RESUMEN
Image-based deep learning (IBDL) is an advanced technique for predicting the surface irradiation conditions of laser surface processing technology. In pulsed-laser surface processing techniques, the number of superimposed laser shots is one of the fundamental and essential parameters that should be optimized for each material. Our primary research aims to build an adequate dataset using laser-irradiated surface images and to successfully predict the number of superimposed shots using the pre-trained deep convolutional neural network (CNN) models. First, the laser shot experiments were performed on copper targets using a nanosecond YAG laser with a wavelength of 532â nm. Then, the training data were obtained with the different superimposed shots of 1 to 1024 in powers of 2. After that, we used several pre-trained deep CNN models to predict the number of superimposed laser shots. Based on the dataset with 1936 images, VGG16 shows a high validation accuracy, higher sensitivity, and more than 99% precision than other deep CNN models. Utilizing the VGG16 model with high sensitivity could positively impact the industries' time, efficiency, and overall production.
RESUMEN
The shock ignition (SI) approach to inertial confinement fusion is a promising scheme for achieving energy production by nuclear fusion. SI relies on using a high intensity laser pulse (≈1016 W/cm2, with a duration of several hundred ps) at the end of the fuel compression stage. However, during laser-plasma interaction (LPI), several parametric instabilities, such as stimulated Raman scattering and two plasmon decay, nonlinearly generate hot electrons (HEs). The whole behavior of HE under SI conditions, including their generation, transport, and final absorption, is still unclear and needs further experimental investigation. This paper focuses on the development of an experimental platform for SI-related experiments, which simultaneously makes use of multiple diagnostics to characterize LPI and HE generation, transport, and energy deposition. Such diagnostics include optical spectrometers, streaked optical shadowgraph, an x-ray pinhole camera, a two-dimensional x-ray imager, a Cu Kα line spectrometer, two hot-electron spectrometers, a hard x-ray (bremsstrahlung) detector, and a streaked optical pyrometer. Diagnostics successfully operated simultaneously in single-shot mode, revealing the features of HEs under SI-relevant conditions.
RESUMEN
Magnetic reconnection is a universal process in space, astrophysical, and laboratory plasmas. It alters magnetic field topology and results in energy release to the plasma. Here we report the experimental results of a pure electron outflow in magnetic reconnection, which is not accompanied with ion flows. By controlling an applied magnetic field in a laser produced plasma, we have constructed an experiment that magnetizes the electrons but not the ions. This allows us to isolate the electron dynamics from the ions. Collective Thomson scattering measurements reveal the electron Alfvénic outflow without ion outflow. The resultant plasmoid and whistler waves are observed with the magnetic induction probe measurements. We observe the unique features of electron-scale magnetic reconnection simultaneously in laser produced plasmas, including global structures, local plasma parameters, magnetic field, and waves.
RESUMEN
This corrects the article DOI: 10.1103/PhysRevLett.126.015703.
RESUMEN
High energy density physics is the field of physics dedicated to the study of matter and plasmas in extreme conditions of temperature, densities and pressures. It encompasses multiple disciplines such as material science, planetary science, laboratory and astrophysical plasma science. For the latter, high energy density states can be accompanied by extreme radiation environments and super-strong magnetic fields. The creation of high energy density states in the laboratory consists in concentrating/depositing large amounts of energy in a reduced mass, typically solid material sample or dense plasma, over a time shorter than the typical timescales of heat conduction and hydrodynamic expansion. Laser-generated, high current-density ion beams constitute an important tool for the creation of high energy density states in the laboratory. Focusing plasma devices, such as cone-targets are necessary in order to focus and direct these intense beams towards the heating sample or dense plasma, while protecting the proton generation foil from the harsh environments typical of an integrated high-power laser experiment. A full understanding of the ion beam dynamics in focusing devices is therefore necessary in order to properly design and interpret the numerous experiments in the field. In this work, we report a detailed investigation of large-scale, kilojoule-class laser-generated ion beam dynamics in focusing devices and we demonstrate that high-brilliance ion beams compress magnetic fields to amplitudes exceeding tens of kilo-Tesla, which in turn play a dominant role in the focusing process, resulting either in a worsening or enhancement of focusing capabilities depending on the target geometry.
RESUMEN
Graphene is known as an atomically thin, transparent, highly electrically and thermally conductive, light-weight, and the strongest 2D material. We investigate disruptive application of graphene as a target of laser-driven ion acceleration. We develop large-area suspended graphene (LSG) and by transferring graphene layer by layer we control the thickness with precision down to a single atomic layer. Direct irradiations of the LSG targets generate MeV protons and carbons from sub-relativistic to relativistic laser intensities from low contrast to high contrast conditions without plasma mirror, evidently showing the durability of graphene.
RESUMEN
In situ femtosecond x-ray diffraction measurements and ab initio molecular dynamics simulations were performed to study the liquid structure of tantalum shock released from several hundred gigapascals (GPa) on the nanosecond timescale. The results show that the internal negative pressure applied to the liquid tantalum reached -5.6 (0.8) GPa, suggesting the existence of a liquid-gas mixing state due to cavitation. This is the first direct evidence to prove the classical nucleation theory which predicts that liquids with high surface tension can support GPa regime tensile stress.
RESUMEN
Turbulence is ubiquitous in the universe and in fluid dynamics. It influences a wide range of high energy density systems, from inertial confinement fusion to astrophysical-object evolution. Understanding this phenomenon is crucial, however, due to limitations in experimental and numerical methods in plasma systems, a complete description of the turbulent spectrum is still lacking. Here, we present the measurement of a turbulent spectrum down to micron scale in a laser-plasma experiment. We use an experimental platform, which couples a high power optical laser, an x-ray free-electron laser and a lithium fluoride crystal, to study the dynamics of a plasma flow with micrometric resolution (~1µm) over a large field of view (>1 mm2). After the evolution of a Rayleigh-Taylor unstable system, we obtain spectra, which are overall consistent with existing turbulent theory, but present unexpected features. This work paves the way towards a better understanding of numerous systems, as it allows the direct comparison of experimental results, theory and numerical simulations.
RESUMEN
We present results from the SPring-8 Angstrom Compact free electron LAser facility, where we used a high intensity (â¼10^{20} W/cm^{2}) x-ray pump x-ray probe scheme to observe changes in the ionic structure of silicon induced by x-ray heating of the electrons. By avoiding Laue spots in the scattering signal from a single crystalline sample, we observe a rapid rise in diffuse scattering and a transition to a disordered, liquidlike state with a structure significantly different from liquid silicon. The disordering occurs within 100 fs of irradiation, a timescale that agrees well with first principles simulations, and is faster than that predicted by purely inertial behavior, suggesting that both the phase change and disordered state reached are dominated by Coulomb forces. This method is capable of observing liquid scattering without masking signal from the ambient solid, allowing the liquid structure to be measured throughout and beyond the phase change.
RESUMEN
The scientific and technical advances continue to support novel discoveries by allowing scientists to acquire new insights into the structure and properties of matter using new tools and sources. Notably, neutrons are among the most valuable sources in providing such a capability. At the Institute of Laser Engineering, Osaka, the first steps are taken towards the development of a table-top laser-driven neutron source, capable of producing a wide range of energies with high brightness and temporal resolution. By employing a pure hydrogen moderator, maintained at cryogenic temperature, a cold neutron ([Formula: see text]) flux of [Formula: see text]/pulse was measured at the proximity of the moderator exit surface. The beam duration of hundreds of ns to tens of [Formula: see text] is evaluated for neutron energies ranging from 100s keV down to meV via Monte-Carlo techniques. Presently, with the upcoming J-EPoCH high repetition rate laser at Osaka University, a cold neutron flux in orders of [Formula: see text] is expected to be delivered at the moderator in a compact beamline.
RESUMEN
The formation of high energy density matter occurs in inertial confinement fusion, astrophysical, and geophysical systems. In this context, it is important to couple as much energy as possible into a target while maintaining high density. A recent experimental campaign, using buried layer (or "sandwich" type) targets and the ultrahigh laser contrast Vulcan petawatt laser facility, resulted in 500 Mbar pressures in solid density plasmas (which corresponds to about 4.6×10^{7}J/cm^{3} energy density). The densities and temperatures of the generated plasma were measured based on the analysis of x-ray spectral line profiles and relative intensities.
RESUMEN
Increasing the laser energy absorption into energetic particle beams represents a longstanding quest in intense laser-plasma physics. During the interaction with matter, part of the laser energy is converted into relativistic electron beams, which are the origin of secondary sources of energetic ions, γ-rays and neutrons. Here we experimentally demonstrate that using multiple coherent laser beamlets spatially and temporally overlapped, thus producing an interference pattern in the laser focus, significantly improves the laser energy conversion efficiency into hot electrons, compared to one beam with the same energy and nominal intensity as the four beamlets combined. Two-dimensional particle-in-cell simulations support the experimental results, suggesting that beamlet interference pattern induces a periodical shaping of the critical density, ultimately playing a key-role in enhancing the laser-to-electron energy conversion efficiency. This method is rather insensitive to laser pulse contrast and duration, making this approach robust and suitable to many existing facilities.
RESUMEN
Water, methane, and ammonia are commonly considered to be the key components of the interiors of Uranus and Neptune. Modelling the planets' internal structure, evolution, and dynamo heavily relies on the properties of the complex mixtures with uncertain exact composition in their deep interiors. Therefore, characterising icy mixtures with varying composition at planetary conditions of several hundred gigapascal and a few thousand Kelvin is crucial to improve our understanding of the ice giants. In this work, pure water, a water-ethanol mixture, and a water-ethanol-ammonia "synthetic planetary mixture" (SPM) have been compressed through laser-driven decaying shocks along their principal Hugoniot curves up to 270, 280, and 260 GPa, respectively. Measured temperatures spanned from 4000 to 25000 K, just above the coldest predicted adiabatic Uranus and Neptune profiles (3000-4000 K) but more similar to those predicted by more recent models including a thermal boundary layer (7000-14000 K). The experiments were performed at the GEKKO XII and LULI2000 laser facilities using standard optical diagnostics (Doppler velocimetry and optical pyrometry) to measure the thermodynamic state and the shock-front reflectivity at two different wavelengths. The results show that water and the mixtures undergo a similar compression path under single shock loading in agreement with Density Functional Theory Molecular Dynamics (DFT-MD) calculations using the Linear Mixing Approximation (LMA). On the contrary, their shock-front reflectivities behave differently by what concerns both the onset pressures and the saturation values, with possible impact on planetary dynamos.
RESUMEN
High resolution X-ray imaging is crucial for many high energy density physics (HEDP) experiments. Recently developed techniques to improve resolution have, however, come at the cost of a decreased field of view. In this paper, an innovative experimental detector for X-ray imaging in the context of HEDP experiments with high spatial resolution, as well as a large field of view, is presented. The platform is based on coupling an X-ray backligther source with a Lithium Fluoride detector, characterized by its large dynamic range. A spatial resolution of 2 µm over a field of view greater than 2 mm2 is reported. The platform was benchmarked with both an X-ray free electron laser (XFEL) and an X-ray source produced by a short pulse laser. First, using a non-coherent short pulse laser-produced backlighter, reduced penumbra blurring, as a result of the large size of the X-ray source, is shown. Secondly, we demonstrate phase contrast imaging with a fully coherent monochromatic XFEL beam. Modeling of the absorption and phase contrast transmission of X-ray radiation passing through various targets is presented.
RESUMEN
A large-aperture high-sensitivity image intensifier panel that consists of an avalanche photodiode array and a light-emitting diode array is presented. The device has 40% quantum efficiency, over 104 optical gain, and 80-ns time resolution. The aperture size of the device is 20 cm, and with the current manufacturing process, it can be scaled to arbitrarily larger sizes. The device can intensify the light from a single particle scintillation emission to an eye-visible bright flash. The image resolution of the device is currently limited by the size of the avalanche photodiode that is 2 mm, although it can be scaled to smaller sizes in the near future. The image intensifier is operated at a small voltage, typically +57 V. The device can be applied to various applications, such as scintillation imaging, night vision cameras, and an image converter from non-visible light (such as infrared or ultraviolet) to visible light.
RESUMEN
The use of gas cluster media as a target for an intense femtosecond laser pulses is considered to be uniquely convenient approach for the development of a compact versatile pulsed source of ionizing radiation. Also, one may consider cluster media as a nanolab to investigate fundamental issues of intense optical fields interaction with sub-wavelength scale structures. However, conventional diagnostic methods fail to register highly charged ion states from a cluster plasma because of strong recombination in the ambient gas. In the paper we introduce high-resolution X-ray spectroscopy method allowing to study energy spectra of highly charged ions created in the area of most intense laser radiation. The emission of CO2 clusters were analyzed in experiments with 60 fs 780 nm laser pulses of 1018 W/cm2 intensity. Theory and according X-ray spectra modeling allows to reveal the energy spectra and yield of highly charged oxygen ions. It was found that while the laser of fundamental frequency creates commonly expected monotonic ion energy spectrum, frequency doubled laser radiation initiates energy spectra featuring of distinctive quasi-monoenergetic peaks. The later would provide definite advantage in further development of laser-plasma based compact ion accelerators.
RESUMEN
In this 4-year follow-up study including 1083 subjects (≥ 60 years), the prevalence of frailty was estimated to be 5.6%; osteoporosis was found to be significantly associated with frailty. Moreover, the presence of both osteoporosis and sarcopenia increased the risk of frailty compared to the presence of osteoporosis or sarcopenia alone. INTRODUCTION: This study aims to examine the contribution of sarcopenia and osteoporosis to the occurrence of frailty using 4-year follow-up information of a population-based cohort study. METHODS: The second survey of the Research on Osteoarthritis/Osteoporosis Against Disability (ROAD) study was conducted between 2008 and 2010; 1083 subjects (aged ≥ 60 years, 372 men, 711 women) completed all examinations on frailty, sarcopenia, and osteoporosis, which were defined using Fried's definition, Asian Working Group for Sarcopenia criteria, and WHO criteria, respectively. The third survey was conducted between 2012 and 2013; 749 of 1083 individuals enrolled from the second survey (69.2%, 248 men, 501 women) completed assessments identical to those in the second survey. RESULTS: The prevalence of frailty in the second survey was 5.6% (men, 3.8%; women, 6.6%). The cumulative incidence of frailty was 1.2%/year (men, 0.8%/year; women, 1.3%/year). After adjustment for confounding factors, logistic regression analysis indicated that osteoporosis was significantly associated with the occurrence of frailty (odds ratio, 3.07; 95% confidence interval, 1.26-7.36; p = 0.012). Moreover, the occurrence of frailty significantly increased according to the presence of osteoporosis and sarcopenia (odds ratio vs. neither osteoporosis nor sarcopenia: osteoporosis alone, 2.50; osteoporosis and sarcopenia, 5.80). CONCLUSIONS: Preventing osteoporosis and coexistence of osteoporosis and sarcopenia may help reduce the risk of frailty.