RESUMEN
The objective of this research was to evaluate the efficacy of cinnamon wood biochar (CWBC) in adsorbing sulfamethoxazole (SUL), which alleviates bioavailability and plant uptake. Batch studies at various pH, contact times, and initial SUL loading were used to study SUL adsorption in CWBC, soil, and 2.5% CWBC amended soil. SUL mitigation from plant uptake were examined using Ipomoea aquatica at different SUL contamination levels in the soil. The kinetic results were described by pseudo-second-order with maximum adsorption capacities (Qmax) of 95.64 and 0.234 mg/g for pristine CWBC and amendment, respectively implying that chemical interactions are rate-determining stages. Hill and Toth's model described the isotherm data for pristine CWBC, soil and CWBC amended soil as Qmax of 113.44, 0.72, and 3.45 mg/g. Column data showed a great mobilization of SUL in loamy sand; however, when CWBC was added to the loamy sand, the mobilization was drastically reduced by 98.8%. The Ipomoea aquatica showed a great potential to SUL uptake and it depended on the contamination level; the SUL accumulation in plant was 9.6-13.8 and 19.1-48 mg/kg when soil was spiked with 5 and 50 mg/kg, respectively. The addition of 2.5% CWBC reduced root and shoot uptake by 30 and 95%, respectively in 5 mg/kg of SUL, whereas with 50 mg/kg of SUL, the root and shoot uptake was reduced by 60 and 61%, respectively. The current study suggested CWBC as a possible adsorbent that may be employed to reduce SUL bioavailability in environmental matrices.
Asunto(s)
Ipomoea , Contaminantes del Suelo , Disponibilidad Biológica , Carbón Orgánico , Cinnamomum zeylanicum/metabolismo , Ipomoea/metabolismo , Arena , Suelo , Contaminantes del Suelo/análisis , Sulfametoxazol , Madera/químicaRESUMEN
Objectives of the present research were to examine the capacity of disc-milled high lignin biochar colloids (CBC) for the removal of ciprofloxacin (CPX) from aqueous solution and synthetic hydrolyzed human urine. In this study, adsorption of CPX was tested against the initial pH (3-10), ionic strength (0.001-0.1â¯M NaNO3), resident time (up to 8â¯h), initial CPX concentration (5-100â¯mg/L) and temperature (25, 35, and 45⯰C). The surface morphology was examined using Brunauer-Emmett-Teller (BET) specific surface area. The CBC was observed to beâ¯<â¯300â¯nm whereas the BET surface area was 284â¯m2/g. Best CPX adsorption demonstrated at pH 5-6 and however, indicated ionic strength dependency. Experimental kinetics data in aqueous media were well-fitted to the pseudo-second-order (r2 of 0.98), while the Hill and Langmuir isotherm models best described the isotherm data (r2 of 0.95 and 0.94, respectively) confirming chemisorption followed by physisorption interactions. The thermodynamics results indicate that CPX adsorption onto CBC is spontaneous (-ΔG), endothermic (+ΔH) and has increased randomness (+ΔS) in the aqueous system. The kinetic experimental data in synthetic urine matrix was fitted with Elovich (r2â¯=â¯0.99) and fractional power (r2â¯=â¯0.96) models whereas Hills (r2â¯=â¯0.99) and Langmuir (r2â¯=â¯0.97) models were the most fitted with isotherm data suggesting the adsorption of CPX on the CBC by chemisorption mechanisms. In conclusion, CBC demonstrated effective removal of CPX indicating its potential to be used in wastewater treatment.
Asunto(s)
Ciprofloxacina , Contaminantes Químicos del Agua , Adsorción , Antibacterianos , Carbón Orgánico , Humanos , Concentración de Iones de Hidrógeno , Cinética , Termodinámica , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.
Asunto(s)
Antimonio , Contaminantes del Suelo , Efectos Antropogénicos , Antimonio/toxicidad , Ecosistema , Monitoreo del Ambiente , Humanos , Gestión de Riesgos , Suelo , Contaminantes del Suelo/análisis , Contaminantes del Suelo/toxicidadRESUMEN
With the ever-increasing demand for lithium (Li) for portable energy storage devices, there is a global concern associated with environmental contamination of Li, via the production, use, and disposal of Li-containing products, including mobile phones and mood-stabilizing drugs. While geogenic Li is sparingly soluble, Li added to soil is one of the most mobile cations in soil, which can leach to groundwater and reach surface water through runoff. Lithium is readily taken up by plants and has relatively high plant accumulation coefficient, albeit the underlying mechanisms have not been well described. Therefore, soil contamination with Li could reach the food chain due to its mobility in surface- and ground-waters and uptake into plants. High environmental Li levels adversely affect the health of humans, animals, and plants. Lithium toxicity can be considerably managed through various remediation approaches such as immobilization using clay-like amendments and/or chelate-enhanced phytoremediation. This review integrates fundamental aspects of Li distribution and behaviour in terrestrial and aquatic environments in an effort to efficiently remediate Li-contaminated ecosystems. As research to date has not provided a clear picture of how the increased production and disposal of Li-based products adversely impact human and ecosystem health, there is an urgent need for further studies on this field.
Asunto(s)
Contaminantes del Suelo , Animales , Biodegradación Ambiental , Ecosistema , Humanos , Litio/análisis , Gestión de Riesgos , Suelo , Contaminantes del Suelo/análisisRESUMEN
Polycyclic aromatic hydrocarbons (PAHs) are generated due to incomplete burning of organic substances. Use of fossil fuels is the primary anthropogenic cause of PAHs emission in natural settings. Although several PAH compounds exist in the natural environmental setting, only 16 of these compounds are considered priority pollutants. PAHs imposes several health impacts on humans and other living organisms due to their carcinogenic, mutagenic, or teratogenic properties. The specific characteristics of PAHs, such as their high hydrophobicity and low water solubility, influence their active adsorption onto soils and sediments, affecting their bioavailability and subsequent degradation. Therefore, this review first discusses various sources of PAHs, including source identification techniques, bioavailability, and interactions of PAHs with soils and sediments. Then this review addresses the remediation technologies adopted so far of PAHs in soils and sediments using immobilization techniques (capping, stabilization, dredging, and excavation), mobilization techniques (thermal desorption, washing, electrokinetics, and surfactant assisted), and biological degradation techniques. The pros and cons of each technology are discussed. A detailed systematic compilation of eco-friendly approaches used to degrade PAHs, such as phytoremediation, microbial remediation, and emerging hybrid or integrated technologies are reviewed along with case studies and provided prospects for future research.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos , Biodegradación Ambiental , Disponibilidad Biológica , Sedimentos Geológicos , Humanos , Hidrocarburos Policíclicos Aromáticos/análisis , Suelo , TensoactivosRESUMEN
The present study investigated adsorptive removal of toluene and ethylbenzene from the aqueous media via using biochar derived from municipal solid waste (termed "MSW-BC") in a single and binary contaminant system at 25-45 °C. The adsorption was evaluated at different pH (3-10), experimental time (up to 24 h), and initial adsorbate concentrations (10-600 µg/L) in single and binary contaminant system. A fixed-bed column experiment was also conducted using MSW-BC (0.25%) and influent concentration of toluene and ethylbenzene (4 mg/L) at 2 mL/min of flow rate. The adsorption of toluene and ethylbenzene on the MSW-BC was mildly dependent on the pH, and the peak adsorption ability (44-47 µg/g) was recorded at a baseline pH of ~8 in mono and dual contaminant system. Langmuir and Hill are the models that match the isotherm results in a single contaminant environment for both toluene (R2 of 0.97 and 0.99, respectively) and ethylbenzene (R2 of 0.99 and 0.99, respectively) adsorption. In the binary system, the isotherm models matched in the order of Langmuir > Hill > Freundlich for toluene, whereas Hill > Freundlich > Langmuir for ethylbenzene. The adsorption in the batch experiment was likely to take place via cooperative and multilayer adsorption onto MSW-BC involving hydrophobic, π- π and n- π attractions, specific interaction such as hydrogen-π and cation-π interactions, and van der Waals interactions. The thermodynamic results indicate exothermic adsorption occurred by physical attractions between toluene and ethylbenzene, and MSW-BC. The breakthrough behavior of toluene and ethylbenzene was successfully described with Yoon-Nelson and Thomas models. The data demonstrate that the low-cost adsorbent derived from the municipal solid waste can be utilized to remove toluene and ethylbenzene in landfill leachate.
Asunto(s)
Residuos Sólidos , Tolueno , Derivados del Benceno , Carbón Orgánico , CinéticaRESUMEN
The goal of the present study was to evaluate the immobilization and retention of caffeine (CFN) in soil and the influence of biochar for the CFN transport in agricultural soil. The biochar was produced from the Ulva reticulata seaweed biomass (ULBC) under the slow-pyrolysis with a heating rate of 7 °C/min at 500 °C and characterized using XRD and FTIR. The CFN retention and transport abilities in loamy sand and ULBC amended (2.5%) soil were evaluated under various pH values range of 3-10 and at various CFN concentrations using batch and column experiments. The surface orientation of ULBC was portrayed as the randomized distribution of hetero and homogeneous nature. The highest retention capacity (40 µg/g) was obtained at pH 4.0. Soil amendment with ULBC shows a higher retention affinity towards CFN, of up to 150 µg/g than soil, with minimal pH dependence. The maximum CFN adsorption capacities of soil and amended soils were 420 and 820 µg/g, respectively, based on the Langmuir model. Batch experiments suggested the adsorption of CFN by the biochar amended loamy soil is governed by the electrostatic attraction. The column experiment data demonstrated a high transport potential of CFN in the loamy sand; however, a strong cumulative reduction of transport (58%) was observed with the application of ULBC into the loamy sand. Thus, the addition of seaweed biochar as an amendment in soils with biosolids and wastewater irrigation may reduce the mobilization of CFN to the aquatic system and possibly reduce plant uptake.
Asunto(s)
Contaminantes del Suelo , Ulva , Adsorción , Cafeína , Carbón Orgánico , Suelo , Contaminantes del Suelo/análisisRESUMEN
The present study aimed to envisage the effect of physicochemical properties on the performance of Gliricidia sepium biochar (GBC) pyrolyzed at 300, 500, and 700 °C in the removal caffeine (CFN); a pharmaceutical and personal care product, from water. The physicochemical properties of GBC were characterized by proximate and ultimate analysis, BET, SEM, FTIR, and Raman spectroscopy. The adsorption batch experiment was carried out at various pH values (pH 3-10), mixing times (up to 24 h), and initial CFN concentration (10-500 mg/L). The FTIR analysis revealed the loss of polar functional groups on the surface of GBC derived at high temperatures. The red-shifted and blue-shifted Raman peaks indicate the condensation of small molecules on GBC. The GBC derived at 700 °C demonstrated high CFN adsorption capacity (16.26 mg/g) due to its high surface area and aromaticity. The highest adsorption of CFN was occurred at acidic pH range from 3.5 to 4.5 due to the existence of non-specific attraction between CFN and GBC. The kinetics and isotherm experimental data were fitted with Elovich and fractional power kinetic regression, Freundlich, and Temkin isotherm models, which suggested the adsorption of CFN on the GBC by mixed mechanisms; physisorption and chemisorption including π-π interactions, hydrogen bonding, n-π interactions, electrostatic attraction, and electron donor-acceptor attraction. Moreover, both surface area and aromaticity index have demonstrated a high positive correlation for CFN adsorption, signifying the importance of controlling physicochemical properties based on the end-user purpose of biochar.