Leaf-Level Bidirectional Exchange of Formaldehyde on Deciduous and Evergreen Tree Saplings.

Gas-phase formaldehyde (HCHO) is formed in high yield from the oxidation of many volatile organic compounds (VOCs) and is commonly used as a constraint when testing the performance of VOC oxidation mechanisms in models. However, prior to using HCHO as a model constraint for VOC oxidation in forested regions, it is essential to have a thorough understanding of its foliar exchange. Therefore, a controlled laboratory setup was designed to measure the emission and dry deposition of HCHO at the leaf-level to red oak (Quercus rubra) and Leyland cypress (Cupressus × leylandii) tree saplings. The results show that HCHO has a compensation point (CP) that rises exponentially with temperature (22-35 °C) with a mean range of 0.3-0.9 ppbv. The HCHO CP results are also found to be independent of the studied tree species and 40-70% relative humidity. Given that HCHO mixing ratios in forests during the daytime are usually greater than 1 ppbv, the magnitude of the CP suggests that trees generally act as a net sink of HCHO. Additionally, the results show that HCHO foliar exchange is stomatally controlled and better matches a reactivity factor (f0) of 0 as opposed to 1 in conventional dry deposition parametrizations. At 30 °C, daytime HCHO dry deposition fluxes are reduced by upward of 50% when using f0 = 0 and a nonzero HCHO CP, although deposition remains the dominant canopy sink of HCHO. A reduced deposition sink also implies the increased importance of the gas-phase photolysis of HCHO as a source of HO2.

Indoor Air Quality Implications of Germicidal 222 nm Light.

One strategy for mitigating the indoor transmission of airborne pathogens, including the SARS-CoV-2 virus, is irradiation by germicidal UV light (GUV). A particularly promising approach is 222 nm light from KrCl excimer lamps (GUV222); this inactivates airborne pathogens and is thought to be relatively safe for human skin and eye exposure. However, the impact of GUV222 on the composition of indoor air has received little experimental study. Here, we conduct laboratory experiments in a 150 L Teflon chamber to examine the formation of secondary species by GUV222. We show that GUV222 generates ozone (O3) and hydroxyl radicals (OH), both of which can react with volatile organic compounds to form oxidized volatile organic compounds and secondary organic aerosol particles. Results are consistent with a box model based on the known photochemistry. We use this model to simulate GUV222 irradiation under more realistic indoor air scenarios and demonstrate that under some conditions, GUV222 irradiation can lead to levels of O3, OH, and secondary organic products that are substantially elevated relative to normal indoor conditions. The results suggest that GUV222 should be used at low intensities and in concert with ventilation, decreasing levels of airborne pathogens while mitigating the formation of air pollutants.

Evaluating the Impact of Chemical Complexity and Horizontal Resolution on Tropospheric Ozone Over the Conterminous US With a Global Variable Resolution Chemistry Model.

A new configuration of the Community Earth System Model (CESM)/Community Atmosphere Model with full chemistry (CAM-chem) supporting the capability of horizontal mesh refinement through the use of the spectral element (SE) dynamical core is developed and called CESM/CAM-chem-SE. Horizontal mesh refinement in CESM/CAM-chem-SE is unique and novel in that pollutants such as ozone are accurately represented at human exposure relevant scales while also directly including global feedbacks. CESM/CAM-chem-SE with mesh refinement down to ∼14 km over the conterminous US (CONUS) is the beginning of the Multi-Scale Infrastructure for Chemistry and Aerosols (MUSICAv0). Here, MUSICAv0 is evaluated and used to better understand how horizontal resolution and chemical complexity impact ozone and ozone precursors over CONUS as compared to measurements from five aircraft campaigns, which occurred in 2013. This field campaign analysis demonstrates the importance of using finer horizontal resolution to accurately simulate ozone precursors such as nitrogen oxides and carbon monoxide. In general, the impact of using more complex chemistry on ozone and other oxidation products is more pronounced when using finer horizontal resolution where a larger number of chemical regimes are resolved. Large model biases for ozone near the surface remain in the Southeast US as compared to the aircraft observations even with updated chemistry and finer horizontal resolution. This suggests a need for adding the capability of replacing sections of global emission inventories with regional inventories, increasing the vertical resolution in the planetary boundary layer, and reducing model biases in meteorological variables such as temperature and clouds.

Catalytic role of formaldehyde in particulate matter formation.

Formaldehyde (HCHO), the simplest and most abundant carbonyl in the atmosphere, contributes to particulate matter (PM) formation via two in-cloud processing pathways. First, in a catalytic pathway, HCHO reacts with hydrogen peroxide (H2O2) to form hydroxymethyl hydroperoxide (HMHP), which rapidly oxidizes dissolved sulfur dioxide (SO2,aq) to sulfate, regenerating HCHO. Second, HCHO reacts with dissolved SO2,aq to form hydroxymethanesulfonate (HMS), which upon oxidation with the hydroxyl radical (OH) forms sulfate and also reforms HCHO. Chemical transport model simulations using rate coefficients from laboratory studies of the reaction rate of HMHP with SO2,aq show that the HMHP pathways reduce the SO2 lifetime by up to a factor of 2 and contribute up to ∼18% of global sulfate. This contribution rises to >50% in isoprene-dominated regions such as the Amazon. Combined with recent results on HMS, this work demonstrates that the one-carbon molecules HMHP and HCHO contribute significantly to global PM, with HCHO playing a crucial catalytic role.

Tropospheric NO2 and O3 Response to COVID-19 Lockdown Restrictions at the National and Urban Scales in Germany.

This study estimates the influence of anthropogenic emission reductions on nitrogen dioxide ( N O 2 ) and ozone ( O 3 ) concentration changes in Germany during the COVID-19 pandemic period using in-situ surface and Sentinel-5 Precursor TROPOspheric Monitoring Instrument (TROPOMI) satellite column measurements and GEOS-Chem model simulations. We show that reductions in anthropogenic emissions in eight German metropolitan areas reduced mean in-situ (& column) N O 2 concentrations by 23 % (& 16 % ) between March 21 and June 30, 2020 after accounting for meteorology, whereas the corresponding mean in-situ O 3 concentration increased by 4 % between March 21 and May 31, 2020, and decreased by 3 % in June 2020, compared to 2019. In the winter and spring, the degree of N O X saturation of ozone production is stronger than in the summer. This implies that future reductions in N O X emissions in these metropolitan areas are likely to increase ozone pollution during winter and spring if appropriate mitigation measures are not implemented. TROPOMI N O 2 concentrations decreased nationwide during the stricter lockdown period after accounting for meteorology with the exception of North-West Germany which can be attributed to enhanced N O X emissions from agricultural soils.

Competition of Partitioning and Reaction Controls Brown Carbon Formation from Butenedial in Particles.

Organic reactions in atmospheric particles impact human health and climate, such as by the production of brown carbon. Previous work suggests that reactions are faster in particles than in bulk solutions because of higher reactant concentrations and pronounced surface-mediated processes. Additionally, dialdehydes may have accelerated reactions in particles, as has been shown for the glyoxal reaction with ammonium sulfate (AS). Here, we examine the competition between evaporation and reaction of butenedial, a semivolatile dialdehyde, and reduced nitrogen (NHX) in bulk solutions and levitated particles with mass spectrometry (MS). Pyrrolinone is the major product of butenedial/AS bulk solutions, indicating brown carbon formation via accretion reactions. By contrast, pyrrolinone is completely absent in all MS measurements of comparable levitated particles suspended in a pure N2 stream. Pyrrolinone is only produced in levitated butenedial particles exposed to gas-phase ammonia, without enhanced reaction kinetics previously observed for glyoxal and other systems. Despite butenedial's large Henry's law constant and fast reaction with NHX compared to glyoxal, the brown carbon pathway competes with evaporation only in polluted regions with extreme NHX. Therefore, accurate knowledge of effective volatilities or Henry's law constants for complex aerosol matrices is required when chemistry studied in bulk solutions is extrapolated to atmospheric particles.

High resolution nanoscale chemical analysis of bitumen surface microstructures.

Surface microstructures of bitumen are key sites in atmospheric photo-oxidation leading to changes in the mechanical properties and finally resulting in cracking and rutting of the material. Investigations at the nanoscale remain challenging. Conventional combination of optical microscopy and spectroscopy cannot resolve the submicrostructures due to the Abbe restriction. For the first time, we report here respective surface domains, namely catana, peri and para phases, correlated to distinct molecules using combinations of atomic force microscopy with infrared spectroscopy and with correlative time of flight-secondary ion mass spectrometry. Chemical heterogeneities on the surface lead to selective oxidation due to their varying susceptibility to photo-oxidation. It was found, that highly oxidized compounds, are preferentially situated in the para phase, which are mainly asphaltenes, emphasising their high oxidizability. This is an impressive example how chemical visualization allows elucidation of the submicrostructures and explains their response to reactive oxygen species from the atmosphere.

What Are the Different Measures of Mobility Telling Us About Surface Transportation CO2 Emissions During the COVID-19 Pandemic?

The COVID-19 pandemic led to widespread reductions in mobility and induced observable changes in atmospheric emissions. Recent work has employed novel mobility data sets as a proxy for trace gas emissions from traffic by scaling CO2 emissions linearly with those near-real-time mobility data. Yet, there has been little work evaluating these emission numbers. Here, we systematically compare these mobility data sets to traffic data from local governments in seven diverse urban and national/state regions to characterize the magnitude of errors that result from using the mobility data. We observe differences in excess of 60% between these mobility data sets and local traffic data. We could not find a general functional relationship between the mobility data and traffic flow over all the regions and observe higher deviations from using such general relationships than the original data. Finally, we give an overview of the potential errors that come from estimating CO2 emissions using (mobility or traffic) activity data. Future work should be cautious while using these mobility metrics for emission estimates.

Global Importance of Hydroxymethanesulfonate in Ambient Particulate Matter: Implications for Air Quality.

Sulfur compounds are an important constituent of particulate matter, with impacts on climate and public health. While most sulfur observed in particulate matter has been assumed to be sulfate, laboratory experiments reveal that hydroxymethanesulfonate (HMS), an adduct formed by aqueous phase chemical reaction of dissolved HCHO and SO2, may be easily misinterpreted in measurements as sulfate. Here we present observational and modeling evidence for a ubiquitous global presence of HMS. We find that filter samples collected in Shijiazhuang, China, and examined with ion chromatography within 9 days show as much as 7.6 µg m-3 of HMS, while samples from Singapore examined 9-18 months after collection reveal ~0.6 µg m-3 of HMS. The Shijiazhuang samples show only minor traces of HMS 4 months later, suggesting that HMS had decomposed over time during sample storage. In contrast, the Singapore samples do not clearly show a decline in HMS concentration over 2 months of monitoring. Measurements from over 150 sites, primarily derived from the IMPROVE network across the United States, suggest the ubiquitous presence of HMS in at least trace amounts as much as 60 days after collection. The degree of possible HMS decomposition in the IMPROVE observations is unknown. Using the GEOS-Chem chemical transport model, we estimate that HMS may account for 10% of global particulate sulfur in continental surface air and over 25% in many polluted regions. Our results suggest that reducing emissions of HCHO and other volatile organic compounds may have a co-benefit of decreasing particulate sulfur.

Contrasting Reactive Organic Carbon Observations in the Southeast United States (SOAS) and Southern California (CalNex).

Despite the central role of reactive organic carbon (ROC) in the formation of secondary species that impact global air quality and climate, our assessment of ROC abundance and impacts is challenged by the diversity of species that contribute to it. We revisit measurements of ROC species made during two field campaigns in the United States: the 2013 SOAS campaign in forested Centreville, AL, and the 2010 CalNex campaign in urban Pasadena, CA. We find that average measured ROC concentrations are about twice as high in Pasadena (73.8 µgCsm-3) than in Centreville (36.5 µgCsm-3). However, the OH reactivity (OHR) measured at these sites is similar (20.1 and 19.3 s-1). The shortfall in OHR when summing up measured contributions is 31%, at Pasadena and 14% at Centreville, suggesting that there may be a larger reservoir of unmeasured ROC at the former site. Estimated O3 production and SOA potential (defined as concentration × yield) are both higher during CalNex than SOAS. This analysis suggests that the ROC in urban California is less reactive, but due to higher concentrations of oxides of nitrogen and hydroxyl radicals, is more efficient in terms of O3 and SOA production, than in the forested southeastern U.S.

Aqueous-Phase Decomposition of Isoprene Hydroxy Hydroperoxide and Hydroxyl Radical Formation by Fenton-like Reactions with Iron Ions.

Isoprene hydroxy hydroperoxides (ISOPOOH) formed by the photooxidation of isoprene under low-NO conditions play an important role in the formation and evolution of secondary organic aerosols, yet multiphase processes of ISOPOOH are poorly understood. By applying electron paramagnetic resonance spectroscopy, we observe that ISOPOOH undergoes aqueous-phase decomposition upon interacting with Fe(II) ions to form OH and organic radicals at room temperature. To reproduce the measured dependence of OH formation on the Fe concentrations by kinetic modeling, we postulate that Fe(II) ions react with ISOPOOH via Fenton-like reactions to form OH radicals with a rate constant of 7.3 × 10-18 cm3 s-1. At low concentrations, oxalate forms monocomplexes with Fe(II) ions, which can promote OH formation by ISOPOOH. However, at high concentrations, oxalate scavenges OH radicals, thereby lowering aqueous OH concentrations. These findings provide new insight for the atmospheric fate of ISOPOOH and reactive oxygen species generation in the aqueous phase.

Dimensionality-reduction techniques for complex mass spectrometric datasets: application to laboratory atmospheric organic oxidation experiments.

Oxidation of organic compounds in the atmosphere produces an immensely complex mixture of product species, posing a challenge for both their measurement in laboratory studies and their inclusion in air quality and climate models. Mass spectrometry techniques can measure thousands of these species, giving insight into these chemical processes, but the datasets themselves are highly complex. Data reduction techniques that group compounds in a chemically and kinetically meaningful way provide a route to simplify the chemistry of these systems but have not been systematically investigated. Here we evaluate three approaches to reducing the dimensionality of oxidation systems measured in an environmental chamber: positive matrix factorization (PMF), hierarchical clustering analysis (HCA), and a parameterization to describe kinetics in terms of multigenerational chemistry (gamma kinetics parameterization, GKP). The evaluation is implemented by means of two datasets: synthetic data consisting of a three-generation oxidation system with known rate constants, generation numbers, and chemical pathways; and the measured products of OH-initiated oxidation of a substituted aromatic compound in a chamber experiment. We find that PMF accounts for changes in the average composition of all products during specific periods of time but does not sort compounds into generations or by another reproducible chemical process. HCA, on the other hand, can identify major groups of ions and patterns of behavior and maintains bulk chemical properties like carbon oxidation state that can be useful for modeling. The continuum of kinetic behavior observed in a typical chamber experiment can be parameterized by fitting species' time traces to the GKP, which approximates the chemistry as a linear, first-order kinetic system. The fitted parameters for each species are the number of reaction steps with OH needed to produce the species (the generation) and an effective kinetic rate constant that describes the formation and loss rates of the species. The thousands of species detected in a typical laboratory chamber experiment can be organized into a much smaller number (10-30) of groups, each of which has a characteristic chemical composition and kinetic behavior. This quantitative relationship between chemical and kinetic characteristics, and the significant reduction in the complexity of the system, provides an approach to understanding broad patterns of behavior in oxidation systems and could be exploited for mechanism development and atmospheric chemistry modeling.

Sulfate Formation via Cloud Processing from Isoprene Hydroxyl Hydroperoxides (ISOPOOH).

The oxidation of sulfur dioxide (SO2) by peroxides leads to the formation of sulfate in cloudwater, contributing to particulate matter (PM) formation. The reaction with hydrogen peroxide (H2O2) is considered to be the main cloud oxidation pathway. Previous studies have examined the oxidation of SO2 in cloudwater by small organic peroxides with one functional group; however, oxidation by multifunctional organic hydroperoxides, which are expected to have higher water solubility and reactivity, has not been examined. We investigate the aqueous oxidation of SO2 by the two main isomers of isoprene hydroxyl hydroperoxide (ISOPOOH), the primary low-NOx isoprene oxidation products in the atmosphere. Having large Henry's law constants and being among the most abundant multifunctional hydroperoxides, they are among the most important organic hydroperoxides present in clouds. The pH dependence of the reactions was investigated at cloud relevant pH of 3-6, and the results reveal their importance compared to the oxidation of SO2 via H2O2. Model simulations in GEOS-Chem, updated with the chemistry described herein, highlight the importance of these pathways for sulfate formation in regions with high isoprene emissions and low-NOx atmospheric conditions, especially if they maintain significant SO2 emissions.

A new laser-based and ultra-portable gas sensor for indoor and outdoor formaldehyde (HCHO) monitoring.

In this work, a new commercially available, laser-based, and ultra-portable formaldehyde (HCHO) gas sensor is characterized, and its usefulness for monitoring HCHO mixing ratios in both indoor and outdoor environments is assessed. Stepped calibrations and intercomparison with well-established laser-induced fluorescence (LIF) instrumentation allow a performance evaluation of the absorption-based, mid-infrared HCHO sensor from Aeris Technologies, Inc. The Aeris sensor displays linear behavior (R2 > 0.940) when compared with LIF instruments from Harvard and NASA Goddard. A non-linear least-squares fitting algorithm developed independently of the sensor's manufacturer to fit the sensor's raw absorption data during post-processing further improves instrument performance. The 3σ limit of detection (LOD) for 2, 15, and 60 min integration times are 2190, 690, and 420 pptv HCHO, respectively, for mixing ratios reported in real-time, though the LOD improves to 1800, 570, and 300 pptv HCHO, respectively, during post-processing. Moreover, the accuracy of the sensor was found to be ±(10% + 0.3) ppbv when compared against LIF instrumentation sampling ambient air. This sub-ppbv precision and level of accuracy are sufficient for most HCHO levels measured in indoor and outdoor environments. While the compact Aeris sensor is currently not a replacement for the most sensitive research-grade instrumentation available, its usefulness for monitoring HCHO is clearly demonstrated.

Mechanistic study of the formation of ring-retaining and ring-opening products from the oxidation of aromatic compounds under urban atmospheric conditions.

Aromatic hydrocarbons make up a large fraction of anthropogenic volatile organic compounds and contribute significantly to the production of tropospheric ozone and secondary organic aerosol (SOA). Four toluene and four 1,2,4-trimethylbenzene (1,2,4-TMB) photooxidation experiments were performed in an environmental chamber under relevant polluted conditions (NO x ~ 10ppb). An extensive suite of instrumentation including two proton-transfer-reaction mass spectrometers (PTR-MS) and two chemical ionisation mass spectrometers ( NH 4 + CIMS and I- CIMS) allowed for quantification of reactive carbon in multiple generations of hydroxyl radical (OH)-initiated oxidation. Oxidation of both species produces ring-retaining products such as cresols, benzaldehydes, and bicyclic intermediate compounds, as well as ring-scission products such as epoxides and dicarbonyls. We show that the oxidation of bicyclic intermediate products leads to the formation of compounds with high oxygen content (an O : C ratio of up to 1.1). These compounds, previously identified as highly oxygenated molecules (HOMs), are produced by more than one pathway with differing numbers of reaction steps with OH, including both auto-oxidation and phenolic pathways. We report the elemental composition of these compounds formed under relevant urban high-NO conditions. We show that ring-retaining products for these two precursors are more diverse and abundant than predicted by current mechanisms. We present the speciated elemental composition of SOA for both precursors and confirm that highly oxygenated products make up a significant fraction of SOA. Ring-scission products are also detected in both the gas and particle phases, and their yields and speciation generally agree with the kinetic model prediction.

Using collision-induced dissociation to constrain sensitivity of ammonia chemical ionization mass spectrometry ( N H 4 + CIMS) to oxygenated volatile organic compounds.

Chemical ionization mass spectrometry (CIMS) instruments routinely detect hundreds of oxidized organic compounds in the atmosphere. A major limitation of these instruments is the uncertainty in their sensitivity to many of the detected ions. We describe the development of a new high-resolution time-of-flight chemical ionization mass spectrometer that operates in one of two ionization modes: using either ammonium ion ligand-switching reactions such as for N H 4 + CIMS or proton transfer reactions such as for protontransfer-reaction mass spectrometer (PTR-MS). Switching between the modes can be done within 2min. The N H 4 + CIMS mode of the new instrument has sensitivities of up to 67 000 dcps ppbv-1 (duty-cycle-corrected ion counts per second per part per billion by volume) and detection limits between 1 and 60 pptv at 2σ for a 1 s integration time for numerous oxygenated volatile organic compounds. We present a mass spectrometric voltage scanning procedure based on collision-induced dissociation that allows us to determine the stability of ammonium-organic ions detected by the N H 4 + CIMS instrument. Using this procedure, we can effectively constrain the sensitivity of the ammonia chemical ionization mass spectrometer to a wide range of detected oxidized volatile organic compounds for which no calibration standards exist. We demonstrate the application of this procedure by quantifying the composition of secondary organic aerosols in a series of laboratory experiments.

Influence of Particle Physical State on the Uptake of Medium-Sized Organic Molecules.

The uptake of medium-sized levoglucosan and 2,4-dinitrophenol to organic particles produced by α-pinene ozonolysis and to ammonium sulfate particles was studied from 10% to >95% relative humidity (RH). For aqueous sulfate particles, the water-normalized gas-particle partitioning coefficient of levoglucosan decreased from (1.0 ± 0.1) × 10-3 to (0.2 ± 0.1) × 10-3 (ng µg-1)particle/(ng m-3)gas from 40% to >95% RH, suggestive of a salting-in mechanism between levoglucosan and ionic ammonium sulfate solutions. For the organic particles, the levoglucosan partitioning coefficient increased from 10% to 40% RH and became invariant at (2.0 ± 0.4) × 10-3 (ng µg-1)/(ng m-3) above 40% RH. A kinetic limitation on uptake below 40% RH was implied, compared to a thermodynamic regime above 40% RH. The estimated diffusivity was 10-19±0.05 m2 s-1 at 40% RH. By comparison, the uptake of 2,4-dinitrophenol onto the organic particles was below detection limit, implying an upper limit on the partitioning coefficient of 6.8 × 10-6 (ng µg-1)/(ng m-3) at 80% RH. The results highlight that the molecular uptake of gases onto particles can be regulated by both kinetic and thermodynamic factors, either of which can limit the uptake of medium-sized organic molecules by atmospherically relevant particles.

Kinetics and Product Yields of the OH Initiated Oxidation of Hydroxymethyl Hydroperoxide.

Hydroxymethyl hydroperoxide (HMHP), formed in the reaction of the C1 Criegee intermediate with water, is among the most abundant organic peroxides in the atmosphere. Although reaction with OH is thought to represent one of the most important atmospheric removal processes for HMHP, this reaction has been largely unstudied in the laboratory. Here, we present measurements of the kinetics and products formed in the reaction of HMHP with OH. HMHP was oxidized by OH in an environmental chamber; the decay of the hydroperoxide and the formation of formic acid and formaldehyde were monitored over time using CF3O- chemical ionization mass spectrometry (CIMS) and laser-induced fluorescence (LIF). The loss of HMHP by reaction with OH is measured relative to the loss of 1,2-butanediol [ k1,2-butanediol+OH = (27.0 ± 5.6) × 10-12 cm3 molecule-1s-1]. We find that HMHP reacts with OH at 295 K with a rate coefficient of (7.1 ± 1.5) × 10-12 cm3 molecule-1s-1, with the formic acid to formaldehyde yield in a ratio of 0.88 ± 0.21 and independent of NO concentration (3 × 1010 - 1.5 × 1013 molecules cm-3). We suggest that, exclusively, abstraction of the methyl hydrogen of HMHP results in formic acid, while abstraction of the hydroperoxy hydrogen results in formaldehyde. We further evaluate the relative importance of HMHP sinks and use global simulations from GEOS-Chem to estimate that HMHP oxidation by OH contributes 1.7 Tg yr-1 (1-3%) of global annual formic acid production.