RESUMEN
This study presents an innovative inline metasurface design for selective wavelength transmission and focusing. When integrated into optical fibers, it improves the stability and compatibility with techniques like wavelength division multiplexing and phase modulation. Precise parameters, determined through analytical calculations and simulations, allow for the design of multifunctional lenses within the optical fiber platform. The numerical results demonstrate unmodulated transmission for specific wavelengths, while others exhibit standing wave focusing with a 0.67 µm beam radius and a 0.31 µm depth of focus. This technology holds promise for applications in quantum experiments, sensing, and optical communication.
RESUMEN
Radially polarized light has various advantages on sensing, thanks for its symmetric field distribution. To select radial component, metallic sub-wavelength concentric arrays are widely used. To increase the stability of the metallic nanostructure from mechanical or chemical hazards, a method to apply an additional protective layer has been proposed. The structure was numerically calculated, and optimized structure showed ~97.4% of transmittance for radially polarized component with ~20 dB of polarization extinction ratio compared to the azimuthally polarized component. This result is a 22% increase compared to the case without the protective layer. In addition, the utility the protective layer applied to metallic sub-wavelength concentric arrays is also discussed. The structure has been applied to a binary, concentric optical plate, and showed the same function with radially polarized input, but prohibited azimuthally polarized input. The proposed structure is expected to be applied on numerous centrosymmetric flat optical components.
RESUMEN
Line focusing, which collects light into a line rather than a single point, has an advantage on variable fields such as machining and imaging. The 1-dimensional metallic zone plate is one of the candidates for line focusing, which is ultra-thin and simple to fabricate. Metallic nano-slits can replace the metal blocked region to increase the efficiency, however, the efficiency and stability are still low. Therefore, this paper proposes a structure with an additional dielectric layer to protect the metallic nano-slit layer-a buried metallic wire structure-and verify the idea based on numerical simulations. Two structures are proposed. In terms of stability, a flat surface structure is proposed and a corrugated surface structure with a consistent thickness with the nano-slit is proposed which has low fabrication difficulty. The optimization of the buried wire structure and performance after applying the buried wire structure to the dual-line focusing plate is calculated by numerical simulation. Finally, it was shown that the electric field intensity was 2.13 times greater.
RESUMEN
Using micro-optic collimator technology, we present compact, low-loss optical interconnection devices for hollow core fibers (HCFs). This approach is one of the key manufacturing platforms for commercially available fiber optic components and most forms of HCFs can readily be incorporated into this platform without the need for any substantial or complicated adaptation or physical deformation of the fiber structure. Furthermore, this technique can provide for very low Fresnel reflection interconnection between solid-core fiber and HCF and in addition provides a hermetic seal for HCFs, which can be a critical issue for many HCF applications. In this paper, several exemplar HCF components are fabricated with low insertion loss (0.5-2 dB), low Fresnel reflection (-45 dB) and high modal purity (>20 dB) using various state-of-the-art HCFs.
RESUMEN
A binary metallic superoscillatory lens assisted with annular subwavelength slits is proposed, which generates a longitudinally-polarized super-resolution focal point. The annular slits are designed to selectively transmit radially-polarized light. Simulations using the finite element method show a 0.24 λ focal spot with 21.8 dB of polarization purity and only 0.342 dB reduction in efficiency compared to a standard superoscillatory lens.
RESUMEN
We report the intermittent burst of a super rogue wave in the multi-soliton (MS) regime of an anomalous-dispersion fiber ring cavity. We exploit the spatio-temporal measurement technique to log and capture the shot-to-shot wave dynamics of various pulse events in the cavity, and obtain the corresponding intensity probability density function, which eventually unveils the inherent nature of the extreme events encompassed therein. In the breathing MS regime, a specific MS regime with heavy soliton population, the natural probability of pulse interaction among solitons and dispersive waves exponentially increases owing to the extraordinarily high soliton population density. Combination of the probabilistically started soliton interactions and subsequently accompanying dispersive waves in their vicinity triggers an avalanche of extreme events with even higher intensities, culminating to a burst of a super rogue wave nearly ten times stronger than the average solitons observed in the cavity. Without any cavity modification or control, the process naturally and intermittently recurs within a time scale in the order of ten seconds.
RESUMEN
We propose and investigate a metallic Fresnel zone plate (FZP/MFZP) implemented on a silver-coated optical fiber facet for super-variable focusing of light, the focal point of which can be drastically relocated by varying the wavelength of the incident light. We numerically show that when its nominal focal length is set to 20 µm at 550 nm, its effective focal length can be tuned by ~13.7 µm for 300-nm change in the visible wavelength range. This tuning sensitivity is over 20 times higher than that of a conventional silica-based spherical lens. Even with such high tuning sensitivity with respect to the incident wavelength change, the effective beam radius at the focal point is preserved nearly unchanged, irrespective of the incident wavelength. Then, we fabricate the proposed device, exploiting electron- and focused-ion-beam processes, and experimentally verify its super-variable focusing functionality at typical red, green, and blue wavelengths in the visible wavelength range, which is in good agreement with the numerical prediction. Moreover, we propose a novel MFZP structure that primarily exploits the surface-plasmon-polariton-mediated, extra-ordinary transmission effect. For this we make all the openings of an MFZP, which are determined by the fundamental FZP design formula, be partitioned by multi-rings of all-sub-wavelength annular slits, so that the transmission of azimuthally polarized light is inherently prohibited, thereby leading to super-variable and selective focusing of radially polarized light. We design and fabricate a proof-of-principle structure implemented on a gold-coated fused-silica substrate, and verify its novel characteristics both numerically and experimentally, which are mutually in good agreement. We stress that both the MFZP structures proposed here will be very useful for micro-machining, optical trapping, and biomedical sensing, in particular, which invariably seek compact, high-precision, and flexible focusing schemes.
RESUMEN
We propose a fiber-optic-plasmonic hybrid device that is based on a corrugation-assisted metal-coated angled fiber facet (CA-MCAFF) for wavelength-dependent off-axis directional beaming (WODB). The device breaks into two key structures: One is the MCAFF structure, which is a modified Kretschmann configuration implemented onto a fiber platform, thereby being able to generate a unidirectional surface plasmon with dramatically enhanced properties in terms of non-confined diffracted radiation loss and operational bandwidth. The other is the periodic corrugation structure put on the MCAFF, thereby enabling WODB functionality out of the whole structures. The corrugated metal surface out-couples the surface plasmon mode to free-space optical radiation into a direction that varies with the wavelength of the optical radiation with excellent linearity. We perform extensive numerical investigations based on the finite-element-method and analyze the out-coupling efficiency (OCEout) and spectral bandwidth (SBout) of the proposed device for various designs and conditions. We determine the seven structural parameters of the device via taking sequential optimization steps. We deduce two optimal conditions particularly for the fiber-facet angle, in terms of the averaged OCEout or the SBout in the whole visible wavelength range (400 - 700 nm), which eventually leads to OCEout = 30.4% and SBout = 230 nm or to OCEout = 24.5% and SBout = 245 nm, respectively. These results suggest substantial enhancements in both OCEout and SBout, in comparison with the performance properties of a typical nano-slit-based device having a similar type of WODB functionality. The proposed CA-MCAFF is a simple, compact and efficient WODB device that is fully compatible with the state-of-the-art optical fiber technology.
RESUMEN
We numerically investigate quasi-mode-locked (QML) multi-pulse dynamics in a fiber ring laser cavity in the anomalous dispersion regime. We show that the laser cavity can operate in five constitutively different QML regimes, depending on the saturation power of the saturable absorber element and the length of the passive fiber section that parameterize the overall nonlinearity and dispersion characteristic of the laser cavity. We classify them into the incoherent noise-like-pulse, partially-coherent noise-like-pulse, symbiotic, partially-coherent multi-soliton, and coherent multi-soliton regimes, accounting for their coherence and multi-pulse formation features. In particular, we numerically clarify and confirm the symbiotic regime for the first time to the best of our knowledge, in which noise-like pulses and multi-solitons coexist stably in the cavity that has recently been observed experimentally. Furthermore, we analyze the shot-to-shot coherence characteristics of the individual QML regimes relative to the amount of the nonlinear-phase shift per roundtrip, and verify a strong correlation between them. We also show that the net-cavity dispersion plays a critical role in determining the multi-pulse dynamics out of the partially-coherent noise-like-pulse, symbiotic, and partially-coherent multi-soliton regimes, when the cavity bears moderate nonlinearity. We quantify and visualize all those characteristics onto contour maps, which will be very useful and helpful in discussing and clarifying the complex QML dynamics.
RESUMEN
We propose a novel trench-assisted circular metal nano-slit (CMNS) structure implementable on a fiber platform for the generation of a low-noise cylindrical surface plasmon (CSP) hotspot. We design trench structures based on a multi-pole cancellation method in order that a converging surface plasmon signal is well separated from co-propagating non-confined diffracted light (NCDL) at the hotspot location. In fact, the secondary radiation by the quasi-pole oscillation at the edge of the trench cancels the primary NCDL, thereby enhancing the signal-to-noise ratio (SNR) of the CSP hotspot. In particular, we investigate two types of trench structures: a rectangular-trench (RT) structure and an asymmetric-parabolic-trench (APT) structure, which are considered for the sake of the simplicity of fabrication and of the maximal enhancement of the SNR, respectively. In comparison with a conventional CMNS having no trenches, we highlight that the mean SNR of the CSP hotspot is enhanced by 6.97 and 11.89 dB in case of the optimized RT and APT CMNSs, respectively. The proposed schemes are expected to be useful for increasing the SNR of plasmonic devices that are interfered by NCDL, such as various types of nano-slits for generating high-resolution plasmonic signals, for example.
RESUMEN
We propose a simple and efficient light launch scheme for a helical-core fiber (HCF) by using an adiabatically tapered splice technique, through which we overcome its inherent difficulty with light launch owing to the large lateral offset and angular tilt of its core. We experimentally demonstrate single-mode excitation in the HCF in this configuration, which yields the coupling efficiency of around -5.9 dB (26%) for a ~1.1-µm light input when the splice joint is tapered down to 30 µm in diameter. To our knowledge, this is the first proof-of-principle report on the fusion-splice coupling between an HCF and a conventional single-mode fiber.