RESUMEN
Even though significant advances have been made, there is still a lack of reliable sensors capable of noninvasively monitoring bilirubin and diagnosing jaundice as the most common neonatal disease, particularly at the point-of-care (POC) where blood sampling from infants is accompanied by serious challenges and concerns. Herein, for the first time, using an easy-to-fabricate/use assay, we demonstrate the capability of curcumin embedded within paper for noninvasive optical monitoring of bilirubin in saliva. The highly selective sensing of the developed sensor toward bilirubin is attributed to bilirubin photoisomerization under blue light exposure, which can selectively restore the bilirubin-induced quenched fluorescence of curcumin. We also fabricated an IoT-enabled hand-held optoelectronic reader to measure and quantify the fluorescence and color signals of our sensor. Clinical analysis on the saliva of 18 jaundiced infants by using our developed smart salivary sensor proved that it is amenable to be widely exploited in POC applications for bilirubin monitoring as there are good correlations between its results with those of reference methods in saliva and blood. Meeting all WHO's REASSURED criteria by our developed sensor makes it a highly promising sensor for smart noninvasive diagnosis and therapeutic monitoring of jaundice, hepatitis, and other bilirubin-induced neurologic diseases at the POC.
Asunto(s)
Bilirrubina , Curcumina , Ictericia , Sistemas de Atención de Punto , Saliva , Humanos , Saliva/química , Bilirrubina/análisis , Bilirrubina/sangre , Ictericia/diagnóstico , Ictericia/sangre , Curcumina/química , Recién Nacido , Técnicas Biosensibles/métodos , Técnicas Biosensibles/instrumentación , LactanteRESUMEN
A new drug delivery system using an asymmetric polyethersulfone (PES) membrane modified by SBA-15 and glutamine-modified SBA-15 (SBA-Q) was prepared in this study by the aim of azithromycin delivery enhancement in both in vitro and ex vivo experiments. The research focused on optimizing membrane performance by adjusting critical parameters including drug concentration, membrane thickness, modifier percentage, polymer percentage, and pore maker percentage. To characterize the fabricated membranes, various techniques were employed, including scanning electron microscopy, water contact angle, and tensile strength assessments. Following optimization, membrane composition of 17% PES, 2% polyvinylpyrrolidone, 1% SBA-15, and 0.5% SBA-Q emerged as the most effective. The optimized membranes demonstrated a substantial increase in drug release (906 mg/L) compared to the unmodified membrane (440 mg/L). The unique membrane structure, with a dense top layer facilitating sustained drug release and a porous sub-layer acting as a drug reservoir, contributed to this improvement. Biocompatibility assessments, antibacterial activity analysis, blood compatibility tests, and post-diffusion tissue integrity evaluations confirmed the promising biocompatibility of the optimized membranes. Moreover, long-term performance evaluations involving ten repeated usages underscored the reusability of the optimized membrane, highlighting its potential for sustained and reliable drug delivery applications.
Asunto(s)
Antibacterianos , Sistemas de Liberación de Medicamentos , Membranas Artificiales , Polímeros , Dióxido de Silicio , Antibacterianos/administración & dosificación , Antibacterianos/farmacología , Antibacterianos/química , Dióxido de Silicio/química , Polímeros/química , Porosidad , Sulfonas/química , Sulfonas/administración & dosificación , Liberación de Fármacos , Animales , Azitromicina/administración & dosificación , Azitromicina/farmacocinética , Azitromicina/química , Azitromicina/farmacología , HumanosRESUMEN
Molecularly imprinted polymers (MIPs) are pivotal in medicine, mimicking biological receptors with enhanced specificity and affinity. Comprising templates, functional monomers, and cross-linkers, MIPs form stable three-dimensional polymer networks. Synthetic templates like glycan and aptamers improve efficiency, guiding the molecular imprinting process. Cross-linking determines MIPs' morphology and mechanical stability, with printable hydrogels offering biocompatibility and customizable properties, mimicking native extracellular matrix (ECM) microenvironments. Their versatility finds applications in tissue engineering, soft robotics, regenerative medicine, and wastewater treatment. In cancer research, MIPs excel in both detection and therapy. MIP-based detection systems exhibit superior sensitivity and selectivity for cancer biomarkers. They target nucleic acids, proteins, and exosomes, providing stability, sensitivity, and adaptability. In therapy, MIPs offer solutions to challenges like multidrug resistance, excelling in drug delivery, photodynamic therapy, photothermal therapy, and biological activity regulation. In microbiology, MIPs serve as adsorbents in solid-phase extraction (SPE), efficiently separating and enriching antibiotics during sample preparation. They contribute to bacterial identification, selectively capturing specific strains or species. MIPs aid in detecting antibiotic residues using fluorescent nanostructures and developing sensors for sulfadiazine detection in food samples. In summary, MIPs play a pivotal role in advancing medical technologies with enhanced sensitivity, selectivity, and versatility. Applications range from biomarker detection to innovative cancer therapies, making MIPs indispensable for the accurate determination and monitoring of diverse biological and environmental samples.
Asunto(s)
Antibacterianos , Polímeros Impresos Molecularmente , Neoplasias , Humanos , Polímeros Impresos Molecularmente/química , Neoplasias/diagnóstico , Antibacterianos/análisis , Medicina de Precisión/métodos , Impresión Molecular/métodos , Biomarcadores de TumorRESUMEN
Rapid control of the content of Parkinson's drugs in biological fluids and pharmaceutical formulations is of great importance because changes in the concentration of these drugs affect their bioavailability and biopharmaceutical properties. Therefore, we presented a simple and convenient method for the ratiometric detection of carbidopa and levodopa for carbon dots (CDs) dual-fluorescent emission. Dual-emission CDs were prepared from chitosan using a microwave method, following which the surface was chemically modified with terephthalaldehyde. CDs had two strong well-separated peaks at 445 and 510 nm. The relative measurement of carbidopa and levodopa was based on the static extinction of CDs at 445 nm and increase at 510 nm, respectively. The linear range for carbidopa measurement was 2.5-300 nM, with a limit of detection (LOD) of 2.1 nM, and a relative standard deviation (RSD) of 1.68%. Further, the linear range for levodopa measurement was equal to 3.0-400 nM, with LOD and RSD% of 2.8 nM and 3.5%, respectively. Also, selectivity of ratiometric sensor in the presence of interferences was investigated, which showed that the recovery of carbidopa and levodopa in serum and urine samples has changed between 96.80% and 116.24% with RSD% 0.11-0.77. CDs also provided good results for the determination of carbidopa and levodopa in real samples, and had high selectivity in the presence of possible interferences.
RESUMEN
A simple, highly sensitive, and selective fluorometric aptasensing platform based on aptamer and graphene oxide (GO) is proposed for the determination of mercury (II) ion (Hg2+). In the designed assay, two aptamer probes, a carboxy-fluorescein (FAM) labeled aptamer (aptamer A) and its complementary (aptamer B) with partial complement containing several mismatches and GO as the quencher were used. In the absence of Hg2+, both A and B aptamers were adsorbed on the surface of GO by π-π-stacking, leading to fluorescence quenching of FAM due to fluorescence resonance energy transfer (FRET). Upon exposure to Hg2+, the A and B aptamer strands bind Hg2+ and form T-Hg2+-T complexes, leading to the formation of a stable double-stranded aptamer. The double-stranded aptamer is detached from the GO surface, resulting in the recovery of FAM fluorescence. The fluorescence intensity (FI) of the developed sensor was correlated with the Hg2+ concentration under optimized experimental conditions in two wide linear ranges, even in the presence of 10 divalent cations as interferences. The linear ranges were obtained from 200.0 to 900.0 fM and 5.0 to 33.0 pM, a limit of detection (LOD) of 106.0 fM, and a limit of quantification (LOQ) of 321.3 fM. The concentration of Hg2+ was determined in five real samples containing three water and two serum samples, using spiking and standard addition methods and the results were compared with the spiked amounts and atomic absorption (AAS) as standard method respectively, with acceptable recoveries. Furthermore, in the standard addition method, to overcome the effects of matrix influence of real samples in quantitative predictions, the excitation-emission matrix (EEM) data for samples was simultaneously analyzed by multivariate curve resolution with alternating least squares (MCR-ALS) as a second-order standard addition method (SOSAM).
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Grafito , Mercurio , Transferencia Resonante de Energía de Fluorescencia/métodos , Fluorometría/métodos , Agua , Límite de Detección , Oligonucleótidos , Técnicas Biosensibles/métodos , Aptámeros de Nucleótidos/metabolismoRESUMEN
Efficient drug delivery remains a critical challenge for treating neurodegenerative diseases, such as Alzheimer's disease (AD). Using innovative nanomaterials, delivering current medications like acetylcholinesterase inhibitors to the brain through the intranasal route is a promising strategy for managing AD. Here, we developed a unique combinational drug delivery system based on N,N,N-trimethyl chitosan nanoparticles (NPs). These NPs encapsulate rivastigmine, the most potent acetylcholinesterase inhibitor, along with insulin, a complementary therapeutic agent. The spherical NPs exhibited a zeta potential of 17.6 mV, a size of 187.00 nm, and a polydispersity index (PDI) of 0.29. Our findings demonstrate significantly improved drug transport efficiency through sheep nasal mucosa using the NPs compared to drug solutions. The NPs exhibited transport efficiencies of 73.3% for rivastigmine and 96.9% for insulin, surpassing the efficiencies of the drug solutions, which showed transport efficiencies of 52% for rivastigmine and 21% for insulin ex vivo. These results highlight the potential of a new drug delivery system as a promising approach for enhancing nasal transport efficiency. These combinational mucoadhesive NPs offer a novel strategy for the simultaneous cerebral delivery of rivastigmine and insulin, which could prove helpful in developing effective treatments of AD and other neurodegenerative conditions.
RESUMEN
One approach to accelerate the availability of new cancer drugs is to test drugs approved for other conditions as anticancer agents. During recent decades, penciclovir (PNV) has been frequently utilized as a potent antiviral drug, in particular against infections caused by herpes viruses. Many antivirals interact with DNA and change their expression level, so determining the binding mode is of great importance. In our laboratory, we have focused our attention to design improved drugs that target cellular DNA, to understand the mechanism of action at the molecular level, and also to investigate the effect of antiviral drugs as anticancer agents. The results of ct-DNA-PNV interactions at physiological pH using fluorescence spectroscopy, UV-visible absorption spectroscopy, and molecular modeling reveal this drug binds well to ct-DNA through groove binding. The circular dichroism measurements displayed that PNV caused a slight change in the DNA structure which affirmed that the binding of PNV with the DNA occurs through the groove mode. Besides, multi-spectroscopic and molecular docking were used to evaluate how PNV interacts with human serum albumin under physiological conditions. The findings of fluorescence quenching suggested that static quenching was involved in the spontaneous development of HSA-PNV complex through hydrophobic force. The docking simulation results validated the findings of spectroscopic techniques.Communicated by Ramaswamy H. Sarma.