Facile synthesis of a three-dimensional Ln-MOF@FCNT composite for the fabrication of a symmetric supercapacitor device with ultra-high energy density: overcoming the energy storage barrier.

In order to quench the thirst for efficient energy storage devices, a novel praseodymium-based state-of-the-art three-dimensional metal-organic framework (MOF), {[Pr(pdc)2]Me2NH2}n (YK-1), has been synthesized by using a simple solvothermal method employing a readily available ligand. YK-1 was characterised by single-crystal XRD and crystallographic analysis. The electrochemical measurements of YK-1 show that it exhibits a specific capacitance of 363.5 F g-1 at a current density of 1.5 A g-1 with 83.8% retention after 5000 cycles. In order to enhance its electrochemical performance for practical application, two composites of YK-1 with graphene oxide (GO) and functionalised multi-walled carbon nanotubes (FCNTs), namely YK-1@GO and YK-1@FCNT, were fabricated by employing a facile ultrasonication technique. The as-synthesized MOF and the composites were characterized by PXRD, FTIR, SEM, and TEM techniques. YK-1@GO and YK-1@FCNT offer enhanced specific capacitances of 488.2 F g-1 and 730.2 F g-1 at the same current density with 93.8% and 97.7% capacity retention after 5000 cycles, respectively (at 16 A g-1). Fascinated by the outstanding results shown by YK-1@FCNT, a symmetric supercapacitor device (SSC) based on it was fabricated. The assembled SSC achieved a remarkable energy density (87.6 W h kg-1) and power density (750.2 W kg-1) at a current density of 1 A g-1, along with very good cycling stability of 91.4% even after 5000 GCD cycles. The SSC device was able to power up several LED lights and even operated a DC brushless fan for a significant amount of time. To the best of our knowledge, the assembled SSC device exhibits the highest energy density among the MOF composite-based SSCs reported so far.

Fabrication of Unique Mixed-Valent CoICoII and CuICuII Metal-Organic Frameworks (MOFs) for Desulfurization of Fuels: A Combined Experimental and Theoretical Approach toward Green Fuel.

Herein, metal-organic framework (MOF)-based adsorbents are designed with distinct hard and soft metal building units, namely, [Co2ICoII(PD)2(BP)] (Co_PD-BP) and [Cu2ICuII(PD)2(BP)] (Cu_PD-BP), where H2PD = pyrazine-1,4-diide-2,3-dicarboxylic acid and BP = 4,4'-bipyridine. The designed MOFs were characterized via spectral and SCXRD techniques, which confirm the mixed-valent states (+1 and +2) of the metal ions. Topological analysis revealed the rare ths and gwg topologies for Co MOF, while Cu-MOF exhibits a unique 8T21 topology in the 8-c net (point symbol for net: {424·64}). Moreover, severe environmental issues can be resolved by effectively removing heterocyclic organosulfur compounds from fuels via adsorptive desulfurization. Further, the developed MOFs were investigated for sulfur removal via adsorptive desulfurization from a model fuel consisting of dibenzothiophene (DBT), benzothiophene (BT), and thiophene (T) in the liquid phase using n-octane as a solvent. The findings revealed that Cu_PD-BP effectively removes the DBT with a removal efficiency of 86% at 300 ppm and an operating temperature of 25 °C, with a recyclability of up to four cycles. The adsorption kinetic analysis showed that the pseudo-first-order model could fit better with the experimental data indicating the physisorption process. Further, the studies revealed that adsorption capacity increased with the increasing initial DBT concentration with a remarkable capacity of 70.5 mg/g, and the adsorption process was well described by the Langmuir isotherm. The plausible reason behind the enhanced removal efficiency shown by Cu_PD-BP as compared to Co_PD-BP could be the soft-soft interactions between soft sulfur and soft Cu metal centers. Interestingly, density functional theory (DFT) studies were done in order to predict the mechanism of binding of thiophenic compounds with Cu_PD-BP, which further ascertained that along with other interactions, the S···π and S···Cu interactions predominate, resulting in a high uptake of DBT as compared to others. In essence, Cu_PD-BP turns out to be a promising adsorbent in the field of fuel desulfurization for the benefit of mankind.

Myeloid cell deficiency of the inflammatory transcription factor Stat4 protects long-term synaptic plasticity from the effects of a high-fat, high-cholesterol diet.

Neuroinflammation is associated with neurodegenerative diseases, including Alzheimer's and Parkinson's. The cytokine interleukin-12 activates signal transducer and activator of transcription 4 (Stat4), and consumption of a high-fat, high-cholesterol diet (HFD-C) and Stat4 activity are associated with inflammation, atherosclerosis, and a diabetic metabolic phenotype. In studies of in vitro hippocampal slices from control Stat4fl/flLdlr-/- mice fed a HFD-C diabetogenic diet, we show that Schaffer collateral-CA1 synapses exhibited larger reductions in activity-dependent, long-term potentiation (LTP) of synaptic transmission, compared to mice fed a standard diet. Glucose tolerance and insulin sensitivity shifts produced by HFD-C diet were reduced in Stat4ΔLysMLdlr-/- mice compared to Stat4fl/flLdlr-/- controls. Stat4ΔLysMLdlr-/- mice, which lack Stat4 under control of the LysMCre promoter, were resistant to HFD-C induced impairments in LTP. In contrast, Schaffer collateral-CA1 synapses in Stat4ΔLysMLdlr-/- mice fed the HFD-C diet showed larger LTP than control Stat4fl/flLdlr-/- mice. Expression of a number of neuroinflammatory and synaptic plasticity genes was reduced by HFD-C diet in control mice, and less affected by HFD-C diet in Stat4ΔLysMLdlr-/- mice. These data suggest that suppression of Stat4 activation may protect against effects of Western diet on cognition, type 2 diabetes, and reduce risk of Alzheimer's disease and other neurodegenerative disorders associated with neuroinflammation.