Purification of secretory IgA monoclonal antibodies enriched fraction directly from cell culture medium using aqueous two-phase systems.

Secretory immunoglobulin A [sIgA] is a promising candidate for enteric therapeutics applications, and several sIgA-based constructs are currently being developed by groups utilizing clarified Chinese hamster ovary [CHO] cell culture supernatants. To the monoclonal antibody downstream processing typically entails chromatography-based purification processes beginning with Protein A chromatography. In this paper, aqueous two-phase systems [ATPS] were employed for the preliminary purification of secretory immunoglobulin A [sIgA] monoclonal antibody [mAb] from clarified CHO-cell culture supernatants. A 24 full factorial design was utilized. The influence of various process parameters such as pH, PEG molecular weight [MPEG], PEG concentration [CPEG], and phosphate salt concentration [CPHO], on the sIgA partition coefficient [K sIgA] and the recovery index [Y] in the PEG phase were evaluated. The Elisa assay revealed that, in the ATPS conditions tested, sIgA mAb was mostly detected in PEG upper phase. Run 14 with the highest sIgA activity exhibited the following conditions: MPEG 8.000 g/mol, CPEG 12,5 %, pH 7,0 and CPHO 10 %, and a sIgA K of 94.50 and a recovery index [Y] of 33.52 %. The proposed platform provides straightforward implementation, yields comparable results, and offers significantly improved economics for manufacturing sIgA mAb biotherapeutics.

Antibody-ligand interactions on a high-capacity staphylococcal protein A resin.

Staphylococcal protein-A affinity chromatography has been optimized for antibody purification, achieving a current capacity of up to 90 mg/ml in packed bed. The morphology of the particles, the number of antibodies bound per ligand and the spatial arrangement of the ligands were assessed by in-situ Small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM) combined with measurement of adsorption isotherms. We employed SAXS measurements to probe the nanoscale structure of the chromatographic resin. From scanning electron microcopy, the morphology and area of the beads were obtained. The adsorption isotherm revealed a bi-Langmuirian behavior where the association constant varied with the critical bulk concentration, indicating multilayer adsorption. Determining the antibody-ligand stoichiometry was crucial for understanding the adsorption mechanism, which was estimated to be 4 at lower concentrations and 4.5 at higher concentrations, suggestive of reversible protein-protein interactions. The same results were reached from the in-situ small angle X-ray scattering measurements. A stoichiometry of 6 cannot be achieved since the two protein A monomers are anchored to the stationary phase and thus sterically hindered. Normalization through ellipsoids facilitated SAXS analysis, enabling the determination of distances between ligands and antibody-ligand complexes. Density fluctuations were examined by subtracting the elliptical fit, providing insights into ligand density distribution. The dense ligand packing of TOYOPEARL® AF-rProtein A HC was confirmed, making further increases in ligand density impractical. Additionally, SAXS analysis revealed structural rearrangements of the antibody-ligand complex with increasing antibody surface load, suggesting reversible association of antibodies.

Increased efficacy of influenza virus vaccine candidate through display of recombinant neuraminidase on virus like particles.

Vaccination against influenza virus can reduce the risk of influenza by 40% to 60%, they rely on the production of neutralizing antibodies specific to influenza hemagglutinin (HA) ignoring the neuraminidase (NA) as an important surface target. Vaccination with standardized NA concentration may offer broader and longer-lasting protection against influenza infection. In this regard, we aimed to compare the potency of a NA displayed on the surface of a VLP with a soluble NA. The baculovirus expression system (BEVS) and the novel virus-free Tnms42 insect cell line were used to express N2 NA on gag-based VLPs. To produce VLP immunogens with high levels of purity and concentration, a two-step chromatography purification process combined with ultracentrifugation was used. In a prime/boost vaccination scheme, mice vaccinated with 1 µg of the N2-VLPs were protected from mortality, while mice receiving the same dose of unadjuvanted NA in soluble form succumbed to the lethal infection. Moreover, NA inhibition assays and NA-ELISAs of pre-boost and pre-challenge sera confirm that the VLP preparation induced higher levels of NA-specific antibodies outperforming the soluble unadjuvanted NA.

An inert tracer: The binding site of a fluorescent dye on the antibody and its effects on Protein A chromatography.

Fluorescently labeled antibodies are widely used to visualize the adsorption process in protein chromatography using confocal laser scanning microscopy (CLSM), but also as a tracer for determination of residence time distribution (RTD) in continuous chromatography. It is assumed that the labeled protein is inert and representative of the unlabeled antibody, ignoring the fact that labeling with a fluorescent dye can change the characteristics of the original molecule. It became evident that the fluorescently labeled antibody has a higher affinity toward protein A resins such as MabSelect Sure. This can be due to slight differences in hydrophobicity and net charge, which are caused by the addition of the fluorescent dye. However, this difference is eliminated when using high salt concentrations in the adsorption studies. In this work, the site occupancy of two labeled antibodies, MAb1 (IgG1 subclass) and MAb2 (IgG2 subclass) conjugated with the fluorescent dye Alexa Fluor™ 488 was elucidated by intact mass spectrometry (MS) and peptide mapping LC-MS/MS, employing a sequential cleavage with Endoproteinase Lys-C and trypsin and in parallel with chymotrypsin alone. It was shown that the main binding site for the dye was a specific lysine in the heavy chains of the MAb1 and MAb2 molecules, in positions 188 and 189 respectively. Other lysine residues distributed throughout the protein sequence were labeled to a lot lesser extent. The labeled antibody had a slightly different affinity to MabSelect Sure although its primary binding site (to Protein A) was not affected by labeling, despite the secondary region responsible for binding to the protein A was partly labeled. Overall, the fluorescent-labeled antibodies are a good compromise as an inert tracer in residence time distribution and chromatography studies because they are much cheaper than isotope-labeled antibodies; However, the differences between the labeled and unlabeled antibodies should be considered.

Status and future developments for downstream processing of biological products: Perspectives from the Recovery XIX yield roundtable discussions.

Governments and biopharmaceutical organizations aggressively leveraged expeditious communication capabilities, decision models, and global strategies to make a COVID-19 vaccine happen within a period of 12 months. This was an unusual effort and cannot be transferred to normal times. However, this focus on a single vaccine has also led to other treatments and drug developments being sidelined. Society expects the pharmaceutical industry to provide an uninterrupted supply of medicines. However, it is often overlooked how complex the manufacture of these compounds is and what logistics are required, not to mention the time needed to develop new drugs. The overarching theme, therefore, is patient access and how we can help ensure access and extend it to low- and middle-income countries. Despite unceasing efforts to make medications available to all patient populations, this must never be done at the expense of patient safety. A major fraction of the costs in biopharmaceutical manufacturing are for drug discovery, process development, and clinical studies. Infrastructure costs are very difficult to quantify because they often depend on whether a greenfield facility or an existing, depreciated facility is used or adapted for a new product. To accelerate process development concepts of platform process and prior knowledge are increasingly leveraged. While more traditional protein therapeutics continue to dominate the field, we are also experiencing the exciting emergence and evolution of other therapeutic formats (bispecifics, tetravalent mAbs, antibody-drug conjugates, enzymes, peptides, etc.) that offer unique treatment options for patients. Protein modalities are still dominant, but new modalities are being developed that can be learned from including advanced therapeutics-like cell and gene therapies. The industry must develop a model-based strategy for process development and technologies such as continuous integrated biomanufacturing must be adopted. The overall conclusion is that the pandemic pace was unsustainable, focused on vaccine delivery at the expense of other modalities/disease targets, and had implications for professional and personal life (work-life balance). Routinely reducing development time from 10 years to 1 year is nearly impossible to achieve. Environmental aspects of sustainable downstream processing are also described.

Standardized approach for accurate and reliable model development of ion-exchange chromatography based on parameter-by-parameter method and consideration of extra-column effects.

Developing an accurate and reliable model for chromatographic separation that meets regulatory requirements and ensures consistency in model development remains challenging. In order to address this challenge, a standardized approach was proposed in this study with ion-exchange chromatography (IEC). The approach includes the following steps: liquid flow identification, system and column-specific parameters determination and validation, multi-component system identification, protein amount validation, steric mass action parameters determination and evaluation, and validation of the calibrated model's generalization ability. The parameter-by-parameter (PbP) calibration method and the consideration of extra-column effects were integrated to enhance the accuracy of the developed models. The experiments designed for implementing the PbP method (five gradient experiments for model calibration and one stepwise experiment for model validation) not only streamline the experimental workload but also ensure the extrapolation abilities of the model. The effectiveness of the standardized approach is successfully validated through an application about the IEC separation of industrial antibody variants, and satisfactory results were observed with R2 ≈ 0.9 for the majority of calibration and validation experiments. The standardized approach proposed in this work contributes significantly to improve the accuracy and reliability of the developed IEC models. Models developed using this standardized approach are ready to be applied to a broader range of industrial separation systems, and are likely find further applications in model-assisted decision-making of process development.

Residence time distribution in continuous virus filtration.

Regulatory authorities recommend using residence time distribution (RTD) to address material traceability in continuous manufacturing. Continuous virus filtration is an essential but poorly understood step in biologics manufacturing in respect to fluid dynamics and scale-up. Here we describe a model that considers nonideal mixing and film resistance for RTD prediction in continuous virus filtration, and its experimental validation using the inert tracer NaNO3. The model was successfully calibrated through pulse injection experiments, yielding good agreement between model prediction and experiment ( R 2 > ${R}^{2}\gt $ 0.90). The model enabled the prediction of RTD with variations-for example, in injection volumes, flow rates, tracer concentrations, and filter surface areas-and was validated using stepwise experiments and combined stepwise and pulse injection experiments. All validation experiments achieved R 2 > ${R}^{2}\gt $ 0.97. Notably, if the process includes a porous material-such as a porous chromatography material, ultrafilter, or virus filter-it must be considered whether the molecule size affects the RTD, as tracers with different sizes may penetrate the pore space differently. Calibration of the model with NaNO3 enabled extrapolation to RTD of recombinant antibodies, which will promote significant savings in antibody consumption. This RTD model is ready for further application in end-to-end integrated continuous downstream processes, such as addressing material traceability during continuous virus filtration processes.

Robust and resource-efficient production process suitable for large-scale production of baculovirus through high cell density seed train and optimized infection strategy.

The aim of this study was the development of a scalable production process for high titer (108 pfu/mL and above) recombinant baculovirus stocks with low cell line-derived impurities for the production of virus-like particles (VLP). To achieve this, we developed a high cell density (HCD) culture for low footprint cell proliferation, compared different infection strategies at multiplicity of infection (MOI) 0.05 and 0.005, different infection strategies and validated generally applicable harvest criteria of cell viability ≤ 80%. We also investigated online measurable parameters to observe the baculovirus production. The infection strategy employing a very low virus inoculum of MOI 0.005 and a 1:2 dilution with fresh medium one day after infection proved to be the most resource efficient. There, we achieved higher cell-specific titers and lower host cell protein concentrations at harvest than other tested infection strategies with the same MOI, while saving half of the virus stock for infecting the culture compared to other tested infection strategies. HCD culture by daily medium exchange was confirmed as suitable for seed train propagation, infection, and baculovirus production, equally efficient as the conventionally propagated seed train. Online measurable parameters for cell concentration and average cell diameter were found to be effective in monitoring the production process. The study concluded that a more efficient VLP production process in large scale can be achieved using this virus stock production strategy, which could also be extended to produce other proteins or extracellular vesicles with the baculovirus expression system.

Cytokines as fast indicator of infectious virus titer during process development.

Measuring infectious titer is the most time-consuming method during the production and process development of live viruses. Conventionally, it is done by measuring the tissue culture infectious dose (TCID50) or plaque forming units (pfu) in cell-based assays. Such assays require a time span of more than a week to the readout and significantly slow down process development. In this study, we utilized the pro-inflammatory cytokine response of a Vero production cell line to a recombinant measles vaccine virus (MVV) as model system for rapidly determining infectious virus titer within several hours after infection instead of one week. Cytokines are immunostimulatory proteins contributing to the first line of defence against virus infection. The probed cytokines in this study were MCP-1 and RANTES, which are secreted in a virus dose as well as time dependent manner and correlate to TCID50 over a concentration range of several logarithmic levels with R2 = 0.86 and R2 = 0.83, respectively. Furthermore, the pro-inflammatory cytokine response of the cells was specific for infectious virus particles and not evoked with filtered virus seed. We also discovered that individual cytokine candidates may be more suitable for off- or at-line analysis, depending on the secretion profile as well as their sensitivity towards changing process conditions. Furthermore, the method can be applied to follow a purification procedure and is therefore suited for process development and control.

Control strategy for biopharmaceutical production by model predictive control.

The biopharmaceutical industry is rapidly advancing, driven by the need for cutting-edge technologies to meet the growing demand for life-saving treatments. In this context, Model Predictive Control (MPC) has emerged as a promising solution to address the complexity of modern biopharmaceutical production processes. Its ability to optimize operations and ensure consistent product yields has made it an attractive option for manufacturers in this sector. Furthermore, MPC's alignment with the Process Analytical Technology (PAT) initiative provides an additional layer of assurance, facilitating real-time monitoring and enabling swift adjustments to maintain process integrity. This comprehensive review delves into the various applications of MPC, ranging from robust control to stochastic model predictive control, thereby equipping biotechnologists and process engineers with a powerful toolset. By harnessing the capabilities of MPC, as elucidated in this review, manufacturers can confidently navigate the intricate bioprocessing landscape and unlock this approach's full potential in their production processes.

Selectivity and Resolving Power of Hydrophobic Interaction Chromatography Targeting the Separation of Monoclonal Antibody Variants.

This study presents a comprehensive investigation of the mechanistic understanding of retention and selectivity in hydrophobic interaction chromatography. It provides valuable insights into crucial method-development parameters involved in achieving chromatographic resolution for profiling molecular variants of trastuzumab. Retention characteristics have been assessed for three column chemistries, i.e., butyl, alkylamide, and long-stranded multialkylamide ligands, while distinguishing column hydrophobicity and surface area. Salt type and specifically chloride ions proved to be the key driver for improving chromatographic selectivity, and this was attributed to the spatial distribution of ions at the protein surface, which is ion-specific. The effect was notably more pronounced on the multialkylamide column, as proteins intercalated between the multiamide polymer strands, enabling steric effects. Column coupling proved to be an effective approach for maximizing resolution between molecular variants present in the trastuzumab reference sample and trastuzumab variants induced by forced oxidation. Liquid chromatography-mass spectrometry (LC-MS)/MS peptide mapping experiments after fraction collection indicate that the presence of chloride in the mobile phase enables the selectivity of site-specific deamidation (N30) situated at the heavy chain. Moreover, site-specific oxidation of peptides (M255, W420, and M431) was observed for peptides situated at the Fc region close to the CH2-CH3 interface, previously reported to activate unfolding of trastuzumab, increasing the accessible surface area and hence resulting in an increase in chromatographic retention.

Integration of a perfusion reactor and continuous precipitation in an entirely membrane-based process for antibody capture.

Continuous precipitation coupled with continuous tangential flow filtration is a cost-effective alternative for the capture of recombinant antibodies from crude cell culture supernatant. The removal of surge tanks between unit operations, by the adoption of tubular reactors, maintains a continuous harvest and mass flow of product with the advantage of a narrow residence time distribution (RTD). We developed a continuous process implementing two orthogonal precipitation methods, CaCl2 precipitation for removal of host-cell DNA and polyethylene glycol (PEG) for capturing the recombinant antibody, with no influence on the glycosylation profile. Our lab-scale prototype consisting of two tubular reactors and two stages of tangential flow microfiltration was continuously operated for up to 8 days in a truly continuous fashion and without any product flow interruption, both as a stand-alone capture and as an integrated perfusion-capture. Furthermore, we explored the use of a negatively charged membrane adsorber for flow-through anion exchange as first polishing step. We obtained a product recovery of approximately 80% and constant product quality, with more than two logarithmic reduction values (LRVs) for both host-cell proteins and host-cell DNA by the combination of the precipitation-based capture and the first polishing step.

L-Arginine sulfate reduces irreversible protein binding in immobilized metal affinity chromatography.

Immobilized metal affinity chromatography (IMAC) is a powerful technique for capture and purification of relevant biopharmaceuticals in complex biological matrices. However, protein recovery can be drastically compromised due to surface induced spreading and unfolding of the analyte, leading to fouling of the stationary phase. Here, we report on the kinetics of irreversible adsorption of a protease on an IMAC resin in a time span ranging from minutes to several hours. This trend correlated with the thermal data measured by nano differential scanning calorimetry, and showed a time-dependent change in protein unfolding temperature. Our results highlight that 'soft' proteins show a strong time dependent increase in irreversible adsorption. Furthermore, commonly used co-solvents for preservation of the native protein conformation are tested for their ability to reduce fouling. Thermal data suggests that the amino acid l-arginine is beneficial in preventing unfolding, which was confirmed in batch adsorption experiments. The choice of counter-ions has to be considered when using this amino acid. These results show that l-arginine sulfate decelerates the irreversible adsorption kinetics of proteins on the IMAC stationary phase to a greater extent than l-arginine chloride.

Sensors and chemometrics in downstream processing.

The biopharmaceutical industry is still running in batch mode, mostly because it is highly regulated. In the past, sensors were not readily available and in-process control was mainly executed offline. The most important product parameters are quantity, purity, and potency, in addition to adventitious agents and bioburden. New concepts using disposable single-use technologies and integrated bioprocessing for manufacturing will dominate the future of bioprocessing. To ensure the quality of pharmaceuticals, initiatives such as Process Analytical Technologies, Quality by Design, and Continuous Integrated Manufacturing have been established. The aim is that these initiatives, together with technology development, will pave the way for process automation and autonomous bioprocessing without any human intervention. Then, real-time release would be realized, leading to a highly predictive and robust biomanufacturing system. The steps toward such automated and autonomous bioprocessing are reviewed in the context of monitoring and control. It is possible to integrate real-time monitoring gradually, and it should be considered from a soft sensor perspective. This concept has already been successfully implemented in other industries and requires relatively simple model training and the use of established statistical tools, such as multivariate statistics or neural networks. This review describes a scenario for integrating soft sensors and predictive chemometrics into modern process control. This is exemplified by selective downstream processing steps, such as chromatography and membrane filtration, the most common unit operations for separation of biopharmaceuticals.

Moving adsorption belt system for continuous bioproduct recovery utilizing composite fibrous adsorbents.

A continuous protein recovery and purification system based on the true moving bed concept is presented. A novel adsorbent material, in the form of an elastic and robust woven fabric, served as a moving belt following the general designs observed in known belt conveyors. The composite fibrous material that forms the said woven fabric showed high protein binding capacity, reaching a static binding capacity equal to 107.3 mg/g, as determined via isotherm experiments. Moreover, testing the same cation exchange fibrous material in a packed bed format resulted in excellent dynamic binding capacity values (54.5 mg/g) even when operating at high flow rates (480 cm/h). In a subsequent step, a benchtop prototype was designed, constructed, and tested. Results indicated that the moving belt system could recover a model protein (hen egg white lysozyme) with a productivity up to 0.5 mg/cm2/h. Likewise, a monoclonal antibody was directly recovered from unclarified CHO_K1 cell line culture with high purity, as judged by SDS-PAGE, high purification factor (5.8), and in a single step, confirming the suitability and selectivity of the purification procedure.

Removal of chromatin by salt-tolerant endonucleases for production of recombinant measles virus.

Host cell DNA is a critical impurity in downstream processing of enveloped viruses. Especially, DNA in the form of chromatin is often neglected. Endonuclease treatment is an almost mandatory step in manufacturing of viral vaccines. In order to find the optimal performer, four different endonucleases, two of them salt tolerant, were evaluated in downstream processing of recombinant measles virus. Endonuclease treatment was performed under optimal temperature conditions after clarification and before the purification by flow-through chromatography with a core shell chromatography medium: Capto™ Core 700. Virus infectivity was measured by TCID50. DNA and histone presence in process and purified samples was determined using PicoGreen™ assay and Western blot analysis using an anti-histone antibody, respectively. All tested endonucleases allowed the reduction of DNA content improving product purity. The salt-tolerant endonucleases SAN and M-SAN were more efficient in the removal of chromatin compared with the non-salt-tolerant endonucleases Benzonase® and DENARASE®. Removal of chromatin using M-SAN was also possible without the addition of extra salt to the cell culture supernatant. The combination of the endonuclease treatment, using salt-tolerant endonucleases with flow-through chromatography, using core-shell particles, resulted in high purity and purification efficiency. This strategy has all features for a platform downstream process of recombinant measles virus and beyond.

Pertuzumab Charge Variant Analysis and Complementarity-Determining Region Stability Assessment to Deamidation.

Pertuzumab is a monoclonal antibody used for the treatment of HER2-positive breast cancer in combination with trastuzumab. Charge variants of trastuzumab have been extensively described in the literature; however, little is known about the charge heterogeneity of pertuzumab. Here, changes in the ion-exchange profile of pertuzumab were evaluated by pH gradient cation-exchange chromatography after stressing it for up to 3 weeks at physiological and elevated pH and 37 °C. Isolated charge variants arising under stress conditions were characterized by peptide mapping. The results of peptide mapping showed that deamidation in the Fc domain and N-terminal pyroglutamate formation in the heavy chain are the main contributors to charge heterogeneity. The heavy chain CDR2, which is the only CDR containing asparagine residues, was quite resistant to deamidation under stress conditions according to peptide mapping results. Using surface plasmon resonance, it was shown that the affinity of pertuzumab for the HER2 target receptor does not change under stress conditions. Peptide mapping analysis of clinical samples showed an average of 2-3% deamidation in the heavy chain CDR2, 20-25% deamidation in the Fc domain, and 10-15% N-terminal pyroglutamate formation in the heavy chain. These findings suggest that in vitro stress studies are able to predict in vivo modifications.

Increase in cysteine-mediated multimerization under attractive protein-protein interactions.

The CASPON enzyme became an interesting enzyme for fusion protein processing because it generates an authentic N-terminus. However, the high cysteine content of the CASPON enzyme may induce aggregation via disulfide-bond formation, which can reduce enzymatic activity and be considered a critical quality attribute. Different multimerization states of the CASPON enzyme were isolated by preparative size exclusion chromatography and analyzed with respect to multimerization propensity and enzymatic activity. The impact of co-solutes on multimerization was studied in solution and in adsorbed state. Furthermore, protein-protein interactions in the presence of different co-solutes were measured by self-interaction chromatography and were then correlated to the multimerization propensity. The dimer was the most stable and active species with 50% higher enzymatic activity than the tetramer. Multimerization was mainly governed by a cysteine-mediated pathway, as indicated by DTT-induced reduction of most caspase multimers. In the presence of ammonium sulfate, attractive protein-protein interactions were consistent with those observed for higher multimerization when the cysteine-mediated pathway was followed. Multimerization was also observed under attractive conditions on a chromatographic stationary phase. These findings corroborate common rules to perform protein purification with low residence time to avoid disulfide bond formation and conformational change of the protein upon adsorption.

Residence time distribution in counter-current protein A affinity chromatography using an inert tracer.

The trend in the biopharmaceutical industry is changing from batch process to continuous process. For continuous biomanufacturing, traceability of the material is required by regulatory authorities. The recent ICH draft guideline Q13 on continuous manufacturing of drug substances and drug products requests an "understanding of process dynamics as a function of input material attributes (e.g., potency, material flow properties), process conditions (e.g., mass flow rates) … One common approach is characterization of residence time distribution (RTD) for the individual unit operations and integrated system." Thus, it is necessary to trace material through individual continuous unit operations and the integrated process. The RTD of a process is obtained experimentally by injecting a pulse of an inert tracer into the inlet and measuring the broadening of the injected pulse in the outlet. We investigated the RTD of three-column periodic counter-current chromatography (PCC) using staphylococcal protein A affinity chromatography, with a focus on how the material distributes over subsequent cycles. A fluorescent-labeled antibody was used as the inert tracer under high salt concentration. The tracer was injected once in each run but at different points of the loading phase. We then analyzed the outlet of the column. In the elution phase, regardless of the point of injection, we observed an even distribution of the tracer. In the loading phase, a constant exchange between the antibody in the solid phase and the liquid phase was observed, meaning that sending the outlet of one chromatography column into another column to improve resin utilization causes higher residence time in the system for some portion of the material.

Model predictive control for steady-state performance in integrated continuous bioprocesses.

Perfusion bioreactors are commonly used for the continuous production of monoclonal antibodies (mAb). One potential benefit of continuous bioprocessing is the ability to operate under steady-state conditions for an extended process time. However, the process performance is often limited by the feedback control of feed, harvest, and bleed flow rates. If the future behavior of a bioprocess can be adequately described, predictive control can reduce set point deviations and thereby maximize process stability. In this study, we investigated the predictive control of biomass in a perfusion bioreactor integrated to a non-chromatographic capture step, in a series of Monte-Carlo simulations. A simple algorithm was developed to estimate the current and predict the future viable cell concentrations (VCC) of the bioprocess. This feature enabled the single prediction controller (SPC) to compensate for process variations that would normally be transported to adjacent units in integrated continuous bioprocesses (ICB). Use of this SPC strategy significantly reduced biomass, product concentration, and harvest flow variability and stabilized the operation over long periods of time compared to simulations using feedback control strategies. Additionally, we demonstrated the possibility of maximizing product yields simply by adjusting perfusion control strategies. This method could be used to prevent savings in total product losses of 4.5-10% over 30 days of protein production.