RESUMEN
Many interesting and promising prototypes for visualizing video data have been proposed, including those that combine videos with their spatial context (contextualized videos). However, relatively little work has investigated the fundamental design factors behind these prototypes in order to provide general design guidance. Focusing on real-time video data visualization, we evaluated two important design factors--video placement method and spatial context presentation method--through a user study. In addition, we evaluated the effect of spatial knowledge of the environment. Participants' performance was measured through path reconstruction tasks, where the participants followed a target through simulated surveillance videos and marked the target paths on the environment model. We found that embedding videos inside the model enabled realtime strategies and led to faster performance. With the help of contextualized videos, participants not familiar with the real environment achieved similar task performance to participants that worked in that environment. We discuss design implications and provide general design recommendations for traffic and security surveillance system interfaces.
RESUMEN
The Radiation Protection Group at the Los Alamos National Laboratory has a wind tunnel capable of measuring the aerosol collection efficiencies of air sampling devices. In the fall of 2005, the group received an internal Los Alamos request to perform aerosol collection efficiency tests on two air samplers manufactured by the Bladewerx Corporation (Rio Rancho, NM). This paper presents the results from tests performed in the wind tunnel facility at a test velocity of 0.5 m s. The SabreAlert (Portable Workplace Monitor) and the SabreBZM (Breathing Zone Monitor) are both designed to detect and measure the presence of alpha emitting isotopes in atmospheres. The SabreAlert was operated at two test air flow rates of 6 and 45 liters per minute (LPM), and the SabreBZM was operated at two test air flow rates of 3 and 19 LPM. The aerosol collection efficiencies of both samplers were evaluated with oleic acid (monodisperse) liquid droplet aerosols tagged with sodium fluorescein tracer. These test aerosols varied in size from about 2.3 to 17.2 microns (aerodynamic equivalent diameter). The SabreAlert was roughly 100% efficient in aerosol collection at a flow rate of 6 LPM, and had an aerodynamic cutpoint diameter of 11.3 microns at the 45 LPM flow rate. The SabreBZM had an aerodynamic cutpoint diameter of 6.7 microns at the 3 LPM flow rate, but the SabreBZM aerosol collection efficiency never exceeded 13.6% at the 19 LPM test flow rate condition.