RESUMEN
Programming protein nanomaterials to respond to changes in environmental conditions is a current challenge for protein design and is important for targeted delivery of biologics. Here we describe the design of octahedral non-porous nanoparticles with a targeting antibody on the two-fold symmetry axis, a designed trimer programmed to disassemble below a tunable pH transition point on the three-fold axis, and a designed tetramer on the four-fold symmetry axis. Designed non-covalent interfaces guide cooperative nanoparticle assembly from independently purified components, and a cryo-EM density map closely matches the computational design model. The designed nanoparticles can package protein and nucleic acid payloads, are endocytosed following antibody-mediated targeting of cell surface receptors, and undergo tunable pH-dependent disassembly at pH values ranging between 5.9 and 6.7. The ability to incorporate almost any antibody into a non-porous pH-dependent nanoparticle opens up new routes to antibody-directed targeted delivery.
RESUMEN
Many naturally occurring protein assemblies have dynamic structures that allow them to perform specialized functions. For example, clathrin coats adopt a wide variety of architectures to adapt to vesicular cargos of various sizes. Although computational methods for designing novel self-assembling proteins have advanced substantially over the past decade, most existing methods focus on designing static structures with high accuracy. Here we characterize the structures of three distinct computationally designed protein assemblies that each form multiple unanticipated architectures, and identify flexibility in specific regions of the subunits of each assembly as the source of structural diversity. Cryo-EM single-particle reconstructions and native mass spectrometry showed that only two distinct architectures were observed in two of the three cases, while we obtained six cryo-EM reconstructions that likely represent a subset of the architectures present in solution in the third case. Structural modeling and molecular dynamics simulations indicated that the surprising observation of a defined range of architectures, instead of non-specific aggregation, can be explained by constrained flexibility within the building blocks. Our results suggest that deliberate use of structural flexibility as a design principle will allow exploration of previously inaccessible structural and functional space in designed protein assemblies.
RESUMEN
Computationally designed multi-subunit assemblies have shown considerable promise for a variety of applications, including a new generation of potent vaccines. One of the major routes to such materials is rigid body sequence-independent docking of cyclic oligomers into architectures with point group or lattice symmetries. Current methods for docking and designing such assemblies are tailored to specific classes of symmetry and are difficult to modify for novel applications. Here we describe RPXDock, a fast, flexible, and modular software package for sequence-independent rigid-body protein docking across a wide range of symmetric architectures that is easily customizable for further development. RPXDock uses an efficient hierarchical search and a residue-pair transform (RPX) scoring method to rapidly search through multidimensional docking space. We describe the structure of the software, provide practical guidelines for its use, and describe the available functionalities including a variety of score functions and filtering tools that can be used to guide and refine docking results towards desired configurations.
Asunto(s)
Algoritmos , Nanoestructuras , Conformación Proteica , Proteínas/química , Programas Informáticos , Unión Proteica , Simulación del Acoplamiento MolecularRESUMEN
DNA origami is an extremely versatile nanoengineering tool with widespread applicability in various fields of research, including membrane physiology and biophysics. The possibility to easily modify DNA strands with lipophilic moieties enabled the recent development of a variety of membrane-active DNA origami devices. Biological membranes, as the core barriers of the cells, display vital structural and functional roles. Therefore, lipid bilayers are widely popular targets of DNA origami nanotechnology for synthetic biology and biomedical applications. In this chapter, we summarize the typical experimental methods used to investigate the interaction of DNA origami with synthetic membrane models. Herein, we present detailed protocols for the production of lipid model membranes and characterization of membrane-targeted DNA origami nanostructures using different microscopy approaches.
Asunto(s)
Nanoestructuras , Nanoestructuras/química , ADN/química , Nanotecnología/métodos , Membrana Dobles de Lípidos/química , Membrana Celular/química , Conformación de Ácido NucleicoRESUMEN
Programming protein nanomaterials to respond to changes in environmental conditions is a current challenge for protein design and important for targeted delivery of biologics. We describe the design of octahedral non-porous nanoparticles with the three symmetry axes (four-fold, three-fold, and two-fold) occupied by three distinct protein homooligomers: a de novo designed tetramer, an antibody of interest, and a designed trimer programmed to disassemble below a tunable pH transition point. The nanoparticles assemble cooperatively from independently purified components, and a cryo-EM density map reveals that the structure is very close to the computational design model. The designed nanoparticles can package a variety of molecular payloads, are endocytosed following antibody-mediated targeting of cell surface receptors, and undergo tunable pH-dependent disassembly at pH values ranging between to 5.9-6.7. To our knowledge, these are the first designed nanoparticles with more than two structural components and with finely tunable environmental sensitivity, and they provide new routes to antibody-directed targeted delivery.
RESUMEN
Self-assembling polyhedral protein biomaterials have gained attention as engineering targets owing to their naturally evolved sophisticated functions, ranging from protecting macromolecules from the environment to spatially controlling biochemical reactions. Precise computational design of de novo protein polyhedra is possible through two main types of approaches: methods from first principles, using physical and geometrical rules, and more recent data-driven methods based on artificial intelligence (AI), including deep learning (DL). Here, we retrospect first principle- and AI-based approaches for designing finite polyhedral protein assemblies, as well as advances in the structure prediction of such assemblies. We further highlight the possible applications of these materials and explore how the presented approaches can be combined to overcome current challenges and to advance the design of functional protein-based biomaterials.
Asunto(s)
Inteligencia Artificial , Proteínas , Proteínas/química , Materiales BiocompatiblesRESUMEN
Computationally designed protein nanoparticles have recently emerged as a promising platform for the development of new vaccines and biologics. For many applications, secretion of designed nanoparticles from eukaryotic cells would be advantageous, but in practice, they often secrete poorly. Here we show that designed hydrophobic interfaces that drive nanoparticle assembly are often predicted to form cryptic transmembrane domains, suggesting that interaction with the membrane insertion machinery could limit efficient secretion. We develop a general computational protocol, the Degreaser, to design away cryptic transmembrane domains without sacrificing protein stability. The retroactive application of the Degreaser to previously designed nanoparticle components and nanoparticles considerably improves secretion, and modular integration of the Degreaser into design pipelines results in new nanoparticles that secrete as robustly as naturally occurring protein assemblies. Both the Degreaser protocol and the nanoparticles we describe may be broadly useful in biotechnological applications.
Asunto(s)
Nanopartículas , Vacunas , Proteínas , Nanopartículas/químicaRESUMEN
Organizing matter at the atomic scale is a central goal of nanotechnology. Bottom-up approaches, in which molecular building blocks are programmed to assemble via supramolecular interactions, are a proven and versatile route to new and useful nanomaterials. Although a wide variety of molecules have been used as building blocks, proteins have several intrinsic features that present unique opportunities for designing nanomaterials with sophisticated functions. There has been tremendous recent progress in designing proteins to fold and assemble to highly ordered structures. Here we review the leading approaches to the design of closed polyhedral protein assemblies, highlight the importance of considering the assembly process itself, and discuss various applications and future directions for the field. We emphasize throughout the exciting opportunities presented by recent advances as well as challenges that remain.
Asunto(s)
Nanoestructuras , Nanotecnología , ProteínasRESUMEN
Here, biophysical properties of membranes enriched in three metabolically related sterols are analyzed both in vitro and in vivo. Unlike cholesterol and ergosterol, the common metabolic precursor zymosterol is unable to induce the formation of a liquid ordered (l o) phase in model lipid membranes and can easily accommodate in a gel phase. As a result, Zym has a marginal ability to modulate the passive membrane permeability of lipid vesicles with different compositions, contrary to cholesterol and ergosterol. Using fluorescence-lifetime imaging microscopy of an aminostyryl dye in living mammalian and yeast cells we established a close parallel between sterol-dependent membrane biophysical properties in vivo and in vitro. This approach unraveled fundamental differences in yeast and mammalian plasma membrane organization. It is often suggested that, in eukaryotes, areas that are sterol-enriched are also rich in sphingolipids, constituting highly ordered membrane regions. Our results support that while cholesterol is able to interact with saturated lipids, ergosterol seems to interact preferentially with monounsaturated phosphatidylcholines. Taken together, we show that different eukaryotic kingdoms developed unique solutions for the formation of a sterol-rich plasma membrane, a common evolutionary trait that accounts for sterol structural diversity.
RESUMEN
In bottom-up synthetic biology, one of the major methodological challenges is to provide reaction spaces that mimic biological systems with regard to topology and surface functionality. Of particular interest are cell- or organelle-shaped membrane compartments, as many protein functions unfold at lipid interfaces. However, shaping artificial cell systems using materials with non-intrusive physicochemical properties, while maintaining flexible lipid interfaces relevant to the reconstituted protein systems, is not straightforward. Herein, we develop micropatterned chambers from CYTOP, a less commonly used polymer with good chemical resistance and a refractive index matching that of water. By forming a self-assembled lipid monolayer on the polymer surface, we dramatically increased the biocompatibility of CYTOP-fabricated systems. The phospholipid interface provides an excellent passivation layer to prevent protein adhesion to the hydrophobic surface, and we succeeded in cell-free protein synthesis inside the chambers. Importantly, the chambers could be sealed after loading by a lipid monolayer, providing a novel platform to study encapsulated systems. We successfully reconstituted pole-to-pole oscillations of the Escherichia coli MinDE system, which responds dramatically to compartment geometry. Furthermore, we present a simplified fabrication of our artificial cell compartments via replica molding, making it a readily accessible technique for standard cleanroom facilities.
Asunto(s)
Polímeros/química , Escherichia coli/química , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Fluorescente , Fosfolípidos/química , Fotoblanqueo , Liposomas Unilamelares/químicaRESUMEN
DNA nanostructures offer the possibility to mimic functional biological membrane components due to their nanometer-precise shape configurability and versatile biochemical functionality. Here we show that the diffusional behavior of DNA nanostructures and their assembly into higher order membrane-bound lattices can be controlled in a stop-and-go manner and that the process can be monitored with super-resolution imaging. The DNA structures are transiently immobilized on glass-supported lipid bilayers by changing the mono- and divalent cation concentrations of the surrounding buffer. Using DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) super-resolution microscopy, we confirm the fixation of DNA origami structures with different shapes. On mica-supported lipid bilayers, in contrast, we observe residual movement. By increasing the concentration of NaCl and depleting MgCl2, a large fraction of DNA structures restarts to diffuse freely on both substrates. After addition of a set of oligonucleotides that enables three Y-shaped monomers to assemble into a three-legged shape (triskelion), the triskelions can be stopped and super-resolved. Exchanging buffer and adding another set of oligonucleotides triggers the triskelions to diffuse and assemble into hexagonal 2D lattices. This stop-and-go imaging technique provides a way to control and observe the diffusional behavior of DNA nanostructures on lipid membranes that could also lead to control of membrane-associated cargos.
Asunto(s)
ADN/química , Nanoestructuras/química , ADN/síntesis química , Difusión , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Single-particle plasmon spectroscopy has become a standard technique to detect and quantify the presence of unlabeled macromolecules. Here, we extend this method to determine their exact distance from the plasmon sensors with sub-nanometer resolution by systematically varying the sensing range into the surrounding by adjusting the size of the plasmonic nanoparticles. We improved current single-particle plasmon spectroscopy to record continuously for hours the scattering spectra of thousands of nanoparticles of different sizes simultaneously with 1.8 s time resolution. We apply this technique to study the interaction dynamics of bacterial Min proteins with supported lipid membranes of different composition. Our experiments reveal a surprisingly flexible operating mode of the Min proteins: In the presence of cardiolipin and membrane curvature induced by nanoparticles, the protein oscillation occurs on top of a stationary MinD patch. Our results reveal the need to consider membrane composition and local curvature as important parameters to quantitatively understand the Min protein system and could be extrapolated to other macromolecular systems. Our label-free method is generally easily implementable and well suited to measure distances of interacting biological macromolecules.
RESUMEN
DNA origami nanotechnology is being increasingly used to mimic membrane-associated biophysical phenomena. Although a variety of DNA origami nanostructures has already been produced to target lipid membranes, the requirements for membrane binding have so far not been systematically assessed. Here, we used a set of elongated DNA origami structures with varying placement and number of cholesteryl-based membrane anchors to compare different strategies for their incorporation. Single and multiple cholesteryl anchors were attached to DNA nanostructures using single- and double-stranded DNA spacers of varying length. The produced DNA nanostructures were studied in terms of their membrane binding and diffusion. Our results show that the location and number of anchoring moieties play a crucial role for membrane binding of DNA nanostructures mainly if the cholesteryl anchors are in close proximity to the bulky DNA nanostructures. Moreover, the use of DNA spacers largely overcomes local steric hindrances and thus enhances membrane binding. Fluorescence correlation spectroscopy measurements demonstrate that the distinct physical properties of single- and double-stranded DNA spacers control the interaction of the amphipathic DNA nanostructures with lipid membranes. Thus, we provide a rational basis for the design of amphipathic DNA origami nanostructures to efficiently bind lipid membranes in various environments.
Asunto(s)
Colesterol/análogos & derivados , ADN de Cadena Simple/metabolismo , Nanoestructuras/química , Liposomas Unilamelares/metabolismo , ADN de Cadena Simple/química , Difusión , Ácidos Grasos Monoinsaturados/química , Estructura Molecular , Conformación de Ácido Nucleico , Fosfatidilcolinas/química , Fosfatidilserinas/química , Polietilenglicoles/química , Compuestos de Amonio Cuaternario/química , Liposomas Unilamelares/químicaRESUMEN
In vitro membrane model systems are used to dissect complex biological phenomena under controlled unadulterated conditions. In this context, lipid monolayers are a powerful tool to particularly study the influence of lipid packing on the behavior of membrane proteins. Here, monolayers deposited in miniaturized fixed area-chambers, which require only minute amounts of protein, were used and shown to faithfully reproduce the characteristics of Langmuir monolayers. This assay is ideally suited to be combined with single-molecule sensitive fluorescence correlation spectroscopy (FCS) to characterize diffusion dynamics. Our results confirm the influence of lipid packing on lipid mobility and validate the use of FCS as an alternative to conventional surface pressure measurements for characterizing the monolayer. Furthermore, we demonstrate the effect of lipid density on the diffusional behavior of membrane-bound components. We exploit the sensitivity of FCS to characterize protein interactions with the lipid monolayer in a regime in which the monolayer physical properties are not altered. To demonstrate the potential of our approach, we analyzed the diffusion behavior of objects of different nature, ranging from a small peptide to a large DNA-based nanostructure. Moreover, in this work we quantify the surface viscosity of lipid monolayers. We present a detailed strategy for the conduction of point FCS experiments on lipid monolayers, which is the first step toward extensive studies of protein-monolayer interactions.
Asunto(s)
Lípidos/química , Proteínas de la Membrana/metabolismo , Movimiento , Difusión , Hidrodinámica , Presión , Espectrometría de Fluorescencia , Propiedades de SuperficieRESUMEN
Membrane sculpting and transformation is essential for many cellular functions, thus being largely regulated by self-assembling and self-organizing protein coats. Their functionality is often encoded by particular spatial structures. Prominent examples are BAR domain proteins, the 'banana-like' shapes of which are thought to aid scaffolding and membrane tubulation. To elucidate whether 3D structure can be uncoupled from other functional features of complex scaffolding proteins, we hereby develop curved DNA origami in various shapes and stacking features, following the presumable design features of BAR proteins, and characterize their ability for membrane binding and transformation. We show that dependent on curvature, membrane affinity and surface density, DNA origami coats can indeed reproduce the activity of membrane-sculpting proteins such as BAR, suggesting exciting perspectives for using them in bottom-up approaches towards minimal biomimetic cellular machineries.
Asunto(s)
Membrana Celular/química , ADN/química , Línea Celular , Membrana Celular/metabolismo , ADN/genética , Humanos , Proteínas de la Membrana/química , Proteínas de la Membrana/metabolismo , Microscopía Fluorescente , Conformación de Ácido NucleicoRESUMEN
The cell membrane is a heterogeneously organized composite with lipid-protein micro-domains. The contractile actin cortex may govern the lateral organization of these domains in the cell membrane, yet the underlying mechanisms are not known. We recently reconstituted minimal actin cortices (MACs) (Vogel et al., 2013b) and here advanced our assay to investigate effects of rearranging actin filaments on the lateral membrane organization by introducing various phase-separated lipid mono- and bilayers to the MACs. The addition of actin filaments reorganized membrane domains. We found that the process reached a steady state where line tension and lateral crowding balanced. Moreover, the phase boundary allowed myosin driven actin filament rearrangements to actively move individual lipid domains, often accompanied by their shape change, fusion or splitting. Our findings illustrate how actin cortex remodeling in cells may control dynamic rearrangements of lipids and other molecules inside domains without directly binding to actin filaments.
Asunto(s)
Actomiosina/metabolismo , Biomimética , Membrana Celular/metabolismo , Microdominios de Membrana/metabolismoRESUMEN
Recent research regarding 2-hydroxylated fatty acids (2OHFAs) showed clear evidence of their benefits in the treatment of cancer, inflammation, and neurodegenerative disorders such as Alzheimer's disease. Monolayer compressibility isotherms and isothermal titration calorimetry of 2OHFA (C18-C22) in phosphatidylcholine/phosphatidylethanolamine/sphingomyelin/cholesterol (1:1:1:1 mole ratio), a mixture that mimics the composition of mammalian plasma membrane, were performed to assess the membrane binding capacity of 2OHFAs and their natural, nonhydroxylated counterparts. The results show that 2OHFAs are surface-active substances that bind membranes through exothermic, spontaneous processes. The main effects of 2OHFAs are a decrease in lipid order, with a looser packing of the acyl chains, and a decreased dipole potential, regardless of the 2OHFAs' relative affinity for the lipid bilayer. The strongest effects are usually observed for 2-hydroxyarachidonic (C20:4) acid, and the weakest one, for 2-hydroxydocosahexaenoic acid (C22:6). In addition, 2OHFAs cause increased hydration, except in gel-phase membranes, which can be explained by the 2OHFA preference for membrane defects. Concerning the membrane dipole potential, the magnitude of the reduction induced by 2OHFAs was particularly marked in the liquid-ordered (lo) phase (cholesterol/sphingomyelin-rich) membranes, those where order reduction was the smallest, suggesting a disruption of cholesterol-sphingolipid interactions that are responsible for the large dipole potential in those membranes. Moreover, 2OHFA effects were larger than for both lo and ld phases separately in model membranes with liquid disordered (ld)/lo coexistence when both phases were present in significant amounts, possibly because of the facilitating effect of ld/lo domain interfaces. The specific and marked changes induced by 2OHFAs in several membrane properties suggest that the initial interaction with the membrane and subsequent reorganization might constitute an important step in their mechanisms of action.