Mechanical properties, sustained release, and oxygen scavenging properties of nanocomposite films loaded with bimetallic nanoparticles (Fe2O3/TiO2) in extra virgin olive oil.

The aim of this study was the synthesis of bimetallic nanoparticles based on Fe2O3/TiO2 and its use in the poly(lactic acid) (PLA) films as an oxygen scavenger in extra virgin olive oil (EVOO) packaging. Bimetallic nanocomposites were prepared by two different precipitation methods (precipitation with ammonia and sodium hydroxide). The characteristics of bimetallic nanoparticles precipitated with sodium hydroxide (Na-Ti0.01Fe0.048O0.08) and bimetallic nanoparticles precipitated with ammonia (NH-Ti0.01Fe0.022O0.09) were compared. Relative amounts of elements in bimetallic nanocomposites and their morphological characteristics were determined using field emission scanning electron microscopy coupled with energy-dispersive X-ray spectrometer. Porosity volume and surface area of bimetallic nanoparticles were calculated using adsorption-desorption isotherms and the Brunauer-Emmett-Teller method. The formation/characterization of bimetallic nanoparticles and their location in the matrix of PLA-based nanocomposite film was studied using X-ray diffraction and Fourier transform infrared. In nanocomposite films based on PLA, bimetallic nanoparticles lead to better oxidative stability (peroxide value, p-anisidine index, K232, and K270) of the EVOO and oxygen scavenging during storage compared to free nanoparticles. Mechanical properties of nanocomposite films were improved due to bimetallic nanoparticles, which were better for Na-Ti0.01Fe0.048O0.08. In vitro release modeling of the bimetallic nanoparticles in EVOO proved that Fickian diffusion is the dominant mechanism, and the Peleg model was the best description of the release behavior of nanoparticles.

A microbial inhibition assay in microplates using Bacillus licheniformis for detection of enrofloxacin and sulfamethazine in chicken spiked kidney, liver and muscle tissues.

BACKGROUND: The presence of antimicrobial drugs residues in animal products at levels higher than the maximum residue level (MRL) may have adverse effects on consumer health such as allergic reactions and resistance development. Therefore, it is necessary to monitor animal products for the presence of antimicrobial residues. OBJECTIVES: The aim of this study was to evaluate the detection limit of microbial inhibition assay (MIA) in microplate by using of Bacillus licheniformis as indicator microorganism for two antibiotics, enrofloxacin (ENR) and sulfamethazine (SMT), in broiler chicken's kidney, liver and muscle tissue samples. METHODS: Spiked tissues samples for the two antibiotics were analysed separately by this method. The results of the assay were evaluated by the determination of the absorbance after mean 3.47 h of incubation at 45°C. RESULTS: Results showed that the detection limits of MIA for ENR and SMT in kidney (124.03 and 23.21 µg/kg, respectively) and liver (90.02 and 62.03 µg/kg, respectively) as well as SMT in muscle (46.95 µg/kg) were lower than EU (European Union) - MRL, whereas the detection limit for ENR in muscle was slightly higher than MRL (136.3 µg/kg compared to 100 µg/kg MRL). Furthermore, the MIA in the current study was found to be more sensitive to SMT than ENR (92% and 88% sensitivity rate, respectively). No false-positive was observed in the assay. CONCLUSIONS: Based on the results, the MIA investigated in this study had the potential to detect ENR and SMT residues in broiler chicken kidney, liver and muscle tissues at levels below or close to EU - MRL but offered lower capability for the detection of ENR compared with SMT in kidney and muscle tissue samples.

Physicochemical and control releasing properties of date pit (Phoenix dactylifera L.) phenolic compounds microencapsulated through fluidized-bed method.

This study aimed to investigate the effect of different ethanol/water solvents on phenolic compound extraction and microencapsulated extract of date pit powder. The highest and the lowest amounts of total phenolic compounds were 742.37 and 236.07 mg GAE/g dm, respectively, observed in water-ethanol composite solvent (25% W: 75% E) and water solvent (100% W). In this regard, the highest and lowest values of IC50 were 6.83 and 0.90 µg/ml, measured in water solvent (100% W) and water-ethanol solvent (25% W: 75% E), respectively. In the second phase, using maltodextrin (10%, 20%, and 30% W/V) as the first layer, date pit extract was microencapsulated. Alhagi maurorum gum (10%, 20%, and 30% W/V) as the second layer and medium-chain triglycerides (MCT oil) (15% W/W) as the third layer were used by a fluidized-bed drying technique. By increasing temperature, the microencapsulated extract powder solubility was increased as well. In contrast, the moisture content, bulk density, tapped density, and compressibility index decreased. By increasing temperature, the maltodextrin and A. maurorum gum concentration, the coating efficiency, and the loading capacity of the samples increased initially and decreased eventually. Moisture content, powder solubility, bulk density, and compressibility index increased, with increasing maltodextrin concentration, however, tapped density decreased. The optimal physicochemical properties of the phenolic compounds' microcapsules were determined at 45°C and at a concentration of 20% of each of the maltodextrin and A. maurorum gum. According to scanning electron images, the powder particles were spherical and had a relatively smooth surface. Notably, the release rate of phenolic compounds reached its maximum (64%) after 24 h.

Novel pulsed infrared radiation: Effect on microbial, chemical and sensory properties of saffron (Crocus sativus L.).

AIM: In this study, the effect of pulsed infrared (PIR) irradiation on saffron microbial, chemical and sensory properties were evaluated. METHODS AND RESULTS: The PIR power (250, 350 and 450 W), the distance of sample with irradiation source (10, 20 and 30 cm), irradiation time (0-20 min) and PIR pulse (1, 2 and 3 pulse/s) were investigated. Decontamination of total bacteria and total mould and yeast flora and microbial inactivation kinetics were determined. Saffron quality by FTIR and HPLC and sensory attributes were also measured. The highest reduction of the total bacterial count (2.203 log10 CFU per g) and total mould and yeast counts (2.194 log10 CFU per g) were obtained in Sargol Negin saffron at 350 W PIR power, 10 cm distance, 1.5 min treatment time and 3 pulse/s. The Double Weibull model is the best-fit model for the prediction of the microbial population. CONCLUSION: Until now, there have been no reports of application for PIR in food processing and decontamination. According to the results, it can be concluded that PIR can be used as a safe method of saffron processing. SIGNIFICANCE AND IMPACT OF THE STUDY: Utilization of a proper decontamination method for spices especially saffron as the most expensive agricultural product is challengeable. It is recommended to use the PIR method for food processing because due to the reduction of microbial population, it can maintain foodstuff quality at an acceptable level.

Optimization of biodegradable paper cup packaging coated with whey protein isolate and rice bran wax as potential popcorn package.

Biodegradable paper cups coated with rice bran wax and whey protein isolate were designed to package popcorn. Coatings with different concentrations of whey protein isolate (5.5, 7.75, and 10% w/v) and rice bran wax (0.2, 0.4, and 0.6% w/v) were applied on the outer surface of the paper cups. Thickness, color changes, Young's modulus and tensile strength, water vapor transmission rate (WVTR) of the coated and uncoated cups, and also popcorns properties (pH, texture, and sensory properties) were evaluated. Water vapor transmission rate, Young's modulus, thickness, total color change index, and tensile strength of coated cups with the optimal coating formulation was 19.785 (g/m2 day), 11.810 (MPa), 276.583 (µm), 1.839, and 11.222 (MPa), respectively. The results showed that paper cup coating increased thickness and yellowness and reduced the brightness, Young's modulus, and WVTR. Coating had a positive effect on the pH and texture of popcorns packaged in coated cups than samples packed in uncoated cups (p < .05). With increasing storage time due to moisture absorption, popcorn changes from crisp to viscoelastic and increases tissue firmness (p < .05). Popcorns' taste in uncoated cups had gained significantly lower scores by panelists compared with the samples packed in coated cups. There was a significant decrease in the general acceptance of popcorn during storage and also the type of coating used in the packaging cup (p < .05). Storage time and type of coating showed no significant effect on the moisture content, odor, and appearance of popcorn. In sensory evaluation, the coated packaging increased the taste, no difference in odor and appearance, and increased the overall acceptance of popcorn compared to the sample in uncoated cups. In general, the results showed that paper cup coating could be a new approach for barrier property improvement in paper-based food packaging and extending the shelf life of the products.