RESUMEN
In pursuit of understanding structure-property relationships for the melting point depression of binary eutectic mixtures, the influence of the anion on the solid-liquid (S-L) phase behavior was explored for mixtures of glutaric acid + tetraethylammonium chloride, bromide, and iodide. A detailed experimental evaluation of the S-L phase behavior revealed that the eutectic point is shifted toward lower temperatures and higher salt contents upon decreasing the ionic radius. The salt fusion properties were experimentally inaccessible owing to thermal decomposition. The data were inter- and extrapolated using various models for the Gibbs energy of mixing fitted to the glutaric-acid rich side only, which allowed for the assessment of the eutectic point. Fitting the experimental data to a two-parameter Redlich-Kister expansion with Flory entropy, the eutectic depth could be related to the ionic radius of the anion. The anion type, and in particular its size, can therefore be viewed as an important design parameter for the liquid window of other acid and salt-based deep eutectic solvents/systems.
RESUMEN
In this work, a statistical analysis was performed to reveal how the molecular properties are correlated with the nonideal behavior observed in eutectic mixtures. From this, a statistical model, combined with theory and experimental results, was developed to predict the nonideal behavior of a specific set of eutectic mixtures, consisting of quaternary ammonium bromides with dicarboxylic acids and polyols. The combination of this analysis and this model can be considered as a first step toward the a priori design of eutectic mixtures. The analysis performed is based on principal components. The descriptors used for this are molecular properties of the constituents of these mixtures. The molecular properties are a combination of experimental, theoretical, and computed properties. The analysis reveals that there are strong correlations between the nonideality of the mixtures and a measure of the acidity of the hydrogen bond donating protons, the displacement of the bromide anion, and the bulkiness of the quaternary ammonium salt. Our analysis highlights the design rules of deep eutectic systems (DES), enabling control over the extent of the liquid window. Our model enables prediction of the eutectic temperature for a range of related mixtures.
RESUMEN
The centrifuge method is a novel, equilibrium-based, analytical procedure that allows the construction of solid-liquid phase diagrams of binary eutectic mixtures. In this paper, the development, optimization, and successful verification of the centrifuge method are described. Contrary to common dynamic analysis techniques-differential scanning calorimetry and hot-stage microscopy-the studied mixtures are equilibrated at constant temperature. Therefore, the mixtures do not need to be recrystallized from the melt during analysis. This offers a great advantage for mixtures that exhibit strong supercooling behavior rather than direct crystallization. The centrifuge method was verified by reproducing the binary eutectic phase behavior of both the nearly ideal biphenyl-bibenzyl system and the strongly non-ideal deep eutectic solvent (DES) urea-choline chloride, which is prone to supercooling. Hence, the centrifuge method offers an alternative route to common dynamic analysis techniques for the quantification of the liquid range of DESs and other binary eutectic mixtures.
RESUMEN
Deep eutectic solvents (DESs) have been considered as a new class of green solvents with tunable physical properties based on the selective combination of their individual components. As the liquid window of a DES identifies the range of feasible applications, it is essential to determine, quantify, and predict their phase behavior. Phase diagrams were measured for systems consisting of tetrapentylammonium bromide and erythritol or succinic acid. Regular solution theory is applied to quantitatively describe the liquid window of DESs. The succinic acid mixture shows a larger deviation from ideal behavior, caused by the stronger hydrogen bond forming acid groups. The interaction parameter between the two DES components in regular solution theory could be determined directly from the eutectic temperature of the mixture and this enables quantification of the degree of non-ideality of DESs.
RESUMEN
Lignocellulosic biomass has gained extensive research interest due to its potential as a renewable resource, which has the ability to overtake oil-based resources. However, this is only possible if the fractionation of lignocellulosic biomass into its constituents, cellulose, lignin and hemicellulose, can be conducted more efficiently than is possible with the current processes. This article summarizes the currently most commonly used processes and reviews the fractionation with innovative solvents, such as ionic liquids and deep eutectic solvents. In addition, future challenges for the use of these innovative solvents will be addressed.