RESUMEN
BACKGROUND:Patients with degenerative cervical spondylosis often suffer from changed varicosity of the cervical spine,unbalanced neck-shoulder muscular strength,and descending power. OBJECTIVE:To probe into the correlation between sagittal curvature parameters and pain threshold for neck-shoulder muscles in degenerative cervical spondylosis. METHODS:Totally 50 patients with degenerative cervical spondylosis received treatment at the 3D Printed Outpatient Center of Shanghai Ninth People's Hospital,Shanghai Jiao Tong University School of Medicine from January 2022 to March 2023 were included in the study.After excluding the 10 patients of cervical lateral projection that failed to meet the measurement conditions,the cervical lateral projections were shot to measure the following iconography parameters:Borden value and C2-7 Cobb angle as well as pain thresholds on the midpoint of the superior trapezius muscle in bilateral bundles and at 1 cm beside the C5-6 interspike.The correlation between sagittal curvature parameters and pain threshold of neck-shoulder muscles in degenerative cervical spondylosis was analyzed. RESULTS AND CONCLUSION:(1)The Borden value of sagittal curvature showed a moderately positive correlation with the bundle pain threshold in the left upper trapezius muscle,the bundle pain threshold in the right upper trapezius muscle,and the pain threshold at the 1 cm of the left side beside the C5-6 interspike(r=0.498,P<0.01;r=0.448,P<0.05;r=0.405,P<0.05)and a weak positive correlation with the pain threshold at the 1 cm of the right side beside the C5-6 interspike(r=0.322,P<0.05).(2)The C2-7 Cobb angle showed a weak positive correlation with the left squared myalgia threshold(r=0.355,P<0.05),and there was no correlation with the pain threshold of the left trapezius muscle and the pain threshold at the 1 cm of both sides beside the C5-6 interspike.(3)There was a correlation between the pain threshold of the neck-shoulder muscles,and a high correlation between the pain threshold of the left and right muscles and the pain threshold within the left and right side muscles,indicating that the neck-shoulder muscles are consistent and may be related to the coordination of the neck-shoulder movements.
RESUMEN
BACKGROUND:Short-term wearing of cervical brace combined with shoulder and neck muscle exercise can significantly improve the symptoms of early cervical spondylosis.After stopping wearing cervical brace,patients'symptoms are easy to recur,which may be due to the lack of cervical curvature correction function. OBJECTIVE:To analyze the effect of 3D printed personalized cervical orthopedic brace for adjusting cervical curvature in the treatment of early cervical spondylosis. METHODS:From January 2021 to January 2023,30 patients with early cervical spondylosis in the Shanghai Fifth People's Hospital,Fudan University were studied,including 11 males and 19 females,with a mean age of(31.7±6.6)years old.All patients customized and wore 3D printed personalized cervical orthopedic braces for 3 hours a day for continuous 12 weeks.Borden value of cervical curvature,pain threshold of shoulder and neck muscles,cervical dysfunction index,and visual analog scale score in 30 patients were recorded before and 4 and 8 weeks after treatment. RESULTS AND CONCLUSION:(1)Compared with before treatment,the difference of Borden value of cervical curvature,right trapezius tenderness threshold,and cervical dysfunction index was not significant in 30 patients after 4 weeks of treatment(P>0.05).Visual analog scale score,left trapezius tenderness threshold,left and right C5C6 tenderness threshold were significantly improved(P<0.05).(2)Compared with before treatment,the cervical curvature Borden value,left and right trapezius tenderness threshold,visual analog scale score,left and right C5C6 tenderness threshold,and cervical dysfunction index of 30 patients were significantly improved after 12 weeks of treatment(P<0.05).(3)Compared with 4 weeks after treatment,the Borden value of cervical curvature,right trapezius tenderness threshold,visual analog scale score,left and right C5C6 tenderness threshold and cervical dysfunction index of 30 patients after 12 weeks of treatment were significantly improved(P<0.05).(4)The results show that short-term wearing of 3D printed personalized cervical orthopedic brace can improve the pain of patients with early cervical spondylosis,while long-term application has certain effect on the recovery of cervical curvature.
RESUMEN
BACKGROUND:Traditional scoliosis orthosis has some disadvantages,such as complex manufacturing process,long processing cycle,poor fit and so on.Three-dimensional printed scoliosis orthosis has the advantages of high manufacturing precision and personalization. OBJECTIVE:To evaluate the efficacy of three-dimensional printed scoliosis orthosis for scoliosis based on multi-criteria decision model. METHODS:Clinical data of 72 patients with scoliosis admitted to Chen Xinghai Hospital of Integrated Traditional Chinese and Western Medicine from January 2019 to October 2022 were retrospectively collected and divided into two groups according to the treatment of orthosis.Study group(n=23)received three-dimensional printed scoliosis orthosis.Traditional group(n=49)received the traditional polypropylene spine brace treatment.The clinical efficacy and complications were compared between the two groups.A multi-criteria decision model for the treatment of scoliosis with three-dimensional printed scoliosis orthosis was established,and the stability of the benefit value,risk value and decision model of the two groups were evaluated. RESULTS AND CONCLUSION:(1)Compared with the traditional group,there were significant differences in the top vertebral offset distance,Cobb angle,top vertebral rotation,Functional Movement Screen score,visual analog scale score and total effective rate in the study group at 6 months after surgery(P<0.05).(2)Among the benefit indexes,Cobb angle had the greatest impact on the condition of patients,while the risk indexes had the greatest impact on dyspnea.(3)The benefit values of the study group and the traditional group for scoliosis were 79 and 64,and the risk values were 74 and 57,respectively.The combined benefit and risk values found that the benefit-risk value of the study group was 16 higher than that of the traditional group.(4)In the range of 0-100%relative risk weight,the benefit-risk value of the study group was always higher than that of the traditional group,which proved that the multi-criteria decision-making model had good stability.(5)It is indicated that three-dimensional printed scoliosis orthosis can better restore the physiological curvature of scoliosis and improve the efficiency of treatment.
RESUMEN
BACKGROUND:Red light therapy has the non-invasive and cost-effective characteristics,and is widely used in various acute and chronic pains in clinic.However,currently,the phototherapy equipment used in clinic is expensive and has certain site limitations,so it is necessary to explore more convenient and economical phototherapy applications. OBJECTIVE:To observe the clinical efficacy of a self-developed photon cervical vertebra massage instrument for chronic neck pain. METHODS:From November 2022 to February 2023,24 patients with chronic neck pain were recruited from the Department of Rehabilitation Medicine,Ninth People's Hospital Affiliated to Shanghai Jiao Tong University School of Medicine,including 18 females and 6 males,with a mean age of(29.67±6.40)years.The body mass index was(21.39±3.52)kg/m2.Photon cervical vertebra massage instrument was used twice a day for 20 minutes each time for four weeks.The changes in visual analog scale score,pressure pain threshold,neck active activity,neck disability index,and Pittsburgh sleep quality index were observed before,after 2 and 4 weeks of treatment. RESULTS AND CONCLUSION:(1)Compared with before treatment,after four weeks of treatment,visual analog scale score,pressure pain threshold,neck disability index,and Pittsburgh sleep quality index were all improved(P<0.05),while some cervical motion(extension,left and right rotation)improved(P<0.05)after 4 weeks of treatment.(2)Bilateral visual analog scale scores,left trapezius muscle pressure pain threshold,C5C6 pressure pain threshold,and neck disability index improved after 2 weeks of treatment(P<0.05).(3)It is indicated that the application of photon cervical vertebra massage instrument can improve the pain score,muscle tenderness,sleep quality,functional level,and partial active activity of patients with chronic neck pain in a short period,and is a convenient,effective,and safe treatment method.
RESUMEN
BACKGROUND:The study of the lumbar spine and pelvis in patients with Lenke type 5 lordosis is limited to the coronal and sagittal planes,and the three-dimensional relationship between the scoliosis and the pelvis has not yet been clarified. OBJECTIVE:To analyze the effect of lumbar scoliosis on the pelvis in patients with Lenke type 5 lordosis and to study the correlation between the lumbar spine and the three-dimensional spatial position of the pelvis. METHODS:Imaging data of 60 patients with Lenke type 5 lordosis scoliosis admitted to the 3D Printing Reception Center of Shanghai Ninth People's Hospital,Shanghai Jiao Tong University School of Medicine from January 2019 to September 2023 were retrospectively analyzed,including Cobb angle,coronal pelvic tilt,lumbar lordosis,left and right pelvic hip width ratio(sacroiliac-anterior superior iliac spine),spinal rotation angle,pelvic tilt,sacral slope,pelvic incidence,coronal deformity angular ratio,sagittal deformity angular ratio,C7 plumb line-center sacral vertical line,apical vertebral translation,and coronal sacral inclination.The information was summarized as a database.SPSS 22.0 software was used to analyze the data related to the lumbar spine and pelvis of the patients with Lenke type 5 primary lumbar curvature adolescent idiopathic scoliosis using Spearman's correlation analysis and linear regression. RESULTS AND CONCLUSION:(1)Cobb angle was highly positively correlated with coronal deformity angular ratio,apical vertebral translation,and spinal rotation angle(r=0.91,r=0.841,r=0.736).(2)Coronal deformity angular ratio was highly positively correlated with apical vertebral translation(r=0.737),moderately positively correlated with C7 plumb line-center sacral vertical line(r=0.514),and moderately negatively correlated with sagittal deformity angular ratio(r=-0.595).(3)There was a high positive correlation between lumbar lordosis and sagittal deformity angular ratio(r=0.942)and a moderate negative correlation with coronal deformity angular ratio(r=-0.554).(4)There was a moderate positive correlation between Cobb angle with coronal pelvic tilt and coronal sacral inclination(r=0.522,r=0.534)and a moderate positive correlation between C7 plumb line-center sacral vertical line and coronal pelvic tilt(r=0.507).Apical vertebral translation with coronal pelvic tilt and coronal sacral inclination showed a moderate positive correlation(r=0.507,r=0.506).Lumbar lordosis with sacral slope and pelvic incidence showed a moderate positive correlation(r=0.512,r=0.538).Sagittal deformity angular ratio was moderately positively correlated with sacral slope and pelvic incidence(r=0.614,r=0.621).(5)Studies have found that the relative position of the lumbar spine and the pelvis is closely related in the horizontal,sagittal and coronal planes.When the lumbar spine affects scoliosis and is rotated,the relative position of the pelvis will also change to compensate,which indicates that while correcting scoliosis,the correction of the pelvis cannot be ignored.
RESUMEN
Periarticular fracture of the shoulder is a common type of fractures in the elderly. Postoperative adverse events such as internal fixation failure, humeral head ischemic necrosis and upper limb dysfunction occur frequently, which seriously endangers the exercise and health of the elderly. Compared with the fracture with normal bone mass, the osteoporotic periarticular fracture of the shoulder is complicated with slow healing and poor rehabilitation, so the clinical management becomes more difficult. At present, there is no targeted guideline or consensus for this type of fracture in China. In such context, experts from Youth Osteoporosis Group of Chinese Orthopedic Association, Orthopedic Expert Committee of Geriatrics Branch of Chinese Association of Gerontology and Geriatrics, Osteoporosis Group of Youth Committee of Chinese Association of Orthopedic Surgeons and Osteoporosis Committee of Shanghai Association of Chinese Integrative Medicine developed the Chinese expert consensus on the diagnosis and treatment of osteoporotic periarticular fracture of the shoulder in the elderly ( version 2023). Nine recommendations were put forward from the aspects of diagnosis, treatment strategies and rehabilitation of osteoporotic periarticular fracture of the shoulder, hoping to promote the standardized, systematic and personalized diagnosis and treatment concept and improve functional outcomes and quality of life in elderly patients with osteoporotic periarticular fracture of the shoulder.
RESUMEN
ObjectiveTo investigate the in-brace and short-term correction of 3D-printed scoliosis orthoses. MethodsFrom July to December 2021, 36 patients with adolescent idiopathic scoliosis from Ninth People's Hospital, Shanghai Jiaotong University School of Medicine were selected to complete full-length radiographs of the spine before and immediately after wearing the orthosis. They wore the orthosis more than 20 hours a day, and took radiographs six months later. Cobb angle was calculated. They were assessed with Chinese version of the Scoliosis Research Society's outcomes instrument 22 (SRS-22) before wearing and six months follow-up. ResultsThe mean Cobb angle was (22.10±6.29)° before wearing, and it was (7.85±10.90)° immediately after wearing (t = 4.775, P < 0.01) and (14.33±0.74)° six months follow-up (t = 4.189, P < 0.01). The score of functional status of SRS-22 increased six months follow-up (Z = -2.676, P < 0.01). The Cobb angle immediately after wearing correlated with the Cobb angle six months follow-up (r = 0.826, P < 0.05). Conclusion3D-printed scoliosis orthoses can correct the scoliosis satisfactorily, in-brace and in short-term.
RESUMEN
ObjectiveTo review the classification of orthopedic insoles, common techniques of 3D printing orthopedic insoles, common materials and their application for flatfoot. MethodsLiteratures were retrieved from PubMed, Web of Science, CNKI and Wanfang Data from 2012 to 2022, and the relevant contents were summarized. ResultsA total of ten studies were finally included, from 5 countries, involving 290 participants, which published from 2019 to 2022. Orthotic insoles were classified as prefabricated, semi-custom, and custom, while custom ones were classified as traditional custom and 3D printed custom. 3D printed orthotic insoles were often made with selective laser sintering, fused deposition modeling (FDM) and PolyJet printing technologies, and commonly used materials included ethylene-vinyl acetate (EVA), polylactic acid, thermoplastic polyurethane, polyamide, and polypropylene. For flatfoot, 3D printed orthotic insoles could improve plantar pressure, relieve foot pain and the combined use of insole posting could control rearfoot valgus. Conclusion3D printed custom insoles can be made more efficiently and accurately than traditional custom insoles. The printing technologies and materials often chosen for 3D printed orthotic insoles are mainly FDM and EVA. 3D printed orthotic insoles is effective on plantar pressure, comfort and foot movement function of flatfoot.
RESUMEN
Three-dimensional (3D) bioprinting is an emerging research direction in bio-manufacturing, a landmark in the shift from traditional manufacturing to high-end manufacturing. It integrates manufacturing science, biomedicine, information technology, and material science. In situ bioprinting is a type of 3D bioprinting which aims to print tissues or organs directly on defective sites in the human body. Printed materials can grow and proliferate in the human body; therefore, the graft is similar to the target tissues or organs and could accurately match the defective site. This article mainly summarizes the current status of robotic applications in the medical field and reviews its research progress in in situ 3D bioprinting.
RESUMEN
Objective To study topological structure of a new type of three-dimensional (3D) printed height increasing insoles for leg length discrepancy (LLD) and its effect on biomechanics of lower limbs. Methods Topological structure for middle and rear part of the insole was optimized by solid isotropic microstructures with penalization (SIMP), the force was loaded and the boundary conditions were set according to force area of the insole, and the height increasing insole with thermoplastic polyurethanes (TPU) materials was printed by selected laser sintering (SLS). The insoles were used in 9 patients with LLD, visual analogue scale (VAS) and Maryland foot function scores were used to compare pain and foot function changes of patients before and after using the insole, and the 3D gait analysis system was used to compare spatiotemporal parameters and vertical ground reaction force (vGRF) of both lower limbs. Result sAfter the patient wore 3D printed insole, VAS scores decreased, Maryland foot function scores increased, vGRF of both lower limbs decreased, and the difference of cadence, stance phase and swing phase in both lower limbs decreased. Conclusions The 3D printed height increasing insole after topology optimization can improve coordination of lower limb movement, reduce ground impact, relieve pain and improve foot function, thus providing an effective personalized orthopedic plan for LLD treatment in clinic.
RESUMEN
With developing economy and improving living standards, more and more sports injuries occur, particularly articular cartilage wear. Once cartilage is injured, its self-repair ability is much weak because it lacks nerve, lymphatic duct, or blood supply. Compared with traditional 3D printing, biological 3D printing can realize a high density loading of various seed cells in different spatial distributions and construction of complex active microenvironments. In treatment of bone and cartilage defects, 3D bioprinting can not only make up for a limited source of autogenous cartilage and bone but also solve problems in personalized shaping and insufficiency of biological activity of artificial cartilage and bone. This paper summarizes the latest research progress in China and abroad, concerning current common 3D bioprinters with different printing principles, biological seed cells and bio-inks. We especially introduce the bio-inks for cartilage tissue engineering, the fused deposition forming (FDM) techniques and biological tissue bioreactors in cartilage tissue engineering. We also foresee their development and future research trends in 3D bioprinting in cartilage, hoping our information may help the research in cartilage tissue engineering and its clinical translation.
RESUMEN
Objective To investigate the feasibility of an accuracy evaluation method for 3D reconstructed bone model based on 3D reconstruction software Arigin3D Pro.Methods Pig femurs were used as solid models which were scanned by CT and MRI respectively.The scan data were imported into software Arigin3D Pro for 3D model reconstruction by 3 operators with different reconstruction experience (≤1 year,2 to 3 years,and ≥4 years,respectively).Each operator reconstructed the femurs 3 times and in each reconstruction measured the diameter of the femoral head,the length of the femur and the width of the knee joint at the distal end of the femur 3 times respectively using software Geomagic Wrap.The above parameters of the solid models were measured using a vernier caliper.The parameter values of reconstructed models and solid models were compared and the differences were analyzed.Results The measurements by Geomagic Wrap showed deviations between the CT and MRI reconstruction models and the solid models,and the maximum deviation percentages were 1.47％ and 1.08％,respectively.The percentages of intra-operater difference ranged from 0.29％ to 1.53％;the 3D models reconstructed by operators with different reconstruction experience were not identical.Conclusions It is a feasible accuracy evaluation method to compare key parameters between the 3D bone model reconstructed by software Arigin3D Pro and the real animal bone.The deviations of 3D reconstructed bone model based on CT and MR1 images are acceptable.The accuracy of 3D bone construction is related to the difference in operators.
RESUMEN
Objective@#To investigate the feasibility of an accuracy evaluation method for 3D reconstructed bone model based on 3D reconstruction software Arigin3D Pro.@*Methods@#Pig femurs were used as solid models which were scanned by CT and MRI respectively. The scan data were imported into software Arigin3D Pro for 3D model reconstruction by 3 operators with different reconstruction experience (≤1 year, 2 to 3 years, and ≥4 years, respectively). Each operator reconstructed the femurs 3 times and in each reconstruction measured the diameter of the femoral head, the length of the femur and the width of the knee joint at the distal end of the femur 3 times respectively using software Geomagic Wrap. The above parameters of the solid models were measured using a vernier caliper. The parameter values of reconstructed models and solid models were compared and the differences were analyzed.@*Results@#The measurements by Geomagic Wrap showed deviations between the CT and MRI reconstruction models and the solid models, and the maximum deviation percentages were 1.47% and 1.08%, respectively. The percentages of intra-operater difference ranged from 0.29% to 1.53%; the 3D models reconstructed by operators with different reconstruction experience were not identical.@*Conclusions@#It is a feasible accuracy evaluation method to compare key parameters between the 3D bone model reconstructed by software Arigin3D Pro and the real animal bone. The deviations of 3D reconstructed bone model based on CT and MRI images are acceptable. The accuracy of 3D bone construction is related to the difference in operators.
RESUMEN
Objective@#To evaluate effect of screening of esophageal cancer though comparing difference of survival level between screening and non-screening patients in Linzhou city.@*Methods@#The records pathologically diagnosed as serious hyperplasia/carcinoma and esophageal cancer were drawn from database of first round screening in Linzhou city from 2005-2013 and were assigned to the screening group. The records of new esophageal cancer cases which diagnosed within 2 years before, screening from the same village aged from 40 to 69, were drawn from database of cancer registry in Linzhou city and were assigned to the non-screening group. Five or 10 year survival rate with 95%CI of patients with different malignant degree diseases in the screening group and the patients with esophageal cancer in the non-screening group was calculated respectively. The survival curves between the screening and non-screening group were compared by Log rank method.@*Results@#All 26 908 persons were examined in first round screening in Linzhou city from 2005 to 2013. There were 374 persons with serious hyperplasia/carcinoma in situ, 157 persons with esophageal cancer (141 intramucosal carcinomas/submucosal cancers, 16 invasive cancers). The 5 year survival rate of serious hyperplasia/carcinoma, intramucosal carcinoma/submucosal cancer and invasive cancer were 95.0% (95%CI: 91.7%-97.0%) , 72.0% (95%CI: 62.7%-79.3%) and 41.7% (95%CI: 17.4%-64.6%) separately. The 5 year survival rate of esophageal cancer in screening and non-screening group were 68.7% (95%CI:59.9%-75.9%) and 40.8% (95%CI: 36.4%-45.2%). The 10 year survival rate of esophageal cancer in screening and non-screening group were 58.0% (95% CI: 44.6%-69.3%) and 34.3% (95% CI:29.1%-39.5%). The 5 or 10 year survival rate of esophageal cancer in the screening group were higher than that in the non-screening group in whatever sex or age. The survival distribution of the screening group was better than non-screening group (χ2=38.88, P<0.001).@*Conclusion@#More precancerous lesions and early esophageal cancer can be detected and patients' survival level was improved through organized esophageal cancer screening, which provided support to evaluate value of organized screening.
RESUMEN
Objective@#To explore the psychological status and related factors in patients with precancerous of esophageal and gastric cardia in Linzhou of Henan.@*Methods@#Clinical psycho-rating scale of Social Support Rating Scale (SSRS), Self-Rating Anxiety Scale (SAS, score ≥50 points with symptoms of anxiety) and Self-Rating Depression Scale (SDS, score ≥53 points with the symptoms of depression) were applied to survey life events and psychological status of subjects who aged 40-69 years old and participated in"The Early diagnosis and Early Treatment"program in Linzhou cancer hospital from July 2015 to Jan 2016. Patients with lower intraepithelial neoplasia or high-grade intraepithelial neoplasia were selected as precancerous lesions (n=118), and patients with normal grade were selected as healthy controls (n=210). Compare the differences of the scores between the two groups, and the logistic regression model was used to analyze the related factors of precancerous lesions and psychological status of the study subjects.@*Results@#Precancerous lesions included esophageal (72 cases), gastric cardia (40 cases), esophageal and cardia dual source (6 cases); Precancerous lesions and healthy controls aged (57.17±7.71) and (53.12±7.99) years old, the difference was statistically significant (P<0.001). The anxiety and depression scale showed that the scores of SAS and SDS scores in the precancerous lesions were (37.18±10.01), (40.44±8.37) points, and (34.02±6.63), (38.49±8.73) points in control group, the difference was statistically significant (P=0.002, 0.032). While the social support total score (38.26±5.26), and subjective support score (24.08±3.83) and objective support score (7.50±1.89) in control group were all higher than those of precancerous group (36.80±6.18, 23.01±3.93, 6.93±1.57), and the difference were statistically significant (P=0.024, 0.016, 0.004). In addition, the Logistic analysis showed that subjects with low objective social support, subjective social support and anxiety symptoms were more likely to develop precancerous lesions, and the OR were 0.81, 0.72 and 1.05, respectively (P=0.028, 0.005, 0.009).@*Conclusion@#Social support, anxiety and depression status may be related to the occurrence and development of esophageal and gastric cardia precancerous lesions.
RESUMEN
Objective To explore application of our self-designed U-shaped transdermal surgical navigator based on three-dimensional reverse design in cannulated screwing for femoral neck fracture Methods A retrospective study was done of 5 patients with femoral neck fracture who had been treated from August 2016 to March 2017.They were 3 men and 2 women,aged from 33 to 60 years (average,46.5 years).Thin layer CT scanning was conducted on the patients' affected hip (at the left side in 2 cases and at the right side in 3).Based on their CT data,3D design software and 3D printing technique were used to manufacture the U-shaped transdermal surgical navigator and a real-sized model of the fracture.Operations were simulated using the U-shaped transdermal surgical navigator on the fracture model to determine the angle,depth and location of the screwing.Fixation of the fracture with cannulated screws was conducted after confirmation of satisfactory surgical parameters.The postoperative X-ray films of the patients were reviewed.Evaluations were conducted of the screw position,operating time,volume of operative bleeding,and number of intraoperative X-ray shots.Results The screw positions in the 5 patients were consistent with their preoperative design.Four patients had only one shot of fluoroscopy and one patient 3 shots.Their operating time ranged from 15 to 30 minutes,averaging 22.5 minutes;their bleeding ranged from 5 to 10 mL,averaging 7.5 mL.The 5 patients were followed up for an average of 4.5 months (from 3 to 6 months).By the Harris scoring at their final follow-ups,one was excellent,3 good and one fair.No complications like pain,functional impairment of the joint,or collapse or necrosis of the femoral head occurred during the follow-up.Conclusions Our self-designed U-shaped transdermal surgical navigator based on three-dimensional reverse design can significandy improve the accuracy and safety of the cannulated screwing for femoral neck fractures.The operation is minimally invasive,reducing operating time and intraoperative blood loss.
RESUMEN
Objective To establish a finite element model of rotator cuff which can be used to simulate the rotator cuff injury and to evaluate the biomechanical effects of rotator cuff surgery.Methods The Dicom CT images of the right shoulder of a Chinese healthy volunteer were used to establish models of the scapula,humerus and clavicle.The rotator cuff structures were separated and modeled based on the MRI images and anatomical knowledge.After the rotator cuff model was introduced into the finite element analysis software Abaqus 6.12,the anatomical positions were simulated when the shoulder was at 30° internal rotation,30° external rotation,30° abduction,30° adduction,30° flexion and 30° extension.Results When the shoulder was in 30° flexion,the average stress was 52.2 kPa on the supraspinatus,223.0 kPa on the inffaspinatus and the teres minor,and 90.4 kPa on the subscapularis.When the shoulder was in 30° extension,the average stress was 105.0 kPa on the supraspinatus,78.2 kPa on the infraspinatus and the teres minor,and 55.7 kPa on the subscapularis,indicating that the muscle and tendon of the supraspinatus was subjected to greater stress and the humerus and the scapula produced less stress compared with the shoulder in 30° flexion.Conclusion Since our finite element model of the rotator cuff can simulate common activities of the shoulder joint and obtain stress values of the corresponding rotator cuff muscles,it can be used in simulation of rotator cuff injury and its surgery.
RESUMEN
Objective To establish a three-dimensional(3D) finite element model of cervical vertebrae (C1-7),and study its biomechanical properties under muscle force by cervical traction,so as to provide references for clinical treatment.Methods On the basis of nonlinear finite element model of normal cervical vertebrae and combined with clinical traction methods,cervical traction at the extension angle of 0°,10°,20°,30°,40° under the same traction weight,was simulated by finite element analysis (FEA) software to obtain and select the joint force and muscle force that were appropriate for FEA on the model.Results In the process of cervical extension by traction,under the muscle force,the average maximum equivalent stress of cervical vertebrae,intervertebral disc and uncovertebral joints increased by 4.86,1.79,0.69 MPa,respectively,and the average maximum relative displacement of cervical vertebrae in sagittal and vertical axis direction increased by 1 1.1,1.26 mm,respectively.The biomechanical properties of cervical traction were similar to the FEA results reported in the literature.Conclusions Neck muscles play an active role in promoting the stress and displacement of cervical vertebrae,intervertebral discs and uncovertebral joints and it should be taken into consideration when performing cervical traction in clinic.In addition,the traction angle should not be too large:0.-20. is generally recommended as a relatively safe angle range at the initial stage.
RESUMEN
<p><b>OBJECTIVE</b>To understand the distribution of esophageal squamous cell cancer and precursor lesions in high-risk areas of China, and to provide evidence for determining the reference ranges of detection rates in high-risk areas.</p><p><b>METHODS</b>Endoscopy with Lugol's iodine staining was performed on 15 709 local residents aged 40 to 69 years old in Linzhou of Henan province and Feicheng of Shandong province from 2005-2009. 35 cases without accurate pathology diagnosis and 11 cases with vital disease before screening were excluded. 15 663 subjects were enrolled in this study. Compliance was calculated by the percentage of the people who had endoscopic screening among the target population. Chi-square test and trend chi-square test were used to compare the distribution differences in age, gender and areas of esophageal squamous cell cancer and precancer. 95% CI of the detection rates was then employed to represent the reference ranges of esophageal squamous cell cancer and precursor lesions.</p><p><b>RESULTS</b>The compliance rate of screening endoscopy of this study was 49.36% (15 709/31 826) of all, and female's compliance (54.05%, 8 447/15 628) was much higher than that of male (44.83%, 7 262/16 198) (χ(2) = 88.14, P < 0.001). The detection rates of basal cell hyperplasia, low grade intraepithelial neoplasia, high grade intraepithelial neoplasia and esophageal squamous cell cancer of males were 4.17% (302/7 246), 17.22% (1 248/7 246), 1.67% (121/7 246), 0.83% (60/7 246), and were higher than that of females (3.45% (290/8 417), 14.82% (1 247/8 417), 1.41% (119/8 417), 0.48% (40/8 417), respectively). Except for high-grade intraepithelial neoplasia, the detection rates of male were higher than that of female (P values were 0.018, < 0.001, 0.960, 0.006). The detection rates of all grades of precursor lesions increased with age rising (all P values < 0.001), among which the detection rates of the mentioned four lesions for 40-44 years old were 2.69% (94/3 500), 8.11% (284/3 500), 0.40% (14/3 500), 0.14% (5/3 500), and that of 65-69 years old were 5.46% (46/843), 23.25% (196/843), 3.68% (31/843), 2.14% (18/843). The proportion of esophageal precursor lesion of Linzhou were higher than that of Feicheng observably except for esophageal squamous cell cancer (P values were < 0.001, < 0.001, < 0.001, 0.437). The detection rates of the four lesions of Linzhou and Feicheng were 4.90% (504/10 287), 17.37% (1 787/10 287), 1.79% (184/1 0287), 0.60% (62/10 287) and 1.64% (88/5 376), 13.17% (708/5 376), 1.04% (56/5 376), 0.71% (38/5 376). The 95% CI of detection rates of various lesions were, 3.78% (3.48%-4.08%) for basal cell hyperplasia, 15.93% (15.37%-16.50%) for low-grade intraepithelial neoplasia, 12.31% (11.79%-12.82%) for mild dysplasia and 3.62% (3.33%-3.91%) for moderate hyperplasia, 1.53% (1.34%-1.72%) for high-grade intraepithelial neoplasia and 0.64% (0.51%-0.76%) for esophageal squamous cell cancer, respectively.</p><p><b>CONCLUSION</b>Up to 21.88% residents that were asymptomatic were suffered from esophageal squamous cancer or precursor lesions in high-risk areas in China. The distribution of esophageal squamous cell cancer and precursor lesions was closely related to the gender and the age, which suggested that males were supposed to be paid more attention to.</p>
Asunto(s)
Adulto , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Distribución por Edad , Carcinoma de Células Escamosas , Epidemiología , China , Epidemiología , Endoscopía , Neoplasias Esofágicas , Epidemiología , Yoduros , Lesiones Precancerosas , Epidemiología , Distribución por SexoRESUMEN
The present paper is to study the center line of the plantar pressure of normal young people, and to find the relation between center line of the plantar pressure and gait stability and balance. The paper gives the testing principle and calculating methods for geometric center of plantar pressure distribution and the center of pressure due to the techniques of footprint frame. The calculating formulas in both x direction and y direction are also deduced in the paper. In the experiments carried out in our laboratory, the gait parameters of 131 young subjects walking as usual speed were acquired, and 14 young subjects of the total were specially analyzed. We then provided reference data for the walking gait database of young people, including time parameters, space parameters and plantar pressure parameters. We also obtained the line of geometry center and pressure center under the foot. We found that the differences existed in normal people's geometric center line and the pressure center line. The center of pressure trajectory revealed foot movement stability. The length and lateral changes of the center line of the plantar pressure could be applied to analysis of the plantar pressure of all kinds of people. The results in this paper are useful in clinical foot disease diagnosis and evaluation of surgical effect.