Controlling supramolecular copolymerization of alkynylplatinum(ii) terpyridine complexes: from isodesmic to cooperative mechanisms.

Recently, cooperative supramolecular polymerization has garnered considerable attention due to its significant potential for enabling controlled chain-growth polymerization, which offers a route to achieving a well-defined degree of polymerization and low polydispersity. In this study, we synthesized two distinct alkynylplatinum(ii) complexes, one bearing a saturated long alkyl chain (Pt-Sat-C18) and another containing a diacetylene moiety within a long alkyl chain (Pt-DA-C25). Spectroscopic analyses revealed that Pt-Sat-C18 undergoes supramolecular polymerization via an isodesmic pathway, while Pt-DA-C25 assembles cooperatively. Intriguingly, the mechanism of supramolecular copolymerization could be tuned by varying the composition ratios: transitioning from an isodesmic to a cooperative pathway was achieved by increasing the proportion of Pt-DA-C25. Moreover, UV irradiation prompted a shift from an isodesmic to a cooperative assembly mechanism. Morphologically, self-assembled Pt-Sat-C18 resulted in left-handed fibrillar structures, whereas Pt-DA-C25 led to left-handed tubular assemblies. Supramolecular co-assembly further revealed helical ribbon or tubular structures. Photoluminescent properties were also observed, with emission spectra centered at approximately 650 nm, attributed to the formation of excimer species facilitated by strong Pt⋯Pt interactions. To elucidate the mechanisms underlying these supramolecular polymerizations, temperature-dependent UV-visible spectroscopy was conducted during the cooling/heating processes, and thermodynamic parameters for both isodesmic and cooperative pathways were quantitatively assessed through curve fitting.

Revealing microscopic dynamics: in situ liquid-phase TEM for live observations of soft materials and quantitative analysis via deep learning.

In various domains spanning materials synthesis, chemical catalysis, life sciences, and energy materials, in situ transmission electron microscopy (TEM) methods exert a profound influence. These methodologies enable the real-time observation and manipulation of gas-phase and liquid-phase reactions at the nanoscale, facilitating the exploration of pivotal reaction mechanisms. Fundamental research areas like crystal nucleation, growth, etching, and self-assembly have greatly benefited from these techniques. Additionally, their applications extend across diverse fields such as catalysis, batteries, bioimaging, and drug delivery kinetics. However, the intricate nature of 'soft matter' presents a challenge due to the unique molecular properties and dynamic behavior of these substances that remain insufficiently understood. Investigating soft matter within in situ liquid-phase TEM settings demands further exploration and advancement compared to other research domains. This research harnesses the potential of in situ liquid-phase TEM technology while integrating deep learning methodologies to comprehensively analyze the quantitative aspects of soft matter dynamics. This study centers on diverse phenomena, encompassing surfactant molecule nucleation, block copolymer behavior, confinement-driven self-assembly, and drying processes. Furthermore, deep learning techniques are employed to precisely analyze Ostwald ripening and digestive ripening dynamics. The outcomes of this study not only deepen the understanding of soft matter at its fundamental level but also serve as a pivotal foundation for developing innovative functional materials and cutting-edge devices.

Association between Smoking Status and the Risk of Hip Fracture in Patients with Type 2 Diabetes: A Nationwide Population-Based Study.

BACKGRUOUND: Limited longitudinal evidence exists regarding the potential association between smoking status and hip fracture among individuals with type 2 diabetes. We investigated this association using large-scale, nationwide cohort data for the Korean population. METHODS: This nationwide cohort study included 1,414,635 adults aged 40 and older who received Korean National Health Insurance Service health examinations between 2009 and 2012. Subjects with type 2 diabetes were categorized according to their smoking status, amount smoked (pack-years), number of cigarettes smoked per day, and duration of smoking. The results are presented as hazard ratios (HRs) and 95% confidence intervals (CIs) for the associations between smoking status parameters and risk of hip fracture in multivariable Cox proportional hazard regression analysis. RESULTS: Compared with never-smokers, an increased adjusted HR (aHR) for hip fracture was observed in current smokers (1.681; 95% CI, 1.578 to 1.791), and a comparable aHR for hip fracture was found in former smokers (1.065; 95% CI, 0.999 to 1.136). For former smokers who had smoked 20 pack-years or more, the risk was slightly higher than that for never-smokers (aHR, 1.107; 95% CI, 1.024 to 1.196). The hip fracture risk of female former smokers was similar to that of female current smokers, but the hip fracture risk in male former smokers was similar to that of male never-smokers. CONCLUSION: Smoking is associated with an increased risk of hip fracture in patients with type 2 diabetes. Current smokers with diabetes should be encouraged to quit smoking because the risk of hip fracture is greatly reduced in former smokers.

TRIM22 facilitates autophagosome-lysosome fusion by mediating the association of GABARAPs and PLEKHM1.

Tripartite motif (TRIM) proteins are a large family of E3 ubiquitin ligases implicated in antiviral defense systems, tumorigenesis, and protein quality control. TRIM proteins contribute to protein quality control by regulating the ubiquitin-proteasome system, endoplasmic reticulum-associated degradation, and macroautophagy/autophagy. However, the detailed mechanisms through which various TRIM proteins regulate downstream events have not yet been fully elucidated. Herein, we identified a novel function of TRIM22 in the regulation of autophagy. TRIM22 promotes autophagosome-lysosome fusion by mediating the association of GABARAP family proteins with PLEKHM1, thereby inducing the autophagic clearance of protein aggregates, independent of its E3 ubiquitin ligase activity. Furthermore, a TRIM22 variant associated with early-onset familial Alzheimer disease interferes with autophagosome-lysosome fusion and autophagic clearance. These findings suggest TRIM22 as a critical autophagic regulator that orchestrates autophagosome-lysosome fusion by scaffolding autophagy-related proteins, thus representing a potential therapeutic target in neurodegenerative diseases.Abbreviations: AD: Alzheimer disease; ADAOO: AD age of onset; AICD: APP intracellular domain; APP: amyloid beta precursor protein; BSA: bovine serum albumin; cDNAs: complementary DNAs; CQ: chloroquine; CTF: carboxyl-terminal fragment; EBSS: Earle's balanced salt solution; GABARAP: GABA type A receptor-associated protein; GST: glutathione S-transferase; HA: hemagglutinin; HOPS: homotypic fusion and protein sorting; IFN: interferon; IL1A/IL-1α: interleukin 1 alpha; KO: knockout; MTORC1: mechanistic target of rapamycin kinase complex 1; NFKBIA/IκBα: NFKB inhibitor alpha; NFE2L2/NRF2: NFE2 like bZIP transcription factor; PBS: phosphate-buffered saline; PI3K: class I phosphoinositide 3-kinase; PLA: proximity ligation assay; PLEKHM1: pleckstrin homology and RUN domain containing M1; PSEN1: presenilin 1; SEM: standard errors of the means; SNAREs: soluble N-ethylmaleimide-sensitive factor attachment protein receptors; SNCA: synuclein alpha; SNP: single nucleotide polymorphism; TBS: tris-buffered saline; TNF/TNF-α: tumor necrosis factor; TRIM: tripartite motif; ULK1: unc-51 like autophagy activating kinase 1; WT: wild-type.

Ammonia Adsorption Performance of Zeolitic Imidazolate Frameworks for Cooling.

Promoting the cooling performance of adsorption chillers (ACs) greatly relies on the exploration of high-performance adsorbent/refrigerant working pairs. Ammonia is not only an environmentally friendly refrigerant but also favorable for heat and mass transfer in ACs owing to its large vapor pressure and enthalpy of evaporation. Zeolite imidazolate frameworks (ZIFs) with excellent ammonia stability are identified as a class of potential adsorbents for practical ammonia-based ACs. However, high-performing ZIF/ammonia working pairs with excellent AC performance are still to be developed. In this work, the cooling performance including the coefficient of performance for cooling (COPC) and the specific cooling effects (SCEs) of 26 ZIFs with the same composites but different topologies was evaluated by combining molecular simulation and mathematical modeling. Five high-performing ZIFs with COPC > 0.45 and SCE > 250 kJ/kg were identified, among which gis-ZIF with the highest COPC of 0.51 and lta-ZIF with the highest SCE of 354 kJ/kg both are promising to be synthesized and applied further. Besides, the quantitative structure-performance relationship (QSPR) was extracted that can help quickly identify and design high-performing ZIFs according to their ammonia adsorption isotherms and structural characteristics. Moreover, "S"-shaped adsorption isotherms with high saturation adsorption capacity (>0.2 g/g), suitable step position (0.2-0.4), and relatively low Henry's constant (<1 × 10-5 mol/(kg·Pa)) are more favorable for excellent COPC and SCE. From the perspective of structure characteristics, ZIFs possessing low crystal density (<0.9 g/cm3), high accessible surface area (>2000 m2/g), balanced largest cavity diameter (∼15 Å), and accessible pore volume (∼0.65 cm3/g) are beneficial for high-efficient cooling performance.

Transcriptome Profiling of Etridiazole-Exposed Zebrafish (Danio rerio) Embryos Reveals Pathways Associated with Cardiac and Ocular Toxicities.

Etridiazole (EDZ) is a thiadiazole-containing fungicide commonly used to control Pythium and Phytophthora spp. Although previous studies have shown that EDZ is teratogenic, the exact molecular mechanisms underlying its toxicity remain unknown. In this study, a zebrafish (Danio rerio; ZF) model was used to explore the molecular pathways associated with EDZ toxicity. The whole transcriptome of ZF embryos exposed to 96 h of EDZ was analyzed, along with developmental abnormalities. EDZ-induced malformations were primarily related to the eyes, heart, and growth of the ZF. Compared to untreated ZF, etridiazole-treated ZF had 2882 differentially expressed genes (DEGs), consisting of 1651 downregulated genes and 1231 upregulated genes. Gene ontology enrichment analysis showed that DEGs were involved in biological processes, such as sensory perception, visual perception, sensory organ development, and visual system development, and showed transmembrane transporter and peptidase regulator activities. Metabolism, phototransduction, aminoacyl-tRNA biosynthesis, MAPK signaling pathway, calcium signaling pathway, and vascular smooth muscle contraction were among the most enriched KEGG pathways. The qPCR analyses of the eight random genes were in good agreement with the transcriptome data. These results suggest several putative mechanisms underlying EDZ-induced developmental deformities in ZF.

Understanding ZIF particle chemical etching dynamics and morphology manipulation: in situ liquid phase electron microscopy and 3D electron tomography application.

In situ liquid phase transmission electron microscopy (TEM) and three-dimensional electron tomography are powerful tools for investigating the growth mechanism of MOFs and understanding the factors that influence their particle morphology. However, their combined application to the study of MOF etching dynamics is limited due to the challenges of the technique such as sample preparation, limited field of view, low electron density, and data analysis complexity. In this research, we present a study employing in situ liquid phase TEM to investigate the etching mechanism of colloidal zeolitic imidazolate framework (ZIF) nanoparticles. The etching process involves two distinct stages, resulting in the development of porous structures as well as partially and fully hollow morphologies. The etching process is induced by exposure to an acid solution, and both in situ and ex situ experiments demonstrate that the outer layer etches faster leading to overall volume shrinking (stage I) while the inner layer etches faster giving a hollow morphology (stage II), although both the outer layer and inner layer have been etched in the whole process. 3D electron tomography was used to quantify the properties of the hollow structures which show that the ZIF-67 crystal etching rate is larger than that of the ZIF-8 crystal at the same pH value. This study provides valuable insights into MOF particle morphology control and can lead to the development of novel MOF-based materials with tailored properties for various applications.

Transcriptome Analysis of Thiram-Treated Zebrafish (Danio rerio) Embryos Reveals Disruption of Reproduction Signaling Pathways.

Thiram, a dithiocarbamate fungicide, is used for the treatment of various fungal infections affecting crops and ornamentals. However, thiram-associated toxicity has been reported in animals, including fish, and the underlying molecular mechanisms are unclear. Herein, we employed zebrafish (ZF) to gain further insights into thiram toxicity-associated molecular mechanisms. We studied developmental abnormalities and performed whole-transcriptome analysis of ZF embryos exposed to thiram for 96 h. Embryos exposed to 4.0 µg/L thiram exhibited several phenotypic abnormalities, including bradycardia, spinal curvature, hatching arrest, and growth retardation. Whole-transcriptome analysis revealed 1754 differentially expressed genes (DEGs), with 512 upregulated and 1242 downregulated DEGs. The majority of biological processes affected by thiram were metabolic. Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis yielded terms related to reproduction, such as steroid biosynthesis and steroid hormone biosynthesis. Quantitative real-time polymerase chain reaction validation results were in line with sequencing data for ten DEGs. The study results improve our current understanding of the effects of thiram exposure in ZF.

The effect of tensile strain in Pd-Ni core-shell nanocubes with tuneable shell thickness on urea electrolysis selectivity.

Expanding our understanding of the structure-performance relationship in nanoscale electrocatalysts for urea electrolysis is crucial for efficient urea waste treatment and concomitant cathodic hydrogen production or CO2 reduction. Here, we elucidate the effect of the lattice strain in Pd-Ni core-shell nanocubes on the dominance of urea overoxidation pathway.

Strategy of Patient-Specific Therapeutics in Cardiovascular Disease Through Single-Cell RNA Sequencing.

Recently, single cell RNA sequencing (scRNA-seq) technology has enabled the discovery of novel or rare subtypes of cells and their characteristics. This technique has advanced unprecedented biomedical research by enabling the profiling and analysis of the transcriptomes of single cells at high resolution and throughput. Thus, scRNA-seq has contributed to recent advances in cardiovascular research by the generation of cell atlases of heart and blood vessels and the elucidation of mechanisms involved in cardiovascular development and diseases. This review summarizes the overall workflow of the scRNA-seq technique itself and key findings in the cardiovascular development and diseases based on the previous studies. In particular, we focused on how the single-cell sequencing technology can be utilized in clinical field and precision medicine to treat specific diseases.

Associations of stroke with all-cause and cause-specific mortality: A population-based matched cohort study.

BACKGROUND: This study aimed to assess the specific associations between stroke and all-cause and cause-specific mortality among Korean adults. METHODS: We used data extracted from the Korean National Health Insurance claims database from 2002 to 2013, including information on individuals with or without stroke aged 20 years and older. Patients with intracerebral hemorrhage, ischemic stroke or unspecified stroke were classified as stroke patients, while a reference population matched in terms of sex and age were also selected. The outcomes were all-cause mortality, natural causes of death (i.e. all natural causes, death by stroke and death by other diseases) and suicide. Survival analysis was performed using the Cox proportional hazards model. RESULTS: Of the 73 150 eligible participants-including 14 630 stroke patients and 58 520 age- and sex-matched controls-11 121 (15.2%) died during the study period. Of them, 10 513 participants (94.5%) died of natural causes, including 1653 (14.5%) who died due to stroke and 8860 (79.7%) who died due to other diseases. Two hundred and fifty patients (2.2%) died by suicide. Stroke patients showed higher adjusted hazard ratios (HR) for all-cause (HR = 6.48, 95% CI, 3.87-10.86), all-natural-cause (HR = 2.68, 95% CI, 2.53-2.84), stroke (HR = 21.16, 95% CI, 17.49-25.61), other disease (HR = 1.69, 95% CI, 1.58-1.81) and suicide mortality (HR = 3.34, 95% CI, 2.24-4.98) than those without stroke. The effect size of stroke for suicide mortality was greater than that for other causes of mortality (except stroke mortality). CONCLUSIONS: Stroke was associated with a higher risk of all-cause, natural cause and suicide mortality; stroke was more strongly associated with risk of suicide mortality than with any mortality for any other causes. From a policy standpoint, these results suggest the need for greater supportive care to prevent unnatural deaths among stroke patients.

Advanced maternal age and severe maternal morbidity in South Korea: a population-based cohort study.

To investigate the association between maternal age and severe maternal morbidity (SMM) in a Korean population. Data for cases of delivery between 2003 and 2019 were extracted from the Korean National Health Insurance Service-National Delivery Cohort. The main outcome was SMM, which was determined using the Center for Disease Control and Prevention's algorithm. A generalized estimating equation model with a log link was performed for the relationship between SMM and maternal age adjusted for covariates. SMM occurred in 40,959/2,113,615 (1.9%) of delivery cases. Teenagers and women 35 years and older had an increased risk of SMM in both nulliparous and multiparous cases (ages 15-19: risk ratio (RR) 1.32, 95% confidence interval (CI) 1.15-1.46; ages 35-39: RR 1.24, 95% CI 1.21-1.28; ages 40-44: RR 1.57, 95% CI 1.50-1.64; and ages 45 or older: RR 2.07, 95% CI 1.75-2.44). Women aged 40 years and older had the highest rates of SMM. In singleton births as well as in nulliparous and multiparous cases, teenagers and women aged 35 years and older had a particularly high risk of SMM. Identifying and managing risk factors for SMM in these vulnerable age groups may improve maternal health outcomes.

Photocatalytic Alkyl Addition to Access Quaternary Alkynyl α-Amino Esters.

A regioselective alkylation of ß,γ-alkynyl-α-imino esters by visible-light photocatalysis has been developed. This method enables 1,2-addition of methyl, primary, secondary, and tertiary alkyl radicals to the conjugated imines under mild conditions to produce a variety of quaternary alkynyl α-amino acid and cyclic amino acid motifs. Alkyl radicals are generated from alkyl bis(catecholato)silicates with an organic photocatalyst. This process is effective under an air atmosphere, providing operational benefits compared to conventional alkylation using organometallic reagents.

Periprosthetic Fracture around a Cemented Stem in Total Hip Arthroplasty.

The increase in the number of primary total hip arthroplasties that will be performed over the next several decades will lead to an increase in the incidence of periprosthetic fractures around the femoral stem. A search of targeted articles was conducted using on-line databases of PubMed (National Library of Medicine) and articles were obtained from January 2008 to November 2021. Reliable prediction of treatment can be achieved using the Vancouver classification; internal fixation is indicated in fractures involving a stable implant and revision arthroplasty is indicated in those with unstable prostheses. To the best of our knowledge, relatively fewer studies regarding periprosthetic proximal femur fractures of cemented stems have been reported. The focus of this review is on the risk factors and strategies for treatment of these fractures for periprosthetic femoral fractures around a cemented hip arthroplasty.

Assessment of acute and chronic toxicity of cyantraniliprole and sulfoxaflor on honey bee (Apis mellifera) larvae.

BACKGROUND: Recently, cyantraniliprole (CYA) and sulfoxaflor (SUL) have been considered as alternatives to neonicotinoid insecticides. In this study, we evaluated the acute and chronic toxicities of CYA and SUL on honey bee (Apis mellifera L.) larvae reared in vitro. RESULTS: In the acute toxicity test, the following test doses were used to determine the median lethal dose (LD50 ): CYA 0.007, 0.014, 0.028, 0.056 and 0.112 µg larva-1 ; SUL 2.5, 5, 10, 20 and 40 µg larva-1 . In the chronic toxicity test, the following test doses were used to determine the LD50 : CYA 0.00512, 0.0128, 0.032, 0.08 and 0.2 µg larva-1 ; SUL 0.0625, 0.125, 0.25, 0.5 and 1.0 µg larva-1 . The acute LD50 values of CYA and SUL were 0.047 and 11.404 µg larva-1 , respectively. Larvae acutely exposed to SUL had significantly lower body weight than controls, but those exposed to CYA showed no difference. The no observed adverse effect level (NOAEL) and LD50 values of the chronic toxicity tests for each insecticide were 0.00512 and 0.064 µg larva-1 for CYA, and 0.0625 µg larva-1 and 0.212 µg larva-1 for SUL, respectively. Larvae chronically exposed to SUL emerged as bees with deformed wings, reaching adult deformation rates of over 50%; however, CYA had no effect on adult deformation. CONCLUSION: Exposure to CYA increased larval mortality but did not cause any adult deformation, whereas SUL exposure increased pupal mortality and caused wing deformation in newly emerged bees. Our study may be useful for the assessment of pesticide toxicity by providing valuable findings on the effects of these insecticides on honey bee larvae. © 2022 Society of Chemical Industry.

Developmental Toxic Effects of Thiram on Developing Zebrafish (Danio rerio) Embryos.

Thiram, an oxidized dimer of dithiocarbamate, has fungicidal and ectoparasiticidal roles. This study aimed to determine the effects of thiram on the development of zebrafish (ZF) embryos. The developmental toxicity test was performed in accordance with the OECD 236 test guidelines, and ZF embryos were subjected to several thiram concentrations and a DMSO (0.01%) control. Subsequently, embryo mortalities and developmental anomalies were evaluated at different hours post fertilization (hpf). Thiram was highly toxic to ZF, with calculated median lethal concentrations (LC50) of thiram at 48 and 96 h as 13.10 ± 2.17 and 8.87 ± 2.09 µg/L, respectively. Thiram-treated embryos/larvae exhibited a variety of deformities, such as abnormal somites, reduced eye pigment, abnormal tail shape, yolk sac edema, hatching defects, and curved spines, with a median effective concentration (EC50) of 3.88 ± 1.23, 5.04 ± 1.82, 6.23 ± 0.92, 5.24 ± 2.22, 1.39 ± 0.25, and 2.60 ± 0.82 µg/L, respectively. Teratogenic index (TI) values ranged from 1.42 to 6.66 for the scored deformities. At 48 hpf, the average heartbeat of the control group was 177.20 ± 5.63 per minute, while the highest thiram-treated group (40 µg/L) was 99.50 ± 18.12 per minute. In addition, cardiac-related issues, such as pericardial edema and abnormal blood flow, were observed in thiram-treated ZF embryos. Overall, these findings suggest that thiram is teratogenic to ZF.

Synergistic Effect of MIL-101/Reduced Graphene Oxide Nanocomposites on High-Pressure Ammonia Uptake.

Ammonia has emerged as a potential working fluid in adsorption heat pumps (AHPs) for clean energy conversion. It would be necessary to develop an efficient adsorbent with high-density ammonia uptake under high gas pressures in the low-temperature range for waste heat. Herein, a porous nanocomposite with MIL-101(Cr)-NH2 (MIL-A) and reduced graphene oxide (rGO) was developed to enhance the ammonia adsorption capacity over high ammonia pressures (3-5 bar) and low working temperatures (20-40 °C). A one-pot hydrothermal reaction could form a two-dimensional sheet-like nanocomposite where MIL-A nanoparticles were well deposited on the surface of rGO. The MIL-A nanoparticles were shown to grow on the rGO surface through chemical bonding between chromium metal centers in MIL-A and oxygen species in rGO. We demonstrated that the nanocomposite with 2% GO showed higher ammonia uptake capacity at 5 bar compared with pure MIL-A and rGO. Our strategy to incorporate rGO with MIL-A nanoparticles would further be generalizable to other metal-organic frameworks for improving the ammonia adsorption capacity in AHPs.

Accuracy and efficiency of automatic tooth segmentation in digital dental models using deep learning.

This study evaluates the accuracy and efficiency of automatic tooth segmentation in digital dental models using deep learning. We developed a dynamic graph convolutional neural network (DGCNN)-based algorithm for automatic tooth segmentation and classification using 516 digital dental models. We segmented 30 digital dental models using three methods for comparison: (1) automatic tooth segmentation (AS) using the DGCNN-based algorithm from LaonSetup software, (2) landmark-based tooth segmentation (LS) using OrthoAnalyzer software, and (3) tooth designation and segmentation (DS) using Autolign software. We evaluated the segmentation success rate, mesiodistal (MD) width, clinical crown height (CCH), and segmentation time. For the AS, LS, and DS, the tooth segmentation success rates were 97.26%, 97.14%, and 87.86%, respectively (p < 0.001, post-hoc; AS, LS > DS), the means of MD widths were 8.51, 8.28, and 8.63 mm, respectively (p < 0.001, post hoc; DS > AS > LS), the means of CCHs were 7.58, 7.65, and 7.52 mm, respectively (p < 0.001, post-hoc; LS > DS, AS), and the means of segmentation times were 57.73, 424.17, and 150.73 s, respectively (p < 0.001, post-hoc; AS < DS < LS). Automatic tooth segmentation of a digital dental model using deep learning showed high segmentation success rate, accuracy, and efficiency; thus, it can be used for orthodontic diagnosis and appliance fabrication.

Silver-Nanoparticle-Assisted Modulation of NH3 Desorption on MIL-101.

Ammonia has recently emerged as a promising hydrogen carrier for renewable energy conversion. Establishing a better understanding and control of ammonia adsorption and desorption is necessary to improve future energy generation. Metal-organic frameworks (MOFs) have shown improved ammonia capacity and stability over conventional adsorbents such as silica and zeolite. However, ammonia desorption requires high temperature over 150 °C, which is not desirable for energy-efficient ammonia reuse and recycling. Here, we loaded silver nanoparticles from 6.6 to 51.4 wt% in MIL-101 (Ag@MIL-101) using an impregnation method to develop an efficient MOF-based hybrid adsorbent for ammonia uptake. The incorporation of metal nanoparticles into MIL-101 has not been widely explored for ammonia uptake, even though such hybrid nanostructures have significantly enhanced catalytic activities and gas sensing capacities. Structural features of Ag@MIL-101 with different Ag wt% were examined using transmission electron microscopy, X-ray powder diffraction, and infrared spectroscopy, demonstrating successful formation of silver nanoparticles in MIL-101. Ag@MIL-101 (6.6 wt%) showed hysteresis in the N2 isotherm and an increase in the fraction of larger pores, indicating that mesopores were generated during the impregnation. Temperature-programmed desorption with ammonia was performed to understand the binding affinity of ammonia molecules on Ag@MIL-101. The binding affinity was the lowest with Ag@MIL-101 (6.6 wt%), including the largest relative fraction in the amount of desorbed ammonia molecules. It was presumed that cooperative interaction between the silver nanoparticle and the MIL-101 framework for ammonia molecules could allow such a decrease in the desorption temperature. Our design strategy with metal nanoparticles incorporated into MOFs would contribute to develop hybrid MOFs that reduce energy consumption when reusing ammonia from storage.

Effect of Number of Household Members on Falls among Disabled Older People.

OBJECTIVES: To investigate the effect of the number of cohabitating household members on falls among an disabled aging Korean population. METHODS: We used data from the first to the fourth waves of the Korea Longitudinal Study of Aging. Using the first wave at baseline, data included 1414 individuals aged 45 years and older who needed assistance for performance of activities of daily living (ADL) or instrumental activities of daily living (IADL). We classified falls as overall falls, falls requiring medical treatment, and hip fractures caused by falls. The number of cohabitating family members was classified as none (living alone), one, two, or more. A generalized estimating equation with logit link was used to examine the association between the number of cohabitating household members with overall falls and injuries caused by falls. RESULTS: Compared to living with two or more household members, living alone was associated with higher odds of overall falls, falls needing medical treatment, and hip fractures caused by falls (odds ratio (OR) 2.13, 95% confidence interval [CI] 1.36-3.34; OR 2.13, 95% CI 1.28-3.53; OR 1.93, 95% CI 1.01-3.69, respectively). These associations were particularly strong in individuals with cognitive decline. Conclusions Living alone is associated with higher odds of overall falls, falls needing medical treatment, and hip fractures caused by falls, particularly for those with cognitive decline. CONCLUSIONS: Intervention programs to prevent falls in disabled, aging adults, especially those living alone and those with declined cognitive function, need to provide home care services and promote the use of safety equipment.