Optical transition between singlet and triplet is observed in phosphorescent platinum octaethylporphyrin (PtOEP), on a graphene substrate. PtOEP on single layer of graphene not only modulates the dominant emission wavelength but also enhances the emission intensity. This result addresses new light-matter interactions of the hybrid structure of graphene and a single molecule.
3D interference printing enables the single-step production of multilayered ultralong nanochannel arrays with nanoscale regularity. The superior depth-of-focus of this technique realizes a state-of-the-art nanostructure which has intensively stacked 32 layers of inch-long, horizonontal nanochannels with sub-100 nm holes in a monolithic matrix (≈15 µm). This exceptional structure can be integrated into microfluidic devices, facilitating high-flux rheological platforms using nanocapillarity.
Controllable bandgap widening from 1.8 to 2.6 eV is reported from oxidized MoS2 sheets that are composed of quilted phases of various MoSxOy flakes. The exfoliated flakes have large size (≥100 µm × 100 µm) sheets with average thickness of 1.7 nm. Remarkably, fine reversible tuning of the bandgap is achieved by postprocessing sulfurization of the MoSxOy sheets.
High-performance and cost-effective rechargeable batteries are key to the success of electric vehicles and large-scale energy storage systems. Extensive research has focused on the development of (i) new high-energy electrodes that can store more lithium or (ii) high-power nano-structured electrodes hybridized with carbonaceous materials. However, the current status of lithium batteries based on redox reactions of heavy transition metals still remains far below the demands required for the proposed applications. Herein, we present a novel approach using tunable functional groups on graphene nano-platelets as redox centers. The electrode can deliver high capacity of ~250â mAh g⻹, power of ~20â kW kg⻹ in an acceptable cathode voltage range, and provide excellent cyclability up to thousands of repeated charge/discharge cycles. The simple, mass-scalable synthetic route for the functionalized graphene nano-platelets proposed in this work suggests that the graphene cathode can be a promising new class of electrode.
Functionalization of light-emitting poly(3-methylthiophene) (P3MT) nanowires (NWs) with probe-DNA (p-DNA) and their label-free recognition of target-DNA (t-DNA) were correlated quantitatively with both the photoluminescence (PL) color and intensity of P3MT NWs.
Chemistry Techniques, Analytical/instrumentation , DNA/analysis , Light , Nanowires/chemistry , Polymers/chemistry , Thiophenes/chemistry , Aluminum Oxide/chemistry , Benzenesulfonates/chemistry , DNA/chemistry , Electrochemistry , Electrodes , Luminescent Measurements , Quaternary Ammonium Compounds/chemistry
A 2.45 GHz electron cyclotron resonance (ECR) source with a magnetron magnetic field configuration was developed to meet the demand of a hyperthermal neutral beam (HNB) flux on a substrate of more than 1x10(15) cm(-2) s(-1) for industrial applications. The parameters of the operating pressure, ion density, electron temperature, and distance between the neutralization plate and the substrate for the HNB source are specified in a theoretical analysis. The electron temperature and the ion density are measured to characterize the ECR HNB source using a Langmuir probe and optical emission spectroscopy. The parameters of the ECR HNB source are in good agreement with the theoretically specified parameters.
We report on the light-emitting color barcode nanowires (LECB-NWs), which were fabricated by alternating the electrochemical polymerization of light-emitting polymers with various luminescence colors and efficiencies. The nanoscale photoluminescence characteristics of LECB-NWs were investigated using a laser confocal microscope with a high spatial resolution. The alternating light emissions of the LECB-NWs showed orange-yellow, red, and green colors due to the serial combination of poly(3-butylthiophene), poly(3-methylthiophene), and poly(3,4-ethylenedioxythiophene), respectively, with distinct luminescence intensities. The optical detection sensitivity and stability of LECB-NWs have been enhanced through a nanoscale Cu metal coating onto the NWs, based on surface plasmon resonance coupling and protection against oxidation. The flexibility of the LECB-NWs has been investigated through the folding and unfolding of the NWs by an applied nanotip impetus. The flexible LECB-NWs can be used as highly sensitive optical identification nanosystems for nanoscale or microscale products with complex physical shapes.
Electronic Data Processing/methods , Light , Nanotechnology/methods , Nanowires/chemistry , Optical Phenomena , Polymers/chemistry , Color , Copper/chemistry , Elasticity , Energy Transfer
Two types of non-close-packed colloidal crystal films were prepared by etching the films made of polystyrene nanospheres using a hyperthermal neutral beam of oxygen gas. Etching without sintering above glass transition temperature of the polymer particles resulted in the non-close-packed structure of the nanospheres, in which polystyrene nanospheres in different lattice planes touched each other due to the reduction in the size of the nanospheres that occurred during the etching process. In contrast, a different non-close-packed structure with inter-connecting networks between etched nanospheres was generated by annealing of the colloidal crystal and a subsequent etching process. The photonic bandgap could be tuned during this dry etching of colloidal photonic crystals. This connected open structure could be used as a template for a silica inverse opal by chemical vapor deposition. An alternative dry etching process, reactive ion etching, mainly affected the morphology of particles near the top surface, and only a slight change in the stop band position of the colloidal crystal film was observed.
The enhanced nanometer-scale photoluminescence (PL) and quantum yield of hybrid double layered nanotubes (HDLNTs) consisting of a light-emitting poly(3-methylthiophene) (P3MT) nanotube coated with nanometer-scale copper (Cu) metal were observed and presented. The HDLNTs of the Cu coated P3MT (P3MT/Cu) were synthesized through a sequential electrochemical synthetic method in an anodic alumina oxide (Al2O3) nanoporous template. We confirmed that the Cu nanotubes were covered outside the light emitting P3MT nanotubes based a high resolution transmission electron microscope image. From laser confocal microscope (LCM) PL experiments of an isolated single strand of the P3MT nanotubes and of their HDLNTs, we observed a -100 times enhancement of the PL peak intensity for the HDLNTs of P3MT/Cu compared to that of the P3MT single nanotube, which was qualitatively confirmed through the measurement of the quantum yield. The energy and/or charge transfer effects in surface plasmon resonance contributed to the larger enhancement of the PL efficiency of the hybrid P3MT/Cu nanotubes. The PL decay life-time of the excitons of the P3MT nanotubes using a time resolved PL was not changed after the formation of the HDLNTs, implying that the PL enhancement of the hybrid nanotubes might have originated from fluorescence, not phosphorescence.
Complex nanoparticles (NPs) of poly(2-methoxy-5-(2'-ethylhexyloxy)-p-phenylene vinylene) (MEH-PPV) NP adsorbed with Au NPs (MEH-PPV/Au NPs) were fabricated through a reprecipitation method. The formation of MEH-PPV/Au NP complexes was confirmed through high-resolution transmission electron microscopy and Fourier transform infrared experiments. The laser confocal microscope photoluminescence (PL) efficiency of the complex MEH-PPV/Au single NP dramatically increased compared with that of the MEH-PPV single NP without Au NPs, which was directly confirmed through color charge-coupled device images. The enhanced PL efficiency of the MEH-PPV/Au NP complex might have originated from the energy transfer effect in a surface plasmon resonance coupling between a MEH-PPV NP and Au NPs. The strong local field enhancement due to nanogaps between Au NPs in the background of a light-emitting MEH-PPV NP might be another origin of the PL enhancement of the NP complex, as supported by finite difference time domain calculations. We also observed the blue shift of the PL peaks of the single MEH-PPV and MEH-PPV/Au NP, compared with the solution PL peaks of those NPs.
The authors present the experimental result of improved lateral resolution in laser confocal microscopy (LCM) by using annular and radially polarized light as the input illumination of an existing LCM. The authors examined the lateral resolution of the LCM by imaging a single fluorescent bead and measuring the lateral width of the single bead profile appearing in the optical image. Compared to no aperture and linearly polarized light, the central peak of the single bead profile narrowed by approximately 40%, being as small as 122 nm in full width at half maximum using 405 nm laser excitation in a reflection imaging. In addition, the authors showed that radial polarization helps to preserve the circular shape of the single bead profile whereas linearly polarized light tends to induce an elongation along the polarization direction.
Lasers , Microscopy, Confocal/methods , Microscopy, Polarization/methods
We present the results of optical waveguiding of nanowires/quantum dots hybrid systems which were made by depositing CdTe quantum dots (QDs) on ZnO nanowires (NWs). We used a laser confocal/atomic force combined microscope to image the QD photoluminescence caused by the light propagation along the NW/QD hybrid systems, and the nanoscale topographic images of the samples. The propagation lengths of the samples were estimated and shown to be consistent with measured thickness of the samples.
We report the fabrication of connected open structures from close-packed colloidal crystals by hyperthermal neutral beam etching. Colloidal crystal films of polystyrene microspheres were prepared by a vertical deposition method. Exposure of the colloidal crystal films to hyperthermal neutral beam made isolated microspheres in the face-centered cubic lattice, each of which was connected with its twelve nearest neighbors through very thin cylinders. Due to the charge neutrality of impinging gas molecules of the hyperthermal neutral beam, the spherical shape of polymer microspheres was almost maintained during the etching process. The Bragg reflection peaks were modulated by the etched volume of colloidal crystals. Finally, the inverse structures of such open structures were replicated by a simple room-temperature chemical vapor deposition and subsequently burning out polymer template spheres.
Colloids/chemistry , Microscopy, Electron, Scanning
