RESUMEN
The 2017-2019 hourly particle number size distributions (PNSD) from 26 sites in Europe and 1 in the US were evaluated focusing on 16 urban background (UB) and 6 traffic (TR) sites in the framework of Research Infrastructures services reinforcing air quality monitoring capacities in European URBAN & industrial areaS (RI-URBANS) project. The main objective was to describe the phenomenology of urban ultrafine particles (UFP) in Europe with a significant air quality focus. The varying lower size detection limits made it difficult to compare PN concentrations (PNC), particularly PN10-25, from different cities. PNCs follow a TR > UB > Suburban (SUB) order. PNC and Black Carbon (BC) progressively increase from Northern Europe to Southern Europe and from Western to Eastern Europe. At the UB sites, typical traffic rush hour PNC peaks are evident, many also showing midday-morning PNC peaks anti-correlated with BC. These peaks result from increased PN10-25, suggesting significant PNC contributions from nucleation, fumigation and shipping. Site types to be identified by daily and seasonal PNC and BC patterns are: (i) PNC mainly driven by traffic emissions, with marked correlations with BC on different time scales; (ii) marked midday/morning PNC peaks and a seasonal anti-correlation with PNC/BC; (iii) both traffic peaks and midday peaks without marked seasonal patterns. Groups (ii) and (iii) included cities with high insolation. PNC, especially PN25-800, was positively correlated with BC, NO2, CO and PM for several sites. The variable correlation of PNSD with different urban pollutants demonstrates that these do not reflect the variability of UFP in urban environments. Specific monitoring of PNSD is needed if nanoparticles and their associated health impacts are to be assessed. Implementation of the CEN-ACTRIS recommendations for PNSD measurements would provide comparable measurements, and measurements of <10 nm PNC are needed for full evaluation of the health effects of this size fraction.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Material Particulado/análisis , Contaminantes Atmosféricos/análisis , Emisiones de Vehículos/análisis , Tamaño de la Partícula , Monitoreo del Ambiente , Contaminación del Aire/análisis , Europa (Continente) , Ciudades , HollínRESUMEN
OBJECTIVES: Particulate air pollution is linked to adverse cardiovascular effects, including arterial stiffness. The aim of the study was to investigate the effect of short-term exposure to indoor fine and ultrafine particles on augmentation index (AIx), augmentation pressure (AP), and pulse wave velocity (PWV), early signs of vascular damage. METHODS: We analyzed the association of particle emissions from typical indoor sources (candle burning - CB, toasting bread - TB, and frying sausages - FS) with changes in pulse wave analysis indices in 55 healthy adults in a randomized cross-over controlled exposure study. Particle mass concentration (PMC), size-specific particle number concentration (PNC) and lung-deposited particle surface area concentration (PSC) were measured during the 2â¯h exposure. AIx and AP were measured before, directly, 2, 4 and 24â¯h after exposure. PWV was measured directly and 24â¯h after exposure. We performed multiple mixed linear regression analyses of different particle metrics and AIx, AP and PWV. RESULTS: The highest mean PMC was observed during FS reaching a maximum of 210⯵g/m3 PM10. The maximal PNC for UFP <100â¯nm was reached during CB with 2.3 million particles/cm3. PSC was similar across all three exposures (about 3000⯵m2/cm³). Strongest associations between different particles metrics and arterial stiffness indices could be observed for UFP from CB and FS and for PMC from TB. The highest mean increase could be observed for the UFP fraction <10â¯nm, measured during CB, and AIx with an increase of 9.5%-points (95%-CI: 3.1; 15.9). PSC seemed to follow the pattern of PNC. PM10 and PM2.5 from TB led to clear changes in AIx with biggest increases for PM10 of 5.8%-points (95%-CI: 3.2; 8.4) 2â¯h after exposure and for PM2.5 of 8.1%-points (95%-CI: 2.5; 13.7) directly after exposure. CONCLUSIONS: Our study indicates effects of indoor exposure to fine and ultrafine particles on systemic arterial stiffness indices that depend on the indoor source as well as on particle metric. Differences in size-specific physical characteristics of source-specific particles might account for these differential effects. We did not observe clear and stable associations of indoor particle exposure and PWV.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Exposición a Riesgos Ambientales/análisis , Material Particulado/análisis , Rigidez Vascular , Adolescente , Adulto , Culinaria , Femenino , Voluntarios Sanos , Humanos , Masculino , Persona de Mediana Edad , Tamaño de la Partícula , Análisis de la Onda del Pulso , Adulto JovenRESUMEN
Personal monitors based on unipolar diffusion charging (miniDiSC/DiSCmini, NanoTracer, Partector) can be used to assess the individual exposure to nanoparticles in different environments. The charge acquired by the aerosol particles is nearly proportional to the particle diameter and, by coincidence, also nearly proportional to the alveolar lung-deposited surface area (LDSA), the metric reported by all three instruments. In addition, the miniDiSC/DiSCmini and the NanoTracer report particle number concentration and mean particle size. In view of their use for personal exposure studies, the comparability of these personal monitors was assessed in two measurement campaigns. Altogether 29 different polydisperse test aerosols were generated during the two campaigns, covering a large range of particle sizes, morphologies and concentrations. The data provided by the personal monitors were compared with those obtained from reference instruments: a scanning mobility particle sizer (SMPS) for LDSA and mean particle size and a ultrafine particle counter (UCPC) for number concentration. The results indicated that the LDSA concentrations and the mean particle sizes provided by all investigated instruments in this study were in the order of ±30% of the reference value obtained from the SMPS when the particle sizes of the test aerosols generated were within 20-400nm and the instruments were properly calibrated. Particle size, morphology and concentration did not have a major effect within the aforementioned limits. The comparability of the number concentrations was found to be slightly worse and in the range of ±50% of the reference value obtained from the UCPC. In addition, a minor effect of the particle morphology on the number concentration measurements was observed. The presence of particles >400nm can drastically bias the measurement results of all instruments and all metrics determined.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Monitoreo del Ambiente/instrumentación , Nanopartículas/análisis , Exposición Profesional/análisis , Dispositivos Electrónicos Vestibles , Aerosoles , Humanos , Tamaño de la Partícula , Lugar de TrabajoRESUMEN
OBJECTIVES: Particulate air pollution is linked to adverse cardiovascular effects. The aim of the study was to investigate the effect of short-term exposure to indoor particles on blood pressure (BP). METHODS: We analyzed the association of particle emissions from indoor sources (candle burning, toasting bread, frying sausages) with BP changes in 54 healthy volunteers in a randomized cross-over controlled exposure study. Particle mass concentration (PMC), size-specific particle number concentration (PNC) and lung-deposited particle surface area concentration (PSC) were measured during the 2h exposure. Systolic and diastolic blood pressure were measured before, during, directly, 2, 4 and 24h after exposure. We performed multiple mixed linear regression analyses of different particle metrics and BP. RESULTS: BP significantly increased with increasing PMC, PSC and PNC resulting from toasting bread. For example, an increase per 10µg/m3 PM10 and PM2.5, systolic BP increased at all time points with largest changes 1h after exposure initiation of 1.5mmHg (95%-CI: 1.1; 1.9) and of 2.2mmHg (95%-CI: 1.3; 3.1), respectively. CONCLUSIONS: Our study suggests an association of short-term exposure to fine and ultrafine particles emitted from toasting bread with increases in BP. Particles emitted from frying sausages and candle burning did not consistently affect BP.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior/análisis , Presión Sanguínea , Exposición a Riesgos Ambientales , Material Particulado/análisis , Adulto , Anciano , Culinaria , Monitoreo del Ambiente , Europa (Continente) , Femenino , Voluntarios Sanos , Humanos , Pulmón , Masculino , Persona de Mediana Edad , Tamaño de la Partícula , Adulto JovenRESUMEN
Exposure to airborne agents needs to be assessed in the personal breathing zone by the use of personal measurement equipment. Specific measurement devices for assessing personal exposure to airborne nanomaterials have only become available in the recent years. They can be differentiated into direct-reading personal monitors and personal samplers that collect the airborne nanomaterials for subsequent analyses. This article presents a review of the available personal monitors and samplers and summarizes the available literature regarding their accuracy, comparability and field applicability. Due to the novelty of the instruments, the number of published studies is still relatively low. Where applicable, literature data is therefore complemented with published and unpublished results from the recently finished nanoIndEx project. The presented data show that the samplers and monitors are robust and ready for field use with sufficient accuracy and comparability. However, several limitations apply, e.g. regarding the particle size range of the personal monitors and their in general lower accuracy and comparability compared with their stationary counterparts. The decision whether a personal monitor or a personal sampler shall be preferred depends strongly on the question to tackle. In many cases, a combination of a personal monitor and a personal sampler may be the best choice to obtain conclusive results.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Monitoreo del Ambiente , Exposición por Inhalación/análisis , Nanoestructuras/análisis , Exposición Profesional/análisis , Humanos , Tamaño de la Partícula , Lugar de TrabajoRESUMEN
For exposure and risk assessment in occupational settings involving engineered nanomaterials (ENMs), it is important to understand the mechanisms of release and how they are influenced by the ENM, the matrix material, and process characteristics. This review summarizes studies providing ENM release information in occupational settings, during different industrial activities and using various nanomaterials. It also assesses the contextual information - such as the amounts of materials handled, protective measures, and measurement strategies - to understand which release scenarios can result in exposure. High-energy processes such as synthesis, spraying, and machining were associated with the release of large numbers of predominantly small-sized particles. Low-energy processes, including laboratory handling, cleaning, and industrial bagging activities, usually resulted in slight or moderate releases of relatively large agglomerates. The present analysis suggests that process-based release potential can be ranked, thus helping to prioritize release assessments, which is useful for tiered exposure assessment approaches and for guiding the implementation of workplace safety strategies. The contextual information provided in the literature was often insufficient to directly link release to exposure. The studies that did allow an analysis suggested that significant worker exposure might mainly occur when engineering safeguards and personal protection strategies were not carried out as recommended.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Nanoestructuras/química , Exposición Profesional/análisis , Humanos , Industrias , Medición de Riesgo , Lugar de TrabajoRESUMEN
Particulate air pollution is linked to impaired respiratory health. We analyzed particle emissions from common indoor sources (candles burning (CB), toasting bread (TB), frying sausages (FS)) and lung function in 55 healthy volunteers (mean age 33.0 years) in a randomized cross-over controlled exposure study. Lung-deposited particle surface area concentration (PSC), size-specific particle number concentration (PNC) up to 10 µm, and particle mass concentration (PMC) of PM1, PM2.5 and PM10 were determined during exposure (2 h). FEV1, FVC and MEF25%-75% was measured before, 4 h and 24 h after exposure. Wilcoxon-rank sum tests (comparing exposure scenarios) and mixed linear regression using particle concentrations and adjusting for personal characteristics, travel time and transportation means before exposure sessions were performed. While no effect was seen comparing the exposure scenarios and in the unadjusted model, inverse associations were found for PMC from CB and FS in relation to FEV1 and MEF25%-75%. with a change in 10 µg/m3 in PM2.5 from CB being associated with a change in FEV1 of -19 mL (95%-confidence interval:-43; 5) after 4 h. PMC from TB and PNC of UFP were not associated with lung function changes, but PSC from CB was. Elevated indoor fine particles from certain sources may be associated with small decreases in lung function in healthy adults.
Asunto(s)
Contaminantes Atmosféricos/toxicidad , Contaminación del Aire Interior/efectos adversos , Material Particulado/toxicidad , Adolescente , Adulto , Estudios Cruzados , Femenino , Volumen Espiratorio Forzado , Voluntarios Sanos , Humanos , Masculino , Flujo Espiratorio Máximo , Persona de Mediana Edad , Tamaño de la Partícula , Capacidad Vital , Adulto JovenRESUMEN
Five different portable instrument types to monitor exposure to nanoparticles were subject to an intensive intercomparison measurement campaign. Four of them were based on electrical diffusion charging to determine the number concentration or lung deposited surface area (LDSA) concentration of airborne particles. Three out of these four also determined the mean particle size. The fifth instrument type was a handheld condensation particle counter (CPC). The instruments were challenged with three different log-normally distributed test aerosols with modal diameters between 30 and 180 nm, varying in particle concentration and morphology. The CPCs showed the highest comparability with deviations on the order of only ±5%, independent of the particle sizes, but with a strictly limited upper number concentration. The diffusion charger-based instruments showed comparability on the order of ±30% for number concentration, LDSA concentration, and mean particle size, when the specified particle size range of the instruments matched the size range of the aerosol particles, whereas significant deviations were found when a large amount of particles exceeded the upper or lower detection limit. In one case the reported number concentration was even increased by a factor of 6.9 when the modal diameter of the test aerosol exceeded the specified upper limit of the instrument. A general dependence of the measurement accuracy of all devices on particle morphology was not detected.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Monitoreo del Ambiente/instrumentación , Exposición por Inhalación/análisis , Ensayo de Materiales/estadística & datos numéricos , Nanopartículas/análisis , Tamaño de la Partícula , Aerosoles/análisis , Calibración , Ácidos Decanoicos/análisis , Monitoreo del Ambiente/métodos , Monitoreo del Ambiente/normas , Humanos , Límite de Detección , Pulmón/fisiología , Ensayo de Materiales/métodos , Modelos Biológicos , Exposición Profesional/análisis , Análisis de Regresión , Cloruro de Sodio/análisis , Hollín/análisisRESUMEN
OBJECTIVE: In this study, the effect of short-term exposure to welding fumes emitted by different welding techniques on workers was investigated. METHODS: In a 3-fold crossover study, six welders used three different welding techniques for 3 hours. Before and after welding, blood and urine samples were collected to perform biomonitoring of metals. Breath condensate was collected to assess inflammatory reactions, and lung function measurements were performed. RESULTS: Welding led to a significant increase of chromium and nickel in blood and urine and of nitrate and nitrite in exhaled breath condensate. These increases were higher for manual metal arc welding with alloyed material (MAW-a). Several lung function parameters decreased after welding. This decrease was significantly higher after MAW-a. CONCLUSIONS: In respect to biological effects, MAW-a seems to be more important than other welding techniques.