RESUMEN
The motivation behind this research is the lack of an underground mining shaft data set in the literature in the form of open access. For this reason, our data set can be used for many research purposes such as shaft inspection, 3D measurements, simultaneous localization and mapping, artificial intelligence, etc. The data collection method incorporates rotated Velodyne VLP-16, Velodyne Ultra Puck VLP-32c, Livox Tele-15, IMU Xsens MTi-30 and Faro Focus 3D. The ground truth data were acquired with a geodetic survey including 15 ground control points and 6 Faro Focus 3D terrestrial laser scanner stations of a total 273,784,932 of 3D measurement points. This data set provides an end-user case study of realistic applications in mobile mapping technology. The goal of this research was to fill the gap in the underground mining data set domain. The result is the first open-access data set for an underground mining shaft (shaft depth -300 m).
RESUMEN
The properties and concentrations of deep-level defects induced by implantations of Si and Mg ions into unintentionally doped (UID) epitaxial GaN have been revealed by using the Laplace-transform photoinduced transient spectroscopy (LPITS) and molecular dynamics (MD) calculations. The material lattice damage, produced by the Si ions implanted at room temperature in the single process at the energies of 200 and 340 keV, is compared with that produced by the Mg ions implanted in the similar process at the energies of 150, 210, and 270 keV. The LPITS results indicate that the same deep traps with the activation energies of 396, 512, 531, 587, 635, and 736 meV are present in the tail regions of the semi-insulating Si- and Mg-implanted films. It is argued that the predominant implantation-induced point defects in the tail region of the Si-implanted films are nitrogen vacancies, whose concentration is 7.7 × 1017 cm-3. In the Mg-implanted films, the predominant implantation-induced point defects are gallium interstitials, whose concentration is 1.2 × 1 018 cm-3.
RESUMEN
Objectives: The purpose of this paper is to assess the determination of male and female sex from trabecular bone structures in the pelvic region. The study involved analyzing digital radiographs for 343 patients and identifying fourteen areas of interest based on their medical significance, with seven regions on each side of the body for symmetry. Methods: Textural parameters for each region were obtained using various methods, and a thorough investigation of data normalization was conducted. Feature selection approaches were then evaluated to determine a small set of the most representative features, which were input into several classification machine learning models. Results: The findings revealed a sex-dependent correlation in the bone structure observed in X-ray images, with the degree of dependency varying based on the anatomical location. Notably, the femoral neck and ischium regions exhibited distinctive characteristics between sexes. Conclusions: This insight is crucial for medical professionals seeking to estimate sex dependencies from such image data. For these four specific areas, the balanced accuracy exceeded 70%. The results demonstrated symmetry, confirming the genuine dependencies in the trabecular bone structures.
RESUMEN
The formation of intrinsic point defects in the N-sublattice of semi-insulating Mg-doped GaN crystals grown by the ammonothermal method (SI AT GaN:Mg) was investigated for the first time. The grown-in defects produced by the displacement of nitrogen atoms were experimentally observed as deep traps revealed by the Laplace transform photoinduced transient spectroscopy in the compensated p-type crystals with the Mg concentrations of 6 × 1018 and 2 × 1019 cm-3 and resistivities of ~1011 Ωcm and ~106 Ωcm, respectively. In both kinds of materials, three closely located traps with activation energies of 430, 450, and 460 meV were revealed. The traps, whose concentrations in the stronger-doped material were found to be significantly higher, are assigned to the (3+/+) and (2+/+) transition levels of nitrogen vacancies as well as to the (2+/+) level of nitrogen split interstitials, respectively. In the material with the lower Mg concentration, a middle-gap trap with the activation energy of 1870 meV was found to be predominant. The results are confirmed and quantitatively described by temperature-dependent Hall effect measurements. The mechanism of nitrogen atom displacement due to the local strain field arising in SI AT GaN:Mg is proposed and the effect of the Mg concentration on the charge compensation is discussed.
RESUMEN
Injuries to the articular cartilage of the human knee joint, commonly resulting from trauma, inflammation, or age- and activity-related wear and tear, have significant implications, primarily leading to osteoarthritis (OA). Conservative treatments for such injuries often yield suboptimal clinical outcomes. Surgical interventions using current methods may not consistently provide satisfactory results, largely due to the formation of low-quality scar tissue lacking the biomechanical properties of hyaline cartilage. In this retrospective study, we compared the results of two promising methods for regenerating cartilage defects in the knee joints using scaffolds soaked with stem cells of different origins: bone marrow aspirate concentrate mesenchymal stem cells (BMAC-MSCs) and human umbilical cord-derived mesenchymal stem cells (hUCB-MSCs). We evaluated 39 patients (39 knees, hUCB-MSCs: 20 knees, BMAC: 19 knees) at the 12-month follow-up using VAS, KOOS, Lysholm scales and radiologically with M-MOCART 2.0 score. The analysis demonstrated substantial overall improvement in both groups, notably reflected in enhanced quality of life for the patients. Interestingly, the final scores in the hUCB-MSCs group were comparable to those in the BMAC-MSCs group, with no statistically significant differences observed, despite variations in preoperative age and lesion size. Notably, the hUCB-MSCs group consisted of significantly older individuals with larger lesion sizes. Both procedures were found to be safe, and improvement was observed in both groups, which holds promise for future clinical investigations.
RESUMEN
This article addresses the issue of the durability of mining shaft equipment elements. Shafts as a transport route are one of the most exploited parts of a mine. Consequently, their components are exposed to high mechanical stresses, which cause the deterioration of their mechanical properties. In the case of shafts with timber components, elements such as the shaft guides are evaluated on a purely macroscopic basis and are often unnecessarily replaced. This paper presents the possibilities for the application of non-destructive methods (ultrasound and laser scanning) and semi-destructive methods (sclerometric and drill resistance tests). The experimental results suggest that it was possible to derive correlations between penetration depth and drill resistance tests with bulk density. However, these tests were not directly correlated with flexural strength. The ultrasound studies did not indicate a significant relationship with the physical or mechanical properties. In contrast, the method of comparing the variation (wear) in the tested guides using 3D laser scanning demonstrated a high accuracy; moreover, this method is independent of factors that may affect the results of penetration depth or drill resistance measurements. The application of non-destructive and semi-destructive tests for the determination of the physical and mechanical properties of timber elements of mine shafts' equipment may enable the detection of a defect earlier or extend the service life of elements, hence limiting the downtime of shaft operation related to the replacement of elements.
RESUMEN
Femoral neck fractures are one of the most common fractures in the elderly population. Due to frequent complications of the fixation of these fractures, patients are more and more often eligible for hip replacement surgery. One of the most frequently mentioned postoperative complication is the formation of heterotopic ossification. This case report describes as a 70-year-old male patient that presented with an old hip fracture accompanied by a mild craniocerebral trauma. The patient underwent total cementless hip arthroplasty followed by rehabilitation. At 8 months after surgery, the patient was diagnosed with Brooker IV° heterotopic ossification in the area of the operated hip joint. Due to the persistent pain and complete loss of mobility in the operated joint, computed tomography imaging was performed and the patient was recommended for a revision surgery. The procedure was performed 14 months after the original surgical treatment, resulting in a significant improvement in the range of motion and reduction of pain.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Fracturas del Cuello Femoral , Osificación Heterotópica , Anciano , Artroplastia de Reemplazo de Cadera/efectos adversos , Humanos , Masculino , Osificación Heterotópica/diagnóstico por imagen , Osificación Heterotópica/etiología , Osificación Heterotópica/cirugía , Dolor/etiología , Complicaciones Posoperatorias/etiología , Factores de RiesgoRESUMEN
Recently, research has centered on developing new approaches, such as supervised machine learning techniques, that can compute the mechanical characteristics of materials without investing much effort, time, or money in experimentation. To predict the 28-day compressive strength of steel fiber-reinforced concrete (SFRC), machine learning techniques, i.e., individual and ensemble models, were considered. For this study, two ensemble approaches (SVR AdaBoost and SVR bagging) and one individual technique (support vector regression (SVR)) were used. Coefficient of determination (R2), statistical assessment, and k-fold cross validation were carried out to scrutinize the efficiency of each approach used. In addition, a sensitivity technique was used to assess the influence of parameters on the prediction results. It was discovered that all of the approaches used performed better in terms of forecasting the outcomes. The SVR AdaBoost method was the most precise, with R2 = 0.96, as opposed to SVR bagging and support vector regression, which had R2 values of 0.87 and 0.81, respectively. Furthermore, based on the lowered error values (MAE = 4.4 MPa, RMSE = 8 MPa), statistical and k-fold cross validation tests verified the optimum performance of SVR AdaBoost. The forecast performance of the SVR bagging models, on the other hand, was equally satisfactory. In order to predict the mechanical characteristics of other construction materials, these ensemble machine learning approaches can be applied.
RESUMEN
Researchers and engineers are presently focusing on efficient waste material utilization in the construction sector to reduce waste. Waste marble dust has been added to concrete to minimize pollution and landfills problems. Therefore, marble dust was utilized in concrete, and its prediction was made via an artificial intelligence approach to give an easier way to scholars for sustainable construction. Various blends of concrete having 40 mixes were made as partial substitutes for waste marble dust. The ultrasonic pulse velocity of waste marble dust concrete (WMDC) was compared to a control mix without marble dust. Additionally, this research used standalone (multiple-layer perceptron neural network) and supervised machine learning methods (Bagging, AdaBoost, and Random Forest) to predict the ultrasonic pulse velocity of waste marble dust concrete. The models' performances were assessed using R2, RMSE, and MAE. Then, the models' performances were validated using k-fold cross-validation. Furthermore, the effect of raw ingredients and their interactions using SHAP analysis was evaluated. The Random Forest model, with an R2 of 0.98, outperforms the MLPNN, Bagging, and AdaBoost models. Compared to all the other models (individual and ensemble), the Random Forest model with greater R2 and lower error (RMSE, MAE) has a superior performance. SHAP analysis revealed that marble dust content has a positive and direct influence on and relationship to the ultrasonic pulse velocity of concrete. Using machine learning to forecast concrete properties saves time, resources, and effort for scholars in the engineering sector.
RESUMEN
In civil engineering, ultra-high-strength concrete (UHSC) is a useful and efficient building material. To save money and time in the construction sector, soft computing approaches have been used to estimate concrete properties. As a result, the current work used sophisticated soft computing techniques to estimate the compressive strength of UHSC. In this study, XGBoost, AdaBoost, and Bagging were the employed soft computing techniques. The variables taken into account included cement content, fly ash, silica fume and silicate content, sand and water content, superplasticizer content, steel fiber, steel fiber aspect ratio, and curing time. The algorithm performance was evaluated using statistical metrics, such as the mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The model's performance was then evaluated statistically. The XGBoost soft computing technique, with a higher R2 (0.90) and low errors, was more accurate than the other algorithms, which had a lower R2. The compressive strength of UHSC can be predicted using the XGBoost soft computing technique. The SHapley Additive exPlanations (SHAP) analysis showed that curing time had the highest positive influence on UHSC compressive strength. Thus, scholars will be able to quickly and effectively determine the compressive strength of UHSC using this study's findings.
RESUMEN
Aberrant activity of the phosphatidylinositol-3 kinase/protein kinase B/mammalian target of rapamycin (PI3K/AKT/mTOR [PAM]) pathway, as well as suppressed retinoic acid signalling, contribute to enhanced proliferation and the differentiation blockade of immature myeloid cells in acute myeloid leukaemia (AML). Inhibition of the PAM pathway was shown to affect especially mixed-lineage leukaemia-rearranged AML. Here, we sought to test a combined strategy using small molecule inhibitors against members of the PAM signalling pathway in conjunction with all-trans retinoic acid (ATRA) to target a larger group of different AML subtypes. We find that ATRA treatment in combination with inhibition of PI3K (ZSTK474), mTOR (WYE132) or PI3K/mTOR (BEZ235, dactolisib) drastically reduces protein levels of the proto-oncogene MYC. In combination with BEZ235, ATRA treatment led to almost complete eradication of cellular MYC, G1 arrest, loss of clonal capacity and terminal granulocytic differentiation. We demonstrate that PAM inhibitor/ATRA treatment targets MYC via independent mechanisms. While inhibition of the PAM pathway causes MYC phosphorylation at threonine 58 via glycogen synthase kinase 3 beta and subsequent degradation, ATRA reduces its expression. Here, we present an approach using a combination of known drugs to synergistically reduce aberrant MYC levels, thereby effectively blocking proliferation and enabling differentiation in various AML subtypes.
Asunto(s)
Leucemia Mieloide Aguda , Proteínas Proto-Oncogénicas c-akt , Línea Celular Tumoral , Proliferación Celular , Humanos , Leucemia Mieloide Aguda/tratamiento farmacológico , Leucemia Mieloide Aguda/metabolismo , Fosfatidilinositol 3-Quinasas/metabolismo , Proteínas Proto-Oncogénicas c-akt/metabolismo , Serina-Treonina Quinasas TOR , Tretinoina/farmacología , Tretinoina/uso terapéuticoRESUMEN
Hysteroscopy is the gold standard for the diagnosis and treatment of endometrial polyps. For small polyps (less than 2 cm) minihysteroscopy can be performed in an office setting. Patients with polyps larger than 2 cm are usually referred for a standard resectoscope procedure in the operation room (OR) under general anaesthesia. Those patients are exposed to longer hospital stay and possible complications of the anaesthesia. Furthermore, they usually have longer contact with many medical staff members. Limiting the time of contact as well as the number of staff involved in the procedure is particularly important during the COVID-19 pandemic. For this reason, minihysteroscopy in an office setting should be the first choice in every possible indication. We present the methods that may be useful for removing even large polyps in minihysteroscopy. The advantages and disadvantages of every procedure are discussed.
RESUMEN
PURPOSE: Loss of function variants of the transient receptor potential cation channel, subfamily V, member 6 (TRPV6) have been recently associated with chronic pancreatitis (CP) in Japanese, German and French patients. Here, we investigated the association of TRPV6 variants with CP in independent European cohorts of early-onset CP patients from Poland and Germany. PATIENTS AND METHODS: We enrolled 152 pediatric CP patients (median age 8.6 yrs) with no history of alcohol/smoking abuse and 472 controls from Poland as well as 157 nonalcoholic young CP patients (median age 20 yrs) and 750 controls from Germany. Coding regions of TRPV6 were screened by Sanger and next generation sequencing. Selected, potentially pathogenic TRPV6 variants were expressed in HEK293T cells and TRPV6 activity was analyzed using ratiometric Ca2+ measurements. RESULTS: Overall, we identified 10 novel (3 nonsense and 7 missenses) TRPV6 variants in CP patients. TRPV6 p.V239SfsX53 nonsense variant and the variants showing significant decrease in intracellular Ca2+ concentration in HEK293T cells (p.R174X, p.L576R, p.R342Q), were significantly overrepresented in Polish patients as compared to controls (6/152, 3.9% vs. 0/358, 0%; P = 0,0007). Nonsense TRPV6 variants predicted as loss of function (p.V239SfsX53 and p.R624X) were also significantly overrepresented in German patients (3/157; 2.0% vs 0/750; 0%, P = 0.005). CONCLUSIONS: We showed that TRPV6 loss of function variants are associated with elevated CP risk in early-onset Polish and German patients confirming that TRPV6 is a novel CP susceptibility gene.
Asunto(s)
Pancreatitis Crónica , Adulto , Canales de Calcio/genética , Niño , Alemania/epidemiología , Células HEK293 , Humanos , Pancreatitis Crónica/genética , Polonia/epidemiología , Canales Catiónicos TRPV/genética , Adulto JovenRESUMEN
Due to an increasing number of cesarean section deliveries, the common consequences of that surgery are observed more often in the population. One of them is the uterine cesarean scar defect known as niche or isthmocele. Most patients with that aliment are asymptomatic, but some of them can report abnormal uterine bleeding, pelvic pain, subfertility which can be the reason for reduced quality of life (QoL) of the patients. In our study, we analyzed the subjective feelings of changes in the severity of symptoms and quality of life of women with niche after diagnostic and operative hysteroscopy. The patients n = 85 included in the study group completed a follow up questionnaire six months after the procedure. Patients after operative hysteroscopy in comparison to patients after diagnostic procedure reported statistically significant reduction in post-menstruation bleeding/spotting and improvement in the quality of sexual activity. We have also noticed a higher pregnancy rate in the operative group, however, the difference was not statistically significant. According to our study, most women reported a positive effect of hysteroscopy on their QoL in social, psychological, environmental, and health domains.
RESUMEN
The pathogenesis of many serious diseases, including cancer, is closely related to disturbances in the angiogenesis process. Angiogenesis is essential for the progression of tumor growth and metastasis. The tumor microenvironment (TME) has immunosuppressive properties, which contribute to tumor expansion and angiogenesis. Similarly, the uterine microenvironment (UME) exerts a tolerogenic (immunosuppressive) and proangiogenic effect on its cells, promoting implantation and development of the embryo and placenta. In the TME and UME natural killer (NK) cells, which otherwise are capable of killing target cells autonomously, enter a state of reduced cytotoxicity or anergy. Both TME and UME are rich with factors (e.g., TGF-ß, glycodelin, hypoxia), which support a conversion of NK cells to the low/non-cytotoxic, proangiogenic CD56brightCD16low phenotype. It is plausible that the phenomenon of acquiring proangiogenic and low cytotoxic features by NK cells is not only limited to cancer but is a common feature of different angiogenesis-dependent diseases (ADDs). In this review, we will discuss the role of NK cells in angiogenesis disturbances associated with cancer and other selected ADDs. Expanding the knowledge of the mechanisms responsible for angiogenesis and its disorders contributes to a better understanding of ADDs and may have therapeutic implications.
Asunto(s)
Células Asesinas Naturales/inmunología , Neoplasias/irrigación sanguínea , Neoplasias/inmunología , Neovascularización Patológica/inmunología , Humanos , Modelos Biológicos , Microambiente TumoralRESUMEN
Endometriosis is a common gynecological disorder characterized by the ectopic growth of endometrial-like tissue outside the uterine cavity. Etiopathogenesis of endometriosis is poorly understood; it is plausible, however, that the disease may be associated with oxidative stress related to local heme and iron metabolism. Therefore, the aim of the study was to reveal a possible association of endometriosis with a stress-inducible heme oxygenase 1 (HMOX1). For this purpose, 228 patients with clinically confirmed endometriosis and 415 control parous women from general Polish population were examined for functional -413A>T (rs2071746) single-nucleotide polymorphism (SNP) and (GT)n dinucleotide repeat length polymorphism in the promoter of HMOX1 gene. In addition, -413A>T SNP was assessed by the specific TaqMan® SNP Genotyping Assay, and (GT)n polymorphism was determined by PCR product size analysis. We found that endometriosis is associated with an increased frequency of -413A(GT)31,32 haplotype (OR (95%CI) = 1.27 (1.01-1.60), p = 0.0381) and -413A(GT)31,32 homozygous genotype [OR (95%CI) = 1.51 (1.06-2.17), p = 0.0238]. These data suggest that endometriosis is associated with functional polymorphism of HMOX1 gene, and this gene may play a part in the pathogenesis of this disorder.
Asunto(s)
Endometriosis/genética , Estudios de Asociación Genética , Predisposición Genética a la Enfermedad , Hemo-Oxigenasa 1/genética , Polimorfismo de Nucleótido Simple/genética , Regiones Promotoras Genéticas , Adulto , Estudios de Casos y Controles , Femenino , Frecuencia de los Genes/genética , Haplotipos/genética , Humanos , Persona de Mediana Edad , Adulto JovenRESUMEN
The retinoids are a group of compounds including vitamin A and its active metabolite all-trans-retinoic acid (ATRA). Retinoids regulate a variety of physiological functions in multiple organ systems, are essential for normal immune competence, and are involved in the regulation of cell growth and differentiation. Vitamin A derivatives have held promise in cancer treatment and ATRA is used in differentiation therapy of acute promyelocytic leukemia (APL). ATRA and other retinoids have also been successfully applied in a variety of dermatological conditions such as skin cancer, psoriasis, acne, and ichthyosis. Moreover, modulation of retinoic acid receptors and retinoid X (or rexinoid) receptors function may affect dermal cells. The studies using complex genetic models with various combinations of retinoic acid receptors (RARs) and retinoid X (or rexinoid) receptors (RXRs) indicate that retinoic acid and its derivatives have therapeutic potential for a variety of serious dermatological disorders including some malignant conditions. Here, we provide a synopsis of the main advances in understanding the role of ATRA and its receptors in dermatology.
Asunto(s)
Piel/efectos de los fármacos , Tretinoina/farmacología , Diferenciación Celular/efectos de los fármacos , Humanos , Leucemia Promielocítica Aguda/tratamiento farmacológico , Leucemia Promielocítica Aguda/metabolismo , Leucemia Promielocítica Aguda/patología , Receptores de Ácido Retinoico/metabolismo , Receptores X Retinoide/metabolismo , Transducción de Señal/efectos de los fármacos , Piel/citología , Piel/metabolismo , Neoplasias Cutáneas/tratamiento farmacológico , Neoplasias Cutáneas/metabolismo , Neoplasias Cutáneas/patología , Tretinoina/análogos & derivados , Tretinoina/metabolismo , Tretinoina/uso terapéuticoRESUMEN
INTRODUCTION: Hysteroscopy is the gold standard for diagnosis and treatment of uterine pathologies. The office setting seems to be safe, reducing the anesthesia risks and also decreasing the overall costs of the procedure. Recent literature suggests that hysteroscopy performed without anesthesia may not be as painless as it was previously considered. Moreover, not every patient can be referred for a hysteroscopy in an office setting. AIM: To analyze the factors correlated with a successful hysteroscopy in an office setting. MATERIAL AND METHODS: We analyzed the documentation of 1301 patients who underwent hysteroscopy at our department in the period 2013-2016. The impact of the type of the procedure and the various demographic factors on the need for general anesthesia was assessed. RESULTS: Almost 80% of all hysteroscopies were performed without analgesia in an office setting. The remaining patients underwent a hysteroscopy in general anesthesia. The key aspect for successful office hysteroscopy is the scope of the performed surgery. Over 91% of diagnostic hysteroscopies have been done without analgesia, but only about 30% of extensive endometrial scratching procedures were performed in an office setting. A previous vaginal delivery increases the chances for a successful office hysteroscopy by about 21%, and in the case of diagnostic procedures, multiparous patients were at an about 79% lower risk of analgesia necessity. CONCLUSIONS: It is possible to perform nearly all diagnostic hysteroscopies in an office setting. In the case of operative hysteroscopy, the most crucial factor is the scope of the procedure.
RESUMEN
BACKGROUND The aim of this study was to compare the level of functional condition in patients who had rehabilitation with the comprehensive early rehabilitation program (CERP) following either single bundle (SB) or double bundle (DB) anterior cruciate ligament reconstruction (ACLR) using semitendinosus-gracilis tendon graft (ST-G) method. We hypothesized that 12 weeks after reconstruction followed by a rehabilitation program, there would be a difference in clinical results and functional activity between patients. MATERIAL AND METHODS This study included 94 patients who had rehabilitation with CERP after knee surgery for a knee injury from a recreational sport. There were 49 patients in Group 1 (mean age, 36.5 years) who had CERP after SB ACLR, and 45 patients in Group 2 (mean age, 35.6 years) who had CERP after DB ACLR. Functional condition was tested using the Lysholm Knee Scoring Scale, and knee stability was measured using KT-2000. The first examination was performed before CERP and the second examination was performed 12 weeks later. RESULTS The level of functional condition in both groups was similar before rehabilitation with CERP, with no significant difference (P<0.958) and was considered relatively low. In the second examination, 12 weeks after starting CERP, the patients improved in both groups. The improvement was larger in the SB ACLR Group 1 than in the DB ACLR Group 2. The difference was significant (P<0.005). However, the patients in Group 2 achieved better knee stability scores in the KT-2000 examination than the patients in Group 1. The difference was significant (P=0.035). CONCLUSIONS We found that the patients from both groups after 12 weeks of CERP achieved an improvement in stability and functional activity within normal limits. However, SB ACLR was more effective than DB ACLR in terms of the level of functionality achieved with CERP but was less effective in terms of knee stability.