RESUMEN
Colon specific delivery of therapeutics have gained much attention of pharmaceutical researchers in the recent past. Colonic specific targeting of drugs is used not only for facilitating absorption of protein or peptide drugs, but also localization of therapeutic agents in colon to treat several colonic disorders. Among various biopolymers, guar gum (GG) exhibits pH dependent swelling, which allows colon specific release of drug. GG also shows microbial degradation in the colonic environment which makes it a suitable excipient for developing colon specific drug delivery systems. The uncontrolled swelling and hydration of GG can be controlled by structural modification or by grafting with another polymeric moiety. Several graft copolymerized guar gum derivatives are investigated for colon targeting of drugs. The efficacy of various guar gum derivatives are evaluated for colon specific delivery of drugs. The reviewed literature evidenced the potentiality of guar gum in localizing drugs in the colonic environment. This review focuses on the synthesis of several guar gum derivatives and their application in developing various colon specific drug delivery systems including matrix tablets, coated formulations, nano or microparticulate delivery systems and hydrogels.
Asunto(s)
Colon , Sistemas de Liberación de Medicamentos , Colon/metabolismo , Gomas de Plantas/química , Galactanos/química , Mananos/química , Portadores de Fármacos/metabolismoRESUMEN
Alongside oral delivery of therapeutics, transdermal delivery systems have gained increased patient acceptability over past few decades. With increasing popularity, novel techniques were employed for transdermal drug targeting which involves microneedle patches, transdermal films and hydrogel based formulations. Hydrogel forming ability along with other rheological behaviour makes natural polysaccharides an attractive option for transdermal use. Being a marine originated anionic polysaccharide, alginates are widely used in pharmaceutical, cosmetics and food industries. Alginate possesses excellent biodegradability, biocompatibility and mucoadhesive properties. Owing to many favourable properties required for transdermal drug delivery systems (TDDS), the application of alginates are increasing in recent times. This review summarizes the source and properties of alginate along with several transdermal delivery techniques including the application of alginate for respective transdermal systems.
Asunto(s)
Alginatos , Sistemas de Liberación de Medicamentos , Humanos , Administración Cutánea , Sistemas de Liberación de Medicamentos/métodos , Hidrogeles , Composición de MedicamentosRESUMEN
Over the past few decades, chitosan (CS) has gained the attention of researchers investigating newer biomaterial-based carriers for drugs in pharmaceutical and biomedical research. Combined with its nontoxic behavior, biodegradability, and biocompatibility, chitosan has found widespread applications in the fields of drug delivery, tissue engineering, and cosmetics. As a novel drug carrier, chitosan is regarded as one of the promising biomaterials in the pharmaceutical industry. The extensive use of this cationic biopolysaccharide in the delivery of therapeutic agents has brought a few limitations of chitosan into the limelight. Various chemical modifications of chitosan can minimize these limitations and improve the efficacy of chitosan as a drug carrier. The effectiveness of several chemically modified chitosan derivatives, including trimethyl chitosan, thiolated chitosan, PEGylated chitosan, and other chitosan derivatives, has been investigated by many researchers for the controlled and target specific delivery of therapeutics. The chemically modified chitosan derivatives exhibited greater importance in the current scenario on drug delivery due to their solubility in wide range of media along with their interaction with pharmaceutically active ingredients. Chitosan derivatives have also attracted attention in several biomedical fields, including wound healing, hyperthermia therapy, tissue engineering, and bioadhesives. The present review narrates the sources and common physicochemical properties of chitosan, including several important synthetic modifications to obtain chemically modified chitosans and their applications in target-specific drug delivery, along with several biomedical applications.
Asunto(s)
Quitosano , Sistemas de Liberación de Medicamentos , Materiales Biocompatibles , Portadores de Fármacos , Ingeniería de TejidosRESUMEN
Marine sources have attracted much interest as an emerging source of biomaterials in drug delivery applications. Amongst all other marine biopolymers, polysaccharides have been the most investigated class of biomaterials. The low cytotoxic behavior, combined with the newly explored health benefits of marine polysaccharides, has made it one of the prime research areas in the pharmaceutical and biomedical fields. This review focused on all available marine polysaccharides, including their classification based on biological sources. The applications of several marine polysaccharides in recent years for tissue-specific novel drug delivery, including gastrointestinal, brain tissue, transdermal, ocular, liver, and lung, have also been discussed here. The abundant availability in nature, cost-effective extraction, and purification process, along with a favorable biodegradable profile, will encourage researchers to continue investigating marine polysaccharides to explore newer applications targeting the specific delivery of therapeutics.
Asunto(s)
Sistemas de Liberación de Medicamentos , Polisacáridos , Materiales Biocompatibles , Biopolímeros , HumanosRESUMEN
In this study, aceclofenac-loaded IPN nanocomposites were developed based on natural polysaccharides namely chitosan (CS) and locust bean gum (LBG) using glutaraldehyde as cross-linker. Infrared spectroscopy analysis confirmed the formation of composite materials and ensured the chemical compatibility between drug and polymers. The effect of component polymers on the drug entrapment efficiency (DEE) and particle size of the composites was examined. Increasing LBG content actually decreased the DEE from 72% to 40% and produced larger particles of 372-485nm dimensions. However, an opposite trend was noted as the concentration of CS was increased. Out of these composites, the maximum drug entrapment efficiency of 78.92% and smallest composites of 318nm-size was obtained at LBG: CS mass ratio of 1:5. However, CS: LBG (1:5) provided the slowest drug release profiles in phosphate buffer solution (pH 6.8) up to 8h. The drug release data corroborated well with the swelling properties of the nanocomposites. The composite systems efficiently suppressed the burst release of drug in acidic medium (pH 1.2). The drug delivery from the nanocomposites occurred via anomalous transport mechanism in vitro. Overall, this novel chitosan- and LBG-based nanocomposites system could minimize the gastrointestinal side effects of the drug by providing medication in a slow sustained fashion.
Asunto(s)
Quitosano/química , Diclofenaco/análogos & derivados , Portadores de Fármacos/química , Galactanos/química , Mananos/química , Nanocompuestos/química , Gomas de Plantas/química , Preparaciones de Acción Retardada , Diclofenaco/química , Liberación de FármacosRESUMEN
In this study, gelatin and carboxymethyl tamarind gum (CTG) were chemically cross-linked to control the delivery of aceclofenac from their interpenetrating network (IPNs). Infrared spectra, thermal and X-ray data supported that drug and polymer was compatible in the composite hydrogels. Irregularly shaped IPN microstructures were seen under field emission scanning electron microscope (FE-SEM). IPN system was capable of entrapping about 96% of the drug fed. CTG in IPN structures suppressed the drug release rate in HCl solution (pH1.2); however extended the same in phosphate buffer solution (pH6.8). The drug release was controlled by polymer chain relaxation/swelling and simple diffusion in vitro. The anti-inflammatory activity of drug-loaded biocomposites lasted over 7h in albino rats, thus suggesting their potential as an anti-inflammatory therapeutics.
Asunto(s)
Antiinflamatorios/química , Portadores de Fármacos/química , Gelatina/química , Polisacáridos/química , Tamarindus/metabolismo , Animales , Antiinflamatorios/administración & dosificación , Antiinflamatorios/metabolismo , Rastreo Diferencial de Calorimetría , Diclofenaco/administración & dosificación , Diclofenaco/análogos & derivados , Diclofenaco/química , Diclofenaco/metabolismo , Modelos Animales de Enfermedad , Liberación de Fármacos , Edema/inducido químicamente , Edema/tratamiento farmacológico , Femenino , Hidrogeles/química , Masculino , Microscopía Electrónica de Rastreo , Ratas , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
In this work, an interpenetrating hydrogel network was constructed using varying combination of O-carboxymethyl Tamarind gum (CTG) and alginate by Ca+2 ion induced gelation method. The hydrogels were characterized by FTIR spectroscopy, Field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and differential scanning calorimetry (DSC) analyses. The hydrogels were spherical in shape with rough surface textures. Depending on the alginate: CTG mass ratio, the hydrogel particles entrapped a maximum of â¼70% acyclovir. The drug release from interpenetrating hydrogels was 18-23% in HCl solution (pH1.2) in 2h. The drug release became faster in phosphate buffer solution (pH6.8) as the proportion of CTG was increased from 25% to 50%. However, the drug release was still slower than that observed for hydrogel particles of sodium alginate alone. Overall, the drug release tendency of the particles was higher in phosphate buffer solution than that in HCl solution. The non-Fickian drug release behavior was assumed after fitting the drug release data into Korsmeyer-Peppas model. The drug release was found to control by diffusion and swelling kinetics of the hydrogels. Thus, CTG gum could effectively retard drug release when used in combination with sodium alginate at an optimized mass ratio.
Asunto(s)
Aciclovir/química , Alginatos/química , Antivirales/química , Portadores de Fármacos , Hidrogeles/química , Gomas de Plantas/química , Preparaciones de Acción Retardada , Difusión , Composición de Medicamentos , Liberación de Fármacos , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Concentración de Iones de Hidrógeno , Cinética , Gomas de Plantas/aislamiento & purificación , Propiedades de Superficie , Tamarindus/químicaRESUMEN
BACKGROUND: Now a day's natural polymer based nanoparticulate system have been widely studied as particulate vehicles in the bio-medical and pharmaceutical area. Alginate, a natural biopolymer show good biodegradability, biocompatibility and non toxic, has received attention to utilise as a carrier for preparation of polymeric nanoparticles. Chemically and physically alginate can modified easily and obtained various structure having various properties, and versatile applications. Various properties and structure such as biodegradability, gelling property, mechanical strength and cell affinity can be obtained through combination of alginate with other biopolymers, immobilization of specific molecules such as sugar molecules and peptide through chemical or physical cross-linking. CONCLUSION: In this article, we report different method of preparation of alginate nanoparticles, and also focus on recent advances of nanoparticles made of alginate and its modified form in the field of drug delivery applications.
Asunto(s)
Alginatos/química , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Animales , Conformación de Carbohidratos , Portadores de Fármacos/química , Ácido Glucurónico/química , Ácidos Hexurónicos/química , HumanosRESUMEN
This investigation aims to isolate an Actinomycetes strain producing a biosurfactant from the unexplored region of industrial and coal mine areas. Actinomycetes are selected for this study as their novel chemistry was not exhausted and they have tremendous potential to produce bioactive secondary metabolites. The biosurfactant was characterized and further needed to be utilized for pharmaceutical dosage form. Isolation, purification, screening, and characterization of the Actinomycetes A17 were done followed by its fermentation in optimized conditions. The cell-free supernatant was used for the extraction of the biosurfactant and precipitated by cold acetone. The dried precipitate was purified by TLC and the emulsification index, surface tension and CMC were determined. The isolated strain with preferred results was identified as Actinomycetes nocardiopsis A17 with high foam-forming properties. It gives lipase, amylase, gelatinase, and protease activity. The emulsification index was found to be 93±0.8 with surface tension 66.67 dyne/cm at the lowest concentration and cmc 0.6 µg/ml. These biosurfactants were characterized by Fourier transform infra red (FT-IR) spectroscopy and liquid chromatography-mass spectrometry (LC-MS). Therefore, it can be concluded that the biosurfactant produced by Actinomycetes nocardiopsis sp. strain A17 was found to have satisfactory results with high surface activity and emulsion-forming ability.
Asunto(s)
Actinobacteria/metabolismo , ARN Ribosómico 16S/genética , Tensoactivos/metabolismo , Actinobacteria/química , Actinobacteria/clasificación , Actinobacteria/genética , Amilasas/biosíntesis , Amilasas/aislamiento & purificación , Emulsiones , Fermentación , Gelatinasas/biosíntesis , Gelatinasas/aislamiento & purificación , Concentración de Iones de Hidrógeno , Lipasa/biosíntesis , Lipasa/aislamiento & purificación , Micelas , Péptido Hidrolasas/biosíntesis , Péptido Hidrolasas/aislamiento & purificación , Filogenia , Tensión Superficial , Tensoactivos/aislamiento & purificación , TemperaturaRESUMEN
This study was undertaken to evaluate the effect of Boswellia gum resin on the properties of glutaraldehyde (GA) crosslinked chitosan polymer composites and their potential as oral delivery vehicles for a non-steroidal anti-inflammatory drug, aceclofenac. The incorporation of resinous material caused a significant improvement in drug entrapment efficiency (â¼40%) of the polymer composites. Fourier transform infrared (FTIR) spectroscopic analysis confirmed the formation of chitosan-gum resin composites and did not show any evidence of drug-polymer chemical interaction. Field emission scanning electron microscopy (FE-SEM) suggested the formation of particulate polymer composites up to chitosan:gum resin mass ratio of 1:3. Only 8-17% drug was released into HCl solution (pH 1.2) in 2h. The drug release rate of polymer composites was faster in phosphate buffer solution (pH 6.8). The composites released â¼60-68% drug load in 7h. In same duration, the drug release rate suddenly boosted up to 92% as the concentration of gum resin in the composites was raised to 80%. The drug release mechanism deviated from non-Fickian to case-II type with increasing resin concentration in the composites. Hence, GA-treated Boswellia resin-chitosan composites could be considered as alternative vehicles for oral delivery of aceclofenac.
Asunto(s)
Boswellia/química , Quitosano/química , Diclofenaco/análogos & derivados , Portadores de Fármacos/química , Gomas de Plantas/química , Resinas de Plantas/química , Preparaciones de Acción Retardada , Diclofenaco/químicaRESUMEN
In the present work, testosterone-loaded alginate nanocapsules were prepared by in situ nanoemulsification-polymer cross-linking method. Drug loading, particle size (diameter), polydispersity index and zeta potential of these alginate nanocapsules were measured 30.22 ± 1.90%, 34.53 ± 1.72 nm, 0.22 ± 0.04 and -5 mV, respectively. The pharmacokinetic evaluation of these nanocapsules was also performed in female Sprague Dawley rats. Cmax, Tmax and AUC0-24 vales were estimated 38.63ng/ml, 2h and 317.93 ng ml(-1) h(-1), respectively. The pharmacokinetic result of testosterone-loaded alginate nanocapsules indicates better bioavailability in comparison with pure testosterone and commercial testosterone injection.
Asunto(s)
Nanocápsulas/química , Testosterona/farmacocinética , Alginatos/química , Animales , Femenino , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Ratas , Ratas Sprague-Dawley , Testosterona/sangre , Factores de TiempoRESUMEN
The alginate microspheres represent a useful tool for sustained oral delivery of drugs but exhibit several problems associated with the stability and rapid release of drugs at higher pH values. To overcome these drawbacks, alginate-locust bean gum (LBG) interpenetrating microspheres were prepared by calcium ion (Ca(+2)) induced ionotropic gelation technique for prolonged release of aceclofenac. The drug entrapment efficiency of these microspheres was found to be 59-93%. The microspheres lied in the size range of 406-684µm. Scanning electron microscopy revealed spherical shape of the microspheres. No drug-polymer interaction was evident after infrared spectroscopy analysis. The microspheres provided sustained release of aceclofenac in phosphate buffer solution (pH 6.8) over a period of 8h. The drug release data were fitted into the Korsmeyer-Peppas model and the drug release was found to follow anomalous (non-Fickian) diffusion mechanism. Pharmacodynamic study of the microspheres showed a prolonged anti-inflammatory activity in carrageenan-induced rat paw model following oral administration.
Asunto(s)
Alginatos/química , Diclofenaco/análogos & derivados , Sistemas de Liberación de Medicamentos , Galactanos/química , Mananos/química , Metales/química , Microesferas , Gomas de Plantas/química , Polímeros/química , Administración Oral , Animales , Antiinflamatorios/farmacología , Diclofenaco/administración & dosificación , Diclofenaco/farmacología , Diclofenaco/uso terapéutico , Edema/tratamiento farmacológico , Edema/patología , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Iones , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Ratas Sprague-Dawley , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
A novel hydrogel system was successfully developed based on core-shell approach for the delivery of ranitidine HCl and aceclofenac. Aceclofenac-loaded alginate microspheres coated with eudragit L-100 was used as core material and that of freeze-thaw cross-linked chitosan-PVA gels containing ranitidine HCl served as the shell-forming material. The alginate microspheres coated with eudragit L-100 showed drug encapsulation efficiency of 56.06±1.12 to 68.03±2.16% and had average particle sizes of 551.29±25.92 to 677.18±27.05 µm. The viscosity of chitosan-PVA gels ranged between 505.74±1.04 and 582.41±2.09 cps. The formulations were characterized by FTIR, SEM and polarized microscopy analyses. The release of ranitidine HCl was comparatively higher in acidic medium (pH 1.2) than in alkaline medium (pH 7.4). The release of aceclofenac became slower in alkaline medium (pH 7.4) and continued up to 3.5 h. Super case-II transport mechanism was assumed for the release of ranitidine HCl in both media; whereas non-Fickian (anomalous) diffusion mechanism predominated in the release of aceclofenc. Thus, hydrogel-based core-shell formulations were found suitable for simultaneous delivery of aceclofenac and ranitidine HCl which could minimize the chances of excessive gastric acid secretion through suitable ranitidine HCl release in gastric region.
Asunto(s)
Alginatos/química , Diclofenaco/análogos & derivados , Sistemas de Liberación de Medicamentos , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Ranitidina/administración & dosificación , Química Farmacéutica , Diclofenaco/administración & dosificación , Liberación de Fármacos , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Microesferas , Tamaño de la Partícula , Ácidos Polimetacrílicos/química , Espectroscopía Infrarroja por Transformada de Fourier , ViscosidadRESUMEN
A Nocardiopsis sp. stain B2 with an ability to produce stable α-amylase was isolated from marine sediments. The characterization of microorganism was done by biochemical tests and 16S rDNA sequencing. The α-amylase was purified by gel filtration chromatography by using sephadex G-75. The molecular mass of the amylase was found to be 45 kDa by SDS-PAGE and gel filtration chromatography. The isolated α-amylase was immobilized by ionotropic gelation technique using gellan gum (GG). These microspheres were spherical with average particle size of 375.62±21.76 to 492.54±32.18 µm. The entrapment efficiency of these α-amylase loaded GG microspheres was found 74.76±1.32 to 87.64±1.52%. Characterization of α-amylase-gellan gum microspheres was confirmed using FTIR and SEM analysis. The in vitro amylase release kinetic have been studied by various mathematical models that follow the Korsmeyer-Peppas model (R2=0.9804-0.9831) with anomalous (non-Fickian) diffusion release mechanism.
Asunto(s)
Actinobacteria/enzimología , Enzimas Inmovilizadas , Microesferas , Polisacáridos Bacterianos/química , alfa-Amilasas/química , Actinobacteria/crecimiento & desarrollo , Activación Enzimática/efectos de los fármacos , Concentración de Iones de Hidrógeno , Cinética , Tamaño de la Partícula , Cloruro de Sodio/farmacología , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , alfa-Amilasas/aislamiento & purificaciónRESUMEN
In this present study the possibility to develop Eudragit RLPO(®) based nanoparticles of acyclovir was investigated in order to increase its efficacy because acyclovir has oral bioavailability of only 10-20% thus showing erratic absorption and bioavailability behaviour. The nanoparticles were prepared by nanoprecipitation technique. Pluronic F68 was used as stabilizer. The nanoparticles were characterized by particle size, entrapment efficiency, DSC, SEM, FTIR and in-vitro drug release. It was found that as drug:polymer (Acyclovir:Eudragit RLPO(®)) ratio increased from 1:1.5 to 1:2, particle size was increased significantly and drug entrapment also increased but thereafter, further increase in drug: polymer ratio showed reduced or insignificant change in the drug entrapment efficiency. DSC results showed that in the prepared nanoaprticles, the drug was present in the amorphous phase and may have been homogeneously dispersed in the polymer matrix. In vitro drug release study of formulations showed release in 24h in the range 71.62±1.72 to 93.25±1.02%. The release was found to follow Higuchi model with non-Fickian diffusion mechanism for all batches. These preliminary results indicate that acyclovir loaded Eudragit RLPO(®) nanoparticles could be effective in sustaining drug release for a prolonged period.
Asunto(s)
Aciclovir/administración & dosificación , Preparaciones de Acción Retardada/administración & dosificación , Sistemas de Liberación de Medicamentos , Nanopartículas/administración & dosificación , Aciclovir/química , Disponibilidad Biológica , Difusión , Portadores de Fármacos/administración & dosificación , Portadores de Fármacos/química , Humanos , Nanopartículas/química , Tamaño de la Partícula , Ácidos Polimetacrílicos/administración & dosificación , Ácidos Polimetacrílicos/químicaRESUMEN
This communication describes the formulation and in vitro evaluation of IPN matrix tablets of aceclofenac. IPN microparticles using chitosan and tamarind seed polysaccharide blend was prepared using glutaraldehyde as cross-linker. The drug entrapment efficiency and average particle size of these microparticles was found to be 91.97±1.30% and 498.12±38.67 µm, respectively. These IPN microparticles were characterized by scanning electron microscopy (SEM) and powder X-ray diffraction (P-XRD) study. These microparticles were compressed with tablet excipients through direct compression technique. These matrix tablets showed sustained aceclofenac release over 8 h. These matrix tablets might be helpful to minimize dosing frequency and reduction of various side effects during prolong period of treatment.
Asunto(s)
Quitosano/química , Diclofenaco/análogos & derivados , Portadores de Fármacos/química , Semillas/química , Tamarindus/química , Preparaciones de Acción Retardada , Diclofenaco/química , ComprimidosRESUMEN
In the present work, various aceclofenac-loaded chitosan-egg albumin nanoparticles were prepared through heat coagulation method. These aceclofenac-loaded nanoparticles were characterized by FE-SEM, FTIR, DSC and P-XRD analyses. The in vitro drug release from nanoparticles showed sustained drug release over 8h. Aceclofenac-loaded nanoparticles (prepared using 200mg chitosan, 500 mg egg albumin and 2% (w/v) NaTPP) showed highest drug entrapment (96.32±1.52%), 352.90 nm average particle diameter and -22.10 mV zeta potential, which was used for further preparation of Carbopol 940 gel for transdermal application. The prepared gel exhibited sustained ex vivo permeation of aceclofenac over 8h through excised mouse skin. The in vivo anti-inflammatory activity in carrageenean-induced rats demonstrated comparative higher inhibition of swelling of rat paw edema by the prepared gel compared with that of the marketed aceclofenac gel over 4 h.
Asunto(s)
Resinas Acrílicas/química , Quitosano/química , Diclofenaco/análogos & derivados , Sistemas de Liberación de Medicamentos , Geles/química , Nanopartículas/química , Ovalbúmina/química , Administración Cutánea , Animales , Rastreo Diferencial de Calorimetría , Diclofenaco/administración & dosificación , Diclofenaco/farmacología , Técnicas In Vitro , Ratones , Nanopartículas/ultraestructura , Tamaño de la Partícula , Permeabilidad/efectos de los fármacos , Ratas , Espectroscopía Infrarroja por Transformada de Fourier , Electricidad Estática , Viscosidad/efectos de los fármacos , Difracción de Rayos XRESUMEN
The possibility of inter-polymeric complexation of cationic chitosan and anionic egg albumin stabilized with PEG 400 to develop novel nanoparticles for oral delivery of alprazolam by heat coagulation method at pH 5.4 and 80 °C. Nine formulations were prepared by changing the concentration of chitosan, PEG 400 and heating time. The alprazolam entrapment efficiency of these nanoparticles was in the range of 68.12±1.27 to 99.37±4.86%. These nanoparticles were characterized by FTIR, DSC, P-XRD and FE-SEM analysis. Average particle diameter, poly-dispersity index and zeta potential of these nanoparticles were found 259.60 nm, 0.501, and -9.00 mV, respectively. The in vitro drug release from these alprazolam-loaded nanoparticles showed sustained drug release over a period of 24h. In conclusion, these newly developed chitosan-egg albumin-PEG nanoparticles were found to be a promising vehicle for sustained release delivery of lipophilic drugs.
Asunto(s)
Albúminas/química , Quitosano/química , Portadores de Fármacos/química , Nanopartículas/química , Polietilenglicoles/química , Administración Oral , Alprazolam/administración & dosificación , Alprazolam/química , Preparaciones de Acción Retardada , Calor , Tamaño de la PartículaRESUMEN
Aceclofenac-loaded alginate/gellan gum microspheres for prolonged aceclofenac release were prepared through maleic anhydride-induced unsaturated esterification. The drug entrapment efficiency of these microspheres was found 39.30 ± 1.28% to 98.46 ± 0.40% and their average particle sizes were 270-490 µm. These microspheres were characterized by FTIR, DSC, P-XRD and SEM analysis. The in vitro dissolution indicated prolonged sustained release of aceclofenac over 6h, which also followed the Korsmeyer-Peppas model (R(2)=0.9571-0.9952). The microspheres prepared through 3% (w/v) maleic anhydride-induced esterification exhibited comparatively slower drug-release. Most of the microspheres were followed Fickian diffusion mechanism except the microspheres containing higher gellan gum content, which followed anomalous (non-Fickian) diffusion. The in vivo results showed sustained systemic absorption of aceclofenac in rabbits and excellent anti-inflammatory activity in carrageenan-induced rats after oral administration over prolonged period.
Asunto(s)
Alginatos , Antiinflamatorios no Esteroideos , Materiales Biocompatibles , Diclofenaco/análogos & derivados , Microesferas , Polisacáridos Bacterianos , Administración Oral , Alginatos/química , Alginatos/farmacocinética , Alginatos/farmacología , Animales , Antiinflamatorios no Esteroideos/química , Antiinflamatorios no Esteroideos/farmacocinética , Antiinflamatorios no Esteroideos/farmacología , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacocinética , Materiales Biocompatibles/farmacología , Carragenina/toxicidad , Preparaciones de Acción Retardada/química , Preparaciones de Acción Retardada/farmacocinética , Preparaciones de Acción Retardada/farmacología , Diclofenaco/química , Diclofenaco/farmacocinética , Diclofenaco/farmacología , Modelos Animales de Enfermedad , Ácido Glucurónico/química , Ácido Glucurónico/farmacocinética , Ácido Glucurónico/farmacología , Ácidos Hexurónicos/química , Ácidos Hexurónicos/farmacocinética , Ácidos Hexurónicos/farmacología , Inflamación/inducido químicamente , Inflamación/tratamiento farmacológico , Masculino , Polisacáridos Bacterianos/química , Polisacáridos Bacterianos/farmacocinética , Polisacáridos Bacterianos/farmacología , Conejos , Ratas , Ratas Sprague-DawleyRESUMEN
The present work deals with the preparation, characterization and evaluation of glutaraldehyde cross-linked chitosan-tamarind seed polysaccharide (TSP) interpenetrating polymeric network (IPN) microparticles for prolonged aceclofenac release. The drug entrapment efficiency of these microparticles was found 85.84±1.75 to 91.97±1.30% and their average particle sizes were ranged from 490.55±23.24 to 621.60±53.57 µm. These chitosan-TSP IPN microparticles were characterized by FTIR, DSC, and SEM analyses. The in vitro drug release from these aceclofenac-loaded chitosan-TSP IPN microparticles showed sustained release of aceclofenac over 8h and followed the Korsmeyer-Peppas model (R(2)=0.9809-0.9828) with anomalous (non-Fickian) diffusion drug release mechanism. The in vivo studies exhibited sustained anti-inflammatory activity in carrageenan-induced rats over prolonged period after oral administration of these newly developed aceclofenac-loaded IPN microparticles.