The electrochemical nitrate reduction reaction (NO3RR) holds promise for converting nitrogenous pollutants to valuable ammonia products. However, conventional electrocatalysis faces challenges in effectively driving the complex eight-electron and nine-proton transfer process of the NO3RR while also competing with the hydrogen evolution reaction. In this study, we present the thermally enhanced electrocatalysis of nitrate-to-ammonia conversion over nickel-modified copper oxide single-atom alloy oxide nanowires. The catalyst demonstrates improved ammonia production performance with a Faradaic efficiency of approximately 80% and a yield rate of 9.7 mg h-1 cm-2 at +0.1 V versus a reversible hydrogen electrode at elevated cell temperatures. In addition, this thermally enhanced electrocatalysis system displays impressive stability, interference resistance, and favorable energy consumption and greenhouse gas emissions for the simulated industrial wastewater treatment. Complementary in situ analyses confirm that the significantly superior relay of active hydrogen species formed at Ni sites facilitates the thermal-field-coupled electrocatalysis of Cu surface-adsorbed *NOx hydrogenation. Theoretical calculations further support the thermodynamic and kinetic feasibility of the relay catalysis mechanism for the NO3RR over the Ni1Cu model catalyst. This study introduces a conceptual thermal-electrochemistry approach for the synergistic regulation of complex catalytic processes, highlighting the potential of multifield-coupled catalysis to advance sustainable-energy-powered chemical synthesis technologies.
Single-atom catalysts (SACs), specifically iron single atoms dispersed on nitrogen-doped carbon (Fe-NC), have shown promising potential in the electrocatalytic reduction of nitrate to ammonia (NitRR), but there is a lack of understanding of their intrinsic activity. The conventional measurements often overlook the intrinsic performance of SACs, leading to significant underestimation. This study presents an in situ electrochemical probing protocol, using two poisoning molecules (SCN- and NO2-), to characterize the reactivity of Fe sites in Fe-NC SACs for NitRR. The technique aids in quantifying the yield rate of ammonia on Fe sites and the active site number. The findings reveal the intrinsic turnover frequency (TOF) based on the number and ammonia yield rate of Fe sites, challenging the current understanding of SACs' inherent performances. This unique approach holds considerable potential for determining the intrinsic activity of other SACs in complex reactions, opening new avenues for the exploration of electrocatalytic processes.
The selective two-electron electrochemical oxygen reduction reaction (ORR) for hydrogen peroxide (H2O2) production is a promising and green alternative method to the current energy-intensive anthraquinone process used in industry. In this study, we develop a single-atom catalyst (CNT-D-O-Fe) by anchoring defect-stabilized and oxygen-coordinated iron atomic sites (Fe-O4) onto porous carbon nanotubes using a local etching strategy. Compared to O-doped CNTs with vacancy defects (CNT-D-O) and oxygen-coordinated Fe single-atom site modifying CNTs without a porous structure (CNT-O-Fe), CNT-D-O-Fe exhibits the highest H2O2 selectivity of 94.4% with a kinetic current density of 13.4 mA cm-2. Fe-O4 single-atom sites in the catalyst probably contribute to the intrinsic reactivity for the two-electron transfer process while vacancy defects greatly enhance the electrocatalytic stability. Theoretical calculations further support that the coordinated environment and defective moiety in CNT-D-O-Fe could efficiently optimize the adsorption strength of the *OOH intermediate over the Fe single atomic active sites. This contribution sheds light on the potential of defect-stabilized and oxygen-coordinated single-atom metal sites as a promising avenue for the rational design of highly efficient and selective catalysts towards various electrocatalytic reactions.
Despite modern chemistry's success in providing affordable fertilizers for feeding the population and supporting the ammonia industry, ineffective nitrogen management has led to pollution of water resources and air, contributing to climate change. Here, we report a multifunctional copper single-atom electrocatalyst-based aerogel (Cu SAA) that integrates the multiscale structure of coordinated single-atomic sites and 3D channel frameworks. The Cu SAA demonstrates an impressive faradaic efficiency of 87% for NH3 synthesis, as well as remarkable sensing performance with detection limits of 0.15 ppm for NO3- and 1.19 ppm for NH4+. These multifunctional features enable precise control and conversion of nitrate to ammonia in the catalytic process, facilitating accurate regulation of the ammonium and nitrate ratios in fertilizers. We thus designed the Cu SAA into a smart and sustainable fertilizing system (SSFS), a prototype device for on-site automatic recycling of nutrients with precisely controlled nitrate/ammonium concentrations. The SSFS represents a forward step toward sustainable nutrient/waste recycling, thus permitting efficient nitrogen utilization of crops and mitigating pollutant emissions. This contribution exemplifies how electrocatalysis and nanotechnology can be potentially leveraged to enable sustainable agriculture.
Harvesting recyclable ammonia (NH3) from the electrocatalytic reduction of nitrate (NO3RR) offers a sustainable strategy to close the ecological nitrogen cycle from nitration contamination in an energy-efficient and environmentally friendly manner. The emerging intermetallic single-atom alloys (ISAAs) are recognized to achieve the highest site density of single atoms by isolating contiguous metal atoms into single sites stabilized by another metal within the intermetallic structure, which holds promise to couple the catalytic benefits from intermetallic nanocrystals and single-atom catalysts for promoting NO3RR. Herein, ISAA In-Pd bimetallene, in which the Pd single atoms are isolated by surrounding In atoms, is reported to boost neutral NO3RR with a NH3 Faradaic efficiency (FE) of 87.2%, a yield rate of 28.06 mg h-1 mgPd-1, and an exceptional electrocatalytic stability with increased activity/selectivity over 100 h and 20 cycles. The ISAA structure induces substantially diminished overlap of Pd d-orbitals and narrowed p-d hybridization of In-p and Pd-d states around the Fermi level, resulting in a stronger NO3- adsorption and a depressed energy barrier of the potential-determining step for NO3RR. Further integrating the NO3RR catalyst into a Zn-NO3- flow battery as the cathode delivers a power density of 12.64 mW cm-2 and a FE of 93.4% for NH3 production.
Anthropogenic nitrate pollution has an adverse impact on the environment and human health. As part of a sustainable nitrate management strategy, electrochemical denitrification is studied as an innovative strategy for nutrients recycling and recovering. It is, however, challenging to selectively electro-reduce nitrate with low-concentration for ammonia. Herein, the photo-deposition of size-defined Ru nanoclusters (NCs, average size: ≈1.66 nm) on TiO2 nanotubes (NTs) is demonstrated, which show improved performance for nitrate-to-ammonia electroreduction with a maximum yield rate of ≈600 µg h-1 cm-2 and a faradic efficiency (FE) of > 90.0% across a broad range of potentials in comparison with electrodeposited Ru nanoparticles (NPs, average size: ≈23.78 nm) on TiO2 NTs. Experimental and theoretical evidence further suggests the small-size Ru NCs with the intrinsically enhanced selectivity and activity because of the strong metal/substrate interaction and unsaturated coordination state. The findings highlight the size effect on Ru-based catalyst supported on metal oxides, a versatile catalytic model, which allows the regulation of hydrogen adsorption to favor ammonia production over the competing hydrogen evolution reaction.
The real-time measurement of the individual or local electrocatalytic reactivity of catalyst particles instead of ensemble behavior is considerably challenging but very critical to uncover fundamental insights into catalytic mechanisms. Recent remarkable efforts have been made to the development of high-spatiotemporal-resolution electrochemical techniques, which allow the imaging of the topography and reactivity of fast electron-transfer processes at the nanoscale. This Perspective summarizes emerging powerful electrochemical measurement techniques for studying various electrocatalytic reactions on different types of catalysts. Principles of scanning electrochemical microscopy, scanning electrochemical cell microscopy, single-entity measurement, and molecular probing technique have been discussed for the purpose of measuring important parameters in electrocatalysis. We further demonstrate recent advances in these techniques that reveal quantitative information about the thermodynamic and kinetic properties of catalysts for various electrocatalytic reactions associated with our perspectives. Future research on the next-generation electrochemical techniques is anticipated to be focused on the development of instrumentation, correlative multimodal techniques, and new applications, thus enabling new opportunities for elucidating structure-reactivity relationships and dynamic information at the single active-site level.
Electroreduction of nitrate to ammonia offers a promising pathway for nutrient recycling and recovery from wastewater with energy and environmental sustainability. There have been considerable efforts on the regulation of reaction pathways to facilitate nitrate-to-ammonia conversion over the competing hydrogen evolution reaction but only with limited success. Here, we report a Cu single-atom gel (Cu SAG) electrocatalyst that produces NH3 from both nitrate and nitrite under neutral conditions. Given the unique mechanism of NO2- activation on Cu SAGs with spatial confinement and strengthened kinetics, a pulse electrolysis strategy is presented to cascade the accumulation and conversion of NO2- intermediates during NO3- reduction with the prohibited competition from the hydrogen evolution reaction, thus substantially enhancing the Faradaic efficiency and the yield rate for ammonia production compared with constant potential electrolysis. This work underlines the cooperative approach of the pulse electrolysis and SAGs with three-dimensional (3D) framework structures for highly efficient nitrate-to-ammonia conversion enabled by tandem catalysis of unfavorable intermediates.
As an emerging class of materials with distinctive physicochemical properties, metallenes are deemed as efficient catalysts for energy-related electrocatalytic reactions. Engineering the lattice strain, electronic structure, crystallinity, and even surface porosity of metallene provides a great opportunity to further enhance its catalytic performance. Herein, we rationally developed a reconstruction strategy of Pd metallenes at atomic scale to generate a series of nonmetallic atom-intercalated Pd metallenes (M-Pdene, M = H, N, C) with lattice expansion and S-doped Pd metallene (S-Pdene) with an amorphous structure. Catalytic performance evaluation demonstrated that N-Pdene exhibited the highest mass activities of 7.96 A mg-1, which was 10.6 and 8.5 time greater than those of commercial Pd/C and Pt/C, respectively, for methanol oxidation reaction (MOR). Density functional theory calculations suggested that the well-controlled lattice tensile strain as well as the strong p-d hybridization interaction between N and Pd resulted in enhanced OH adsorption and weakened CO adsorption for efficient MOR catalysis on N-Pdene. When tested as hydrogen evolution reaction (HER) catalysts, the amorphous S-Pdene delivered superior activity and durability relative to the crystalline counterparts because of the disordered Pd surface with a further elongated bond length and a downshifted d-band center. This work provides an effective strategy for atomic engineering of metallene nanomaterials with high performance as electrocatalysts.
We report a wire-shaped bifunctional oxygen photoelectrode by integrating Li-doped TiO2 nanotubes and Pt nanoclusters. Conductive nanoshells have been identified at the lithiated interface of Pt/TiO2, which facilitates the performance of oxygen catalysis. Thus, the assembled Zn-air micro-battery with solar-assisted charging greatly improves the voltage efficiency compared with the conventional state-of-the-art catalyst as the air electrode.
After decades of development, protein and peptide drugs have now grown into a major drug class in the marketplace. Target identification and validation are crucial for the discovery of protein and peptide drugs, and bioinformatics prediction of targets based on the characteristics of known target proteins will help improve the efficiency and success rate of target selection. However, owing to the developmental history in the pharmaceutical industry, previous systematic exploration of the target spaces has mainly focused on traditional small-molecule drugs, while studies related to protein and peptide drugs are lacking. Here, we systematically explore the target spaces in the human genome specifically for protein and peptide drugs. Compared with other proteins, both successful protein and peptide drug targets have many special characteristics, and are also significantly different from those of small-molecule drugs in many aspects. Based on these features, we develop separate effective genome-wide target prediction models for protein and peptide drugs. Finally, a user-friendly web server, Predictor Of Protein and PeptIde drugs' therapeutic Targets (POPPIT) (http://poppit.ncpsb.org.cn/), is established, which provides not only target prediction specifically for protein and peptide drugs but also abundant annotations for predicted targets.
Genome, Human , Proteins , Humans , Proteins/genetics , Proteins/chemistry , Peptides/genetics , Peptides/pharmacology , Internet
Single-atom catalysts (SACs) have aroused tremendous interest over the past decade, particularly in the community of energy and environment-related electrocatalysis. A rapidly growing number of recent publications have recognized it as a promising candidate with maximum atomic utilization, distinct activity, and selectivity in comparison to bulk catalysts and nanocatalysts. However, the complexity of localized coordination environments and the dispersion of isolated sites lead to significant difficulties when it comes to gaining insight into the intrinsic behavior of electrocatalytic reactions. Furthermore, the low metal loadings of most SACs make conventional ensemble measurements less likely to be accurate on the subnanoscale. Thus, it remains challenging to probe the activity and properties of individual atomic sites by available commercial instruments and analytical methods. In spite of this, continuing efforts have lately focused on the development of advanced measurement methodologies, which are very useful to the fundamental understanding of SACs. There have recently been a number of in situ/operando techniques applied to SACs, such as electron microscopy, spectroscopy, and other analysis methods, which support relevant functions to identify the active sites and reaction intermediates and to investigate the dynamic behavior of localized structures of the catalytic sites.This Account aims to present recent electrochemical probing techniques which can be used to identify single-atomic catalytic sites within solid supports. First, we describe the basic principles of molecular probe methods for the study and analysis of electrocatalytic site behavior. In particular, the in situ probing technique enabled by surface interrogation scanning electrochemical microscopy (SI-SECM) can measure the active site density and kinetic rate with high resolution. An alternative electrochemical probing technique is further demonstrated on the basis of single-entity electrochemistry, which allows the unique electrochemical imaging of the size and catalytic rate of single atoms, molecules, and clusters. The merits and limitations of different electrochemical techniques are then discussed, along with perspectives for future prospects. Apart from this, we further showcase the powerful capability of emerging electrochemical probing techniques for determining significant effects and properties of SACs for various electrocatalytic reactions, including oxygen reduction and evolution, hydrogen evolution, and nitrate reduction. Overall, electrochemical techniques with atomic resolution have greatly increased opportunities for observing, measuring, and understanding the surface and interface chemistry during energy conversion. In the future, it is anticipated that the development of electrochemical probing techniques will be advanced with innovative perspectives on the behavior and features of SACs. We hope that this Account can contribute in several ways to promoting the fundamental knowledge and technical progress of emerging electrochemical measurements for studying SACs.
Electrochemical Techniques , Hydrogen , Catalysis , Electrochemical Techniques/methods , Kinetics , Metals/chemistry
Ammonia (NH3) is an essential ingredient in agriculture and a promising source of clean energy as a hydrogen carrier. The current major method for ammonia production, however, is the Haber-Bosch process that leads to massive energy consumption and severe environmental issues. Compared with nitrogen (N2) reduction, electrochemical nitrate reduction reaction (NO3RR), with a higher NH3 yield rate and Faradaic efficiency, holds promise for efficient NH3 production under ambient conditions. To achieve efficient NO3RR, electrocatalysts should exhibit high selectivity and Faradaic efficiency with a high NH3 yield rate. In this work, we developed two-dimensional (2D) iron-based cyano-coordination polymer nanosheets (Fe-cyano NSs) following in situ electrochemical treatment for high-rate NO3RR. Owing to the strong adsorption of nitrate on Fe0 active sites generated via topotactic conversion and in situ electroreduction, 2D Fe-cyano electrocatalyst exhibits high catalytic activity with a yield rate of 42.1 mg h-1 mgcat-1 and a Faradaic efficiency of over 90% toward NH3 production at -0.5 V (vs reversible hydrogen electrode, RHE). Further electrochemical characterizations revealed that superhydrophilic surface and enhanced electrochemical surface area of the 2D porous nanostructures also contributed to the high-rate NO3RR activity. An electrolyzer toward NO3RR and oxygen evolution reaction (OER) in a two-electrode configuration is constructed based on 2D Fe-cyano, achieving an energy efficiency of 26.2%. This work provides an alternative methodology toward topotactic conversion of transition metal nanosheets for NO3RR and reveals the often-overlooked contribution of hydrophilicity of the catalysts for high-rate electrocatalysis.
Aqueous Ni/Fe alkaline batteries with features of low cost and high safety show great potential for application in portable and wearable electronics. However, the poor kinetics of the Fe-based anode greatly limits the large-scale applications of Ni/Fe batteries. Herein, we report an interconnected 3D conductive network with carbon-coated nanostructured iron/iron oxide (3D-Fe/Fe2O3@C) as an efficient anode for a flexible Ni/Fe battery. A hydrogel precursor is used to molecularly link and confine Fe3+ to spatial networks, resulting in a uniform dispersion of Fe/Fe2O3-heterostructured nanoparticles. Theoretical investigations reveal regulated potential loss and improved delocalized carrier density as a result of carbon coating and the mixed metal/metal oxide structure. In addition to these merits, due to the regulated wettability and electroactive surface areas, the 3D-Fe/Fe2O3@C anode with a high mass loading delivers an extraordinary areal capacity of 3.07 mA h cm-2, as well as the boosted rate capability and Coulombic efficiency. When coupled with the NiCo2O4 cathode, the flexible quasi-solid-state Ni/Fe battery exhibits an admirable energy density of 15.53 mW h cm-3 and a maximum power density of 761.91 W h cm-3. The good stability after 20,000 cycles and severe mechanical deformations of the as-fabricated Ni/Fe battery imply it as a promising flexible energy storage device for practical applications.
OBJECTIVE: B7-H3 is a member of the B7 family of immune checkpoint molecule. Although B7-H3 has been shown to regulate T cell-mediated peripheral immune response, whether it also correlated with NK cell exhaustion in ovarian cancer remains unclear. The purpose of this study was to explore the mechanism of B7-H3 regulating NK-cell proliferation and function. MATERIAL AND METHODS: To investigate the relationship between B7-H3 expression and the NK-cell function in ovarian cancer, human ovarian tumor tissues and cell lines were first examined the protein and mRNA expression of B7-H3 by quantitative real-time PCR (qRT-PCR), Immunohistochemistry and Western-blot assays. Then we established B7-H3 knockout cell lines and measured the cytotoxicity of NK cells on these cells by LDH release assay and Flow Cytometry. In addition, we analyzed B7-H3 in the regulation of glycolysis and glycolysis-related proteins by Glycolysis Stress Test, Glucose Consumption Assay and Western-blot. Moreover, luciferase reporter assay was used to confirm the directly regulation of miR-29c to B7-H3. Finally, we carried out in vivo experiments. RESULTS: We observed that tumor-expressed B7-H3 inhibits NK-cell function in vitro and in vivo, and is associated with glycolysis of ovarian cancer cell. Therapeutically, B7-H3 blockade prolonged the survival of SKOV3 tumor-bearing mice. In addition, miR-29c improved the anti-tumor efficacy of NK-cell by directly targeting B7-H3 in vitro were observed, but not in vivo. CONCLUSION: Our results demonstrate that miR-29c downregulates B7-H3 to inhibit NK-cell exhaustion and associated with glycolysis, which suggest that NK cells may be a new target of anti-B7-H3 therapy in ovarian cancer patients.
B7 Antigens/immunology , Carcinoma, Ovarian Epithelial/immunology , Killer Cells, Natural/immunology , Ovarian Neoplasms/immunology , Animals , B7 Antigens/biosynthesis , B7 Antigens/genetics , Carcinoma, Ovarian Epithelial/genetics , Cell Line, Tumor , Down-Regulation , Female , Heterografts , Humans , Immunohistochemistry , Mice , Mice, Inbred NOD , Mice, SCID , MicroRNAs/genetics , MicroRNAs/immunology , Middle Aged , Ovarian Neoplasms/genetics
Surface interrogation scanning electrochemical microscopy (SI-SECM) of two electrodeposited manganese-based electrocatalysts, amorphous MnOx and perovskite CaMnO3 , was used to investigate the manganese oxidation state relating to the oxygen evolution reaction (OER) under neutral conditions. The results indicate the amounts of MnIII and MnIV species in MnOx and CaMnO3 depend on potential. A MnV species was identified in both structures during the OER. Time-delay titration of MnV further revealed that MnOx produced two types of active sites with different OER reaction rates: k'fast (MnOx )=1.21â s-1 and k'slow (MnOx )=0.24â s-1 . In contrast, CaMnO3 perovskites in which the MnV species formed at a less positive potential than that in MnOx , displayed only one kinetic behavior with a faster reaction rate of 1.72â s-1 .
Endometriosis (EMs) is defined as the presence of tissue which somewhat resembles endometrial glands and stroma outside the uterus, and elicits fibrosis. Fibrosis is the main factor resulting in pain and infertility, while the aetiology of endometrial fibrosis is unknown. There is strong evidence from numerous experiments showing that connective tissue growth factor (CCN2) plays a central role in fibrogenesis. Exosomal miR-214-3p can regulate the expression of CCN2 through binding to complementary sites in the 3' untranslated region. This study aimed to explore the role of exosomal miR-214-3p in endometriosis fibrosis and the relationship between CCN2 and miR-214-3p in endometriosis fibrosis. Our results demonstrated that miR-214-3p was significantly down-regulated and CCN2 was up-regulated in EMs ectopic lesion and stromal cells compared with EMs eutopic and endometrium of patients without endometriosis. Exosomal miR-214-3p can inhibit fibrosis in EMs through targeting CCN2. The results were explored and verified in vitro and in vivo, respectively. Cell co-culture was used to explore the contributions of exosomes to intercellular information transmission of miR-214-3p. The results showed that exosomes play a pivotal role in the transportation of miR-214-3p between cells. Furthermore, level of exosomal miR-214-3p in endometriosis patients' serum was lower than that in patients without endometriosis. In conclusion, exosomal miR-214-3p can inhibit fibrosis in EMs by targeting CCN2. MiR-214-3p may be considered as a bio-marker and has a potential therapeutic effect in EMs.
Connective Tissue Growth Factor/metabolism , Endometriosis/metabolism , Endometrium/metabolism , Exosomes/metabolism , MicroRNAs/metabolism , Stromal Cells/metabolism , Animals , Case-Control Studies , Cells, Cultured , Connective Tissue Growth Factor/genetics , Disease Models, Animal , Endometriosis/genetics , Endometriosis/pathology , Endometrium/pathology , Exosomes/genetics , Exosomes/pathology , Female , Fibrosis , Gene Expression Regulation , Humans , Mice, Inbred BALB C , MicroRNAs/genetics , Signal Transduction , Stromal Cells/pathology
Bacteria alter their local chemical environment through both consumption and the production of a variety of molecules, ultimately shaping the local ecology. Molecular oxygen (O2) is a key metabolite that affects the physiology and behavior of virtually all bacteria, and its consumption often results in O2 gradients within sessile bacterial communities (biofilms). O2 plays a critical role in several bacterial phenotypes, including antibiotic tolerance; however, our understanding of O2 levels within and surrounding biofilms has been hampered by the difficulties in measuring O2 levels in real-time for extended durations and at the micron scale. Here, we developed electrochemical methodology based on scanning electrochemical microscopy to quantify the O2 gradients present above a Pseudomonas aeruginosa biofilm. These results reveal that a biofilm produces a hypoxic zone that extends hundreds of microns from the biofilm surface within minutes and that the biofilm consumes O2 at a maximum rate. Treating the biofilm with levels of the antibiotic ciprofloxacin that kill 99% of the bacteria did not affect the O2 gradient, indicating that the biofilm is highly resilient to antimicrobial treatment in regard to O2 consumption.IMPORTANCE O2 is a fundamental environmental metabolite that affects all life on earth. While toxic to many microbes and obligately required by others, those that have appropriate physiological responses survive and can even benefit from various levels of O2, particularly in biofilm communities. Although most studies have focused on measuring O2 within biofilms, little is known about O2 gradients surrounding biofilms. Here, we developed electrochemical methodology based on scanning electrochemical microscopy to measure the O2 gradients surrounding biofilms in real time on the micron scale. Our results reveal that P. aeruginosa biofilms produce a hypoxic zone that can extend hundreds of microns from the biofilm surface and that this gradient remains even after the addition of antibiotic concentrations that eradicated 99% of viable cells. Our results provide a high resolution of the O2 gradients produced by P. aeruginosa biofilms and reveal sustained O2 consumption in the presence of antibiotics.
Biofilms/growth & development , Oxygen/analysis , Pseudomonas aeruginosa/physiology , Anaerobiosis , Anti-Bacterial Agents/pharmacology , Ciprofloxacin/pharmacology , Electrochemical Techniques , Pseudomonas aeruginosa/drug effects
A surface-strained and geometry-optimized TiO2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti3+ sites, demonstrating a more favorable pathway for the N2 activation and selective NH3 production with a faster kinetic rate than the pristine TiO2 . The TiO2 -based nanoreactor with surface and bulk structure tailoring delivered an NH3 yield rate up to 5.50â µg h-1 cm-2 (16.67â µg h-1 mgcat -1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.
