RESUMEN
Biodegradable polymers, encompassing both natural and synthetic polymers, have demonstrated efficacy as carriers for synthetic drugs, natural bioactive molecules, and inorganic metals. This is due to their ability to control the release of these substances. As a result, various advanced materials, such as nanoparticle-loaded hydrogels, nanofibrous scaffolds, and nanocomposites, have been developed. These materials have shown promise in enhancing processes, such as cell proliferation, vascular angiogenesis, hair growth, and wound healing management. Natural polymers, including hyaluronic acid, collagen, chitosan, gelatin, and alginate, as well as synthetic polymers like polylactic acid, polyglycolic acid, polylactic co-glycolic acid, and PCA, have significant potential for promoting wound healing. This study examines the advancements in biodegradable polymers for wound healing, specifically focusing on each polymer and its distinctive formulations. It also discusses the in-vitro experiments conducted using different cell lines, as well as the in-vivo studies that explore the numerous uses of these polymers in wound healing. The discussion also included the exploration of modifications or combinations of several polymers, as well as surface changes, in order to produce synergistic effects and address the limitations of individual polymers. The goal was to expedite the healing process of different chronic wounds. Due to this, there have been notable advancements in the technological use of polymeric mixes, including biodegradable polymer-based scaffolds, which have accelerated the process of wound healing.
RESUMEN
In the quest to create effective sensors that operate at room temperature, consume less power and maintain their stability over time for detecting toxic gases in the environment, molybdenum disulfide (MoS2) and MoS2-based hybrids have emerged as potent materials. In this context, the current work describes the fabrication of Au-MoS2hybrid gas sensor fabricated on gold interdigitated electrodes (GIEs) for sensing harmful CO and NH3gases at room temperature. The GIEs-based Au-MoS2hybrid sensors are fabricated by decorating MoS2nanoflowers (MNF) with varying size of Au nanoparticles using an inert gas evaporation technique. It is observed that by varying the size of Au nanoparticles, the crystallinity gets modified, as confirmed by x-ray diffraction and Micro-Raman spectroscopy (µRS). The gas sensing measurements revealed that the best sensing response is found from the Au-MoS2hybrid (with an average particle size of 10 nm). This particular hybrid shows a 79% response to CO exposure and a 69% response to NH3exposure. The measurements are about 3.5 and 5 times higher than the bare MoS2when exposed to CO and NH3at room temperature, respectively. This enhancement in sensing response is attributed to the modified interfacial interaction between the Au nanoparticles and MNF gets improved, which leads to the formation of a Schottky barrier, as confirmed using x-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy analysis. This enables the development of efficient gas sensors that respond quickly to changes in the gas around them.
RESUMEN
This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.
Asunto(s)
Eliminación de Residuos Líquidos , Purificación del Agua , Reactores Biológicos , Membranas Artificiales , Aguas del Alcantarillado , Aguas ResidualesRESUMEN
The 2017 Texas Water Development Board's State Water Plan predicts a 41% gap between water demand and existing supply by 2070. This reflects an overall projection, but the challenge will affect various regions of the state differently. Texas has 16 regional water planning zones characterized by distinct populations, water demands, and existing water supplies. Each is expected to face variations of pressures, such as increased agricultural and energy development (particularly hydraulic fracturing) and urban growth that do not necessarily follow the region's water plan. Great variability in resource distribution and competing resource demands across Texas will result in the emergence of distinct hotspots, each with unique characteristics that require multiple, localized, interventions to bridge the statewide water gap. This study explores three such hotspots: 1) water-food competition in Lubbock and the potential of producing 3â¯billionâ¯gallons of treated municipal waste water and encouraging dryland agriculture; 2) implementing Low Impact Developments (LIDs) for agriculture in the City of San Antonio, potentially adding 47â¯billionâ¯gallons of water supply, but carrying a potentially high financial cost; and 3) water-energy interrelations in the Eagle Ford Shale in light of well counts, climate dynamics, and population growth. The growing water gap is a state wide problem that requires holistic assessments that capture the impact on the tightly interconnected water, energy, and food systems. Better understanding the trade-offs associated with each 'solution' and enabling informed dialogue between stakeholders, offers a basis for formulating localized policy recommendations specific to each hotspot.
Asunto(s)
Conservación de los Recursos Naturales/métodos , Abastecimiento de Agua/estadística & datos numéricos , Ciudades , Alimentos , Texas , AguaRESUMEN
This study investigates the removal of arsenite (As(III)) from water using dithionite activated by UV light. This work evaluated the removal kinetics of As(III) under UV light irradiation as affected by dithionite dose and light intensity, and characterized the nature of the precipitated solids using XPS and SEM-EDS. Photolysis of dithionite was observed by measuring dithionite concentration using UV absorbance at 315nm. This study also investigated the effect of UV light path length on soluble As concentrations to understand resolubilization mechanisms. Total soluble As concentrations were observed to decrease with reaction time due to reduction of arsenite to form solids having a yellow-orange color. The removal mechanism was found to be reductive precipitation that formed solids of elemental arsenic or arsenic sulfide. However, these solids were observed to resolubilize at later times after dithionite had been consumed. Resolubilization of As was prevented and additional As removal was obtained by frequent dosing of dithionite throughout the experiment. As(III) removal is attributed to photolysis of dithionite by UV light and production of reactive radicals that reduce As(III) and convert it to solid forms.
Asunto(s)
Arsenitos/química , Arsenitos/aislamiento & purificación , Precipitación Química , Ditionita/química , Rayos Ultravioleta , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Oxidación-Reducción , Fotólisis , SolucionesRESUMEN
The production of a large amount of high-quality transition metal dichalcogenides is critical for their use in industrial applications. Here, we demonstrate the scalable exfoliation of bulk molybdenum disulfide (MoS2) powders into single- or few-layer nanosheets using the Taylor-Couette flow. The toroidal Taylor vortices generated in the Taylor-Couette flow provide efficient mixing and high shear stresses on the surfaces of materials, resulting in a more efficient exfoliation of the layered materials. The bulk MoS2 powders dispersed in N-methyl-2-pyrrolidone (NMP) were exfoliated with the Taylor-Couette flow by varying the process parameters, including the initial concentration of MoS2 in the NMP, rotation speed of the reactor, reaction time, and temperature. With a batch process at an optimal condition, half of the exfoliated MoS2 nanosheets were thinner than ~3 nm, corresponding to single to ~4 layers. The spectroscopic and microscopic analysis revealed that the exfoliated MoS2 nanosheets contained the same quality as the bulk powders without any contamination or modification. Furthermore, the continuous exfoliation of MoS2 was demonstrated by the Taylor-Couette flow reactor, which produced an exfoliated MoS2 solution with a concentration of ~0.102 mg/mL. This technique is a promising way for the scalable production of single- or few-layer MoS2 nanosheets without using hazardous intercalation materials.
RESUMEN
Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.