Poly(vinylidene fluoride) (PVDF)-based solid electrolytes with a Li salt-polymer-little residual solvent configuration are promising candidates for solid-state batteries. Herein, we clarify the microstructure of PVDF-based composite electrolyte at the atomic level and demonstrate that the Li+-interaction environment determines both interfacial stability and ion-transport capability. The polymer works as a "solid diluent" and the filler realizes a uniform solvent distribution. We propose a universal strategy of constructing a weak-interaction environment by replacing the conventional N,N-dimethylformamide (DMF) solvent with the designed 2,2,2-trifluoroacetamide (TFA). The lower Li+ binding energy of TFA forms abundant aggregates to generate inorganic-rich interphases for interfacial compatibility. The weaker interactions of TFA with PVDF and filler achieve high ionic conductivity (7.0 × 10-4 S cm-1) of the electrolyte. The solid-state Li||LiNi0.8Co0.1Mn0.1O2 cells stably cycle 4900 and 3000 times with cutoff voltages of 4.3 and 4.5 V, respectively, as well as deliver superior stability at -20 to 45 °C and a high energy density of 300 Wh kg-1 in pouch cells.
Surface modification is an effective approach for overcoming the interfacial degradations to enable high electrochemical performance of battery materials, yet it is still challenging to realize high-quality surface modification with simple processing, low cost, and mass production. Herein, a thermal-induced surface precipitation phenomenon is reported in a Ti-dopped LiCoO2 , which can realize an ultrathin (≈5 nm) and uniform surface modification by a simple annealing process. It is revealed that surface Li-deficiency enables bulk Ti to precipitate and segregate on the non-(003) surface facets, forming a Ti-enriched disordered layered structure. Such a surface modification layer can not only stabilize the interfacial chemistry but also significantly improve the charge/discharge reaction kinetics, leading to much-improved cycling stability and rate capability. Dopants surface precipitation is a unique outward diffusion process, which differs from the current surface modification techniques and further diversifies these approaches for realizing high-quality surface modification of battery materials.
Single-atom catalysts (SACs) have attracted tremendous research interests in various energy-related fields because of their high activity, selectivity and 100% atom utilization. However, it is still a challenge to enhance the intrinsic and specific activity of SACs. Herein, we present an approach to fabricate a high surface distribution density of iridium (Ir) SAC on nickel-iron sulfide nanosheet arrays substrate (Ir1/NFS), which delivers a high water oxidation activity. The Ir1/NFS catalyst offers a low overpotential of ~170 mV at a current density of 10 mA cm-2 and a high turnover frequency of 9.85 s-1 at an overpotential of 300 mV in 1.0 M KOH solution. At the same time, the Ir1/NFS catalyst exhibits a high stability performance, reaching a lifespan up to 350 hours at a current density of 100 mA cm-2. First-principles calculations reveal that the electronic structures of Ir atoms are significantly regulated by the sulfide substrate, endowing an energetically favorable reaction pathway. This work represents a promising strategy to fabricate high surface distribution density single-atom catalysts with high activity and durability for electrochemical water splitting.
The development of silicon-based anode materials is important for improving the energy density of current lithium ion batteries. However, there are still strong demands for these materials with better cycle stability and higher reversible capacity. Here, a kind of dual bond restricted MXene-Si-CNT composite anode materials with enhanced electrochemical performance is reported. These dual bonds have been clearly revealed by an X-ray photoelectron spectroscopy technique and also proven by theoretical calculations with spontaneous reaction energy values (-0.190 and -0.429 eV/atom for Ti-Si and C-Si bonds, respectively). The cycle stability of the composites, prepared by a facile ball-milling synthetic method, can obviously be improved because of the existence of these dual bonds and the multidimensional constructed architecture. The MXene-Si-CNT composite with 60 wt % silicon possesses the best overall performance, with â¼80% capacity retention after 200 cycles, and achieves 841 mAh g-1 at 2 A g-1. This approach demonstrates a promising strategy to exploit high-performance anode materials and lessens the immanent negative effect of silicon-based materials. Furthermore, it is significant to extend this method to other anode materials with serious volumetric change problems during the cycling process.
The mechanism research of structure-related reactions on Li2MnO3 is important to enhance the electrochemical performance of lithium-manganese-rich layered oxides. Although there are some reports on the structure evolution of Li2MnO3 during cycling process, the employed research techniques are very limited, mainly in/ex-situ X-ray diffraction, X-ray absorption and transmission electron microscopy. Here, atomic pair distribution function, a method to study the local atomic arrangement on the basis of average spectroscopic information, is used for the first time to study the local structure evolution of Li2MnO3 during electrochemical charge/discharge cycles. The results clearly demonstrate that Mn3+/Mn4+ redox couple is activated and Mn ions are reduced during discharging process. Some Mn ions in Mn layers can significantly migrate to Li layers and occupy the octahedral sites. As a result, a portion of inserted Li ions can occupy the face-shared tetrahedronsites, accompanied by the formation of local spinel-like structure. This work provides an important and suitable method based on the average spectroscopic information to investigate the local structure of electrode materials of lithium-ion batteries as well as other advanced battery systems.
Electrochemically driven functioning of a battery inevitably induces thermal and mechanical effects, which in turn couple with the electrochemical effect and collectively govern the performance of the battery. However, such a coupling effect, whether favorable or detrimental, has never been explicitly elucidated. Here we use in situ transmission electron microscopy to demonstrate such a coupling effect. We discover that thermally perturbating delithiated LiNi0.6Mn0.2Co0.2O2 will trigger explosive nucleation and propagation of intragranular cracks in the lattice, providing us a unique opportunity to directly visualize the cracking mechanism and dynamics. We reveal that thermal stress associated with electrochemically induced phase inhomogeneity and internal pressure resulting from oxygen release are the primary driving forces for intragranular cracking that resembles a "popcorn" fracture mechanism. The present work reveals that, for battery performance, the intricate coupling of electrochemical, thermal, and mechanical effects will surpass the superposition of individual effects.
Mixing is the driver for the energy footprint of water resource recovery in lagoons. With the availability of solar-powered equipment, one potential measure to decrease the environmental impacts of treatment is to transition to an off-the-grid treatment. We studied the comparative scenarios of an existing grid-powered mixer and a solar-powered mixer. Testing was conducted to monitor the water quality, and to guarantee that the effluent concentrations were maintained equally between the two scenarios. Meanwhile, the energy consumption was recorded with the electrical energy monitor by the wastewater treatment utility, and the carbon emission changes were calculated using the emission intensity of the power utility. The results show that after the replacement, both energy usage and energy costs were significantly reduced, with the energy usage having decreased by 70% and its cost by 47%. Additionally, carbon-equivalent emission from electricity importation dropped by 64%, with an effect on the overall carbon emissions (i.e., including all other contributions from the process) decreasing from 3.8% to 1.5%.
Carbon Footprint , Solar Energy , Carbon , Electricity
