Biofabrication of 3D adipose tissue via assembly of composite stem cell spheroids containing adipo-inductive dual-signal delivery nanofibers.

Reconstruction of large 3D tissues based on assembly of micro-sized multi-cellular spheroids has gained attention in tissue engineering. However, formation of 3D adipose tissue from spheroids has been challenging due to the limited adhesion capability and restricted cell mobility of adipocytes in culture media. In this study, we addressed this problem by developing adipo-inductive nanofibers enabling dual delivery of indomethacin and insulin. These nanofibers were introduced into composite spheroids comprising human adipose-derived stem cells (hADSCs). This approach led to a significant enhancement in the formation of uniform lipid droplets, as evidenced by the significantly increased Oil red O-stained area in spheroids incorporating indomethacin and insulin dual delivery nanofibers (56.9 ± 4.6%) compared to the control (15.6 ± 3.5%) with significantly greater gene expression associated with adipogenesis (C/EBPA, PPARG, FABP4, and adiponectin) of hADSCs. Furthermore, we investigated the influence of culture media on the migration and merging of spheroids and observed significant decrease in migration and merging of spheroids in adipogenic differentiation media. Conversely, the presence of adipo-inductive nanofibers promoted spheroid fusion, allowing the formation of macroscopic 3D adipose tissue in the absence of adipogenic supplements while facilitating homogeneous adipogenesis of hADSCs. The approach described here holds promise for the generation of 3D adipose tissue constructs by scaffold-free assembly of stem cell spheroids with potential applications in clinical and organ models.

Cell-homing and immunomodulatory composite hydrogels for effective wound healing with neovascularization.

Wound healing in cases of excessive inflammation poses a significant challenge due to compromised neovascularization. Here, we propose a multi-functional composite hydrogel engineered to overcome such conditions through recruitment and activation of macrophages with adapted degradation of the hydrogel. The composite hydrogel (G-TSrP) is created by combining gelatin methacryloyl (GelMA) and nanoparticles (TSrP) composed of tannic acid (TA) and Sr2+. These nanoparticles are prepared using a one-step mineralization process assisted by metal-phenolic network formation. G-TSrP exhibits the ability to eliminate reactive oxygen species and direct polarization of macrophages toward M2 phenotype. It has been observed that the liberation of TA and Sr2+ from G-TSrP actively facilitate the recruitment and up-regulation of the expression of extracellular matrix remodeling genes of macrophages, and thereby, coordinate in vivo adapted degradation of the G-TSrP. Most significantly, G-TSrP accelerates angiogenesis despite the TA's inhibitory properties, which are counteracted by the released Sr2+. Moreover, G-TSrP enhances wound closure under inflammation and promotes normal tissue formation with strong vessel growth. Genetic analysis confirms macrophage-mediated wound healing by the composite hydrogel. Collectively, these findings pave the way for the development of biomaterials that promote wound healing by creating regenerative environment.

Engineering pre-vascularized 3D tissue and rapid vascular integration with host blood vessels via co-cultured spheroids-laden hydrogel.

Recent advances in regenerative medicine and tissue engineering have enabled the biofabrication of three-dimensional (3D) tissue analogues with the potential for use in transplants and disease modeling. However, the practical use of these biomimetic tissues has been hindered by the challenge posed by reconstructing anatomical-scale micro-vasculature tissues. In this study, we suggest that co-cultured spheroids within hydrogels hold promise for regenerating highly vascularized and innervated tissues, bothin vitroandin vivo. Human adipose-derived stem cells (hADSCs) and human umbilical vein cells (HUVECs) were prepared as spheroids, which were encapsulated in gelatin methacryloyl hydrogels to fabricate a 3D pre-vascularized tissue. The vasculogenic responses, extracellular matrix production, and remodeling depending on parameters like co-culture ratio, hydrogel strength, and pre-vascularization time forin vivointegration with native vessels were then delicately characterized. The co-cultured spheroids with 3:1 ratio (hADSCs/HUVECs) within the hydrogel and with a pliable storage modulus showed the greatest vasculogenic potential, and ultimately formedin vitroarteriole-scale vasculature with a longitudinal lumen structure and a complex vascular network after long-term culturing. Importantly, the pre-vascularized tissue also showed anastomotic vascular integration with host blood vessels after transplantation, and successful vascularization that was positive for both CD31 and alpha-smooth muscle actin covering 18.6 ± 3.6µm2of the luminal area. The described co-cultured spheroids-laden hydrogel can therefore serve as effective platform for engineering 3D vascularized complex tissues.

Composite Spheroid-Laden Bilayer Hydrogel for Engineering Three-Dimensional Osteochondral Tissue.

A combination of hydrogels and stem cell spheroids has been used to engineer three-dimensional (3D) osteochondral tissue, but precise zonal control directing cell fate within the hydrogel remains a challenge. In this study, we developed a composite spheroid-laden bilayer hydrogel to imitate osteochondral tissue by spatially controlled differentiation of human adipose-derived stem cells. Meticulous optimization of the spheroid-size and mechanical strength of gelatin methacryloyl (GelMA) hydrogel enables the cells to homogeneously sprout within the hydrogel. Moreover, fibers immobilizing transforming growth factor beta-1 (TGF-ß1) or bone morphogenetic protein-2 (BMP-2) were incorporated within the spheroids, which induced chondrogenic or osteogenic differentiation of cells in general media, respectively. The spheroids-filled GelMA solution was crosslinked to create the bilayer hydrogel, which demonstrated a strong interfacial adhesion between the two layers. The cell sprouting enhanced the adhesion of each hydrogel, demonstrated by increase in tensile strength from 4.8 ± 0.4 to 6.9 ± 1.2 MPa after 14 days of culture. Importantly, the spatially confined delivery of BMP-2 within the spheroids increased mineral deposition and more than threefold enhanced osteogenic genes of cells in the bone layer while the cells induced by TGF-ß1 signals were apparently differentiated into chondrocytes within the cartilage layer. The results suggest that our composite spheroid-laden hydrogel could be used for the biofabrication of osteochondral tissue, which can be applied to engineer other complex tissues by delivery of appropriate biomolecules.

Development of a composite hydrogel incorporating anti-inflammatory and osteoinductive nanoparticles for effective bone regeneration.

BACKGROUND: Bone tissue regeneration is regulated by complex events, including inflammation, osteoinduction, and remodeling. Therefore, to induce the complete restoration of defective bone tissue, biomaterials with the ability to regulate the collective bone regenerative system are beneficial. Although some studies conclude that reducing reactive oxygen species created a favorable environment for bone regeneration by controlling inflammation, biomaterials that can simultaneously promote osteogenesis and regulate inflammation have not been developed. Herein, we describe the development of a multi-functional nanoparticle and its hydrogel composite with osteoinductive, anti-inflammatory, and osteoclast-maturation regulatory functions for enhanced bone regeneration. METHODS: Tannic acid-mineral nanoparticles (TMP) were prepared by self-assembly of tannic acid in an ion-rich simulated body fluid containing Ca2+ and PO43-. Particles with a diameter of 443 ± 91 nm were selected for their stable spherical morphology and minimal tendency to aggregate. The particles were homogeneously embedded within a gelatin-based cryogel (TMP/Gel) to be used in further experiments. The osteoinductive properties, anti-inflammatory and osteoclast-maturation regulatory functions in vitro were tested by culturing corresponding cells on either TMP/Gel or a gelatin-based cryogel without the particles (Gel). For in vivo analyses, a murine calvarial defect model was used. Statistical analyses were carried out using a Graphpad Prism 7 software (San Diego, CA, USA) to perform one-way analysis of variance ANOVA with Tukey's honest significant difference test and a Student's t-test (for two variables) (P < 0.05). RESULTS: Excellent biocompatibility and radical scavenging abilities were exhibited by the TMP/Gel. The expression of osteogenic mRNA is significantly increased in human adipose-derived stem cells seeded on the TMP/Gel compared to those without the particles. Furthermore, RAW264.7 cells seeded on the TMP/Gel displayed significantly lower-than-normal levels of pro-inflammatory and osteoclastogenic genes. Finally, the in vivo results indicated that, compared with the cryogel with no anti-inflammatory effect, the TMP/Gel significantly enhanced both the quality and quantity of newly formed bone, demonstrating the importance of combining anti-inflammation with osteoinduction. CONCLUSION: Collectively, these findings suggest our nanoparticle-hydrogel composite could be an effective tool to regulate complex events within the bone healing process.

Free radical-scavenging composite gelatin methacryloyl hydrogels for cell encapsulation.

Gelatin methacryloyl (GelMA) hydrogels have been widely used for cell encapsulation in tissue engineering due to their cell adhesiveness and biocompatibility. However, free radicals generated during gelation decrease the viability of the encapsulated cells by increasing intracellular oxidative stress, so appropriate strategies for scavenging free radicals need to be developed. To meet that need, we developed composite GelMA hydrogels incorporating nanofiber particles (EF) coated with epigallocatechin-gallate (EGCG). The GelMA composite hydrogels were successfully fabricated and had a storage modulus of about 5 kPa, which is similar to that of pristine GelMA hydrogel, and the drastic free radical scavenging activity of EGCG was highly preserved after gelation. In addition, human adipose-derived stem cells encapsulated within our composite hydrogels had better viability (about 1.5 times) and decreased intracellular oxidative stress (about 0.3 times) compared with cells within the pristine GelMA hydrogel. We obtained similar results with human dermal fibroblasts and human umbilical vein endothelial cells, indicating that our composite hydrogels are suitable for various cell types. Furthermore, we found that the ability of the encapsulated cells to spread and migrate increased by 5 times within the composite hydrogels. Collectively, our results demonstrate that incorporating EF into GelMA hydrogels is a promising way to enhance cell viability by reducing free-radical-derived cellular damage when fabricating 3D tissue ex vivo. STATEMENT OF SIGNIFICANCE: Gelatin methacryloyl (GelMA) hydrogels have been widely applied to various tissue engineering applications because of their biocompatibility and cell interactivity. However, free radicals generated during the GelMA hydrogel fabrication decrease the viability of encapsulated cells by elevating intracellular oxidative stress. Here, we demonstrate radical scavenging GelMA hydrogels incorporating epigallocatechin-gallate (EGCG)-coated nanofiber particles (EF). The composite GelMA hydrogels are successfully fabricated, maintaining their mechanical properties, and the viability of encapsulated human adipose-derived stem cells is greatly improved after the gelation, indicating that our composite GelMA hydrogel alleviates damages from free radicals. Collectively, the incorporation of EF within GelMA hydrogels may be a promising way to enhance the viability of encapsulated cells, which could be applied to 3D tissue fabrication.

Spatially arranged encapsulation of stem cell spheroids within hydrogels for the regulation of spheroid fusion and cell migration.

Mesenchymal stem cell spheroids have been encapsulated in hydrogels for various applications because spheroids demonstrate higher cell activity than individual cells in suspension. However, there is limited information on the effect of distance between spheroids (inter-spheroid distance) on fusion or migration in a hydrogel. In this study, we developed temperature-responsive hydrogels with surface microwell patterns to culture adipose-derived stem cell (ASC) spheroids and deliver them into a Matrigel for the investigation of the effect of inter-spheroid distance on spheroid behavior. The ASC spheroids were encapsulated successfully in a Matrigel, denoted as sandwich culture, with a specific inter-spheroid distance ranging from 100 to 400 µm. Interestingly, ASCs migrated from the host spheroid and formed a bridge-like structure between spheroids, denoted as a cellular bridge, only when the inter-spheroid distance was 200 µm. Thus, we performed a sandwich culture of human umbilical vein endothelial cells (HUVECs) and ASCs in co-cultured spheroids in the Matrigel to create a homogeneous endothelial cell network in the hydrogel. The HUVECs sprouted through the ASC cellular bridge and directly interacted with the adjacent spheroid when the inter-spheroid distance was 200 µm. Similar results were obtained from an in vivo study. Thus, our study suggests the appropriate inter-spheroid distance for effective spheroid encapsulation in a hydrogel. STATEMENT OF SIGNIFICANCE: Recently, spheroid-based 3D tissue culture techniques such as spheroid encapsulation or 3D printing are being intensively investigated for various purposes. However, there is limited research regarding the effect of the inter-spheroid distance on spheroid communication. Here, we demonstrate a spatially arranged spheroid encapsulation method within a Matrigel by using a temperature-responsive hydrogel. Human adipose-derived stem cell spheroids are encapsulated with a precisely controlled inter-spheroid distance from 100 to 400 µm and show different tendencies in cell migration and spheroid fusion. Our results suggest that the inter-spheroid distance affects spheroid communication, and thus, the inter-spheroid distance needs to be considered carefully according to the purpose.

Surface engineering of 3D-printed scaffolds with minerals and a pro-angiogenic factor for vascularized bone regeneration.

Scaffolds functionalized with biomolecules have been developed for bone regeneration but inducing the regeneration of complex structured bone with neovessels remains a challenge. For this study, we developed three-dimensional printed scaffolds with bioactive surfaces coated with minerals and platelet-derived growth factor. The minerals were homogeneously deposited on the surface of the scaffold using 0.01 M NaHCO3 with epigallocatechin gallate in simulated body fluid solution (M2). The M2 scaffold demonstrated enhanced mineral coating amount per scaffold with a greater compressive modulus than the others which used different concentration of NaHCO3. Then, we immobilized PDGF on the mineralized scaffold (M2/P), which enhanced the osteogenic differentiation of human adipose derived stem cells in vitro and promoted the secretion of pro-angiogenic factors. Cells cultured in M2/P showed remarkable ratio of osteocalcin- and osteopontin-positive nuclei, and M2/P-derived medium induced endothelial cells to form tubule structures. Finally, the implanted M2/P scaffolds onto mouse calvarial defects had regenerated bone in 80.8 ± 9.8% of the defect area with the arterioles were formed, after 8 weeks. In summary, our scaffold, which composed of minerals and pro-angiogenic growth factor, could be used therapeutically to improve the regeneration of bone with a highly vascularized structure. STATEMENT OF SIGNIFICANCE: Surface engineered scaffolds have been developed for bone regeneration but inducing the volumetric regeneration of bone with neovessels remains a challenge. In here, we developed 3D printed scaffolds with bioactive surfaces coated with bio-minerals and platelet-derived growth factors. We proved that the 0.01 M NaHCO3 with polyphenol in simulated body fluid solution enhanced the deposition of bio-minerals and even distribution on the surface of scaffold. The in vitro studies demonstrated that the attached cells on the bioactive surface showed the enhanced osteogenic differentiation and secretion of pro-angiogenic factors. Finally, the scaffold with bioactive surface not only improved the regenerated volume of bone tissues but also increased neovessel formation after in vivo implantation onto mouse calvarial defect.