Porous Polylactide Microparticles as Effective Fillers for Hydrogels.

High-strength composite hydrogels based on collagen or chitosan-genipin were obtained via mixing using highly porous polylactide (PLA) microparticles with diameters of 50-75 µm and porosity values of over 98%. The elastic modulus of hydrogels depended on the filler concentration. The modulus increased from 80 kPa to 400-600 kPa at a concentration of porous particles of 12-15 wt.% and up to 1.8 MPa at a filling of 20-25 wt.% for collagen hydrogels. The elastic modulus of the chitosan-genipin hydrogel increases from 75 kPa to 900 kPa at a fraction of particles of 20 wt.%. These elastic modulus values cover a range of strength properties from connective tissue to cartilage tissue. It is important to note that the increase in strength in this case is accompanied by a decrease in the density of the material, that is, an increase in porosity. PLA particles were loaded with C-phycocyanin and showed an advanced release profile up to 48 h. Thus, composite hydrogels mimic the structure, biomechanics and release of biomolecules in the tissues of a living organism.

How the Nonwoven Polymer Volume Microstructure Is Transformed under Tension in an Aqueous Environment.

The fibrous porous structure of polymers can mimic the extracellular matrix of the native tissue, therefore such polymers have a good potential for use in regenerative medicine. Organs and tissues within the body exhibit different mechanical properties depending on their functionality, thus artificial scaffolds should have mechanical behaviors similar to the extracellular matrix in conditions like living organisms, primarily in aqueous media. Several methods have been investigated in aquatic environments, including noninvasive techniques based on ultrasonic focused beams for biological objectives. In this study we explored the tensile behavior of poly(L-lactide) nonwoven polymer scaffolds using high-frequency ultrasound microscopy combined with a horizontal testing machine, which provided a visualization of the reorganization and transformation of the dynamic volume microstructure. The mechanisms of unwinding, elongation, orientation, and deformation of polymer fibers under uniaxial tension were revealed. We observed an association between the lined plastic deformation from 100 to 400% and the formation of multiple necks in the fibers, which caused stress relaxation and significant rarefaction of the fibrous microstructure. It was shown that both peaks on the stress-strain curve corresponded to the microstructure of aligned fibers in terms of initial diameter and thinning fibers. We discuss the possible influence of these microstructure transformations on cell behavior.

Noninvasive high-frequency acoustic microscopy for 3D visualization of microstructure and estimation of elastic properties during hydrolytic degradation of lactide and ε-caprolactone polymers.

The monitoring of degradation processes' kinetics in polymers is one of the attractive possibilities of ultrasound technique applications that provide non-destructive imaging of polymers' internal microstructure and measurements of elastic properties. In this work, biodegradable polymers and copolymers based on L,L-lactide, D,L-lactide and ε-caprolactone have been studied at different stages of hydrolysis at 37 °C by high-frequency (100 and 200 MHz) ultrasound. The acoustic microscopy technique has been developed to reveal changes in the internal microstructure and bulk sound speed in polymer samples over a hydrolysis period of 25 weeks. Ultrasound imaging provides visualization of amorphous and crystalline phases, internal imperfections, variation in packing density, and other microstructural features. Acoustic images demonstrate nucleation, growth, and the changes in internal inhomogeneities in polymers during degradation accompanied by a decrease in the polymers' molecular weight. We associate the changes in the elastic properties (the speed of a longitudinal wave) with crystallinity variations in polymers during hydrothermal aging. The results of the ultrasound investigations are supplemented by gel permeation chromatography, differential scanning calorimetry, and wide-angle X-ray spectroscopy. STATEMENT OF SIGNIFICANCE: Monitoring the kinetics of degradation processes in polymers is one of the attractive possibilities of applying ultrasound techniques that provide non-destructive imaging of the polymers' internal microstructure and measurements of elastic properties. In this work, visualization of nucleation, growth, and evolution of internal inhomogeneities in the volume of polymers and variation of values of speed of longitudinal and transverse sound waves during hydrolysis are compared with measurements of molecular weight, density, data of DSC curves, and X-ray scattering analysis. We discuss several common phenomena that occur in the volume of poly(L-lactide) and poly(D,L-lactide) over the degradation process as well as improvement of elastic properties of the poly(ε -caprolactone) and poly(L-lactide-co-caprolactone) during hydrothermal aging.

Noninvasive ultrasound imaging for assessment of intact microstructure of extracellular matrix in tissue engineering.

Development of artificial tissues or organs is one of the actual tasks in regenerative medicine that requires observation and evaluation of intact volume microstructure of tissue engineering products at all stages of their formation, from native donor tissues and decellularized scaffolds to recipient cell migration in the matrix. Unfortunately in practice, methods of vital noninvasive imaging of volume microstructure in matrixes are absent. In this work, we propose a new approach based on high-frequency acoustic microscopy for noninvasive evaluation and visualization of volume microstructure in tissue engineering products. The results present the ultrasound characterization of native rat diaphragms and lungs and their decellularized scaffolds. Verification of the method for visualization of tissue formation in the matrix volume was described in the model samples of diaphragm scaffolds with stepwise collagenization. Results demonstrate acoustic microscopic sensitivity to cell content concentration, variation in local density, and orientation of protein fibers in the volume, micron air inclusions, and other inhomogeneities of matrixes.