Retention mechanisms of amitriptyline and its impurities on amide, amino, diol, and silica columns in hydrophilic interaction liquid chromatography.

Hydrophilic interaction liquid chromatography (HILIC) has been widely applied to challenging analysis in biomedical and pharmaceutical fields, bridging the gap between normal-phase high-performance liquid chromatography and reversed-phase high-performance liquid chromatography (RP-HPLC). This paper comprehensively explores the retention mechanisms of amitriptyline and its impurities A, B, C, D, F, and G on amide, amino, diol, and silica columns. Dual HILIC/RP-HPLC retention mechanisms were developed, and transitional points between HILIC and RP-HPLC mechanisms were calculated on amide, diol, and silica columns. Adsorption and partition contributions to overall retention mechanisms were evaluated using Python software in HILIC and RP-HPLC regions. The cation exchange mechanism dominates overall retention for ionized analytes in the silica column (R2 > 0.995), whereas the retention of ionized analytes increases with pH. Impacts of acetonitrile content, buffer ionic strength, and pH, along with their interactions on the retention of ionized analytes in the silica column, were determined using the chemometric approach. Acetonitrile content showed the most significant impact on the retention mechanisms. These findings highlight that a detailed investigation into retention mechanisms provides notable insights into factors influencing analyte retention and separation, promising valuable guidance for future analysis.

Analysis of Fixed-Dose Combination of Three Antihypertensive Drugs by a Green and Quality by Design Approach.

This paper presents the result of a combined employment of Analytical Quality-by-Design and Green Analytical Chemistry principles for the development of a robust high-performance liquid chromatography method for simultaneous determination of fixed-dose combination of three drugs, perindopril tert-butylamine, amlodipine besylate and indapamide. Optimum conditions were achieved on ZORBAX Eclipse XDB-C18 column (150 mm × 4.6 mm, 5 µm particle size), the mobile phase comprising acetonitrile and phosphate buffer (30 mM, pH 2.7) in the ratio 34:66 (v/v), the flow rate of 1 mL min-1, injection volume of 10 µL and UV detection at 210 nm. By assigning the design space from the overlay plot, the regions within which the robustness of the method is achieved were defined and confirmed by Dong's algorithm calculations. The proposed method was validated and shown to be applicable for the determination of the three drugs in commercially available tablets. In addition, the impact of the method on the environment was assessed through four different analytical tools: National Environmental Methods Index, Analytical Eco-Scale, Green Analytical Procedure Index and Assessment of Green Profile. The proposed method was determined to be greener, with minimal impact on the environment with regard to waste production, energy consumption and use of hazardous chemicals.

Quality by Design oriented development of hydrophilic interaction liquid chromatography method for the analysis of amitriptyline and its impurities.

This paper presents integration of Quality by Design concept in the development of hydrophilic interactions liquid chromatographic methods for analysis of amitriptyline and its impurities (A, B, C, and F). This is the first time that HILIC method for amitriptyline and its impurities is developed. Using QbD concept, it is possible to design a robust method and incorporate quality directly into its development. QbD concept in combination of Design of Experiments methodology (DoE) enables creation of well-defined design space. In this study, for method optimization a Box-Behnken design was used to test the effect of acetonitrile content, buffer concentration and pH of water phase on critical system responses such as retention factor of impurity A, resolution between impurity B and impurity C, amitriptyline peak asymmetry factor and retention time of last eluted impurity F. The defined mathematical models and Monte Carlo simulations were used to identify the design space. For robustness testing, fractional factorial design was applied. Optimal chromatographic conditions were the analytical column ZORBAX NH2 (250 mm x 4.6 mm, 5 µm particle size); mobile phase consisted of acetonitrile-water phase (60 mM ammonium acetate, pH adjusted to 4.5 with glacial acetic acid) (92.5:7.5 v/v); column temperature 30 °C, mobile phase flow rate 1 mL min-1, wavelength of detection 254 nm. Finally, method was fully validated and applicability of the method in tablet analysis was confirmed.