Mechanical properties and crown accuracy of additively manufactured zirconia restorations.

OBJECTIVES: We evaluated the mechanical properties of zirconia restorations produced via additive manufacturing (AM) and the crown accuracy of zirconia crowns. METHODS: Zirconia disks, bars, and crowns were manufactured via subtractive (CNC group) and additive manufacturing (AM group) techniques. Disk-shaped specimens in each group were autoclaved at 134 °C and 216 kPa for 5, 10, and 24 h. The phases of the specimens were analyzed using an X-ray diffractometer. The flexural strengths were measured via biaxial flexural tests. The morphologies were examined using a scanning electron microscope. The correlation between the m-phase fraction and biaxial flexural strength by autoclave time in each group was analyzed via linear mixed model and Pearson's correlation analysis. For each group, crown specimens were used to assess the marginal and internal gaps using the replica technique. Buccolingual and mesiodistal cross-sections were measured, and a repeated measures one-way ANOVA was performed. RESULTS: Linear mixed model analysis indicated that for both groups, with an increase in the autoclave time, the flexural strength decreased, whereas the m-phase fraction increased. Pearson's correlation analysis revealed no correlation between the m-phase fraction and flexural strength for either group. A repeated measures one-way ANOVA was conducted on instrumented sections (buccal, lingual, mesial, and distal), revealing that the marginal and internal gaps of AM-produced zirconia crowns were less accurate than those of CNC-produced zirconia crowns. SIGNIFICANCE: These findings suggest that additively produced zirconia restorations have mechanical properties comparable to those of conventionally produced ceramics and may be suitable for clinical applications.

Microbial keratitis in the subtropical region of Korea: a comprehensive 12-year retrospective review at a single referral center.

OBJECTIVES: To investigate the epidemiological characteristics and clinical outcomes of culture-proven bacterial and fungal keratitis at a single tertiary referral centre on Jeju Island, South Korea. DESIGN: A retrospective study design. SETTING: Data from a solitary referral centre on Jeju Island spanning January 2011 to December 2022. PARTICIPANTS: Among the 245 patients clinically diagnosed with infectious microbial keratitis, 110 individuals had culture-positive results. PRIMARY AND SECONDARY OUTCOME MEASURES: The primary outcome was the identification of causative microbial profiles and epidemiological characteristics, while the secondary outcome was the correlation of these factors with treatment outcomes. RESULTS: Of 245 patients, 110 (44.9%) had culture-positive infectious keratitis, showing 69 bacterial, 32 fungal, 4 superimposed bacterial and 5 cases with coinfection by bacteria and fungus. The most common pathogen was Pseudomonas species in 14.4% of the bacterial keratitis cases, followed by Staphylococcus epidermidis (9%), Staphylococcus aureus (8%) and Moraxella species (7%). The total treatment success rate for bacterial keratitis was 67.5%. The frequency of methicillin-resistant Staphylococcus on Jeju Island did increase during the study period. Fusarium species had the highest incidence at 22.2%, followed by Candida (16.7%) and Colletotrichum species (11.1%). 56.7% of fungal keratitis patients were successfully treated. An initial large corneal lesion (>3 mm) showed a statistically significant association with treatment failure. CONCLUSION: The incidence of Moraxella and Colletotrichum species in our study was higher than that reported in other districts with different climates and environments. The results reported here reflect the unique environmental features of Jeju Island, characterised by high humidity and temperatures.

Genotype Analysis of Respiratory Syncytial Virus Before and After the COVID-19 Pandemic Using Whole-Genome Sequencing: A Prospective, Single-Center Study in Korea From 2019 to 2022.

BACKGROUND: Respiratory syncytial virus (RSV), a highly transmissible virus, is the leading cause of lower respiratory tract infections. We examined molecular changes in the RSV genome before and after the coronavirus disease 2019 (COVID-19) pandemic in Korea, and investigated whether drug-resistant mutations were present. METHODS: In this prospective, single-center study, RSV-positive respiratory samples were collected between September 2019 and December 2022. Long-read whole-genome sequencing (WGS) was performed, and the presence of known drug-resistant substitutions for palivizumab, nirsevimab, and suptavumab was investigated. RESULTS: Overall, 288 respiratory samples were collected from 276 children. WGS data were available for 133 samples (71 and 62 samples from the pre- and post-pandemic periods, respectively). All RSV-A strains (n = 56) belonged to the GA2.3.5 (ON1) genotype, whereas all RSV-B strains (n = 77) belonged to the GB5.0.5a (BA) genotype. No significant differences in genotypes were observed between the pre- and post-pandemic periods. In addition, no notable mutations related to nirsevimab or palivizumab resistance were detected in the F gene. However, the L172Q and S173L substitutions, which are known to confer resistance to suptavumab, were present in all RSV-B samples. CONCLUSION: Despite the unprecedented interruption of RSV seasonality, there were no significant molecular changes in circulating RSV strains in Korea related to nirsevimab or palivizumab resistance before and after the COVID-19 pandemic. However, RSV-specific drug-resistance substitutions for suptavumab were identified.

The Impact of an Antimicrobial Stewardship Program on Days of Therapy in the Pediatric Center: An Interrupted Time-Series Analysis of a 19-Year Study.

BACKGROUND: We aimed to analyze the effects of an antimicrobial stewardship program (ASP) on the proportion of antimicrobial-resistant pathogens in bacteremia, antimicrobial use, and mortality in pediatric patients. METHODS: A retrospective single-center study was performed on pediatric inpatients under 19 years old who received systemic antimicrobial treatment from 2001 to 2019. A pediatric infectious disease attending physician started ASP in January 2008. The study period was divided into the pre-intervention (2001-2008) and the post-intervention (2009-2019) periods. The amount of antimicrobial use was defined as days of therapy per 1,000 patient-days, and the differences were compared using delta slope (= changes in slopes) between the two study periods by an interrupted time-series analysis. The proportion of resistant pathogens and the 30-day overall mortality rate were analyzed by the χ². RESULTS: The proportion of extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli and Klebsiella pneumoniae bacteremia increased from 17% (39 of 235) in the pre-intervention period to 35% (189 of 533) in the post-intervention period (P < 0.001). The total amount of antimicrobial use significantly decreased after the introduction of ASP (delta slope value = -16.5; 95% confidence interval [CI], -30.6 to -2.3; P = 0.049). The 30-day overall mortality rate in patients with bacteremia did not increase, being 10% (55 of 564) in the pre-intervention and 10% (94 of 941) in the post-intervention period (P = 0.881). CONCLUSION: The introduction of ASP for pediatric patients reduced the delta slope of the total antimicrobial use without increasing the mortality rate despite an increased incidence of ESBL-producing gram-negative bacteremia.

Behavior of Extracranial-to-Intracranial Extended Arterial Dissections of the Vertebral Artery.

BACKGROUND: Vertebral artery dissections (VADs) may extend from the extracranial to the intracranial vasculature (e+iVAD). We evaluated how the characteristics of e+iVAD differed from those of intracranial VAD (iVAD). METHODS AND RESULTS: From 2002 to 2019, among consecutive patients with cervicocephalic dissection, those with iVAD and e+iVAD were included, and their clinical characteristics were compared. In patients with unruptured dissections, a composite clinical outcome of subsequent ischemic events, subsequent hemorrhagic stroke, or mortality was evaluated. High-resolution magnetic resonance images were analyzed to evaluate intracranial remodeling index. Among 347 patients, 51 (14.7%) had e+iVAD and 296 (85.3%) had iVAD. The hemorrhagic presentation occurred solely in iVAD (0.0% versus 19.3%), whereas e+iVAD exhibited higher ischemic presentation (84.3% versus 27.4%; P<0.001). e+iVAD predominantly presented steno-occlusive morphology (88.2% versus 27.7%) compared with dilatation patterns (11.8% versus 72.3%; P<0.001) of iVAD. The ischemic presentation was significantly associated with e+iVAD (iVAD as a reference; adjusted odds ratio, 3.97 [95% CI, 1.67-9.45]; P=0.002]). Patients with unruptured VAD showed no differences in the rate of composite clinical outcome between the groups (log-rank, P=0.996). e+iVAD had a lower intracranial remodeling index (1.4±0.3 versus 1.6±0.4; P<0.032) and a shorter distance from dural entry to the maximal dissecting segment (6.9±8.4 versus 15.7±7.4; P<0.001). CONCLUSIONS: e+iVAD is associated with lower rates of hemorrhages and higher rates of ischemia than iVAD at the time of admission. This may be explained by a lower intracranial remodeling index and less deep intrusion of the dissecting segment into the intracranial space.

Butein derivatives prevent obesity and improve insulin resistance through the induction of energy expenditure in high-fat diet-fed obese mice.

Obesity is a global public health problem and is related with fatal diseases such as cancer and cardiovascular and metabolic diseases. Medical and lifestyle-related strategies to combat obesity have their limitations. White adipose tissue (WAT) browning is a promising strategy for increasing energy expenditure in individuals with obesity. Uncoupling protein 1 (UCP1) drives WAT browning. We previously screened natural products that enable induction of Ucp1 and demonstrated that these natural products induced WAT browning and increased energy expenditure in mice with diet-induced obesity. In this study, we aimed to extensively optimise the structure of compound 1, previously shown to promote WAT browning. Compound 3 s exhibited a significantly higher ability to induce Ucp1 in white and brown adipocytes than did compound 1. A daily injection of compound 3 s at 5 mg/kg prevented weight gain by 13.6 % in high-fat diet-fed mice without any toxicological observation. In addition, compound 3 s significantly improved glucose homeostasis, decreased serum triacylglycerol levels, and reduced total cholesterol and LDL cholesterol levels, without altering dietary intake or physical activity. Pharmaceutical properties such as solubility, lipophilicity, and membrane permeability as well as metabolic stability, half-life (T1/2), and blood exposure ratio of i.p to i.v were significantly improved in compound 3 s when compared with those in compound 1. Regarding the mode of action of WAT browning, the induction of Ucp1 and Prdm4 by compounds 1 and 3 s was dependent on Akt1 in mouse embryonic fibroblasts. Therefore, this study suggests the potential of compound 3 s as a therapeutic agent for individuals with obesity and related metabolic diseases, which acts through the induction of WAT browning as well as brown adipose tissue activation.

Dimensional accuracy and surface characteristics of complete-arch cast manufactured by six 3D printers.

Objective: This in vitro study aimed to quantitatively and qualitatively evaluate and compare the horizontal and vertical accuracies of complete-arch casts produced by six 3D printers with different printing principles and resolutions using a low-viscosity resin material. Methods: A reference cast was designed by CAD software. The 3D printers used were DLPa (Asiga MAX), DLPk (cara Print 4.0), LCD2o (Ondemand 2 K Printer), LCD2p (Photon Mono X), LCD4s (SONIC 4 K), and SLA (ZENITH U). Ten casts were printed for each 3D printer using a low-viscosity resin. The accuracy of each printed cast was evaluated using shell-to-shell deviations, 12 linear, one angular, and five height deviations, with a reference cast as the control. The surface features of the casts were examined using field-emission scanning electron microscopy (FE-SEM) and digital cameras. Results: The evaluation of shell-to-shell deviation revealed that DLPa and SLA printers exhibited low trueness values, whereas LCD printers displayed high trueness values. Among the LCD printers, LCD4s and LCD2o exhibited the lowest and highest trueness values, respectively. DLPa printers showed lower trueness values for intercanine and intermolar distances, whereas LCD printers generally demonstrated high trueness values. However, LCD4s exhibited similar trueness values to those of SLA and DLPk. The height deviation was smallest in the anterior area, whereas the largest height deviation occurred in the canine teeth. The surface characteristics indicated that the SLA casts had greater light reflection and blunt canine tips. The FE-SEM observations highlighted that the LCD and DLP printers exhibited varying layer characteristics, with some presenting rough and uneven borders in the anterior lingual area. Significance: The accuracy of 3D printed casts varied among the 3D printer groups: DLPa and SLA were accurate for shell-to-shell deviation, with DLPa being the most accurate for linear and angular deviations. Regardless of the XY resolution, the DLP printers outperformed the LCD printers. Among the LCD group of 3D printers, higher-resolution LCD4s demonstrated increased accuracy. The SLA exhibited soft layer borders in the FE-SEM owing to its laser spot characteristics and prominent light reflection in the digital camera images.

Revascularisation patterns and characteristics after erythropoietin pretreatment and multiple burr holes in patients who had acute stroke with perfusion impairment.

BACKGROUND: Transdural collaterals, originating mainly from the extracalvarial superficial temporal artery and intracalvarial middle meningeal artery via the external carotid artery (ECA), have been observed after revascularisation surgery. However, the origin of these collaterals in patients with stroke with perfusion insufficiency is not yet known. Therefore, we studied the revascularisation patterns and characteristics based on the origin of these collaterals. METHODS: We employed erythropoietin pretreatment and performed multiple burr holes under local anaesthesia to achieve transdural revascularisation in patients with acute stroke with perfusion insufficiency. After 6 months, we reassessed the transfemoral cerebral angiography to evaluate the revascularisation patterns. The collaterals were categorised into intracalvarial ECA-dominant (originating from the middle meningeal artery), extracalvarial ECA-dominant (originating from the superficial temporal or occipital artery) and balanced groups. We compared various imaging parameters among these groups. RESULTS: Overall, 87 patients with 103 treated hemispheres were involved. Among them, 57.3% were classified as intracalvarial ECA-dominant, 20.4% as extracalvarial ECA-dominant and 22.3% as balanced. Most of the hemispheres with intracalvarial or extracalvarial collaterals (vs balanced collaterals) showed successful revascularisation (78/80 (97.5%) vs 12/23 (52.1%)), p<0.001). In ultrasonographic haemodynamic changes according to revascularisation pattern, only the intracalvarial ECA-dominant revascularisation was significantly associated with specific changes in ECA blood flow, leading to the conversion to a low-resistance ECA Doppler sonography waveform. CONCLUSIONS: Our findings suggest that intracalvarial ECA-dominant revascularisation plays a crucial role in the formation of transdural collaterals following combined therapy. These distinct changes in ECA haemodynamics can be non-invasively identified through bedside ultrasound studies.

Ruxolitinib Improves Immune-Dysregulation Features but not Epigenetic Abnormality in a Patient with STAT1 GOF.

PURPOSE: Patients with STAT1 gain-of-function (GOF) mutations often exhibit autoimmune features. The JAK1/2 inhibitor ruxolitinib can be administered to alleviate autoimmune symptoms; however, it is unclear how immune cells are molecularly changed by ruxolitinib treatment. Then, we aimed to investigate the trnscriptional and epigenetic status of immune cells before and after ruxolitinib treatment in a patient with STAT1 GOF. METHODS: A patient with a heterozygous STAT1 GOF variant (p.Ala267Val), exhibiting autoimmune features, was treated with ruxolitinib, and peripheral blood mononuclear cells (PBMCs) were longitudinally collected. PBMCs were transcriptionally analyzed by single-cell cellular indexing of the transcriptomes and epitopes by sequencing (CITE-seq), and epigenetically analyzed by assay of transposase-accessible chromatin sequencing (ATAC-seq). RESULTS: CITE-seq analysis revealed that before treatment, the patient's PBMCs exhibited aberrantly activated inflammatory features, especially IFN-related features. In particular, monocytes showed high expression levels of a subset of IFN-stimulated genes (ISGs). Ruxolitinib treatment substantially downregulated aberrantly overexpressed ISGs, and improved autoimmune features. However, epigenetic analysis demonstrated that genetic regions of ISGs-e.g., STAT1, IRF1, MX1, and OAS1-were highly accessible even after ruxolitinib treatment. When ruxolitinib was temporarily discontinued, the patient's autoimmune features were aggravated, which is in line with sustained epigenetic abnormality. CONCLUSIONS: In a patient with STAT1 GOF, ruxolitinib treatment improved autoimmune features and downregulated aberrantly overexpressed ISGs, but did not correct epigenetic abnormality of ISGs.

Incidence and disease burden of autoimmune inflammatory rheumatic diseases after non-pharmaceutical interventions in the COVID-19 era: A nationwide observational study in Korea.

BACKGROUND: Infections are considered risk factors for autoimmune inflammatory rheumatic diseases (AIRDs), the incidence of which is considered to have been impacted by the COVID-19 pandemic. The impact of non-pharmaceutical interventions (NPIs) on the incidence of AIRDs and their associated health care services and medical expenses in Korea was investigated. METHODS: We included all AIRD cases reported between January 2016 and February 2021 based on the National Health Insurance Service data. We evaluated changes in incidence trends for each AIRD before and after NPI implementation (Feb 2020 to Feb 2021) using segmented regression analysis. Changes in health care utilization and medical costs for each AIRD before and after NPI implementation were also investigated. RESULTS: After NPI implementation, monthly incidence rates declined significantly by 0.205 per 1 000 000 (95% confidence interval [CI], -0.308 to -0.101, p < .001) in patients with systemic lupus erythematosus (SLE). No significant changes in the incidence of all AIRDs other than SLE were observed before and after implementation. Further, annual outpatient department visits per patient were lower during implementation for all diseases, except juvenile idiopathic arthritis (JIA). The prescription days per outpatient visit increased significantly during implementation for all diseases, except JIA and ankylosing spondylitis. During implementation, the total annual medical costs per patient tended to decrease for all diseases, except JIA and mixed connective tissue disease. CONCLUSION: Implementation of NPIs to contain the pandemic led to a reduction in the incidence of SLE and changed patterns of medical care utilization and treatment cost for most AIRDs.

Trueness, physical properties, and surface characteristics of additive-manufactured zirconia crown.

OBJECTIVE: This study aimed to conduct a comparison of trueness and physical and surface properties among five distinct types of additive manufactured (AM) zirconia crowns and zirconia crowns produced using the subtractive manufacturing (SM). MATERIAL AND METHODS: Zirconia crowns were fabricated using five distinct techniques, each varying in the method of slurry transfer and photocuring source. Each experimental group utilized either one of the four digital light processing (DLP)-based techniques (DLP spreading, DLP spreading gradation, DLP vat and DLP circular spreading) or the stereolithography (SLA)-based technique (SLA spreading). The control (CON) group employed SM. To assess accuracy, trueness was measured between the scan and reference data. To analyze the physical properties, voids were examined using high-energy spiral micro-computed tomography scans, and the crystal structure analysis was performed using X-ray diffraction (XRD). Surface roughness was assessed through laser scanning microscopy. RESULTS: Differences in the trueness of internal surfaces of crowns were found among the groups (P < 0.05). Trueness varied across the measurement surfaces (occlusal, lateral, and marginal) in all the groups except for the DLP spreading gradation group (P < 0.05). Voids were observed in all AM groups. All groups showed similar XRD patterns. All AM groups showed significantly greater surface roughness compared to the CON group (P < 0.001). CONCLUSION: The AM zirconia crowns showed bubbles and a rougher surface compared to the SM crowns. All groups exhibited typical zirconia traits and trueness levels within clinically acceptable limits, suggesting that current zirconia AM techniques could be suitable for dental applications.

RNF213 variant and autophagic impairment: A pivotal link to endothelial dysfunction in moyamoya disease.

Moyamoya disease (MMD) is closely associated with the Ring Finger Protein 213 (RNF213), a susceptibility gene for MMD. However, its biological function remains unclear. We aimed to elucidate the role of RNF213 in the damage incurred by human endothelial cells under oxygen-glucose deprivation (OGD). We analyzed autophagy in peripheral blood mononuclear cells (PBMCs) derived from patients carrying either RNF213 wildtype (WT) or variant (p.R4810K). Subsequently, human umbilical vein endothelial cells (HUVECs) were transfected with RNF213 WT (HUVECWT) or p.R4810K (HUVECR4810K) and exposed to OGD for 2 h. Immunoblotting was used to analyze autophagy marker proteins, and endothelial function was analyzed by tube formation assay. Autophagic vesicles were observed using transmission electron microscopy. Post-OGD exposure, we administered rapamycin and cilostazol as potential autophagy inducers. The RNF213 variant group during post-OGD exposure (vs. pre-OGD) showed autophagy inhibition, increased protein expression of SQSTM1/p62 (p < 0.0001) and LC3-II (p = 0.0039), and impaired endothelial function (p = 0.0252). HUVECR4810K during post-OGD exposure (versus pre-OGD) showed a remarkable increase in autophagic vesicles. Administration of rapamycin and cilostazol notably restored the function of HUVECR4810K and autophagy. Our findings support the pivotal role of autophagy impaired by the RNF213 variant in MMD-induced endothelial cell dysfunction.

Influence of crown shade, translucency, and scan powder application on the trueness of intraoral scanners.

OBJECTIVES: Natural teeth and dental restorations present with various shades and levels of translucency. This study aimed to determine whether these variations in ceramic crowns and scan powder application affect the trueness of intraoral scanners. METHODS: Eight identical premade resin typodonts, each prepared for a crown on the maxillary right second molar, were used. Eight lithium disilicate crowns, distinguished by two levels of translucency (high and low) and four shades (BL1, A2, A3, and A4), were fabricated to an identical design and cemented onto each typodont, providing eight distinct experimental groups (2 levels of translucency × 4 shades). Reference scans were acquired using a desktop scanner. Test scans were performed ten times for each experimental group using two different intraoral scanners (Medit i700 and CEREC Primescan AC), with and without the application of scan powder (n = 10). Three-dimensional metrology software was used to assess the trueness of the intraoral scan datasets. Statistical analysis involved the Kruskal-Wallis H test, Mann-Whitney U test, and independent t-test (α=0.05). RESULTS: For powder-free intraoral scan datasets, the crown shade did not significantly affect trueness within each translucency group (P = 1.000). For both intraoral scanners, compared with low translucency groups, higher marked deviations were exhibited by high translucency groups (P<.001). Scan powder use largely mitigated these differences (P>.05) and enhanced the trueness of the intraoral scan (P<.01). CONCLUSIONS: Shade did not significantly influence the trueness of intraoral scans. High-translucency crowns were scanned with less accuracy than were low-translucency crowns. CLINICAL SIGNIFICANCE: Unlike tooth shade, translucency significantly affected the accuracy of intraoral scans. Therefore, considering the use of scan powder when scanning objects with high translucency may be beneficial.

Prevention of Cytomegalovirus Infection in Solid Organ Transplant Recipients: Guidelines by the Korean Society of Infectious Diseases and the Korean Society for Transplantation.

Cytomegalovirus (CMV) is the most important opportunistic viral pathogen in solid organ transplant (SOT) recipients. The Korean guideline for the prevention of CMV infection in SOT recipients was developed jointly by the Korean Society for Infectious Diseases and the Korean Society of Transplantation. CMV serostatus of both donors and recipients should be screened before transplantation to best assess the risk of CMV infection after SOT. Seronegative recipients receiving organs from seropositive donors face the highest risk, followed by seropositive recipients. Either antiviral prophylaxis or preemptive therapy can be used to prevent CMV infection. While both strategies have been demonstrated to prevent CMV infection post-transplant, each has its own advantages and disadvantages. CMV serostatus, transplant organ, other risk factors, and practical issues should be considered for the selection of preventive measures. There is no universal viral load threshold to guide treatment in preemptive therapy. Each institution should define and validate its own threshold. Valganciclovir is the favored agent for both prophylaxis and preemptive therapy. The evaluation of CMV-specific cell-mediated immunity and the monitoring of viral load kinetics are gaining interest, but there was insufficient evidence to issue recommendations. Specific considerations on pediatric transplant recipients are included.

The First Case of a Korean Patient with a Mutation-Confirmed Tumor Necrosis Factor Receptor-Associated Periodic Syndrome.

Tumor necrosis factor receptor-associated periodic syndrome (TRAPS, OMIM: #142680) is a rare autoinflammatory disease (AID) with recurrent febrile episodes. To our knowledge, we report herein the first case of a patient with TRAPS in South Korea whose symptoms included fever, arthralgia, abdominal pain, rash, myalgia, cough, and lymphadenopathy. A pathogenic de novo mutation, c.175T>C (p.Cys59Arg), in the tumor necrosis factor receptor superfamily member 1A (TNFRSF1A) gene, was confirmed by gene sequencing. The patient has been with tocilizumab (an interleukin-6 inhibitor); tocilizumab administration every other week has completely alleviated the patient's symptoms. Our report further expands the clinical spectrum of patients with TRAPS and reaffirms the use of tocilizumab as a viable alternative treatment option for those patients who are unsatisfactorily responsive to other commonly used biologics, such as canakinumab, anakinra, infliximab, and etanercept. Furthermore, our report may aid in increasing awareness about the existence of mutation-confirmed TRAPS in South Korea in addition to emphasizing the importance of actively pursuing genetic testing to correctly diagnose rare AID.

Bio-Inspired Organic Synaptor with In Situ Ion-Doped Ultrathin Polyelectrolyte Containing Acetylcholine-Like Cation.

An ion-based synaptic transistor (synaptor) is designed to emulate a biological synapse using controlled ion movements. However, developing a solid-state electrolyte that can facilitate ion movement while achieving large-scale integration remains challenging. Here, a bio-inspired organic synaptor (BioSyn) with an in situ ion-doped polyelectrolyte (i-IDOPE) is demonstrated. At the molecular scale, a polyelectrolyte containing the tert-amine cation, inspired by the neurotransmitter acetylcholine is synthesized using initiated chemical vapor deposition (iCVD) with in situ doping, a one-step vapor-phase deposition used to fabricate solid-state electrolytes. This method results in an ultrathin, but highly uniform and conformal solid-state electrolyte layer compatible with large-scale integration, a form that is not previously attainable. At a synapse scale, synapse functionality is replicated, including short-term and long-term synaptic plasticity (STSP and LTSP), along with a transformation from STSP to LTSP regulated by pre-synaptic voltage spikes. On a system scale, a reflex in a peripheral nervous system is mimicked by mounting the BioSyns on various substrates such as rigid glass, flexible polyethylene naphthalate, and stretchable poly(styrene-ethylene-butylene-styrene) for a decentralized processing unit. Finally, a classification accuracy of 90.6% is achieved through semi-empirical simulations of MNIST pattern recognition, incorporating the measured LTSP characteristics from the BioSyns.

Vaccination and the risk of post-acute sequelae after COVID-19 in the Omicron-predominant period.

OBJECTIVES: To assess the association of primary and third doses of vaccination with the risk of post-acute sequelae of COVID-19. METHODS: This retrospective cohort study utilized a combined database of nationwide health care claims data, COVID-19 patient registry, and vaccination records from South Korea. Individuals diagnosed with COVID-19 in the Omicron variant-dominant period of January-March 2022 were tracked for 30-120 days post-infection. The exposure of interest was the receipt of primary and third doses of the SARS-CoV-2 vaccine. The occurrence of 26 specific conditions in eight domains was compared using Cox regression with inverse probability of treatment weighting. RESULTS: This study included 394 773 unvaccinated individuals and 7 604 081 individuals receiving ≥2 doses of vaccine. Compared with unvaccinated individuals, vaccination with at least two doses was associated with a reduced risk (adjusted hazard ratio; 95% CI) of several conditions, including ischaemic heart disease (0.73; 0.57-0.94), heart failure (0.55; 0.48-0.63), cardiac dysrhythmia (0.72; 0.61-0.85), cardiac arrest (0.41; 0.33-0.51), pulmonary embolism (0.66; 0.52-0.84), venous thromboembolism (0.54; 0.44-0.66), acute renal failure (0.56; 0.46-0.67), new dialysis (0.45; 0.34-0.59), chronic obstructive pulmonary disease (0.74; 0.65-0.84), acute pancreatitis (0.64; 0.51-0.80), and diabetes (0.82; 0.71-0.95). The risks of heart failure, cardiac dysrhythmias, cardiac arrest, pulmonary embolism, and new dialysis were lower in those who were vaccinated with three doses compared with those who were vaccinated with two doses. DISCUSSION: Vaccination was associated with a decreased risk of post-acute sequelae of COVID-19, suggesting its potential role in mitigating the indirect impacts of COVID-19.

Prediction of effectiveness of universal rotavirus vaccination in Southwestern Vietnam based on a dynamic mathematical model.

Vaccinating young children against rotavirus (RV) is a promising preventive strategy against rotavirus gastroenteritis (RVGE). We evaluated the relative risk reduction of RVGE induced by universal vaccination in Vietnam through dynamic model analysis. We developed an age-stratified dynamic Vaccinated-Susceptible-Infectious-Recovered-Susceptible model to analyze RV transmission and assess vaccine effectiveness (VE). We assumed 3 different vaccine efficacies: 55%, 70%, and 85%. For model calibration, we used a database of patients under 5 years of age admitted to Ho Chi Minh No.1 Hospital with RVGE between January 2013 and December 2018. Assuming a vaccination rate of 95%, the number of RVGE hospitalizations after 5 years from universal RV vaccination decreased from 92,502 cases to 45,626 with 85% efficacy, to 54,576 cases with 70% efficacy, and to 63,209 cases with 55% efficacy. Additionally, RVGE hospitalizations after 10 years decreased from 177,950 to 89,517 with 85% efficacy and to 121,832 cases with 55% efficacy. The relative risk reductions of RVGE after 10 years were 49.7% with 85% efficacy, 40.6% with 70% efficacy, and 31.5% with 55% efficacy. The VE was 1.10 times (95% CI, 1.01-1.22) higher in the 4-months to 1-year-old age group than in the other age groups (P = 0.038), when applying 85% efficacy with 95% coverage. In conclusion, despite its relatively lower efficacy compared to high-income countries, RV vaccination remains an effective intervention in Southwestern Vietnam. In particular, implementing universal RV vaccination with higher coverage would result in a decrease in RVGE hospitalizations among Vietnamese children under 5 years of age.

Comparative analysis of flexural strength of 3D printed and milled 4Y-TZP and 3Y-TZP zirconia.

STATEMENT OF PROBLEM: The mechanical properties of 3 dimensionally (3D) printed zirconia have been reported to be comparable with those of milled zirconia, except for the flexural strength. However, most previous studies tested 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP), making it necessary to study 3D printed zirconia with 4 mol% yttria content (4Y-TZP). PURPOSE: The purpose of this in vitro study was to compare the flexural strength of 3D printed 4Y-TZP with 3Y-TZP materials and milled 4Y-TZP. MATERIAL AND METHODS: A total of 80 disk specimens (Ø15×1.5 mm) were fabricated and divided into 4 groups (n=20) using the fabrication method and yttria content: milled 3Y-TZP (Katana HT; Kuraray Noritake), 3D printed 3Y-TZP (TZ-3Y-E; Tosoh), milled 4Y-TZP (Katana STML; Kuraray Noritake), and 3D printed 4Y-TZP (3DMAT; Genoss). The biaxial flexural strength was determined with a piston-on-3-ball test (n=15). The flexural strength of each specimen was measured, and the Weibull modulus (m) and characteristic strength (σ0) were estimated from the fracture load distribution. Two intact and fractured specimens were examined with scanning electron microscopy (SEM). The crystalline phase of the specimens in each group was identified through X-ray diffraction (XRD) analysis (n=5). A 1-way ANOVA was used to compare the flexural strength among different groups. Subsequently, pairwise comparisons were conducted with the Tukey post hoc method (α=.05). RESULTS: The flexural strength of 3D printed 4Y-TZP was significantly higher than that of milled 4Y-TZP (P<.001). In contrast, the flexural strength of 3D printed 3Y-TZP was significantly lower than that of milled 3Y-TZP (P<.001). X-ray diffraction (XRD) analysis revealed that the tetragonal phase was the dominant phase in all groups, with the identification of some cubic phase peaks. CONCLUSIONS: Three dimensionally printed 4Y-TZP showed significantly higher flexural strength than milled 4Y-TZP and exhibited a clinically acceptable flexural strength exceeding 800 MPa.

Prediction of Intracranial Atherosclerotic Disease-Related Large-Vessel Occlusion Stroke on the Basis of Novel Cerebral Blood Volume Parameters.

BACKGROUND: Mechanical thrombectomy is an effective treatment method for large-vessel occlusion stroke (LVOS); however, it has limited efficacy for intracranial atherosclerotic disease (ICAD)-related LVOS. We investigated the use of cerebral blood volume (CBV) maps for identifying ICAD as the underlying cause of LVOS before the initiation of endovascular treatment (EVT). METHODS AND RESULTS: We reviewed clinical and imaging data from patients who presented with LVOS and underwent endovascular treatment between January 2011 and May 2021. The CBV patterns were analyzed to identify an increase in CBV within the hypoperfused area and estimate infarct patterns within the area of decreased CBV. Comparisons were made between the patients with an increase in CBV and those without, and among the estimated infarct patterns: territorial, cortical wedge, basal ganglia-only, subcortical, and normal CBV. Overall, 243 patients were included. CBV increase in the hypoperfused area was observed in 23.5% of patients. A significantly higher proportion of ICAD was observed in those with increased CBV than in those without (56.4% versus 19.8%; P<0.001). Regarding the estimated infarct patterns on the CBV, ICAD was most frequently observed in the normal CBV group (territorial, 14.9%; cortical wedge, 10.0%; basal ganglia-only, 43.8%; subcortical, 35.7%; normal, 61.7%). CBV parameters, including "an increase in CBV," "normal CBV infarct pattern," and "an increase in CBV or normal CBV infarct pattern composite," were independently associated with ICAD. CONCLUSIONS: An increased CBV or normal CBV pattern may be associated with ICAD LVOS on the pretreatment perfusion imaging.