Metabolite analysis of 14C-labeled chloromethylisothiazolinone/methylisothiazolinone for toxicological consideration of inhaled isothiazolinone biocides in lungs.

5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT) used as preservatives in various products, including humidifier disinfectants, presents substantial health hazards. This research delves into the toxicological assessments of CMIT/MIT in the respiratory system using animal models. Through the synthesis of radiolabeled [14C]CMIT and [14C]MIT, we investigated the biological uptake and in vivo behaviors of CMIT/MIT in the respiratory tissues following intratracheal exposure. Quantitative whole-body autoradiography (QWBA) revealed significant persistence of CMIT/MIT in lung tissue. In addition, radio high-performance liquid chromatography (radio-HPLC) with tandem mass spectrometry (LC-MS/MS) was employed for metabolite profiling and identification. Notably, around 28% of the radiolabel was retained in tissue after the extraction step, suggesting covalent binding of CMIT/MIT and their metabolites with pulmonary biomolecules. This observation demonstrates the propensity of the electrophilic isothiazolinone ring in CMIT/MIT to undergo chemical interactions with biothiols in proteins and enzymes, fostering irreversible alterations of biomolecules. Such accumulations of transformations could result in direct toxicity at both cellular and organ levels. Additionally, the detection of metabolites, including a MIT dimer conjugated with glutathione (GSH), as analyzed by mass spectrometry indicates the possible reduction of cellular GSH levels and subsequent oxidative stress. This investigation offers an in-depth insight into the toxic mechanisms of CMIT/MIT, underlying their capability to engage in complex formations with biomacromolecules and induce pronounced respiratory toxicity. These results highlight the imperative for stringent safety assessments of these chemicals, advocating for improved public health and safety measures in the use of chemicals.

MXene/AgNW composite material for selective and efficient removal of radioactive cesium and iodine from water.

Toxic fission products, such as cesium (137Cs) and iodine (129I) are of great concern because of their long half-lives and high solubility in water. The simultaneous removal of Cs and I using a single adsorbent is an area of increasing interest. In this study, MXene/silver nanowire (AgNW) composite was synthesized through physical mixing and employed for simultaneous removal of iodide (I-) and cesium (Cs+) ions from contaminated water. The MXene/AgNW composite demonstrated excellent adsorption capacities of 84.70 and 26.22 mg/g for I- and Cs+, respectively. The experimental data supported the hypothesis of multilayer adsorption of Cs+ owing to the inter-lamellar structures and the presence of heterogeneous adsorption sites in MXene. The interaction between I- and the AgNW involved chemisorption followed by monolayer adsorption. MXene/AgNW composite material exhibited promising results in the presence of competitive ions under extreme pH conditions. Thus, synthesized composite materials holds promising potential as an adsorbent for the remediation of radioactive liquid waste.

Bioaccumulation and in vivo fate of toxic benzylalkyldimethylammonium chloride in rats via the radiotracer analysis.

Benzylalkyldimethylammonium chloride (BAC), a quaternary ammonium compound (QAC), is utilized in industrial and biomedical applications for antimicrobial purposes. Since the coronavirus disease (COVID-19) outbreak, various types of BAC-containing household chemicals have been produced. BACs have several adverse effects; however, their biological uptake, translocation, and excretion in animal models (essential for better understanding in vivo behavior and toxicological impact) remain unclear. In this study, we performed the first biodistribution and whole-body imaging studies of BAC in male Sprague Dawley rats, using two different administration routes. Quantitative whole-body autoradiography (QWBA) data obtained for intranasal 14C-labeled BAC ([14C]C12-BAC) exposure showed substantial uptake values for the respiratory organs (e.g. 346 ng g-1 of lung at 3 h post administration) and the radiotracer was transported to other internal organs. The amount of radiotracer in the heart, adrenal gland, and pancreas were 198, 1410, and 186 ng g-1 tissue respectively at 168 h following exposure. Autoradiograms obtained after intravenous injection also showed high accumulation and slow excretion in these organs. The cumulative excretion analysis revealed that approximately 6.4% of the administered radioactivity remained in rats after a week. The results indicated that continuous inhalation exposure to BAC leads to potential toxic effects in extrapulmonary organs and the respiratory tract. Thus, the radiolabeling method utilized may help assess various synthetic QACs in living subjects.

In vivo tracking of toxic diesel particulate matter in mice using radiolabeling and nuclear imaging.

Exposure to diesel particulate matter (DPM) is associated with several adverse health effects, including severe respiratory diseases. Quantitative analysis of DPM in vivo can provide important information on the behavior of harmful chemicals, as well as their toxicological impacts in living subjects. This study presents whole-body images and tissue distributions of DPM in animal models, using molecular imaging and radiolabeling techniques. The self-assembly of the 89Zr-labeled pyrene analog with a suspension of DPM efficiently produced 89Zr-incorporated DPM (89Zr-DPM). Positron emission tomography images were obtained for mice exposed to 89Zr-DPM via three administration routes: intratracheal, oral, and intravenous injection. DPM was largely distributed in the lungs and only slowly cleared after 7 days in mice exposed via the intratracheal route. In addition, a portion of 89Zr-DPM was translocated to other organs, such as the heart, spleen, and liver. Uptake values in these organs were also noticeable following exposure via the intravenous route. In contrast, most of the orally administered DPM was excreted quickly within a day. These results suggest that continuous inhalation exposure to DPM causes serious lung damage and may cause toxic effects in the extrapulmonary organs.

Biodistribution and respiratory toxicity of chloromethylisothiazolinone/methylisothiazolinone following intranasal and intratracheal administration.

A variety of isothiazolinone-containing small molecules have been registered and used as chemical additives in many household products. However, their biodistribution and potential harmful effects on human health, especially respiratory effects, were not yet identified in sufficient detail. The purpose of this study was to investigate whether a biocide comprising a mixture of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) could reach the lungs and induce lung injury when exposure occurs by two administration routes involving the respiratory tract: intratracheal and intranasal instillation. To investigate the biodistribution of CMIT/MIT, we quantified the uptake of 14C-labeled CMIT/MIT in experimental animals for up to seven days after intratracheal and intranasal instillation. In the toxicity study, lung injury was assessed in mice using total inflammatory cell count in bronchoalveolar lavage fluid (BALF) and lung histopathology. The results of the biodistribution study indicated that CMIT/MIT were rapidly distributed throughout the respiratory tract. Using quantitative whole-body autoradiogram analysis, we confirmed that following intranasal exposure, CMIT/MIT reached the lungs via the respiratory tract (nose-trachea-lung). After 5 min post intratracheal and intranasal instillation, the amount of radiotracer ([14C]CMIT/MIT) in the lungs was 2720 ng g-1 and 752 ng g-1 tissue, respectively, and lung damage was observed. A higher amount of the radiotracer resulted in higher toxicity. Both intratracheal and intranasal instillation of CMIT/MIT increased inflammatory cell counts in the BALF and induced injuries in the alveoli. The frequency and the severity scores of injuries caused by intratracheal instillation were approximately-four to five times higher than those induced by intranasal instillation. Therefore, we concluded that CMIT/MIT could reach the lungs following nasal and intratracheal exposure and cause lung injuries, and the extent of injury was dependent on the exposure dose.

Rapid and Efficient Removal of Anionic Dye in Water Using a Chitosan-Coated Iron Oxide-Immobilized Polyvinylidene Fluoride Membrane.

Anionic dyes are one of the most serious contaminants in water as these molecules are known to be toxic to many living organisms. Herein, we report the development of functionalized polyvinylidene fluoride membranes modified with chitosan-coated iron oxide nanomaterials (Fe-PVDF) for the efficient treatment of anionic dye-contaminated water. Aqueous solutions of anionic dyes could be captured rapidly by passing through the functionalized membrane under reduced pressure. Under neutral conditions, Fe-PVDF showed a maximum removal capacity of 74.6 mg/g for Evans blue (EB) through the adsorption process. In addition, the adsorption capacity was significantly enhanced up to 434.78 mg/g under acidic conditions. The adsorption process for EB matched well with the Langmuir model, indicating monolayer adsorption of the dye to the membrane surface. Moreover, Fe-PVDF can be reusable by a simple washing step in an alkaline solution, and thus, the composite membrane was applied several times without a significant decrease in its adsorption performance. The same composite membrane was further applied to the removal of five other different anionic dyes with high efficiencies. The adsorption mechanism can be explained by the electrostatic interaction between the positively charged chitosan and the negatively charged dye as well as the affinity of the sulfate groups in dye molecules for the surface of the iron oxide nanoparticles. The easy preparation and rapid decolorization procedures make this composite membrane suitable for efficient water treatment.

Removal of Hexavalent Chromium(VI) from Wastewater Using Chitosan-Coated Iron Oxide Nanocomposite Membranes.

Chromium is a toxic and carcinogenic heavy metal that originates from various human activities. Therefore, the effective removal of chromium from aqueous solutions is an extremely important global challenge. Herein, we report a chitosan-coated iron oxide nanoparticle immobilized hydrophilic poly(vinylidene) fluoride membrane (Chi@Fe2O3-PVDF) which can potentially be used for efficient removal of hexavalent chromium(VI) by a simple filtration process. Membrane filtration is an easy and efficient method for treating large volumes of water in a short duration. The adsorption experiments were conducted by batch and continuous in-flow systems. The experimental data showed rapid capture of hexavalent chromium (Cr(VI)) which can be explained by the pseudo-second-order kinetic and Langmuir isotherm model. The nanocomposite membrane exhibited high adsorption capacity for Cr(VI) (14.451 mg/g in batch system, 14.104 mg/g in continuous in-flow system). Moreover, its removal efficiency was not changed significantly in the presence of several competing ions, i.e., Cl-, NO3-, SO42-, and PO43-. Consequently, the Chi@Fe2O3-PVDF-based filtration process is expected to show a promising direction and be developed as a practical method for wastewater treatment.

Recent Progress in Technetium-99m-Labeled Nanoparticles for Molecular Imaging and Cancer Therapy.

Nanotechnology has played a tremendous role in molecular imaging and cancer therapy. Over the last decade, scientists have worked exceptionally to translate nanomedicine into clinical practice. However, although several nanoparticle-based drugs are now clinically available, there is still a vast difference between preclinical products and clinically approved drugs. An efficient translation of preclinical results to clinical settings requires several critical studies, including a detailed, highly sensitive, pharmacokinetics and biodistribution study, and selective and efficient drug delivery to the target organ or tissue. In this context, technetium-99m (99mTc)-based radiolabeling of nanoparticles allows easy, economical, non-invasive, and whole-body in vivo tracking by the sensitive clinical imaging technique single-photon emission computed tomography (SPECT). Hence, a critical analysis of the radiolabeling strategies of potential drug delivery and therapeutic systems used to monitor results and therapeutic outcomes at the preclinical and clinical levels remains indispensable to provide maximum benefit to the patient. This review discusses up-to-date 99mTc radiolabeling strategies of a variety of important inorganic and organic nanoparticles and their application to preclinical imaging studies.

Synthesis and evaluation of curcumin-based near-infrared fluorescent probes for the in vivo optical imaging of amyloid-ß plaques.

The abnormal self-assembly of amyloid-beta (Aß) peptides into oligomers, as well as insoluble fibrils, has been identified as a key factor for monitoring the progression of Alzheimer's disease (AD). The noninvasive imaging of Aß aggregates utilizing chemical probes can be a powerful and practical technique for accurately diagnosing and monitoring the progress of AD, as well as evaluating the effectiveness of therapeutic drug candidates in treating or managing it. Particularly, the near-infrared (NIR) fluorescence imaging of Aß plaques is a potentially promising approach toward the efficient detection of the biomarker. In this study, we describe a new NIR fluorophore, which was based on curcumin derivatives. The fluorophore is equipped with desirable optical properties for in vivo brain imaging. The emission wavelength of the probe, 8b, is 667 nm, and its fluorescent intensity is significantly increased through binding with the Aß aggregates. The probe allows the clear visualization of the Aß plaques 10 min post administration, and the intensity of the fluorescent signal in the brain of a 5XFAD transgenic mouse model is more than three times higher than that of the normal control group. These results demonstrate that the designed probe can be an effective tool for visualizing Aß plaques, as well as investigating the pathological progress of AD.

Removal of Radioactive Iodine Using Silver/Iron Oxide Composite Nanoadsorbents.

Efficient and cost-effective removal of radioactive iodine (radioiodine) from radioactive contaminated water has become a crucial task, following nuclear power plant disasters. Several materials for removing radioiodine have been reported in the literature. However, most of these materials exhibit some limitations, such as high production cost, slow adsorption kinetics, and poor adsorption capacity. Herein, we present silver/iron oxide nanocomposites (Ag/Fe3O4) for the efficient and specific removal of iodine anions from contaminated water. The Ag/Fe3O4 were synthesized using a modified method and characterized via scanning electron microscopy, transmission electron microscopy, and X-ray diffraction analyses. This adsorbent showed a high adsorption capacity for iodine anions (847 mg/g of the adsorbent) in pure water. Next, Ag/Fe3O4 was applied to the removal of radioiodine, and high removal efficiencies were observed in water. In addition, its desalination capacity was retained in the presence of competitive ions and varied pH. After the adsorption process, Ag/Fe3O4 was easily removed from the water by applying an external magnetic field. Moreover, the same operation can be repeated several times without a significant decrease in the performance of Ag/Fe3O4. Therefore, it is expected that the findings presented in this study will offer a new method for desalinating radioiodine in various aqueous media.

Development of a Squaraine-Based Molecular Probe for Dual-Modal in Vivo Fluorescence and Photoacoustic Imaging.

Dual-modular imaging approaches combining near-infrared (NIR) fluorescence (FLI) and photoacoustic imaging (PAI) require suitable contrast agents to produce dual-modular signals. Although nanoparticles have been used to develop PAI agents, small molecule-based imaging agents have not been extensively studied, highlighting the need to design new fluorophores with an enhanced multifunctional ability. Thus, in this study, we designed a novel squaraine (SQ)-based dye and reported its rational preparation and conjugation with a cancer targeting peptide. Specifically, benzoindole-derived SQ (BSQ) showed strong absorption and fluorescence properties at above 650 nm under aqueous conditions, with a maximum absorption and emission at 665 and 680 nm, respectively. Moreover, PA signal scanning experiments revealed a maximum signal intensity in the range 680-700 nm. BSQ was also conjugated with cyclic arginine-glycine-aspartic acid (cRGD) to improve its active targeting ability for the αvß3 integrin, which is overexpressed in various cancer and angiogenic cells. A series of in vitro, in vivo, and ex vivo FLI studies showed that the cRGD conjugated BSQ (BSQ-RGD2) successfully stained and targeted αvß3 integrin-overexpressing tumor cells and xenografts, which were clearly visualized by FLI and PAI. Therefore, BSQ-RGD2 can successfully be applied to dual-modular imaging of the specific biomarker in living animals.

Radioanalytical Techniques to Quantitatively Assess the Biological Uptake and In Vivo Behavior of Hazardous Substances.

Concern about environmental exposure to hazardous substances has grown over the past several decades, because these substances have adverse effects on human health. Methods used to monitor the biological uptake of hazardous substances and their spatiotemporal behavior in vivo must be accurate and reliable. Recent advances in radiolabeling chemistry and radioanalytical methodologies have facilitated the quantitative analysis of toxic substances, and whole-body imaging can be achieved using nuclear imaging instruments. Herein, we review recent literature on the radioanalytical methods used to study the biological distribution, changes in the uptake and accumulation of hazardous substances, including industrial chemicals, nanomaterials, and microorganisms. We begin with an overview of the radioisotopes used to prepare radiotracers for in vivo experiments. We then summarize the results of molecular imaging studies involving radiolabeled toxins and their quantitative assessment. We conclude the review with perspectives on the use of radioanalytical methods for future environmental research.

Proteomic Profiling of Emiliania huxleyi Using a Three-Dimensional Separation Method Combined with Tandem Mass Spectrometry.

Emiliania huxleyi is one of the most abundant marine planktons, and it has a crucial feature in the carbon cycle. However, proteomic analyses of Emiliania huxleyi have not been done extensively. In this study, a three-dimensional liquid chromatography (3D-LC) system consisting of strong cation exchange, high- and low-pH reversed-phase liquid chromatography was established for in-depth proteomic profiling of Emiliania huxleyi. From tryptic proteome digest, 70 fractions were generated and analyzed using liquid chromatography-tandem mass spectrometry. In total, more than 84,000 unique peptides and 10,000 proteins groups were identified with a false discovery rate of ≤0.01. The physicochemical properties of the identified peptides were evaluated. Using ClueGO, approximately 700 gene ontology terms and 15 pathways were defined from the identified protein groups with p-value ≤0.05, covering a wide range of biological processes, cellular components, and molecular functions. Many biological processes associated with CO2 fixation, photosynthesis, biosynthesis, and metabolic process were identified. Various molecular functions relating to protein binding and enzyme activities were also found. The 3D-LC strategy is a powerful approach for comparative proteomic studies on Emiliania huxleyi to reveal changes in its protein level and related mechanism.

Activatable red emitting fluorescent probe for rapid and sensitive detection of intracellular peroxynitrite.

Peroxynitrite (ONOO-), a highly reactive oxygen species generated by the reaction of nitric oxide and superoxide radical anion, is involved in numerous physiological and pathological processes in the human body. To identify important pathogenic mechanisms, it is crucial to develop a reliable tool for detecting peroxynitrite in living systems. In the present study, a new difluoroboron ß-diketonate-based fluorescent probe for detecting exogenous and endogenous peroxynitrite in living systems was designed. The red emitting fluorophore can be synthesized in a simple three-step procedure. This probe reacts quickly and selectively with peroxynitrite and its detection limit is determined to be as low as 19.8 nM. It allows for clear imaging of peroxynitrite in RAW 264.7 cells and was successfully applied to visualize changes of intracellular peroxynitrite induced by reactive oxygen species inhibitors. This designed probe is an effective tool for investigating the physiological and pathological role of peroxynitrite in living cells.

Recent Advances in Bioorthogonal Click Chemistry for Efficient Synthesis of Radiotracers and Radiopharmaceuticals.

In recent years, several catalyst-free site-specific reactions have been investigated for the efficient conjugation of biomolecules, nanomaterials, and living cells. Representative functional group pairs for these reactions include the following: (1) azide and cyclooctyne for strain-promoted cycloaddition reaction, (2) tetrazine and trans-alkene for inverse-electron-demand-Diels-Alder reaction, and (3) electrophilic heterocycles and cysteine for rapid condensation/addition reaction. Due to their excellent specificities and high reaction rates, these conjugation methods have been utilized for the labeling of radioisotopes (e.g., radiohalogens, radiometals) to various target molecules. The radiolabeled products prepared by these methods have been applied to preclinical research, such as in vivo molecular imaging, pharmacokinetic studies, and radiation therapy of cancer cells. In this review, we explain the basics of these chemical reactions and introduce their recent applications in the field of radiopharmacy and chemical biology. In addition, we discuss the significance, current challenges, and prospects of using bioorthogonal conjugation reactions.

Continuous Flow Removal of Anionic Dyes in Water by Chitosan-Functionalized Iron Oxide Nanoparticles Incorporated in a Dextran Gel Column.

This paper describes a novel chromatographic method for efficient removal of anionic dyes from aqueous solutions. Chitosan-coated Fe3O4 nanoparticles can easily be immobilized on a dextran gel column. Single elution of Evans Blue (EB) solution to the nanoadsorbent-incorporated columns provides high removal efficiency with a maximum adsorption capacity of 243.9 mg/g. We also investigated the influence of initial concentration and solution pH on the removal efficiency of EB. The electrostatic interaction between the adsorbent surface and negatively charged sulfate groups on EB molecules promotes the efficient adsorption of dyes. The equilibrium data matched well with the Langmuir isotherm model, which indicated monolayer dye adsorption onto the adsorbent surface. To extend the application of the current method, we performed further adsorption experiments using other anionic dyes of different colors (Cy5.5, Acid Yellow 25, Acid Green 25, and Acid Red 1). All of these molecules can efficiently be captured under continuous flow conditions, with higher removal efficiency obtained with more negatively charged dyes. These findings clearly demonstrate that the present approach is a useful method for the removal of anionic dye contaminants in aqueous media by adsorption.

Review of Therapeutic Applications of Radiolabeled Functional Nanomaterials.

In the last two decades, various nanomaterials have attracted increasing attention in medical science owing to their unique physical and chemical characteristics. Incorporating radionuclides into conventionally used nanomaterials can confer useful additional properties compared to the original material. Therefore, various radionuclides have been used to synthesize functional nanomaterials for biomedical applications. In particular, several α- or ß-emitter-labeled organic and inorganic nanoparticles have been extensively investigated for efficient and targeted cancer treatment. This article reviews recent progress in cancer therapy using radiolabeled nanomaterials including inorganic, polymeric, and carbon-based materials and liposomes. We first provide an overview of radiolabeling methods for preparing anticancer agents that have been investigated recently in preclinical studies. Next, we discuss the therapeutic applications and effectiveness of α- or ß-emitter-incorporated nanomaterials in animal models and the emerging possibilities of these nanomaterials in cancer therapy.

Efficient and stable radiolabeling of polycyclic aromatic hydrocarbon assemblies: in vivo imaging of diesel exhaust particulates in mice.

As a robust radioanalytical method for tracking carbonaceous particulates in vivo, polycyclic aromatic hydrocarbons from diesel exhaust were labeled with a radioactive-iodine-tagged pyrene analogue. Single-photon emission computed tomography and biodistribution studies showed high uptake and slow clearance of this matter in the respiratory system, which may underlie its severe toxicity.

Silver Nanomaterial-Immobilized Desalination Systems for Efficient Removal of Radioactive Iodine Species in Water.

Increasing concerns regarding the adverse effects of radioactive iodine waste have inspired the development of a highly efficient and sustainable desalination process for the treatment of radioactive iodine-contaminated water. Because of the high affinity of silver towards iodine species, silver nanoparticles immobilized on a cellulose acetate membrane (Ag-CAM) and biogenic silver nanoparticles containing the radiation-resistant bacterium Deinococcus radiodurans (Ag-DR) were developed and investigated for desalination performance in removing radioactive iodines from water. A simple filtration of radioactive iodine using Ag-CAM under continuous in-flow conditions (approximately 1.5 mL/s) provided an excellent removal efficiency (>99%) as well as iodide anion-selectivity. In the bioremediation study, the radioactive iodine was rapidly captured by Ag-DR in the presence of high concentration of competing anions in a short time. The results from both procedures can be visualized by using single-photon emission computed tomography (SPECT) scanning. This work presents a promising desalination method for the removal of radioactive iodine and a practical application model for remediating radioelement-contaminated waters.

Development of a new thiol-reactive prosthetic group for site-specific labeling of biomolecules with radioactive iodine.

In this report, we describe the radiosynthesis of a new thiol-targeting prosthetic group for efficient radioactive iodine labeling of biomolecules. Radioiodination using the precursor 3 was performed to obtain 125I-labeled tetrazole 4b with high radiochemical yield (73%) and radiochemical purity. Using the radiolabeled 4b, a single free cysteine containing peptide and human serum albumin were labeled with 125I in modest-to-good radiochemical yields (65-99%) under mildly reactive conditions. A biodistribution study of [125I]7 in normal ICR mice exhibited lower thyroid uptake values than those of 125I-labeled human serum albumin prepared via a traditional radiolabeling method. Thus, [125I]7 could be employed as an effective radiotracer for molecular imaging and biodistribution studies. The results clearly demonstrate that 4b has the potential to be effectively implemented as a prosthetic group in the preparation of radiolabeled biomolecules.