the designed nanoemulsions, revealing the biorecognition properties of the surfactant and its potential applicability as a nanocarrier.
Asunto(s)
Surfactantes Pulmonares , Tensoactivos , Tensoactivos/química , Manosa , Tamaño de la Partícula , Emulsiones/química , Aceites/química , Agua/química , ExcipientesRESUMEN
Nanocelluloses can be used to stabilize oil-water surfaces, forming so-called Pickering emulsions. In this work, we compare the organization of native and mercerized cellulose nanocrystals (CNC-I and CNC-II) adsorbed on the surface of hexadecane droplets dispersed in water at different CNC concentrations. Both types of CNCs have an elongated particle morphology and form a layer strongly adsorbed at the interface. However, while the layer thickness formed with CNC-I is independent of the concentration at 7 nm, CNC-II forms a layer ranging from 9 to 14 nm thick with increasing concentration, as determined using small-angle neutron scattering with contrast-matched experiments. Molecular dynamics (MD) simulations showed a preferred interacting crystallographic plane for both crystalline allomorphs that exposes the CH groups (100 and 010) and is therefore considered hydrophobic. Furthermore, this study suggests that whatever the allomorph, the migration of CNCs to the oil-water interface is spontaneous and irreversible and is driven by both enthalpic and entropic processes.
Asunto(s)
Celulosa , Nanopartículas , Adsorción , Celulosa/química , Emulsiones/química , Nanopartículas/química , Agua/químicaRESUMEN
Sugar-based amphiphiles are a relevant natural alternative to synthetic ones due to their biodegradable properties. An understanding of their structure-assembly relationship is needed to allow the concrete synthesis of suitable derivatives. Here, four different mannose-derivative surfactants are characterized by pendant drop, dynamic light scattering, small-angle X-ray scattering, cryotransmission electron microscopy, and molecular dynamics techniques in aqueous media. Measurements denote how the polysaccharide average degree of polymerization (DP¯) and the addition of a hydroxyl group to the hydrophobic tail, and thus the presence of a second hydrophilic moiety, affect their self-assembly. A variation in the DP¯ of the amphiphile has no effect in the critical micelle concentration in contrast to a change in the hydrophobic molecular region. Moreover, high-DP¯ amphiphiles self-assemble into spherical micelles irrespective of the hydroxyl group presence. Low-DP¯ amphiphiles with only one hydrophilic moiety form cylindrical micelles, while the addition of a hydroxyl group to the tail leads to a spherical shape.
Asunto(s)
Micelas , Azúcares , Carbohidratos , Interacciones Hidrofóbicas e Hidrofílicas , Tensoactivos/químicaRESUMEN
Mechanistic details of cellulose depolymerization by non-thermal (atmospheric) plasma (NTAP) remains under-explored given the complexity of the medium. In this study, we have investigated the reaction mechanism of glycosidic-bond degradation triggered by reaction with hydroxyl radicals, considered as the principal reactive species in NTAP medium. In the first step of reaction sequence, H-abstraction reactions by HO⧠. radical on different CH sites of the pyranose ring were found to be non-selective and markedly exergonic giving rise to a set of cellobiosyl carboradicals likely to undergo further reactions. We then showed that cellobiosyl carboradicals are protected against direct hydrolysis, no activation of the (1-4)- ß -glycosidic bond being characterized. Interestingly, a simple homolytic bond cleavage allowed to obtain desired monomer. Among the 18 possible fragmentations, involving CC and CO bond breaking from cellobiosyl carboradicals, 14 transition states were successfully identified, and only three reaction pathways proved kinetically and thermodynamically feasible. Natural bond orbital (NBO) analysis was performed to shed light on electronic structures of different compounds.
Asunto(s)
Celulosa , Radical Hidroxilo , Celulosa/química , HidrólisisRESUMEN
The catalytic hydroarylation of nonactivated alkenes with aniline is a reaction of high interest, aiming at providing C-functionalized aniline derivatives that are important precursors for the fabrication of polyurethanes. However, this reaction remains a longstanding goal of catalysis, as it requires one to simultaneously address two important goals: (1) the very low reactivity of nonactivated alkenes and (2) control of the hydroarylation/hydroamination selectivity. As a result, the hydroarylation of aniline is mostly restricted to activated alkenes (i.e., featuring ring strain, conjugation, or activation with electron-donating or -withdrawing groups). Here we show that the combination of bismuth triflate and hexafluoroisopropanol (HFIP) leads to the formation of highly active catalytic species capable of promoting the hydroarylation of various nonactivated alkenes, such as 1-octene, 1-heptene, and 1-undecene, among others, with aniline with high selectivity (71-92%). Through a combined experimental and computational investigation, we propose a reaction pathway where HFIP stabilizes the rate-determining transition state through a H-bond interaction with the triflate anion, thus assisting the acid catalyst in the hydroarylation of nonactivated alkenes. From a practical point of view, this work opens a catalytic access to C-functionalized aniline derivatives from two cheap and abundant feedstocks in a 100% atom-economical fashion.
RESUMEN
Hydrazine is a chemical of utmost importance in our society, either for organic synthesis or energy use. The direct conversion of NH3 to hydrazine is highly appealing, but it remains a very difficult task because the degradation of hydrazine is thermodynamically more feasible than the cleavage of the N-H bond of NH3 . As a result, any catalyst capable of activating NH3 will thus unavoidably decompose N2 H4 . Here we show that cavitation bubbles, created by ultrasonic irradiation of aqueous NH3 at a high frequency, act as microreactors to activate and convert NH3 to NH species, without assistance of any catalyst, yielding hydrazine at the bubble-liquid interface. The compartmentation of in-situ-produced hydrazine in the bulk solution, which is maintained close to 30 °C, advantageously prevents its thermal degradation, a recurrent problem faced by previous technologies. This work also points towards a path to scavenge . OH radicals by adjusting the NH3 concentration.
RESUMEN
The synthesis of relevant renewable aromatics from bio-based furfural derivatives and cheap alkenes is carried out by using a Diels-Alder/aromatization sequence. The prediction and the control of the ortho/meta selectivity in the Diels-Alder step is an important issue to pave the way to a wide range of renewable aromatics, but it remains a challenging task. A combined experimental-theoretical approach reveals that, as a general trend, ortho and meta cycloadducts are the kinetic and thermodynamic products, respectively. The nature of substituents, both on the dienes and dienophiles, significantly impacts the feasibility of the reaction, through a modulation on the nucleo- and electrophilicity of the reagents, as well as the ortho/meta ratio. We show that the ortho/meta selectivity at the reaction equilibrium stems from a subtle interplay between charge interactions, favoring the ortho products, and steric interactions, favoring the meta isomers. This work also points towards a path to optimize the aromatization step.
RESUMEN
Alkyl amines represent an important class of chemicals with multiple applications in our daily life. Among the different routes to alkyl amines, the catalytic hydroamination of alkenes with amines is of high interest mainly because it occurs in a 100% atom-economical fashion. To circumvent thermodynamic limitations, activated alkenes or activated amines are essentially employed in such reactions. To date, the catalytic hydroamination of cheap and abundant non-activated (linear) alkenes with ammonia, the simplest amine, remains an unsolved reaction by catalysis. This tutorial review covers the advances reported so far in the intermolecular hydroamination of non-activated linear alkenes with simple alkyl amines, with special interest in ammonia. Focusing on thermodynamics, catalysis and emerging technologies, we aim at providing new perspectives to look at this challenging reaction from a different point of view. In particular, we highlight that the generation of amino radicals from NH3 using "physics activation" is a potential source of inspiration to (i) reduce energy barriers and (ii) reverse the regioselectivity to complete anti-Markovnikov addition.
RESUMEN
The production of amine intermediates from biomass is capturing increasing attention. Herein, a simple and efficient preparation of l furan-derived amines was developed [e.g., 1-(furan-2-yl)-4-methylpentan-2-amine] with high yield (up to 95 %) from (E)-1-(furan-2-yl)-5-methylhex-1-en-3-one. The catalyst used was Ru/C, and it was recyclable up to the fourth cycle. To further realize cost-efficiency, a one-reactor tandem concept was attempted. To this aim direct reaction from furfural was investigated. A high yield (74 %) towards 1-(furan-2-yl)-4-methylpentan-2-amine could be achieved starting directly from furfural in the presence of methyl isobutyl ketone, NH3 , H2 , and Ru/C catalyst.
RESUMEN
The depolymerization of cellulose to glucose is a challenging reaction and often constitutes a scientific obstacle in the synthesis of downstream bio-based products. Here, we show that cellulose can be selectively depolymerized to glucose by ultrasonic irradiation in water at a high frequency (525 kHz). The concept of this work is based on the generation of HË and ËOH radicals, formed by homolytic dissociation of water inside the cavitation bubbles, which induce the cleavage of the glycosidic bonds. The transfer of radicals on the cellulose particle surfaces prevents the side degradation of released glucose into the bulk solution, allowing maintaining the selectivity to glucose close to 100%. This work is distinguished from previous technologies in that (i) no catalyst is needed, (ii) no external source of heating is required, and (iii) the complete depolymerization of cellulose is achieved in a selective fashion. The addition of specific radical scavengers coupled to different gaseous atmospheres and ËOH radical dosimetry experiments suggested that HË radicals are more likely to be responsible for the depolymerisation of cellulose.
RESUMEN
We report here, and rationalize, a synergistic effect between a non-noble metal oxide catalyst (CuO) and high-frequency ultrasound (HFUS) on glucose oxidation. While CuO and HFUS are able to independently oxidize glucose to gluconic acid, the combination of CuO with HFUS led to a dramatic change of the reaction selectivity, with glucuronic acid being formed as the major product. By means of density functional theory (DFT) calculations, we show that, under ultrasonic irradiation of water at 550 kHz, the surface lattice oxygen of a CuO catalyst traps H· radicals stemming from the sonolysis of water, making the ring-opening of glucose energetically unfavorable and leaving a high coverage of ·OH radical on the CuO surface, which selectively oxidizes glucose to glucuronic acid. This work also points toward a path to optimize the size of the catalyst particle for an ultrasonic frequency that minimizes the damage to the catalyst, resulting in its successful reuse.
RESUMEN
The irradiation of concentrated feeds of carbohydrates in alcoholic solution by high-frequency ultrasound (550â kHz) induces the formation of alkylpolyglycosides (APGs). This work is distinct from previous reports in that it does not involve any (bio)catalyst or activating agent, it takes place at only 40 °C, thus avoiding degradation of carbohydrates, and it selectively yields APGs with a degree of polymerization in a window of 2-7, an important limitation of the popular Fischer glycosylation. This ultrasound-based technology proved successful with a range of different valuable carbohydrates and alkyl alcohols. The elucidation of the structure of all the produced glycosides strongly suggests that 1,6-anhydrosugars formed in situ are key intermediate species.
RESUMEN
We report the synthesis of biomass-derived functionalized aromatic chemicals from furfural, a building block nowadays available in large scale from low-cost biomass. The scientific strategy relies on a Diels-Alder/aromatization sequence. By controlling the rate of each step, it was possible to produce exclusively the meta aromatic isomer. In particular, through this route, we describe the synthesis of renewably sourced meta-xylylenediamine (MXD). Transposition of this work to other furfural-derived chemicals is also discussed and reveals that functionalized biomass-derived aromatics (benzaldehyde, benzylamine, etc.) can be potentially produced, according to this route.
Asunto(s)
Biomasa , Diaminas/química , Furaldehído/química , Xilenos/química , Catálisis , Reacción de Cicloadición , Diaminas/síntesis química , Isomerismo , Teoría CuánticaRESUMEN
Here, we investigated that the mechanocatalytic depolymerization of cellulose in the presence of Aquivion, a sulfonated perfluorinated ionomer. Under optimized conditions, yields of water soluble sugars of 90-97% were obtained using Aquivion PW98 and PW66, respectively, as a solid acid catalyst. The detailed characterization of the water soluble fraction revealed (i) the selective formation of oligosaccharides with a DP up to 11 and (ii) that depolymerization and reversion reactions concomitantly occurred during the mechanocatalytic process, although the first largely predominated. More importantly, we discussed on the critical role of water contained in Aquivion and cellulose on the efficiency of the mechanocatalytic process.
RESUMEN
An overview is provided on the recent advances in transglycosylation of cellulose and hemicellulose with either short-chain or long-chain alkyl alcohols. Catalytic processes are compared in terms of yield, selectivity and space-time yield, with a view to identifying the most promising pathways for future developments. In this context, the synthesis of alkylpolyglycosides directly from lignocellulosic biomass is discussed while keeping in mind the impact of the botanical origin on the transglycosylation reaction and the product distribution. A section dedicated to the physicochemical properties and ecological footprint of alkylpolyglycosides is also included.