Vortex fluidic induced mass transfer across immiscible phases.

Mixing immiscible liquids typically requires the use of auxiliary substances including phase transfer catalysts, microgels, surfactants, complex polymers and nano-particles and/or micromixers. Centrifugally separated immiscible liquids of different densities in a 45° tilted rotating tube offer scope for avoiding their use. Micron to submicron size topological flow regimes in the thin films induce high inter-phase mass transfer depending on the nature of the two liquids. A hemispherical base tube creates a Coriolis force as a 'spinning top' (ST) topological fluid flow in the less dense liquid which penetrates the denser layer of liquid, delivering liquid from the upper layer through the lower layer to the surface of the tube with the thickness of the layers determined using neutron imaging. Similarly, double helical (DH) topological flow in the less dense liquid, arising from Faraday wave eddy currents twisted by Coriolis forces, impact through the less dense liquid onto the surface of the tube. The lateral dimensions of these topological flows have been determined using 'molecular drilling' impacting on a thin layer of polysulfone on the surface of the tube and self-assembly of nanoparticles at the interface of the two liquids. At high rotation speeds, DH flow also occurs in the denser layer, with a critical rotational speed reached resulting in rapid phase demixing of preformed emulsions of two immiscible liquids. ST flow is perturbed relative to double helical flow by changing the shape of the base of the tube while maintaining high mass transfer between phases as demonstrated by circumventing the need for phase transfer catalysts. The findings presented here have implications for overcoming mass transfer limitations at interfaces of liquids, and provide new methods for extractions and separation science, and avoiding the formation of emulsions.

Simulating the Feasibility of Using Liquid Micro-Jets for Determining Electron-Liquid Scattering Cross-Sections.

The extraction of electron-liquid phase cross-sections (surface and bulk) is proposed through the measurement of (differential) energy loss spectra for electrons scattered from a liquid micro-jet. The signature physical elements of the scattering processes on the energy loss spectra are highlighted using a Monte Carlo simulation technique, originally developed for simulating electron transport in liquids. Machine learning techniques are applied to the simulated electron energy loss spectra, to invert the data and extract the cross-sections. The extraction of the elastic cross-section for neon was determined within 9% accuracy over the energy range 1-100 eV. The extension toward the simultaneous determination of elastic and ionisation cross-sections resulted in a decrease in accuracy, now to within 18% accuracy for elastic scattering and 1% for ionisation. Additional methods are explored to enhance the accuracy of the simultaneous extraction of liquid phase cross-sections.

Sub-micron moulding topological mass transport regimes in angled vortex fluidic flow.

Shear stress in dynamic thin films, as in vortex fluidics, can be harnessed for generating non-equilibrium conditions, but the nature of the fluid flow is not understood. A rapidly rotating inclined tube in the vortex fluidic device (VFD) imparts shear stress (mechanical energy) into a thin film of liquid, depending on the physical characteristics of the liquid and rotational speed, ω, tilt angle, θ, and diameter of the tube. Through understanding that the fluid exhibits resonance behaviours from the confining boundaries of the glass surface and the meniscus that determines the liquid film thickness, we have established specific topological mass transport regimes. These topologies have been established through materials processing, as spinning top flow normal to the surface of the tube, double-helical flow across the thin film, and spicular flow, a transitional region where both effects contribute. The manifestation of mass transport patterns within the film have been observed by monitoring the mixing time, temperature profile, and film thickness against increasing rotational speed, ω. In addition, these flow patterns have unique signatures that enable the morphology of nanomaterials processed in the VFD to be predicted, for example in reversible scrolling and crumbling graphene oxide sheets. Shear-stress induced recrystallisation, crystallisation and polymerisation, at different rotational speeds, provide moulds of high-shear topologies, as 'positive' and 'negative' spicular flow behaviour. 'Molecular drilling' of holes in a thin film of polysulfone demonstrate spatial arrangement of double-helices. The grand sum of the different behavioural regimes is a general fluid flow model that accounts for all processing in the VFD at an optimal tilt angle of 45°, and provides a new concept in the fabrication of novel nanomaterials and controlling the organisation of matter.

A Complete Cross Section Data Set for Electron Scattering by Pyridine: Modelling Electron Transport in the Energy Range 0-100 eV.

Electron scattering cross sections for pyridine in the energy range 0-100 eV, which we previously measured or calculated, have been critically compiled and complemented here with new measurements of electron energy loss spectra and double differential ionization cross sections. Experimental techniques employed in this study include a linear transmission apparatus and a reaction microscope system. To fulfill the transport model requirements, theoretical data have been recalculated within our independent atom model with screening corrected additivity rule and interference effects (IAM-SCAR) method for energies above 10 eV. In addition, results from the R-matrix and Schwinger multichannel with pseudopotential methods, for energies below 15 eV and 20 eV, respectively, are presented here. The reliability of this complete data set has been evaluated by comparing the simulated energy distribution of electrons transmitted through pyridine, with that observed in an electron-gas transmission experiment under magnetic confinement conditions. In addition, our representation of the angular distribution of the inelastically scattered electrons is discussed on the basis of the present double differential cross section experimental results.

Turbo thin film continuous flow production of biodiesel from fungal biomass.

Direct biodiesel production from wet fungal biomass may significantly reduce production costs, but there is a lack of fast and cost-effective processing technology. A novel thin film continuous flow process has been applied to study the effects of its operational parameters on fatty acid (FA) extraction and FA to fatty acid methyl ester (FAME) conversion efficiencies. Single factor experiments evaluated the effects of catalyst concentration and water content of biomass, while factorial experimental designs determined the interactions between catalyst concentration and biomass to methanol ratio, flow rate, and rotational speed. Direct transesterification (DT) of wet Mucor plumbeus biomass at ambient temperature and pressure achieved a FA to FAME conversion efficiency of >90% using 3 wt/v % NaOH concentration, if the water content was ≤50% (w/w). In comparison to existing DT methods, this continuous flow processing technology has an estimated 90-94% reduction in energy consumption, showing promise for up-scaling.

Continuous flow biodiesel production from wet microalgae using a hybrid thin film microfluidic platform.

A novel continuous flow turbo-thin film device (T2FD) has been developed. The microfluidic platform is effective in high yielding production of biodiesel from wet microalgae at room temperature under continuous flow conditions. These findings open the possibility of cost effective production of biodiesel directly from wet microalgae.

Plasma enhanced vortex fluidic device manipulation of graphene oxide.

A vortex fluid device (VFD) with non-thermal plasma liquid processing within dynamic thin films has been developed. This plasma-liquid microfluidic platform facilitates chemical processing which is demonstrated through the manipulation of the morphology and chemical character of colloidal graphene oxide in water.

The electron-furfural scattering dynamics for 63 energetically open electronic states.

We report on integral-, momentum transfer- and differential cross sections for elastic and electronically inelastic electron collisions with furfural (C5H4O2). The calculations were performed with two different theoretical methodologies, the Schwinger multichannel method with pseudopotentials (SMCPP) and the independent atom method with screening corrected additivity rule (IAM-SCAR) that now incorporates a further interference (I) term. The SMCPP with N energetically open electronic states (N(open)) at either the static-exchange (N(open) ch-SE) or the static-exchange-plus-polarisation (N(open) ch-SEP) approximation was employed to calculate the scattering amplitudes at impact energies lying between 5 eV and 50 eV, using a channel coupling scheme that ranges from the 1ch-SEP up to the 63ch-SE level of approximation depending on the energy considered. For elastic scattering, we found very good overall agreement at higher energies among our SMCPP cross sections, our IAM-SCAR+I cross sections and the experimental data for furan (a molecule that differs from furfural only by the substitution of a hydrogen atom in furan with an aldehyde functional group). This is a good indication that our elastic cross sections are converged with respect to the multichannel coupling effect for most of the investigated intermediate energies. However, although the present application represents the most sophisticated calculation performed with the SMCPP method thus far, the inelastic cross sections, even for the low lying energy states, are still not completely converged for intermediate and higher energies. We discuss possible reasons leading to this discrepancy and point out what further steps need to be undertaken in order to improve the agreement between the calculated and measured cross sections.

Electron collisions with phenol: Total, integral, differential, and momentum transfer cross sections and the role of multichannel coupling effects on the elastic channel.

We report theoretical and experimental total cross sections for electron scattering by phenol (C6H5OH). The experimental data were obtained with an apparatus based in Madrid and the calculated cross sections with two different methodologies, the independent atom method with screening corrected additivity rule (IAM-SCAR), and the Schwinger multichannel method with pseudopotentials (SMCPP). The SMCPP method in the Nopen-channel coupling scheme, at the static-exchange-plus-polarization approximation, is employed to calculate the scattering amplitudes at impact energies ranging from 5.0 eV to 50 eV. We discuss the multichannel coupling effects in the calculated cross sections, in particular how the number of excited states included in the open-channel space impacts upon the convergence of the elastic cross sections at higher collision energies. The IAM-SCAR approach was also used to obtain the elastic differential cross sections (DCSs) and for correcting the experimental total cross sections for the so-called forward angle scattering effect. We found a very good agreement between our SMCPP theoretical differential, integral, and momentum transfer cross sections and experimental data for benzene (a molecule differing from phenol by replacing a hydrogen atom in benzene with a hydroxyl group). Although some discrepancies were found for lower energies, the agreement between the SMCPP data and the DCSs obtained with the IAM-SCAR method improves, as expected, as the impact energy increases. We also have a good agreement among the present SMCPP calculated total cross section (which includes elastic, 32 inelastic electronic excitation processes and ionization contributions, the latter estimated with the binary-encounter-Bethe model), the IAM-SCAR total cross section, and the experimental data when the latter is corrected for the forward angle scattering effect [Fuss et al., Phys. Rev. A 88, 042702 (2013)].

The effects of selected preoxidation strategies on I-THM formation and speciation.

In this study, the impacts of three preoxidation strategies [i.e., using potassium permanganate (KMnO(4)), chlorine dioxide (ClO(2)), or hydrogen peroxide (H(2)O(2))] before preformed monochloramine (NH(2)Cl) addition on the formation and speciation of iodinated trihalomethanes (I-THMs) were evaluated at the Br(-)/I(-) mass ratio of 10 in two natural waters. The effects of preoxidant dose, Br(-)/DOC, and I(-)/DOC ratio were investigated. Preoxidation with KMnO(4) increased I-THM formation due to an increase in iodoform (CHI(3)) and brominated I-THM (CHBrClI, CHBrI(2), CHBr(2)I) formation. In contrast, preoxidation with ClO(2) sometimes reduced I-THM formation, primarily due to a reduction in CHI(3) formation. Preoxidation with H(2)O(2) had no effect on I-THM formation or speciation. I-THM formation from each preoxidant alone was considerably less than the formation from NH(2)Cl. Overall, preoxidant type, preoxidant/DOC, preoxidant/I(-), and I(-)/DOC ratios are the important factors that water utilities should evaluate when assessing the impact of preoxidation for controlling I-THM formation.

Elastic and inelastic cross sections for low-energy electron collisions with pyrimidine.

We present theoretical elastic and electronic excitation cross sections and experimental electronic excitation cross sections for electron collisions with pyrimidine. We use the R-matrix method to determine elastic integral and differential cross sections and integral inelastic cross sections for energies up to 15 eV. The experimental inelastic cross sections have been determined in the 15-50 eV impact energy range. Typically, there is quite reasonable agreement between the theoretical and experimental integral inelastic cross sections. Calculated elastic cross sections agree very well with prior results.

The impact of bromide/iodide concentration and ratio on iodinated trihalomethane formation and speciation.

The objective of this study was to evaluate the formation and speciation of iodinated trihalomethanes (I-THMs) from preformed chloramination of waters containing bromide (Br(-)) and iodide (I(-)) at a Br(-)/I(-) weight ratio of 10:1. The factors investigated were pH, iodide to dissolved organic carbon (I(-)/DOC) ratio, and NOM characteristics, specifically SUVA(254). A Br(-)/I(-) ratio of 1:2 was also evaluated to determine the importance of Br(-) and I(-) concentrations and ratio on I-THM formation and speciation. Regulated triholamethanes (THMs) were measured alongside I-THMs for a more complete understanding of trihalomethane formation. The results showed that, in general, both I-THM and THM formation increased with decreased pH. Greater formation at lower pH was likely attributed to monochloramine decomposition and the formation of additional oxidants and substituting agents, most notably chlorine. For pH ≥ 7.5, I-THM yield increased with increasing I(-)/DOC ratio and decreasing specific ultraviolet absorbance (SUVA(254)) of the water. The Br(-)/I(-), Br(-)/DOC and I(-)/DOC ratios were important factors for I-THM and THM speciation. At pH 6, dichloroiodomethane (CHCl(2)I) and bromochloroiodomethane (CHBrClI) were the dominant species at the common bromide and iodide levels. For pH ≥ 7.5 and for elevated bromide and iodide levels, iodoform (CHI(3)) was always the dominant specie regardless of the Br(-)/I(-) ratio. The results demonstrated that it is important to examine I-THM formation and speciation at typical Br(-)/I(-) ratios (≈ 10) of natural waters, which have often been overlooked in previous investigations, in order to obtain practical and relevant results.

I-THM formation and speciation: preformed monochloramine versus prechlorination followed by ammonia addition.

An increasing number of utilities in the United States have been switching from chlorination to chloramination practices to comply with the more stringent trihalomethane (THM) and haloacetic acid (HAA) regulations. This has important implications for disinfection byproduct (DBP) formation because the reactions of chlorine and monochloramine (NH(2)Cl) with natural organic matter (NOM) are not the same. In this study, iodinated trihalomethane (I-THM) formation from preformed NH(2)Cl and prechlorination (at two chlorine doses and contact times) followed by ammonia addition was compared. A representative bromide/iodide ratio of 10:1 was selected and four bromide/iodide levels (ambient, 50/5 or 100/10, 200/20, and 800/80 [µg/L/µg/L]) were evaluated. The results showed that I-THM formation was generally lower for prechlorination as compared to preformed NH(2)Cl due to the oxidation of iodide to iodate by chlorine. However, while prechlorination minimized iodoform (CHI(3)) formation, prechlorination sometimes formed more I-THMs as compared to preformed NH(2)Cl due to a large increase in the formation of brominated I-THM species, which were formed at much smaller amounts from preformed NH(2)Cl. I-THM concentrations and speciation for the two chloramination scenarios (i.e., preformed NH(2)Cl vs prechlorination followed by ammonia) depended on chlorine dose, contact time, bromide/iodide concentration, and NOM characteristics of the source water (SUVA(254)).