RESUMEN
The demand for energy continues to increase as the global economy continues to grow. The role of oilfield chemicals in the process of oil and gas exploration, development, and production is becoming more and more important, and the demand is rising year by year. The support of national policies and the formulation of environmental protection regulations have put forward higher requirements for oilfield chemical products, which has promoted the innovative research and development and market application of oilfield chemicals. Polyformaldehyde glycol ether polymer (PGEP) is simple to synthesize, easily biodegradable, green and environmentally friendly, and in line with the development trend of chemicals used in oil and gas development. The interfacial tension performance of PGEP after compounding with different surfactants can reach as low as 0.00034 mN/m, which meets the requirements of the oilfield (interfacial tension ≤ 5 × 10-3 mN/m). The best oil washing efficiency performance of PGEP compounded with different surfactants reached 78.2%, which meets the requirements of the oilfield (oil washing efficiency ≥ 40%). The fracturing fluid drainage efficiency of PGEP after compounding with different surfactants reaches 22%, which meets the requirements of the oilfield (drainage efficiency ≥ 15%). The surface interfacial tension of the system remains constant after the concentration exceeds 0.2% and decreases with lower concentrations. The drainage efficiency increases with increasing concentrations in the range below 0.6%. It was determined that PGEP can be used as a surfactant instead of fatty-alcohol ethoxylates (FAE) in oilfield development.
RESUMEN
In this paper, a low-temperature thick oil demulsifier with high polarity was prepared by introducing ethylene oxide, propylene oxide block, and butylene oxide using m-diphenol as a starting agent. The main reasons for the difficulty involved in the low-temperature emulsification of extractive fluids were explained by analyzing the synthetic influencing factors and infrared spectra of the star comb polymer (PR-D2) and by analyzing the four fractions, interfacial energies, and zeta potentials of crude oils from the Chun and Gao fields. The effects of PR-D2 surfactant on the emulsification performance of crude oil recovery fluids were investigated via indoor and field experiments. The experimental results indicate that the optimal synthesis conditions for this emulsion breaker are as follows: a quality ratio of ionic reaction intermediates and meso-diphenol of R = 10:1; 1 g of the initiator; a polymerization temperature of 80 °C; and a reaction time of 8 h. Colloidal asphaltenes in the crude oil were the main factor hindering the low-temperature demulsification of the Gao oilfield's extractive fluids, and the reason for the demulsification difficulty of the extractive fluids in the Chun oilfield is that the temperature of demulsification is lower than the wax precipitation point. The demulsification rate of the Chun oilfield's extractive fluids reached more than 98% when the PR-D2 concentration reached 150 mg/L at 43 °C. The demulsification rate of the Gao oilfield's extractive fluids reached more than 98% at a PR-D2 concentration of 150 mg/L at 65 °C. The field experiments show that the Chun oilfield's extractive fluids can still demulsify after the temperature is reduced to 43 °C in winter. The emulsification temperature of the Gao oilfield's extractive fluids was reduced from 73 °C to 68 °C, with an excellent demulsification effect.
RESUMEN
Focusing on the problem of poor demulsification performance of light crude oil emulsions in low-permeability oilfields at low temperatures, the composition of the emulsion samples, clay particle size distribution, and the viscosity-temperature relationship curve of samples were analyzed. Based on the results of emulsion composition analysis and characteristics, the bottle test method was used to analyze the demulsifying effect of different commercial types of demulsifiers, revealing the demulsification mechanism. The field tests confirm the demulsification capabilities of Polyoxyethylene polyoxypropylene quaternized polyoxyolefins surfactants (PR demulsifiers). The results reveal that PR demulsifiers combine the features of decreasing the interfacial tension between oil and water and adsorbing SiO2, allowing for quick demulsification and flocculation at low temperatures. This research serves as a theoretical and practical foundation for the study and advancement of low-temperature demulsification technology in oilfields.
RESUMEN
BACKGROUND: MicroRNAs (miRNAs) have been identified to play a role in the development and progression of lung cancer (LC). As of now, the expression and function of miR-370 in LC are still under investigation. Accordingly, this study explores the role and mechanism of miR-370 in LC. METHODS: MiR-370 mimics or inhibitors were used to transfect A549 and NCI-H460 cells to overexpress or inhibit miR-370. The colony formation test and Cell Counting Kit-8 were conducted to detect the cell proliferation activity, and transwell test and wound healing test were conducted to evaluate the cell invasion and migration activities. In addition, the downstream target genes of miR-370 in LC were verified by dual luciferase reporter assay and western blot. RESULTS: Compared to normal tissues and cell lineslines, the miR-370 expression in LC tissues and cells was decreased greatly. Compared to the negative control group, the up-regulation of miR-370 greatly intensified the apoptosis of NCI-H460 cells and weakened the migration, proliferation, and invasion of the cells. However, compared to the inhibitor-negative control group, the downregulation of miR-370 caused the opposite results. Additionally, SMAD family member 1 (SMAD1) was identified as a direct target of miR-370 in LC and could be inhibited by miR-370. Its overexpression restored the impact of miR-370 mimics on LC cells. CONCLUSION: With low expression in LC tissues and cell lineslines, miR-370 is a tumor suppressor that weakens the growth, invasion as well as migration of LC cells by inhibiting SMAD1 expression. Our results may provide novel insights for the biological treatment of LC.
RESUMEN
Background: Lung cancer is one of leading causes of human health threatening with approximately 2.09 million initially diagnosed cases and 1.76 million deaths worldwide annually. Pyroptosis is a programmed cell death mediated by Gasdermin family proteins. Pyroptosis could suppress the tumor oncogenesis and progression; nevertheless, pyroptosis could promote tumor growth by forming a suitable microenvironment. Methods: LASSO Cox regression analysis was performed to construct prognostic pyroptosis-related gene (PRG) signature. A ceRNA was constructed to explore the potential lncRNA-miRNA-mRNA regulatory axis in LUSC. Results: The expression of 26 PRGs were increased or decreased in LUSC. We also summarized simple nucleotide variation and copy number variation landscape of PRGs in LUSC. Prognosis analysis suggested a poor overall survival rate in LUSC patients with high expression of IL6, IL1B, ELANE, and CASP6. A pyroptosis-related prognostic signature was developed based on four prognostic PRGs. High-risk score LUSC patients had a poor overall survival rate versus low-risk score patients with an AUC of 0.565, 0.641, and 0.619 in 1-year, 3-year, and 5-year ROC curves, respectively. Moreover, the risk score was correlated with immune infiltration in LUSC. Further analysis revealed that pyroptosis-related prognostic signature was correlated with immune cell infiltration, tumor mutation burden, microsatellite instability, and drug sensitivity. We also constructed a ceRNA network and identified a lncRNA KCNQ1OT1/miR-328-3p/IL1B regulatory axis for LUSC. Conclusion: A bioinformatics method was performed to develop a pyroptosis-related prognostic signature containing four genes (IL6, IL1B, ELANE, and CASP4) in LUSC. We also constructed a ceRNA network and identified a lncRNA KCNQ1OT1/miR-328-3p/IL1B regulatory axis for LUSC. Further in vivo and in vitro studies should be conducted to verify these results.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Carcinoma de Células Escamosas , Neoplasias Pulmonares , MicroARNs , ARN Largo no Codificante , Carcinoma de Pulmón de Células no Pequeñas/genética , Carcinoma de Células Escamosas/patología , Variaciones en el Número de Copia de ADN , Regulación Neoplásica de la Expresión Génica , Humanos , Interleucina-6/metabolismo , Pulmón/patología , Neoplasias Pulmonares/patología , MicroARNs/genética , Pronóstico , Piroptosis/genética , ARN Largo no Codificante/genética , ARN Largo no Codificante/metabolismo , Microambiente TumoralRESUMEN
Background: The present study aimed to explore the correlation between calcium-activated potassium channels, left atrial flow field mechanics, valvular atrial fibrillation (VAF), and thrombosis. The process of transforming mechanical signals into biological signals has been revealed, which offers new insights into the study of VAF. Methods: Computational fluid dynamics simulations use numeric analysis and algorithms to compute flow parameters, including turbulent shear stress (TSS) and wall pressure in the left atrium (LA). Real-time PCR and western blotting were used to detect the mRNA and protein expression of IKCa2.3/3.1, ATK1, and P300 in the left atrial tissue of 90 patients. Results: In the valvular disease group, the TSS and wall ressure in the LA increased, the wall pressure increased in turn in all disease groups, mainly near the mitral valve and the posterior portion of the LA, the increase in TSS was the most significant in each group near the mitral valve, and the middle and lower part of the back of the LA and the mRNA expression and protein expression levels of IKCa2.3/3.1, AKT1, and P300 increased (p < 0.05) (n = 15). The present study was preliminarily conducted to elucidate whether there might be a certain correlation between IKCa2.3 and LA hemodynamic changes. Conclusions: The TSS and wall pressure changes in the LA are correlated with the upregulation of mRNA and protein expression of IKCa2.3/3.1, AKT1, and P300.
Asunto(s)
Fibrilación Atrial , Canales de Potasio Calcio-Activados , Fibrilación Atrial/metabolismo , Atrios Cardíacos/metabolismo , Hemodinámica , Humanos , ARN Mensajero/genéticaRESUMEN
With the purpose of reducing stray radiation dose (SRD) in out-of-field region (OFR) during radiotherapy with 6 MV intensity-modulated radiation therapy (IMRT), a body-shielding device (BSD) was prepared according to the measurements obtained in experimental testing. In experimental testing, optimal shielding conditions, such as 1 mm lead, 2 mm lead, and 1 mm lead plus 10 mm bolus, were investigated along the medial axis of a phantom using thermoluminescent dosimeters (TLDs). The SRDs at distances from field edge were then measured and analyzed for a clinical IMRT treatment plan for nasopharyngeal carcinoma before and after shielding using the BSD. In addition, SRDs in anterior, posterior, left and right directions of phantom were investigated with and without shielding, respectively. Also, the SRD at the bottom of treatment couch was measured. SRD decreased exponentially to a constant value with increasing distance from field edge. The shielding rate was 50%-80%; however, there were no significant differences in SRDs when shielded by 1 mm lead, 2 mm lead, or 1 mm lead plus 10 mm bolus (P>0.05). Importantly, the 10 mm bolus absorbed back-scattering radiation due to the interaction between photons and lead. As a result, 1 mm lead plus 10 mm bolus was selected to prepare the BSD. After shielding with BSD, total SRDs in the OFR decreased to almost 50% of those without shielding when irradiated with IMRT beams. Due to the effects of treatment couch and gantry angle, SRDs at distances were not identical in anterior, posterior, left and right direction of phantom without BSD. As higher dose in anterior and lower dose in posterior, SRDs were substantial similarities after shielding. There was no significant difference in SRDs for left and right directions with or without shielding. Interestingly, SRDs in the four directions were similar after shielding. From these results, the BSD developed in this study may significantly reduce SRD in the OFR during radiotherapy, thus decreasing the risk of secondary cancers.
Asunto(s)
Carcinoma/radioterapia , Neoplasias Nasofaríngeas/radioterapia , Fantasmas de Imagen , Protección Radiológica/instrumentación , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia Conformacional/métodos , Humanos , Carcinoma Nasofaríngeo , Fotones , Dosificación Radioterapéutica , Dispersión de Radiación , Dosimetría TermoluminiscenteRESUMEN
Owing to the outstanding properties of thermal conduction, lightweight, and chemical durability, carbon nanotubes (CNTs) have revealed promising applications in thermal management materials. Meanwhile, the increasingly popular portable electronics and the rapid development of space technology need lighter weight, smaller size, and more effective thermal management devices. Here, a novel kind of heat dissipation devices based on the superaligned CNT films and underlying microchannels is proposed, and the heat dissipation properties are measured at the natural condition. Distinctive from previous studies, by combining the advantages of microchannels and CNTs, such a novel heat dissipation device enables superior natural convection heat transfer properties. Our findings prove that the novel CNT-based devices could show an 86.6% larger total natural heat dissipation properties than bare copper plate. Further calculations of the radiation and natural convection heat transfer properties demonstrate that the excellent passive cooling properties of these CNT-based devices are primarily caused by the reinforcement of the natural convection heat transfer properties. Furthermore, the heat dissipation mechanisms are briefly discussed, and we propose that the very high heat transfer coefficients and the porous structures of superaligned CNT films play critical roles in reinforcing the natural convection. The novel CNT-based heat dissipation devices also have advantages of energy-saving, free-noise, and without additional accessories. So we believe that the CNT-based heat dissipation devices would replace the traditional metal-finned heat dissipation devices and have promising applications in electronic devices, such as photovoltaic devices, portable electronic devices, and electronic displays.
RESUMEN
The aim of the present study was to investigate the role of CTVision in interfractional setup errors during intensity-modulated radiation therapy (IMRT) in 12 nasopharyngeal carcinoma (NPC) patients. The trend of setup errors as a function of time during a fractionated radiotherapy course was investigated, and the influence of reconstructive thickness on image reconstruction for setup errors was analyzed. The appropriate planning target volume (PTV) margin and planning risk volume (PRV) margin were defined to provide a reference for the design of IMRT for NPC. Based on CTVision, online CT was performed weekly for each patient. Setup errors were measured by registration between the CT reconstructed image and reference image. Mean of setup errors, estimated population systematic (Σ), and population random (σ) errors were calculated using SPSS (v15.0). Optimum PTV and PRV margins were calculated. In the clinical data, for the LR (left-right), SI (superior-inferior), and AP (anterior-posterior) directions, Σ was 0.8, 0.8, and 1.0 mm, respectively, and σ was 1.0, 1.3, and 0.8 mm, respectively. In the LR, SI, and AP directions, PTV margins were at least 2.7, 2.9, and 3.0 mm, respectively, and PRV margins were at least 1.5, 1.7, and 1.7 mm, respectively. No significant differences in setup errors were observed during the fractionated radiotherapy course (p > 0.05). However, CT image reconstruction with different thicknesses affected the accuracy of measurements for setup errors, particularly in the SI direction. The application of CTVision to correct setup errors is important and can provide reasonable margins to guarantee the coverage of PTVs and spare organs at risk. A thickness of 3 mm in the reconstructed image is appropriate for the measurement of setup errors by image registration.
Asunto(s)
Neoplasias Nasofaríngeas/diagnóstico por imagen , Neoplasias Nasofaríngeas/radioterapia , Planificación de la Radioterapia Asistida por Computador/métodos , Errores de Configuración en Radioterapia , Radioterapia Guiada por Imagen/métodos , Tomografía Computarizada por Rayos X/métodos , Adulto , Humanos , Procesamiento de Imagen Asistido por Computador , Metástasis Linfática , Persona de Mediana Edad , Neoplasias Nasofaríngeas/secundario , Dosificación Radioterapéutica , Radioterapia de Intensidad Modulada/métodosRESUMEN
For a heat flux modulator, the most difficult problem is that the main carriers named 'phonons' have little response to external fields. Of the existing studies on heat flux modulators, most were theoretical work and the materials systems for the theoretical calculations were artificial lattices. In this paper, we made a heat modulator with ultrathin buckypaper which was made of multi-layer carbon nanotube sheets overlapped together, and achieved an on/off ratio whose value was 1.41 using an pendent block in experiments without special optimizations. When the temperatures of the two sides were of appropriate values, we could even see a negative heat flux. Intuitively, the heat flux was tuned by the gap between the buckypaper and the pendent gate, and we observed that there was heat transferred to the pendent block. The structure of the modulator is similar to a CNT transistor with a contactless gate, hence this type of micromodulator will be easy to manufacture in the future.
RESUMEN
In this work, we report our studies related to the natural-convective heat transfer properties of carbon nanotube (CNT) sheets. We theoretically derived the formulas and experimentally measured the natural-convective heat transfer coefficients (H) via electrical heating method. The H values of the CNT sheets containing different layers (1, 2, 3, and 1000) were measured. We found that the single-layer CNT sheet had a unique ability on heat dissipation because of its great H. The H value of the single-layer CNT sheet was 69 W/(m(2) K) which was about twice of aluminum foil in the same environment. As the layers increased, the H values dropped quickly to the same with that of aluminum foil. We also discussed its roles on thermal dissipation, and the results indicated that the convection was a significant way of dissipation when the CNT sheets were applied on macroscales. These results may give us a new guideline to design devices based on the CNT sheets.