RESUMEN
Carbon materials are commonly used for soil carbon sequestration and fertilization, which can also affect crop growth by manipulating the rhizosphere bacterial community. However, the comparison of the differences between active carbon (e.g., organic fertilizers) and stable carbon (e.g., biochar) on rhizosphere microdomains is still unclear. Hence, a trial was implemented to explore the influence of control (CK, no fertilizer; NPK, chemical fertilizer), organic fertilizer (CF-O, organic fertilizer; CF-BO, biochar-based organic fertilizer) and biochar material (CF-B, perishable garbage biochar; CF-PMB, pig manure biochar) on the diversity, composition, and interaction of rice rhizosphere bacterial community through 16 S rRNA gene high-throughput sequencing. Our results demonstrate that organic fertilizer increases bacterial alpha-diversity compared to no-carbon supply treatment to the extend, whereas biochar has the opposite effect. The rhizosphere bacterial community composition showed pronounced variations among the various fertilization treatments. The relative abundance in Firmicutes decreased with organic fertilizer application, whereas that in Chloroflexi and Actinobacteria decreased with biochar application. Bacterial network analysis demonstrate that organic fertilizer enhances the complexity and key taxa of bacterial interactions, while biochar exhibits an opposing trend. The findings of our study indicate that organic fertilizer may contribute to a positive and advantageous impact on bacterial diversity and interaction in rice rhizosphere, whereas the influence of biochar is not as favorable and constructive. This study lays the foundation for elucidating the fate of the rhizosphere bacterial community following different carbon material inputs in the context of sustainable agricultural development.
RESUMEN
Ultrafast laser is expected as a promising strategy for micro-LEDs (µ-LEDs) transfer due to its inherent property of suppressing thermal effects. However, its ultrahigh peak power and the unclear transfer mechanism make its transfer quality and efficiency unsatisfactory. Here, the study reports the high-precision mass transfer of 20 µm fine-pitch µ-LEDs via in situ nanoparticles (NPs) resonance enhancement in burst mode ultraviolet picosecond laser irradiation. This technique suppresses the thermal melting effect and rapid cooling behavior of plasma by temporal modulation of the burst mode, generating NPs-induced resonance enhancement that accurately and controllable drives a single unit up to tens of thousands of µ-LEDs. The transfer of large µ-LED arrays with more than 180 000 chips is also demonstrated, showing a transfer yield close to 99.9%, a transfer speed of 700 pcs s-1, and a transfer error of <±1.2 µm. The transferred µ-LEDs perform excellent optoelectronic properties and enable reliable device operation regardless of complex strain environments, providing a reliable strategy for preparing broader classes of 3D integrated photonics devices.
RESUMEN
Sugarcane mosaic virus (SCMV) causes mosaic disease in crops such as maize and sugarcane by its vector-an aphid-and is transmitted top-down into the root system. However, understanding of the effects of the aphid-borne virus on root-associated microbes after plant invasion remains limited. The current project investigated maize root-associated (rhizosphere and endosphere) bacterial communities, potential interspecies interaction, and assembly processes in response to SCMV invasion based on 16S rRNA gene amplicon sequencing. SCMV was detected in the roots 9 days after inoculation, and leaf mosaic and chlorosis appeared. The SCMV invasion markedly reduced the α-diversity of endosphere bacteria compared with uninoculated controls (Mock). The connectivity and complexity of the bacterial co-occurrence network in the root endosphere decreased after SCMV invasion, implying that the plant virus may alter root endophyte-microbial interactions. Moreover, a signature that deviates more from stochastic processes was observed in virus-infected plants. Unexpectedly, the rhizosphere bacterial communities were rarely affected by the viral invasion. This study lays the foundation for elucidating the fate of the microbial component of the plant holobiont following aphid-borne virus exposure. IMPORTANCE Biotic (e.g., soil-borne viruses) stress can alter root-associated bacterial communities, essential in maintaining host plant growth and health. However, the regulation of root-associated microorganisms by plant viruses from shoots is still largely unknown. Our results show that plant virus invasion leads to reduced and simpler inter-microbial communication in the maize endosphere. In addition, stochastic processes act on bacterial community assembly in both rhizosphere and endosphere, and bacterial communities in virus-invaded plant endosphere tend to shift toward deterministic processes. Our study highlights the negative effects of plant viruses on root endophytes from the microbial ecology perspective, which may be microbially mediated mechanisms of plant diseases.
Asunto(s)
Microbiota , Zea mays , Zea mays/genética , Microbiología del Suelo , Microbiota/genética , Raíces de Plantas/microbiología , ARN Ribosómico 16S , Endófitos/genética , Bacterias/genéticaRESUMEN
Soil organic carbon (SOC) is an important C pool of the global ecosystem and is affected by various agricultural practices including fertilization. Excessive nitrogen (N) application is an important field management measure in tea plantation systems. However, the mechanism underlying the impact of N fertilization on SOC, especially the microscopic mechanism remain unclear. The present study explored the effects of N fertilization on C-cycling genes, SOC-degrading enzymes and microbes expressing these enzymes by using a metagenomic approach in a tea plantation under long-term fertilization with different N rates. Results showed that N application significantly changed the abundance of C-cycling genes, SOC-degrading enzymes, especially those associated with labile and recalcitrant C degradation. In addition, the beta-glucosidase and chitinase-expressing microbial communities showed a significant difference under different N rates. At the phylum level, microbial taxa involved in C degradation were highly similar and abundant, while at the genus level, only specific taxa performed labile and recalcitrant C degradation; these SOC-degrading microbes were significantly enriched under N application. Redundancy analysis (RDA) revealed that the soil and pruned litter properties greatly influenced the SOC-degrading communities; pH and DOC of the soil and biomass and total polyphenol (TP) of the pruned litter exerted significant effects. Additionally, the random forest (RF) algorithm revealed that soil pH and dominant taxa efficiently predicted the beta-glucosidase abundance, while soil pH and DOC, pruned litter TP, and the highly abundant microbial taxa efficiently predicted chitinase abundance. Our study indicated that long-term N fertilization exerted a significant positive effect on SOC-degrading enzymes and microbes expressing these enzymes, resulting in potential impact on soil C storage in a perennial tea plantation ecosystem.
Asunto(s)
Camellia sinensis , Celulasas , Quitinasas , Microbiota , Suelo/química , Carbono/análisis , Camellia sinensis/metabolismo , Microbiología del Suelo , Metagenómica , Nitrógeno/análisis , Té , FertilizaciónRESUMEN
Nanogrooves with a minimum feature size down to 30 nm (λ/26) can be formed directly on silicon surface by irradiation from two orthogonal polarized 1064 nm/10 ns fiber laser beams. The creation of such small nanogrooves is attributed to surface thermal stress during resolidification and supercooling with the double laser beams' irradiation. By varying the pulse number and laser fluence, the feature size of narrow grooves on silicon surface can be tuned. The experimental results and numerical calculation of surface thermal behaviors indicated that the high repetition rate of the nanosecond laser leads to the incubation effect and different silicon optical and thermal properties during laser irradiation. Resolution on this scale should be attractive in nanolithography, particularly considering that this method is available in far field and in ambient air.
RESUMEN
Tea plantation can cause strong soil degradation, e.g. acidification, basic nutrient decrease and microbial diversity loss, naturally by its root activity and secondary by practically tremendous synthetic N input. Organic amendments application is considered a practical way to mitigate the above adverse consequence. However, the trade-off between agronomic and environmental effects on the application of the organic amendments is still under debate. Herein, we conducted a long-term field experiment with four treatments, including control (without and fertiliser) (CK), chemical fertiliser treatment (CF), chicken manure treatment (CM) and chicken manure combined with biochar treatment (CMB) to investigate the effects of organic amendments application on soil quality, heavy metal contamination and tea production in a tea plantation. Totally 16 plots were arranged randomly with a completely randomised design. The results showed that CM and CMB treatments improved soil nutrient, mitigated soil acidification and ameliorated soil porosity compared to CF treatment. CMB treatment displayed a relatively high tea yield and quality in three consecutive years of monitoring. However, CM and CMB treatments elevated the heavy metal (HM) potential ecological risk (RI) and Nemerow's composite index (Ps). CM treatment significantly increased available As, Pb, Cu and Zn concentrations compared to CF treatment, while CMB treatment significantly decreased available Cr and Cu concentrations and slightly decreased available Cd, Pb and Ni concentrations compared to CM treatment. But the increase of available As and Zn in CMB treatment compared to CM treatment also indicated adverse effects of biochar addition. The PLS-PM model showed HM risk had direct negative effects on tea quality. Moreover, soil fungal community revealed positive effects on tea yield and negative effects on tea quality. Overall, our study proved that CMB treatment could improve soil quality, reduce available Cr and Ni concentrations, maintain tea yield and increase tea quality.
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Monitoreo del Ambiente/métodos , Fertilizantes , Plomo , Estiércol , Metales Pesados/análisis , Suelo , Contaminantes del Suelo/análisis , TéRESUMEN
Agricultural management is essential to enhance soil ecosystem service function through optimizing soil physical conditions and improving nutrient supply, which is predominantly regulated by soil microorganisms. Several studies have focused on soil biodiversity and function in tea plantation systems. However, the effects of different agriculture managements on soil fertility and microbes remain poorly characterized, especially for what concerns perennial agroecosystems. In this study, 40 soil samples were collected from 10 tea plantation sites in China to explore the effects of ecological and conventional managements on soil fertility, as well as on microbial diversity, community composition, and co-occurrence network. Compared with conventional management, ecological management was found to significantly enhance soil fertility, microbial diversity, and microbial network complexity. Additionally, a significant difference in community composition was clearly observed under the two agriculture managements, especially for rare microbial taxa, whose relative abundance significantly increased under ecological management. Random forest modeling revealed that rare taxa (e.g., Rokubacteria and Mortierellomycota), rather than dominant microbial taxa (e.g., Proteobacteria and Ascomycota), were key variables for predicting soil fertility. This indicates that rare taxa might play a fundamental role in biological processes. Overall, our results suggest that ecological management is more efficient than conventional management in regulating rare microbial taxa and maintaining a good soil fertility in tea plantation systems.
Asunto(s)
Camellia sinensis , Suelo , Agricultura , Ecosistema , Microbiología del Suelo , TéRESUMEN
Recently, there has been remarkable progress of the host-guest doped pure organic room-temperature phosphorescence (RTP) materials. However, it remains a great challenge to develop highly efficient host-guest doping systems. In this study, we have successfully developed a heavy atom free pure organic molecular doped system (benzophenone-thianthrene, respectively) with efficient RTP through a simple host-guest doping strategy. Furthermore, by optimizing the doping ratios, the host-guest material with a molar ratio of 100:1 presented an efficient RTP emission with 46% quantum efficiency and a long lifetime of up to 9.17 ms under ambient conditions. This work will provide an effective way to design new organic doping systems with RTP.
RESUMEN
The atmospheric influence on picosecond laser-induced filamentation in sapphires was investigated under Ar, N2 and O2 conditions provided by a coaxial nozzle. The spatial and temporal evolution of the whole plasma was analyzed on a nanosecond time scale by a time-resolved intensified charge-coupled device (ICCD). The regulation of the filamentation in sapphires by the atmosphere can be attributed to the modulation of the laser energy by surface ablation plasma. The thermal conductivity of the ambient gas is found to be the key factor affecting the surface plasma through a physical model. Ambient gas with higher thermal conductivity can effectively reduce the surface plasma temperature and expansion volume due to higher heat exchange efficiency. It is helpful for reducing the scattering and absorption of the laser energy. Therefore, the longest filamentary track and plasma lifetime were obtained in O2, which has higher thermal conductivity than Ar and N2. It is essential to understand the influence mechanism of ambient gas on filamentation, especially by providing a reliable method to regulate the filamentation induced in solid media.
RESUMEN
Direct fabrication of â¼10 nm features by optical means in far field and in ambient air on semiconductor surfaces is significant for next-generation advances nanomanufacturing. We report here a new method that enables the direct formation of 12 nm (λ/66) features on silicon surfaces. It is processed in far field and in ambient air via the irradiation of orthogonally polarized double femtosecond laser beams. The coupling of orthogonally polarized double femtosecond laser beams and the incubation effect due to multiple femtosecond laser pulses irradiation under high repetition rate enable the 12 nm nanostructures creation parallel to the scanning direction, regardless of scanning path.
RESUMEN
Nitrogen (N) fertilizer is widely used in agricultural ecosystems and influences N transformation processes in the soil such as nitrification. However, whether nitrification is primarily dominated by ammonia-oxidizing bacteria (AOB) or archaea (AOA) under heavy N application is still under debate. In the present work, the effect of long-term (12 years) N fertilization on soil nitrification and the key influencing factors were investigated in acidic tea plantation soil that received four different rates of N application (0, 119, 285, and 569 kg N ha-1 yr-1). Nitrification potential was measured and partitioned using chemical inhibitors. The abundance of functional genes involved in ammonia oxidation was quantified using quantitative polymerase chain reaction (qPCR). Ammonia-oxidizing communities were identified by shotgun metagenome sequencing. Potential nitrification rate in tea plantation soil was mainly dominated by autotrophic nitrification (PNRA) (71-79%). PNRA and heterotrophic nitrification (PNRH) were both significantly increased by heavy N (569 kg ha-1) application. Moreover, PNRA was mainly due to the contribution of AOB (52-66%) in N-treated soils, and N569 significantly increased the AOB contribution without affecting the AOA contribution. N569 increased the functional gene abundance of AOB and TAO100 (a non-halophilic γ-AOB) but decreased that of AOA. The dominant AOB (Nitrosomonas, Nitrosospira, and Nitrosococcus), AOA (Nitrososphaera and Nitrosopumilus) and commamox (Nitrospira) groups were profoundly altered by long-term N application rates. Partial least squares regression showed that total nitrification (PNRT), PNRA, and PNRAOB were primarily explained by the functional gene abundance of nitrifiers whereas PNRH and PNRAOA were closely associated with soil and pruned litter properties. Moreover, structural equation modeling (SEM) revealed that long-term N application significantly and indirectly affected nitrification potential by directly influencing soil properties, pruned litter properties, and functional gene abundance. Understanding the relative contribution of AOA and AOB to nitrification may help to better regulate N fertilizer use in agricultural ecosystems.
Asunto(s)
Archaea , Camellia sinensis , Amoníaco , Bacterias , Ecosistema , Nitrificación , Nitrógeno , Oxidación-Reducción , Filogenia , Suelo , Microbiología del Suelo , TéRESUMEN
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.
RESUMEN
Displaying a full or tuneable emission spectrum with highly efficient is significant for luminescent materials used in solid-state lighting. Silicon carbide (SiC) has potential for use in photoelectric devices that operate under extreme conditions. In this paper, we present a method to selectively modify the photoluminescence (PL) properties of SiC by ultrafast laser direct writing. Based on this method, visible white PL could be observed by the naked eye at room temperature under ultraviolet excitation. By increasing the laser power intensity from 40 to 80 MW/cm2, the PL of the irradiated samples increased and pure white sunlight-like emission with controlled colour temperature was realised. The optimised laser power intensity of 65 MW/cm2 achieved a desirable colour temperature similar to that of sunlight (x = 0.33, y = 0.33 and colour temperature of 5500 K) and suppressed blue emission. By direct laser irradiation along designed scanning path, a large-scale and arbitrary pattern white emission was fabricated. The origin of the white luminescence was a mixture of multiple luminescent transitions of oxygen-related centres that turned the Si-C system into silicon oxycarbide. This work sheds light on new luminescent materials and a preparation technique for next-generation lighting devices.
RESUMEN
OBJECTIVE: The aim of this study was to compare the recycling of deboned ceramic brackets via an Er:YAG laser or via the traditional chairside processing methods of flaming and sandblasting; shear bond strength and morphological changes were evaluated in recycled brackets versus new brackets. MATERIALS AND METHODS: 3M Clarity Self-Ligating Ceramic Brackets with a microcrystalline base were divided into groups subjected to flaming, sandblasting, or exposure to an Er:YAG laser. New ceramic brackets served as a control group. Shear bond strengths were determined with an Electroforce test machine and tested for statistical significance through analysis of variance. Morphological examinations of the recycled ceramic bracket bases were conducted with scanning electron microscopy and confocal laser scanning microscopy. Residue on the bracket base was analyzed with Raman spectroscopy. RESULTS: Faded, dark adhesive was left on recycled bracket bases processed via flaming. Adhesive was thoroughly removed by both sandblasting and exposure to an Er:YAG laser. Compared with new brackets, shear bond strength was lower after sandblasting (p < 0.05), but not after exposure to an Er:YAG laser. The Er:YAG laser caused no damage to the bracket. CONCLUSION: Er:YAG lasers effectively remove adhesive from the bases of ceramic brackets without damaging them; thus, this method may be preferred over other recycling methods.
Asunto(s)
Cerámica/química , Soportes Ortodóncicos , Diente Premolar/fisiología , Cerámica/efectos de la radiación , Cementos Dentales , Humanos , Láseres de Estado Sólido , Ensayo de Materiales , Resistencia al Corte , Espectrometría RamanRESUMEN
Here we report strong enhancement in ultraviolet-photoluminescence (UV-PL) of ZnO thin films (grown on a SiC substrate) covered by monolayer dielectric fused silica or polystyrene microspheres with diameters ranging from 0.5 to 7.5 µm. The excited light scatted in the film is collected by the microspheres to stimulate whispering gallery modes, by which the internal quantum efficiency of spontaneous emission is enhanced. Meanwhile, the microsphere monolayer efficiently couples emitted light energy from the luminescent film to the far-field for PL detection. A UV-PL enhancement up to 10-fold via a 5-µm-diameter microsphere monolayer is experimentally demonstrated in this work. The unique optical property of microsphere in photoluminescence (PL) enhancement makes them promising for high-sensitivity PL measurements as well as design of photoelectric devices with low loss and high efficiency.
Asunto(s)
Luz , Mediciones Luminiscentes/instrumentación , Microesferas , Óxido de Zinc/química , LuminiscenciaRESUMEN
OBJECTIVE: The aim of this study was to compare the effect of a KrF excimer laser versus traditional chairside deboned bracket processing methods of grinding, flaming, and sandblasting on the shear bond strength and morphological change of recycled brackets. BACKGROUND DATA: Bracket dislodgement happens frequently in orthodontic treatment. METHODS: The Victory Series bracket with a foil-mesh base and the Mini Sprint bracket with a raised base were chosen in this research. Grind, flame, sandblast, and laser groups acted as the experimental groups, and the new bracket group served as control. The shear bond strengths were determined with an Electroforce test machine and statistically tested by an analysis of variance (ANOVA). Morphological examinations of the recycled bracket bases were conducted with scanning electron microscopy and confocal laser scanning microscopy. Bracket base residue content was analyzed using Raman spectroscopy. RESULTS: The study showed that adhesive was left on the recycled bracket base processed by grinding and flaming, with significantly decreased shear bond strength (p<0.05). Sandblasting and KrF excimer lasering both thoroughly removed the adhesive. Shear bond strength decreased with sandblasting in the Victory bracket but not in the Mini Sprint bracket. Shear bond strength of KrF-lasered recycled brackets did not differ statistically from that of both kinds of new brackets. The study also showed that KrF excimer laser caused limited damage to the bracket. CONCLUSIONS: The KrF excimer laser can remove adhesive on the two different bracket bases effectively, causing little damage to the bracket; therefore, it is a superior bracket refurbishing method worth further study.
Asunto(s)
Recubrimiento Dental Adhesivo , Rayos Láser , Soportes Ortodóncicos , Resistencia al Corte , Metales , ReciclajeRESUMEN
This paper reports an investigation into the characteristics of femtosecond laser (800-nm central wavelength) in the ablation of human dental enamel, dentine, and cementum at various laser fluences from 0.2 to 3.68 J/cm(2) with single and multiple pulses. The femtosecond laser interaction with cementum is reported for the first time. Ablation thresholds were determined to be 0.58, 0.44, and 0.51 J/cm(2) for enamel, dentine, and cementum, respectively. Under the average laser fluences of 1.13 to 3.68 J/cm(2), clean ablated surfaces without debris and microcracks were obtained. Laser fluence was found to influence the ablated diameter and depth, whereas under a certain fluence, pulse number only affects the depth, without affecting the diameter. The ablation mechanism is found to be based on multi-photon absorption, not previously known for femtosecond laser ablation of dental materials. The low thermal loads of 0.708, 1.44, and 0.404 J/cm(3) required for ablating enamel, dentine, and cementum, determined for the first time, are beneficial for minimizing the heat-affected zones and micro-damage. The Raman spectroscopic analysis of phosphate shows that the chemical components of the tooth remain intact before and after the fs-laser ablation. It also shows that different dental tissues respond differently to the laser irradiation.