RESUMEN
In this study, samarium (Sm-10at%)-doped BiFeO3 (SmBFO) thin films were grown on platinum-coated glass substrates using pulsed laser deposition (PLD) to unveil the correlation between the microstructures and nanomechanical properties of the films. The PLD-derived SmBFO thin films were prepared under various oxygen partial pressures (PO2) of 10, 30, and 50 mTorr at a substrate temperature of 600 °C. The scanning electron microscopy analyses revealed a surface morphology consisting of densely packed grains, although the size distribution varied with the PO2. X-ray diffraction results indicate that all SmBFO thin films are textured and preferentially oriented along the (110) crystallographic orientation. The crystallite sizes of the obtained SmBFO thin films calculated from the Scherrer and (Williamson-Hall) equations increased from 20 (33) nm to 25 (52) nm with increasing PO2. In addition, the nanomechanical properties (the hardness and Young's modulus) of the SmBFO thin films were measured by using nanoindentation. The relationship between the hardness and crystalline size of SmBFO thin films appears to closely follow the Hall-Petch equation. In addition, the PO2 dependence of the film microstructure, the crystallite size, the hardness, and Young's modulus of SmBFO thin films are discussed.
RESUMEN
The search for materials for next-generation spintronic applications has witnessed exponentially increasing interest, mainly due to the explosive development of numerous two-dimensional (2D) materials discovered in the last decade. Among them, MXenes have emerged as promising candidates for many applications due to their unique and versatile tunability in structure and properties. In particular, their excellent combination of conductivity and highly charged surfaces leads to outstanding electrochemical properties that are significant in electronic applications. Moreover, the ease of modifying the atomic and electronic structures, and thus the functionalities of MXenes, further opens up the opportunity to realize MXenes-based spintronic device applications. The explosive development of MXenes, such as tuning the bandgap and enhancing their magnetic properties, could pave the way for the integration of MXenes in device configurations suitable for spintronics. In this article, we provide an overview of the potential applications of MXenes with a special focus on spintronic device applications. We commence the discussion with various fundamental aspects of spintronics, including the understanding of materials for spintronics in general, MXenes, and their fabrication, followed by presenting perspectives on plausible strategies and future challenges in integrating MXenes into spintronic devices.
RESUMEN
The rational design of advanced catalysts for sodium-sulfur (Na-S) batteries is important but remains challenging due to the limited understanding of sulfur catalytic mechanisms. Here, we propose an efficient sulfur host consisting of atomic low-coordinated Zn-N2 sites dispersed on N-rich microporous graphene (Zn-N2@NG), which realizes state-of-the-art sodium-storage performance with a high sulfur content of 66 wt %, high-rate capability (467 mA h g-1 at 5 A g-1), and long cycling stability for 6500 cycles with an ultralow capacity decay rate of 0.0062% per cycle. Ex situ methods combined with theoretical calculations demonstrate the superior bidirectional catalysis of Zn-N2 sites on sulfur conversion (S8 â Na2S). Furthermore, in situ transmission electron microscopy was applied to visualize the microscopic S redox evolution under the catalysis of Zn-N2 sites without liquid electrolytes. During the sodiation process, both surface S nanoparticles and S molecules in the mircopores of Zn-N2@NG quickly convert into Na2S nanograins. During the following desodiation process, only a small part of the above Na2S can be oxidized into Na2Sx. These results reveal that, without liquid electrolytes, Na2S is difficult to be decomposed even with the assistance of Zn-N2 sites. This conclusion emphasizes the critical role of liquid electrolytes in the catalytic oxidation of Na2S, which was usually ignored by previous works.
RESUMEN
Iridium (Ir)-based electrocatalysts are widely explored as benchmarks for acidic oxygen evolution reactions (OERs). However, further enhancing their catalytic activity remains challenging due to the difficulty in identifying active species and unfavorable architectures. In this work, we synthesized ultrathin Ir-IrOx/C nanosheets with ordered interlayer space for enhanced OER by a nanoconfined self-assembly strategy, employing block copolymer formed stable end-merged lamellar micelles. The interlayer distance of the prepared Ir-IrOx/C nanosheets was well controlled at â¼20 nm and Ir-IrOx nanoparticles (â¼2 nm) were uniformly distributed within the nanosheets. Importantly, the fabricated Ir-IrOx/C electrocatalysts display one of the lowest overpotential (η) of 198 mV at 10 mA cm-2geo during OER in an acid medium, benefiting from their features of mixed-valence states, rich electrophilic oxygen species (O(II-δ)-), and favorable mesostructured architectures. Both experimental and computational results reveal that the mixed valence and O(II-δ)- moieties of the 2D mesoporous Ir-IrOx/C catalysts with a shortened Ir-O(II-δ)- bond (1.91 Å) is the key active species for the enhancement of OER by balancing the adsorption free energy of oxygen-containing intermediates. This strategy thus opens an avenue for designing high performance 2D ordered mesoporous electrocatalysts through a nanoconfined self-assembly strategy for water oxidation and beyond.
RESUMEN
In this work, highly conductive Al-doped ZnO (AZO) films are deposited on transparent and flexible muscovite mica substrates by using the atomic layer deposition (ALD) technique. AZO-mica structures possess high optical transmittance at visible and near-infrared spectral range and retain low electric resistivity, even after continuous bending of up to 800 cycles. Structure performances after bending tests have been supported by atomic force microscopy (AFM) analysis. Based on performed optical and electrical characterizations AZO films on mica are implemented as transparent conductive electrodes in flexible polymer dispersed liquid crystal (PDLC) devices. The measured electro-optical characteristics and response time of the proposed devices reveal the higher potential of AZO-mica for future ITO-free flexible optoelectronic applications.
RESUMEN
Metastable ε-Fe2O3 is a unique phase of iron oxide, which exhibits a giant coercivity field. In this work, we grew epitaxial ε-Fe2O3 films on flexible two-dimensional muscovite substrates via quasi van der Waals epitaxy. It turns out that twinning and interface energies have been playing essential roles in stabilizing metastable ε-Fe2O3 on mica substrates. Moreover, the weak interfacial bonding between ε-Fe2O3 and mica is expected to relieve the substrate clamping effect ubiquitously encountered in films epitaxially grown on rigid substrates, such as SrTiO3. It is anticipated that these flexible ε-Fe2O3 thin films can serve as a platform for exploring possible interesting emergent physical properties and eventually be integrated as flexible functional devices.
RESUMEN
Engineering the interfaces between materials of different structures and bonding nature in a well-controlled fashion has been playing a key role in developing new devices with unprecedented functionalities. In particular, direct growth of nanostructures on van der Waals substrates not only is essential for fully exploiting the potential of a wide variety of self-assembled nano-sized heterostructures but also can expand the horizons for electronic and photonic applications that involve nanostructures of specific composition and geometry. In the present work, we demonstrate the epitaxial growth of a self-assembled vertically aligned nanocomposite of magnetoelectric oxides on a flexible substrate via van der Waals epitaxy, which evidently adds an additional dimension of flexibility to similar thin-film heteroepitaxy architectures that have been mostly realized on rigid lattice-matched substrates. It is noted that the utilization of buffer layers is essential for obtaining high-quality flexible thin films with vertically aligned nanocomposite architecture. We believe that this route can provide alternative options for developing flexible thin-film devices with heteroepitaxy architectures of other functional materials.
RESUMEN
Epitaxial CoFe2O4(CFO)/CoO bilayers were fabricated by pulsed laser deposition on flexible muscovite mica substrate. Samples with different CFO thicknesses were employed to study the phenomenon of exchange bias involving strongly anisotropic ferromagnet. Magnetic measurements exhibited great enhancement in the features of exchange bias. Raman and X-ray absorption spectroscopies indicated that a new phase emerged within the CFO layer because of the cation charge redistribution in CFO layer under bending, which in turn gave rise to anomalous hysteresis loops exhibited in the bent bilayers. These results provide a fundamental understanding about the mechanisms of exchange bias prevailing in these bilayers and call attention to the implementation of spintronic devices using flexible heterostructures such as the present CFO/CoO bilayers.
RESUMEN
The correlations between the microstructure and nanomechanical properties of a series of thermal annealed Co thin films were investigated. The Co thin films were deposited on glass substrates using a magnetron sputtering system at ambient conditions followed by subsequent annealing conducted at various temperatures ranging from 300 C to 800 C. The XRD results indicated that for annealing temperature in the ranged from 300 C to 500 C, the Co thin films were of single hexagonal close-packed (hcp) phase. Nevertheless, the coexistence of hcp-Co (002) and face-centered cubic (fcc-Co (111)) phases was evidently observed for films annealed at 600 C. Further increasing the annealing temperature to 700 C and 800 C, the films evidently turned into fcc-Co (111). Moreover, significant variations in the hardness and Young's modulus are observed by continuous stiffness nanoindentation measurement for films annealed at different temperatures. The correlations between structures and properties are discussed.
RESUMEN
The employment of flexible muscovite substrates has given us the feasibility of applying strain to heterostructures dynamically by mechanical bending. In this study, this novel approach is utilized to investigate strain effects on the exchange coupling in ferromagnetic Co and anti-ferromagnetic CoO (Co/CoO) bilayers. Two different Co/CoO bilayer heterostructures were grown on muscovite substrates by oxide molecular beam epitaxy, with the CoO layer being purely (111)- and (100)-oriented. The strain-dependent exchange coupling effect can only be observed on Co/CoO(100)/mica but not on Co/CoO(111)/mica. The origin of this phenomenon is attributed to the anisotropic spin re-orientation induced by mechanical bending. The strain-dependent magnetic anisotropy of the bilayers determined by anisotropic magnetoresistance measurements confirms this conjecture. This study elucidates the fundamental understanding of how magnetic exchange coupling can be tuned by externally applied strain via mechanical bending and, hence, provides a novel approach for implementing flexible spintronic devices.
RESUMEN
The deformation behaviors and fracture features of GaP(100) single-crystal are investigated by using nano- and micro-scale indentation techniques. The hardness and Young's modulus were measured by nanoindentation using a Berkovich diamond indenter with continuous contact stiffness measurements (CSM) mode and the values obtained were 12.5 ± 1.2 GPa and 152.6 ± 12.8 GPa, respectively. In addition, the characteristic "pop-in" was observed in the loading portion of load-displacement curve, which was caused by the nucleation and/or propagation of dislocations. An energetic estimation methodology on the associated nanoindentation-induced dislocation numbers resulting from the pop-in events was discussed. Furthermore, the Vickers indentation induced fracture patterns of GaP(100) single-crystal were observed and analyzed using optical microscopy. The obtained fracture toughness KC of GaP(100) single-crystal was ~1.7 ± 0.1 MPa·m1/2, which is substantially higher than the KIC values of 0.8 MPa·m1/2 and 1.0 MPa·m1/2 previously reported for of single-crystal and polycrystalline GaP, respectively.
RESUMEN
The indentation-induced deformation mechanisms in InP(100) single crystals were investigated by using nanoindentation and cross-sectional transmission electron microscopy (XTEM) techniques. The results indicated that there were multiple "pop-in" events randomly distributed in the loading curves, which were conceived to arise primarily from the dislocation nucleation and propagation activities. An energetic estimation on the number of nanoindentation-induced dislocations associated with pop-in effects is discussed. Furthermore, the fracture patterns were performed by Vickers indentation. The fracture toughness and the fracture energy of InP(100) single crystals were calculated to be around 1.2 MPa·m1/2 and 14.1 J/m², respectively.
RESUMEN
The nanomechanical properties and nanoindentation responses of bismuth selenide (Bi2Se3) thin films are investigated in this study. The Bi2Se3 thin films are deposited on c-plane sapphire substrates using pulsed laser deposition. The microstructural properties of Bi2Se3 thin films are analyzed by means of X-ray diffraction (XRD). The XRD results indicated that Bi2Se3 thin films are exhibited the hexagonal crystal structure with a c-axis preferred growth orientation. Nanoindentation results showed the multiple "pop-ins" displayed in the loading segments of the load-displacement curves, suggesting that the deformation mechanisms in the hexagonal-structured Bi2Se3 films might have been governed by the nucleation and propagation of dislocations. Further, an energetic estimation of nanoindentation-induced dislocation associated with the observed pop-in effects was made using the classical dislocation theory.
RESUMEN
Transforming thermal energy into electric energy and vice versa needs the decoupling of electrical transport from thermal transport. An innovative strategy is proposed by forming/disrupting electrically triggered conductive nanofilaments within semiconducting thin films to switch thermoelectric properties between two states without further material modification and manufacturing processes. It can also controllably adjust the degree of decoupling, providing a potential resolution and performance adjustability for heat/coldness control or power consumption reduction on demand.
RESUMEN
The evolution of iron local vibrational mode (Fe LVM) and phase transitions in n-type iron-doped indium phosphide (InP:Fe) were investigated at ambient temperature. In-situ angle-dispersive X-ray diffraction measurements revealed that InP:Fe starts to transform from zinc-blende (ZB) to rock-salt (RS) structure around 8.2(2) GPa and completes around 16.0(2) GPa. The Raman shift of both transverse and longitudinal optical modes increases monotonically with increasing pressure, while their intensities become indiscernible at 11.6(2) GPa, suggesting that the pressure-induced phase transition is accompanied by significant metallization. In contrast, originally absent at ambient pressure, the Raman shift of Fe LVM appears at â¼420 cm-1 near 1.2 GPa and exhibits a dome shape behavior with increasing pressure, reaching a maximum value of â¼440 cm-1 around 5 GPa, with an apparent kink occurring around the ZB-RS transition pressure of â¼8.5(2) GPa. The Fe K-edge X-ray absorption near edge structure (XANES) confirmed the tetrahedral site occupation of Fe3+ with a crystal field splitting parameter Δ t = 38 kJ·mole-1. Our calculations indicate that the energy parameters governing the phase transition are Δt = 0.49 and Δ o = 1.10 kJ·mole-1, respectively, both are much smaller than Δ t = 38 kJ·mole-1 at ambient.
RESUMEN
Magnetoelectric nanocomposites have been a topic of intense research due to their profound potential in the applications of electronic devices based on spintronic technology. Nevertheless, in spite of significant progress made in the growth of high-quality nanocomposite thin films, the substrate clamping effect still remains a major hurdle in realizing the ultimate magnetoelectric coupling. To overcome this obstacle, an alternative strategy of fabricating a self-assembled ferroelectric-ferrimagnetic bulk heterojunction on a flexible muscovite via van der Waals epitaxy is adopted. In this study, we investigated the magnetoelectric coupling in a self-assembled BiFeO3 (BFO)-CoFe2O4 (CFO) bulk heterojunction epitaxially grown on a flexible muscovite substrate. The obtained heterojunction is composed of vertically aligned multiferroic BFO nanopillars embedded in a ferrimagnetic CFO matrix. Moreover, due to the weak interaction between the flexible substrate and bulk heterojunction, the interface is incoherent and, hence, the substrate clamping effect is greatly reduced. The phase-field simulation model also complements our results. The magnetic and electrical characterizations highlight the improvement in magnetoelectric coupling of the BFO-CFO bulk heterojunction. A magnetoelectric coupling coefficient of 74 mV/cm·Oe of this bulk heterojunction is larger than the magnetoelectric coefficient reported earlier on flexible substrates. Therefore, this study delivers a viable route of fabricating a remarkable magnetoelectric heterojunction and yet flexible electronic devices that are robust against extreme conditions with optimized performance.
RESUMEN
In this work, aiming at developing a rapid and environmental-friendly process for fabricating CuIn1-x Ga x Se2 (CIGS) solar cells, we demonstrated the one-step selenization process by using selenium vapor as the atmospheric gas instead of the commonly used H2Se gas. The photoluminescence (PL) characteristics indicate that there exists an optimal location with superior crystalline quality in the CIGS thin films obtained by one-step selenization. The energy dispersive spectroscopy (EDS) reveals that the Ga lateral distribution in the one-step selenized CIGS thin film is intimately correlated to the blue-shifted PL spectra. The surface morphologies examined by scanning electron microscope (SEM) further suggested that voids and binary phase commonly existing in CIGS films could be successfully eliminated by the present one-step selenization process. The agglomeration phenomenon attributable to the formation of MoSe2 layer was also observed. Due to the significant microstructural improvement, the current-voltage (J-V) characteristics and external quantum efficiency (EQE) of the devices made of the present CIGS films have exhibited the remarkable carrier transportation characteristics and photon utilization at the optimal location, resulting in a high conversion efficiency of 11.28%. Correlations between the defect states and device performance of the one-step selenized CIGS thin film were convincingly delineated by femtosecond pump-probe spectroscopy.
RESUMEN
The photoluminescence (PL) and reflectivity characteristics of zinc oxide nanopillars (ZnO-NPs) grown on indium-tin-oxide (ITO)-coated glasses were investigated. The room temperature PL showed bright white-light emission for the undoped ZnO-NPs grown at 600 °C, suggesting the close relation between the optical characteristic and the growth conditions being carried out for obtaining the present ZnO-NPs. The reflectivity of the as-grown ZnO-NPs array was about â¼29% with the wavelength of the incident light ranging from 200 to 1800 nm. Nevertheless, the reflectance reduced significantly to less than 9.9% when a layer of gold (Au) was deposited on ZnO-NPs by sputtering for 5 min, corresponding to more than 65% reduction in Au-coated ZnO-NPs (Au/ZnO-NPs). Moreover, the angle-resolved reflectance measurements on the present Au/ZnO-NPs array show an omnidirectional light-trapping characteristic. These remarkable characteristics, broadband and omnidirectional light-trapping of Au/ZnO-NPs, are attributed to the extended effective optical path of the incident light due to subwavelength scattering resulting from the presence of Au nanoparticles.
RESUMEN
Ink-printing method emerges as a viable way for manufacturing large-scale flexible Cu(In,Ga)Se2 (CIGS) thin film photovoltaic (TFPV) devices owing to its potential for the rapid process, mass production, and low-cost nonvacuum device fabrication. Here, we brought the femtosecond laser annealing (fs-LA) process into the ink-printing CIGS thin film preparation. The effects of fs-LA treatment on the structural and optoelectronic properties of the ink-printing CIGS thin films were systematically investigated. It was observed that, while the film surface morphology remained essentially unchanged under superheating, the quality of crystallinity was significantly enhanced after the fs-LA treatment. Moreover, a better stoichiometric composition was achieved with an optimized laser scanning rate of the laser beam, presumably due to the much reduced indium segregation phenomena, which is believed to be beneficial in decreasing the defect states of InSe, VSe, and InCu. Consequently, the shunt leakage current and recombination centers were both greatly decreased, resulting in a near 20% enhancement in photovoltaic conversion efficiency.
RESUMEN
A bimorph composed of ferrimagnetic cobalt ferrite (CoFe2O4, CFO) and flexible muscovite was fabricated via van der Waals epitaxy. The combination of X-ray diffraction and transmission electron microscopy was conducted to reveal the heteroepitaxy of the CFO/muscovite system. The robust magnetic behaviors against mechanical bending were characterized by hysteresis measurements and magnetic force microscopy, which maintain a saturation magnetization (Ms) of â¼120-150 emu/cm3 under different bending states. The large magnetostrictive response of the CFO film was then determined by digital holographic microscopy, where the difference of magnetostrction coefficient (Δλ) is -104 ppm. The superior performance of this bimorph is attributed to the nature of weak interaction between film and substrate. Such a flexible CFO/muscovite bimorph provides a new platform to develop next-generation flexible magnetic devices.